structured-zstd 0.2.5

//! The [StreamingDecoder] wraps a [FrameDecoder] and provides a Read impl that decodes data when necessary

use core::borrow::BorrowMut;

use crate::common::MAX_BLOCK_SIZE;
use crate::decoding::errors::{FrameDecoderError, ReadFrameHeaderError};
use crate::decoding::{BlockDecodingStrategy, DictionaryHandle, FrameDecoder};
use crate::io::{Error, ErrorKind, Read};

/// High level Zstandard frame decoder that can be used to decompress a given Zstandard frame.
///
/// This decoder implements `io::Read`, so you can interact with it by calling
/// `io::Read::read_to_end` / `io::Read::read_exact` or passing this to another library / module as a source for the decoded content
///
/// If you need more control over how decompression takes place, you can use
/// the lower level [FrameDecoder], which allows for greater control over how
/// decompression takes place but the implementor must call
/// [FrameDecoder::decode_blocks] repeatedly to decode the entire frame.
///
/// ## Multiple frames
/// A stream is one or more frames (RFC 8878 3). Every read path, plain `read`
/// and `io::copy` over it included, decodes them in turn, skips skippable
/// frames wherever they stand, and applies the constructor's dictionary to
/// each frame. The source ending at a frame boundary ends the stream; bytes
/// that do not form a frame are an error. `read` hands back a finished frame's
/// bytes before it reads the next frame's header, so a source that stays open
/// is not waited on while output is pending.
///
/// To decode a single frame and leave the bytes after it unread, drive a
/// [FrameDecoder] directly.
///
/// ## When the source is read
/// Construction reads nothing; the first frame's header is read by the first
/// `read` or `read_to_end`, and a source that is not a zstd stream fails
/// there, as upstream's `ZSTD_DStream` reads nothing until it is fed. So
/// [`into_inner`](Self::into_inner) hands back an untouched source when the
/// decoder was never read, and the source is not lost when its first frame
/// turns out to be damaged.
///
/// ```no_run
/// // `File` is std-only; `read_to_end` itself is available under no_std too.
/// #[cfg(feature = "std")]
/// {
///     use std::fs::File;
///     use std::io::Read;
///     use structured_zstd::decoding::StreamingDecoder;
///
///     // Read a Zstandard archive from the filesystem then decompress it into a vec.
///     let mut f: File = todo!("Read a .zstd archive from somewhere");
///     let mut decoder = StreamingDecoder::new(f);
///     let mut result = Vec::new();
///     Read::read_to_end(&mut decoder, &mut result).unwrap();
/// }
/// ```
pub struct StreamingDecoder<READ: Read, DEC: BorrowMut<FrameDecoder>> {
    pub decoder: DEC,
    source: READ,
    /// Whether the decoder was constructed with a dictionary it applies to
    /// every frame, the first included (a plain init resolves dictionaries by
    /// frame id only and would lose it for frames omitting the id); the
    /// decoder already holds its handle, so this one keeps none of its own.
    forced_dictionary: bool,
    /// Where the stream stands between frames.
    position: Position,
    /// Source bytes read ahead and not yet decoded.
    input: Input,
}

/// The sizes of one frame a [`StreamingDecoder`] decoded, as
/// [`StreamingDecoder::read_reporting_frames`] reports it: what the frame took
/// from the source and what it decoded to, as upstream's
/// `ZSTD_trace_decompress_end` reports them.
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
pub struct FinishedFrame {
    /// Bytes of the frame read from the source, header and checksum included.
    pub compressed_size: u64,
    /// Bytes the frame decoded to.
    pub decompressed_size: u64,
}

/// A dictionary a [`StreamingDecoder`] constructor refused, with what the
/// constructor took by value handed back: the source, unread, since the
/// dictionary is checked before anything is read, and the decoder where the
/// caller passed one (`()` where the constructor makes its own).
///
/// `Debug` and `Display` show the decoder's error as it is, so an `unwrap`
/// or a message reads the same as for a [`FrameDecoderError`].
///
/// # Examples
/// ```
/// use structured_zstd::decoding::StreamingDecoder;
///
/// let archive_entry: &[u8] = b"\x28\xb5\x2f\xfd...";
/// // The dictionary magic with nothing after it.
/// let blob = 0xEC30_A437u32.to_le_bytes();
/// let refused = StreamingDecoder::new_with_dictionary_bytes(archive_entry, &blob)
///     .err()
///     .expect("a truncated dictionary is refused");
/// eprintln!("dictionary refused: {refused}");
/// // The entry is still the caller's, as it was handed over.
/// assert_eq!(refused.into_source(), archive_entry);
/// ```
pub struct DictionaryRefused<READ, DEC = ()> {
    source: READ,
    decoder: DEC,
    error: FrameDecoderError,
}

impl<READ, DEC> DictionaryRefused<READ, DEC> {
    /// Why the dictionary was refused.
    pub fn error(&self) -> &FrameDecoderError {
        &self.error
    }

