submilli-wasm 0.1.0

//! `Config` — engine/runtime configuration (wasmtime-compatible builder).

/// Global configuration for an [`crate::Engine`]. Builder methods return `&mut Self`.
#[allow(clippy::struct_excessive_bools)] // independent on/off knobs, mirroring `wasmtime::Config`
#[derive(Clone, Debug)]
pub struct Config {
    consume_fuel: bool,
    epoch_interruption: bool,
    max_wasm_stack: Option<usize>,
    collector: Collector,
    gc_memory_threshold: Option<usize>,
    gc_heap_reservation: u64,
    max_module_bytes: usize,
    async_support: bool,
    wasm_backtrace: bool,
    wasm_backtrace_details: WasmBacktraceDetails,
    debug_info: bool,
}

impl Default for Config {
    fn default() -> Self {
        Config {
            consume_fuel: false,
            epoch_interruption: false,
            max_wasm_stack: None,
            collector: Collector::default(),
            gc_memory_threshold: None,
            // A small pre-authorized GC budget by default, so a typical store's early allocation
            // doesn't suspend to the limiter on every batch; growth beyond it is limiter-gated.
            // Set to 0 for a limiter-strict store (every grow consults the limiter).
            gc_heap_reservation: 256 * 1024,
            // The untrusted-tier module-size ceiling (#32); a finite default, never unbounded.
            max_module_bytes: crate::module::DEFAULT_MAX_MODULE_BYTES,
            // Enabled by default (unlike wasmtime, where it's opt-in): this interpreter is
            // fiber-less, so an async-enabled store runs sync calls just as well, and defaulting
            // on lets embedders use `call_async`/`fuel_async_yield_interval` without an explicit
            // `async_support(true)`. Call `async_support(false)` to disable the async-only APIs.
            async_support: true,
            // wasmtime defaults: backtraces on, DWARF detail from the environment, no debug info.
            wasm_backtrace: true,
            wasm_backtrace_details: WasmBacktraceDetails::default(),
            debug_info: false,
        }
    }
}

impl Config {
    /// Creates a configuration with default settings.
    pub fn new() -> Self {
        Config::default()
    }

    /// Enables fuel consumption (metering). Off by default.
    pub fn consume_fuel(&mut self, enable: bool) -> &mut Self {
        self.consume_fuel = enable;
        self
    }

    /// Whether fuel metering is enabled.
    pub(crate) fn consume_fuel_enabled(&self) -> bool {
        self.consume_fuel
    }

    /// Enables epoch-based interruption. Off by default.
    pub fn epoch_interruption(&mut self, enable: bool) -> &mut Self {
        self.epoch_interruption = enable;
        self
    }

    /// Whether epoch-based interruption is enabled.
    pub(crate) fn epoch_interruption_enabled(&self) -> bool {
        self.epoch_interruption
    }

    /// Sets the maximum wasm operand-stack size, in bytes.
    pub fn max_wasm_stack(&mut self, size: usize) -> &mut Self {
        self.max_wasm_stack = Some(size);
        self
    }

    /// The configured max wasm stack size in bytes, if set.
    pub(crate) fn max_wasm_stack_bytes(&self) -> Option<usize> {
        self.max_wasm_stack
    }

    /// Sets the default maximum module binary size, in **bytes**, that [`Module::new`] will
    /// compile on this engine — the **untrusted-tier** validation-time ceiling that bounds
    /// compiler memory against a hostile module before it ever executes (#32). Trusted/curated
    /// packages can raise it per-module via [`Module::new_with_limits`].
    ///
    /// **Additive deviation from wasmtime** — there is no analog in `wasmtime::Config`. The
    /// default is a finite ceiling (256 MiB, never unbounded), per the multi-tenant threat model.
    ///
    /// [`Module::new`]: crate::Module::new
    /// [`Module::new_with_limits`]: crate::Module::new_with_limits
    pub fn max_module_bytes(&mut self, bytes: usize) -> &mut Self {
        self.max_module_bytes = bytes;
        self
    }

    /// The configured default module-size ceiling in bytes (`Config::max_module_bytes`).
    pub(crate) fn max_module_bytes_value(&self) -> usize {
        self.max_module_bytes
    }

    pub fn wasm_multi_value(&mut self, enable: bool) -> &mut Self {
        self
    }

    pub fn wasm_tail_call(&mut self, enable: bool) -> &mut Self {
        self
    }

    pub fn wasm_bulk_memory(&mut self, enable: bool) -> &mut Self {
        self
    }

    pub fn wasm_reference_types(&mut self, enable: bool) -> &mut Self {
        self
    }

    pub fn wasm_function_references(&mut self, enable: bool) -> &mut Self {
        self
    }

    pub fn wasm_gc(&mut self, enable: bool) -> &mut Self {
        self
    }

    pub fn wasm_exceptions(&mut self, enable: bool) -> &mut Self {
        self
    }

    pub fn memory_reservation(&mut self, bytes: u64) -> &mut Self {
        self
    }

    pub fn memory_reservation_for_growth(&mut self, bytes: u64) -> &mut Self {
        self
    }

    pub fn memory_may_move(&mut self, enable: bool) -> &mut Self {
        self
    }

    pub fn memory_init_cow(&mut self, enable: bool) -> &mut Self {
        self
    }

    pub fn memory_guard_size(&mut self, bytes: u64) -> &mut Self {
        self
    }