    /// The source, as the constructor was given it.
    pub fn into_source(self) -> READ {
        self.source
    }

    /// The source, the decoder and the error.
    pub fn into_parts(self) -> (READ, DEC, FrameDecoderError) {
        (self.source, self.decoder, self.error)
    }
}

impl<READ, DEC> core::fmt::Debug for DictionaryRefused<READ, DEC> {
    fn fmt(&self, f: &mut core::fmt::Formatter<'_>) -> core::fmt::Result {
        core::fmt::Debug::fmt(&self.error, f)
    }
}

impl<READ, DEC> core::fmt::Display for DictionaryRefused<READ, DEC> {
    fn fmt(&self, f: &mut core::fmt::Formatter<'_>) -> core::fmt::Result {
        core::fmt::Display::fmt(&self.error, f)
    }
}

#[cfg(feature = "std")]
impl<READ, DEC> std::error::Error for DictionaryRefused<READ, DEC> {
    fn source(&self) -> Option<&(dyn std::error::Error + 'static)> {
        std::error::Error::source(&self.error)
    }
}

/// Where a [`StreamingDecoder`] stands in its stream.
#[derive(Clone, Copy, PartialEq, Eq)]
enum Position {
    /// Nothing read yet: the next step is the first frame's header, and the
    /// source ending here is an error, as an empty stream holds no frame.
    BeforeFirstFrame,
    /// A frame or skippable frame has ended: the next step is the next
    /// frame's header, and the source ending here is the end of the stream.
    BetweenFrames,
    /// Inside a frame whose header has been read.
    InFrame,
    /// The source has ended at a frame boundary: every read from here on is
    /// the end of the stream, without asking the source again.
    End,
}

/// The most of a skippable frame's content read in one step.
const SKIP_CHUNK: u32 = 8 * 1024;

/// Source bytes of the decoder's next step, gathered the way upstream zstd's
/// `ZSTD_decompressStream` loads `nextSrcSizeToDecompress` bytes: exactly the
/// next frame header, block or checksum, and nothing past it. A step is decoded
/// only once it is all in hand, so a non-blocking source that returns
/// `WouldBlock` part-way through loses nothing, and the source never stands
/// beyond what the decoder has taken. A Raw block's content is the exception:
/// it is read straight into the decoder's buffer, see [`RawBlock`].
struct Input {
    /// Grown to the largest step seen; holds the pending bytes at
    /// `start..end`.
    buf: alloc::vec::Vec<u8>,
    start: usize,
    end: usize,
    /// Content of a skippable frame still to step over.
    skip_left: u32,
    /// The Raw block whose content is being read.
    raw: Option<RawBlock>,
}

/// A Raw block in progress. Its content is the output itself, so it is not
/// gathered whole: each read lands in a [`RAW_CHUNK`] of the input buffer,
/// still in cache, and goes on to the decode buffer at once.
struct RawBlock {
    size: u32,
    left: u32,
    last: bool,
    /// The running digest of the block, when per-block checksums are asked
    /// for: its content may be handed on before the block ends, so it cannot
    /// be hashed from the decode buffer at the end as other blocks are.
    #[cfg(all(feature = "lsm", feature = "hash"))]
    digest: Option<twox_hash::XxHash64>,
}

/// The most of a Raw block read in one step. Every byte of the input buffer
/// is initialised once, when it first grows, so a source that hands content
/// over in small pieces costs a copy of each piece and nothing more.
const RAW_CHUNK: usize = 32 * 1024;

impl Input {
    const fn new() -> Self {
        Self {
            buf: alloc::vec::Vec::new(),
            start: 0,
            end: 0,
            skip_left: 0,
            raw: None,
        }
    }

    fn pending(&self) -> &[u8] {
        &self.buf[self.start..self.end]
    }

    /// Read the rest of `source` behind the pending bytes. What it reads stays
    /// pending whatever it returns, so a source that stops part-way through
    /// is retried from where it stopped, with nothing lost.
    fn read_rest<R: Read>(&mut self, source: &mut R) -> Result<(), Error> {
        if self.start > 0 {
            self.buf.copy_within(self.start..self.end, 0);
            self.end -= self.start;
            self.start = 0;
        }
        self.buf.truncate(self.end);
        // Both `read_to_end`s keep what they appended when they fail.
        let result = source.read_to_end(&mut self.buf);
        self.end = self.buf.len();
        result.map(drop)
    }