    /// The GC heap's **pre-authorized reservation** (bytes): the byte budget a store may grow its
    /// GC heap to **without consulting the `ResourceLimiter`** (the embedder has authorized it up
    /// front), and the cap on a single reservation-growth step. Growth beyond it is limiter-gated.
    /// Defaults to `0` (every grow consults the limiter). Unlike wasmtime this reserves a *budget*,
    /// not address space (we hold no mmap'd region).
    pub fn gc_heap_reservation(&mut self, bytes: u64) -> &mut Self {
        self.gc_heap_reservation = bytes;
        self
    }

    /// The configured GC-heap reservation in bytes (saturated to `usize`).
    pub(crate) fn gc_heap_reservation_bytes(&self) -> usize {
        usize::try_from(self.gc_heap_reservation).unwrap_or(usize::MAX)
    }

    pub fn gc_heap_guard_size(&mut self, bytes: u64) -> &mut Self {
        self
    }

    pub fn gc_heap_reservation_for_growth(&mut self, bytes: u64) -> &mut Self {
        self
    }

    pub fn gc_heap_may_move(&mut self, enable: bool) -> &mut Self {
        self
    }

    /// Accepted for wasmtime parity; this interpreter has no Cranelift backend so the
    /// optimization level has no effect (compilation is a single linear pre-decode pass).
    pub fn cranelift_opt_level(&mut self, level: OptLevel) -> &mut Self {
        self
    }

    /// Whether to capture a wasm backtrace on traps/exceptions. On by default. Also gates the
    /// cheap per-`Op` offset table + `name`-section retention used to symbolicate frames.
    pub fn wasm_backtrace(&mut self, enable: bool) -> &mut Self {
        self.wasm_backtrace = enable;
        self
    }

    /// Whether wasm backtraces carry DWARF file/line detail. Defaults to
    /// [`WasmBacktraceDetails::Environment`].
    pub fn wasm_backtrace_details(&mut self, enable: WasmBacktraceDetails) -> &mut Self {
        self.wasm_backtrace_details = enable;
        self
    }

    /// Whether to retain the module's DWARF debug info. Off by default. The native-debugger aspect
    /// is a no-op for an interpreter, but the retained DWARF symbolicates backtraces (ARCHITECTURE
    /// §16), so enabling this gives source-level frames regardless of `wasm_backtrace_details`.
    pub fn debug_info(&mut self, enable: bool) -> &mut Self {
        self.debug_info = enable;
        self
    }

    /// Whether backtrace capture is enabled (`Config::wasm_backtrace`).
    pub(crate) fn wasm_backtrace_enabled(&self) -> bool {
        self.wasm_backtrace
    }

    /// Whether DWARF debug info is retained (`Config::debug_info`).
    pub(crate) fn debug_info_enabled(&self) -> bool {
        self.debug_info
    }

    /// Whether backtraces should resolve DWARF file/line, resolving `Environment` against
    /// `WASMTIME_BACKTRACE_DETAILS` (`"1"` enables).
    pub(crate) fn wasm_backtrace_details_enabled(&self) -> bool {
        match self.wasm_backtrace_details {
            WasmBacktraceDetails::Enable => true,
            WasmBacktraceDetails::Disable => false,
            WasmBacktraceDetails::Environment => {
                std::env::var("WASMTIME_BACKTRACE_DETAILS").is_ok_and(|v| v == "1")
            }
        }
    }

    /// Engine-wide GC-pressure high-water mark, in bytes.
    ///
    /// **Additive deviation from wasmtime** — there is no analog in `wasmtime::Config`.
    /// When total committed GC bytes across all stores of the engine cross this value,
    /// the engine requests collection from its stores (checked at the fuel/epoch
    /// back-edge safe point). Defaults to ~80% of detected physical RAM if unset.
    /// See `docs/ARCHITECTURE.md` §14.
    pub fn gc_memory_threshold(&mut self, bytes: usize) -> &mut Self {
        self.gc_memory_threshold = Some(bytes);
        self
    }

    pub fn collector(&mut self, collector: Collector) -> &mut Self {
        self.collector = collector;
        self
    }

    /// The selected garbage collector (resolved to the internal strategy by `Engine::new`).
    pub(crate) fn collector_kind(&self) -> Collector {
        self.collector
    }

    /// The configured engine-wide GC-pressure threshold in bytes, if set.
    pub(crate) fn gc_memory_threshold_bytes(&self) -> Option<usize> {
        self.gc_memory_threshold
    }

    /// Enables async execution (`Func::call_async`, async host fns, yields).
    /// Off by default. Once enabled, the sync entry points reject this store.
    #[cfg(feature = "async")]
    pub fn async_support(&mut self, enable: bool) -> &mut Self {
        self.async_support = enable;
        self
    }

    /// Whether async support is enabled (`Config::async_support`).
    pub(crate) fn async_support_enabled(&self) -> bool {
        self.async_support
    }

    /// Accepted for wasmtime API parity but a **no-op** for this interpreter:
    /// suspend/resume is just parking the `Execution` state machine (no native
    /// fiber stack to size — see ARCHITECTURE §2.4), so there is no async stack.
    #[cfg(feature = "async")]
    pub fn async_stack_size(&mut self, size: usize) -> &mut Self {
        self
    }
}

/// Garbage-collector selection, mostly mirroring `wasmtime::Collector`.
///
/// Our interpreter implements a single tracing strategy — non-moving stop-the-world
/// **mark-sweep**. `Auto` selects it; `Null` stays allocate-only (matching wasmtime). The
/// extra [`Collector::MarkSweep`] variant names that strategy explicitly (it has no wasmtime
/// analog — naming it keeps us a superset, so drop-in embedder code, which never references it,
/// still compiles). The two collectors we do **not** implement —
/// [`Collector::DeferredReferenceCounting`] and [`Collector::Copying`] — are **rejected** at
/// [`Engine::new`](crate::Engine::new), the same way wasmtime errors when a selected collector is
/// unavailable. See `docs/ARCHITECTURE.md` §14.
#[non_exhaustive]
#[derive(PartialEq, Eq, Clone, Copy, Debug, Default)]
pub enum Collector {
    /// Automatically select a collector — resolves to non-moving mark-sweep here.
    #[default]
    Auto,
    /// Deferred reference counting — **not implemented** (rejected at `Engine::new`).
    DeferredReferenceCounting,
    /// Allocate-only: never reclaims, traps on heap exhaustion.
    Null,
    /// Copying collector — **not implemented** (rejected at `Engine::new`).
    Copying,
    /// Non-moving stop-the-world mark-sweep (our own variant; no wasmtime analog).
    MarkSweep,
}

/// The internal collector strategy actually run, resolved from the public [`Collector`] at
/// `Engine::new`. Two-way so the heap/run loop switch on it without re-deriving from the
/// (`#[non_exhaustive]`, partly-rejected) public enum.
#[derive(PartialEq, Eq, Clone, Copy, Debug)]
pub(crate) enum CollectorKind {
    /// Allocate-only; reclaims nothing (`Collector::Null`).
    Null,
    /// Non-moving stop-the-world mark-sweep (`Collector::Auto`/`MarkSweep`).
    MarkSweep,
}

impl Collector {
    /// Resolves the public selection to the internal strategy, **rejecting** the collectors we
    /// don't implement (wasmtime likewise errors at `Engine::new` for an unavailable collector).
    pub(crate) fn resolve(self) -> crate::Result<CollectorKind> {
        match self {
            Collector::Auto | Collector::MarkSweep => Ok(CollectorKind::MarkSweep),
            Collector::Null => Ok(CollectorKind::Null),
            Collector::DeferredReferenceCounting => Err(crate::Error::msg(
                "the deferred reference-counting collector is not supported \
                 (use Collector::Auto, Collector::MarkSweep, or Collector::Null)",
            )),
            Collector::Copying => Err(crate::Error::msg(
                "the copying collector is not supported \
                 (use Collector::Auto, Collector::MarkSweep, or Collector::Null)",
            )),
        }
    }
}

/// Cranelift optimization level, mirroring `wasmtime::OptLevel`. Accepted for API
/// parity only — this interpreter has no optimizing backend, so all variants behave
/// identically (see [`Config::cranelift_opt_level`]).
#[non_exhaustive]
#[derive(PartialEq, Eq, Clone, Copy, Debug, Default)]
pub enum OptLevel {
    #[default]
    None,
    Speed,
    SpeedAndSize,
}

/// Whether captured backtraces carry DWARF file/line detail, mirroring
/// `wasmtime::WasmBacktraceDetails`. `Environment` (the default) reads the
/// `WASMTIME_BACKTRACE_DETAILS` env var (`"1"` enables).
#[non_exhaustive]
#[derive(PartialEq, Eq, Clone, Copy, Debug, Default)]
pub enum WasmBacktraceDetails {
    Enable,
    Disable,
    #[default]
    Environment,
}

#[cfg(test)]
mod tests {
    use super::{Config, WasmBacktraceDetails};

    #[test]
    fn backtrace_knob_defaults() {
        let c = Config::new();
        assert!(c.wasm_backtrace_enabled(), "backtrace on by default");
        assert!(!c.debug_info_enabled(), "debug_info off by default");
    }

    #[test]
    fn details_enable_disable_resolve_without_env() {
        assert!(Config::new()
            .wasm_backtrace_details(WasmBacktraceDetails::Enable)
            .wasm_backtrace_details_enabled());
        assert!(!Config::new()
            .wasm_backtrace_details(WasmBacktraceDetails::Disable)
            .wasm_backtrace_details_enabled());
    }

    #[test]
    fn knobs_round_trip() {
        let mut c = Config::new();
        c.wasm_backtrace(false).debug_info(true);
        assert!(!c.wasm_backtrace_enabled());
        assert!(c.debug_info_enabled());
    }
}