    /// Read the next part of a Raw block, at most `left` bytes and at most
    /// [`RAW_CHUNK`], into the start of the buffer and return how many. Only
    /// called while nothing is pending. `Ok(0)` is the source's end;
    /// `Interrupted` is retried.
    fn read_raw<R: Read>(&mut self, source: &mut R, left: u32) -> Result<usize, Error> {
        debug_assert!(
            self.pending().is_empty(),
            "a Raw block is read with nothing pending"
        );
        // `RAW_CHUNK` fits a `u32`, so the minimum is taken in the wire's width.
        let chunk = left.min(RAW_CHUNK as u32) as usize;
        if self.buf.len() < chunk {
            self.buf.resize(chunk, 0);
        }
        loop {
            match source.read(&mut self.buf[..chunk]) {
                Err(e) if e.kind() == ErrorKind::Interrupted => {}
                other => return other,
            }
        }
    }

    /// Drop the input, buffer and all: after `read_rest` it holds a whole
    /// stream, which a decoder kept alive must not pin.
    fn release(&mut self) {
        self.buf = alloc::vec::Vec::new();
        self.start = 0;
        self.end = 0;
    }

    fn consume(&mut self, n: usize) {
        debug_assert!(n <= self.end - self.start);
        self.start += n;
        if self.start == self.end {
            self.start = 0;
            self.end = 0;
        }
    }

    /// Read more of `source` behind the pending bytes, up to `want` pending in
    /// all and no further. `Ok(0)` is its end; its errors come back as it
    /// reported them, `Interrupted` retried.
    fn fill<R: Read>(&mut self, source: &mut R, want: usize) -> Result<usize, Error> {
        // Pending bytes are an unfinished step, which reads stop at, so they
        // are rarely moved; when they are, they are less than one step.
        if self.start > 0 {
            self.buf.copy_within(self.start..self.end, 0);
            self.end -= self.start;
            self.start = 0;
        }
        debug_assert!(self.end < want, "a fill must ask for more than is pending");
        if self.buf.len() < want {
            // Doubling keeps a stream of growing blocks to a few allocations.
            let len = want.max(2 * self.buf.len());
            self.buf.resize(len, 0);
        }
        loop {
            match source.read(&mut self.buf[self.end..want]) {
                Ok(n) => {
                    self.end += n;
                    return Ok(n);
                }
                Err(e) if e.kind() == ErrorKind::Interrupted => {}
                Err(e) => return Err(e),
            }
        }
    }
}

/// How much of a frame header `bytes` says there is to read: 4 for the magic,
/// 8 for a skippable frame's header, and for a frame its descriptor's fields.
/// A magic that is neither stops at 4, where the parser rejects it. A
/// magicless frame (`ZSTD_f_zstd1_magicless`) starts at its descriptor and
/// has no skippable form.
fn header_len(bytes: &[u8], magicless: bool) -> usize {
    let descriptor_at = if magicless {
        0
    } else {
        let Some(magic) = bytes.first_chunk::<4>() else {
            return 4;
        };
        let magic = u32::from_le_bytes(*magic);
        if magic & 0xFFFF_FFF0 == 0x184D_2A50 {
            return 8;
        }
        if magic != crate::common::MAGIC_NUM {
            // A v0.5-v0.7 header: its descriptor, then the fields it names.
            #[cfg(feature = "legacy")]
            if let Some(version) = crate::decoding::LegacyVersion::of(bytes) {
                return crate::decoding::legacy::header_len(version, bytes).unwrap_or(5);
            }
            return 4;
        }
        4
    };
    let Some(&descriptor) = bytes.get(descriptor_at) else {
        return descriptor_at + 1;
    };
    descriptor_at + crate::decoding::frame::FrameDescriptor(descriptor).header_len()
}

impl<READ: Read, DEC: BorrowMut<FrameDecoder>> StreamingDecoder<READ, DEC> {
    /// [`new`](StreamingDecoder::new) driving a caller-supplied
    /// [`FrameDecoder`], so its buffers and settings (magicless format,
    /// registered dictionaries, checksum mode) carry over from stream to
    /// stream. Nothing is read from `source` until the first read.
    ///
    /// # Examples
    /// ```
    /// use std::io::Read;
    /// use structured_zstd::decoding::{FrameDecoder, StreamingDecoder};
    /// use structured_zstd::encoding::{CompressionLevel, compress_to_vec};
    ///
    /// let frame = compress_to_vec(&b"reused decoder"[..], CompressionLevel::Fastest);
    /// let mut decoder = FrameDecoder::new();
    /// for _ in 0..2 {
    ///     let mut stream = StreamingDecoder::new_with_decoder(&frame[..], &mut decoder);
    ///     let mut decoded = Vec::new();
    ///     stream.read_to_end(&mut decoded).unwrap();
    ///     assert_eq!(decoded, b"reused decoder");
    /// }
    /// ```
    pub fn new_with_decoder(source: READ, decoder: DEC) -> StreamingDecoder<READ, DEC> {
        StreamingDecoder {
            decoder,
            source,
            forced_dictionary: false,
            position: Position::BeforeFirstFrame,
            input: Input::new(),
        }
    }

    /// [`new_with_decoder`](Self::new_with_decoder) with `dict` applied to
    /// every frame even when its header omits the dictionary ID, as
    /// [`new_with_dictionary_handle`](StreamingDecoder::new_with_dictionary_handle)
    /// applies it (same warning). A decoder reused frame after frame keeps its
    /// buffers and, for the same dictionary, the handle it already holds, so
    /// after the first frame it allocates nothing and touches no reference
    /// count.
    ///
    /// # Errors
    ///
    /// Only for a dictionary whose content no frame can use, as a
    /// [`DictionaryRefused`] that hands back `source`, unread, and `decoder`
    /// as they were given. Nothing is read from `source` until the first
    /// read, which reports a frame that does not match the dictionary.
    ///
    /// # Examples
    /// ```
    /// use std::io::Read;
    /// use structured_zstd::decoding::{Dictionary, DictionaryHandle, FrameDecoder, StreamingDecoder};
    /// use structured_zstd::encoding::{FrameCompressor, CompressionLevel};
    ///
    /// let content = b"a dictionary of words the frames reuse".to_vec();
    /// let dictionary = DictionaryHandle::from_dictionary(
    ///     Dictionary::from_raw_content(1, content.clone()).unwrap(),
    /// );
    /// let mut compressor: FrameCompressor = FrameCompressor::new(CompressionLevel::Default);
    /// compressor.set_dictionary(Dictionary::from_raw_content(1, content).unwrap()).unwrap();
    /// let frame = compressor.compress_independent_frame(b"the frames reuse words");
    ///
    /// let mut decoder = FrameDecoder::new();
    /// for _ in 0..2 {
    ///     let mut stream =
    ///         StreamingDecoder::new_with_decoder_and_dictionary_handle(&frame[..], &mut decoder, &dictionary)
    ///             .unwrap();
    ///     let mut decoded = Vec::new();
    ///     stream.read_to_end(&mut decoded).unwrap();
    ///     assert_eq!(decoded, b"the frames reuse words");
    /// }
    ///
    /// // A dictionary no frame can use is refused, and the decoder and the
    /// // frame come back to be used another way.
    /// let mut unusable = Dictionary::from_raw_content(1, b"content".to_vec()).unwrap();
    /// unusable.offset_hist[0] = 0;
    /// let unusable = DictionaryHandle::from_dictionary(unusable);
    /// let (source, decoder, _error) =
    ///     StreamingDecoder::new_with_decoder_and_dictionary_handle(&frame[..], decoder, &unusable)
    ///         .err()
    ///         .expect("a zero repeat offset is refused")
    ///         .into_parts();
    /// assert_eq!(source, &frame[..]);
    /// # let _: FrameDecoder = decoder;
    /// ```
    pub fn new_with_decoder_and_dictionary_handle(
        source: READ,
        mut decoder: DEC,
        dict: &DictionaryHandle,
    ) -> Result<StreamingDecoder<READ, DEC>, DictionaryRefused<READ, DEC>> {
        // A refused dictionary leaves the decoder as it was.
        if let Err(error) = decoder.borrow_mut().arm_dict(dict) {
            return Err(DictionaryRefused {
                source,
                decoder,
                error,
            });
        }
        Ok(StreamingDecoder {
            decoder,
            source,
            forced_dictionary: true,
            position: Position::BeforeFirstFrame,
            input: Input::new(),
        })
    }
}

impl<READ: Read> StreamingDecoder<READ, FrameDecoder> {
    /// Create a streaming decoder over `source`.
    ///
    /// Nothing is read from `source` here: the first frame's header is read by
    /// the first `read` or `read_to_end`, which is where a source that is not
    /// a zstd stream, or is empty, reports its error. Until then
    /// [`into_inner`](Self::into_inner) hands `source` back untouched, and
    /// after such an error it hands back whatever the source holds past the
    /// bytes the decoder took.
    ///
    /// # Examples
    /// ```
    /// use std::io::Read;
    /// use structured_zstd::decoding::StreamingDecoder;
    ///
    /// let mut decoder = StreamingDecoder::new(&b"not a zstd frame"[..]);
    /// let mut out = Vec::new();
    /// assert!(decoder.read_to_end(&mut out).is_err());
    /// ```
    pub fn new(source: READ) -> StreamingDecoder<READ, FrameDecoder> {
        StreamingDecoder::new_with_decoder(source, FrameDecoder::new())
    }

    /// Create a streaming decoder using a pre-parsed dictionary handle.
    ///
    /// Nothing is read from `source` here, as with [`new`](Self::new).
    ///
    /// # Errors
    ///
    /// Only for a dictionary whose content no frame can use, as a
    /// [`DictionaryRefused`] that hands `source` back unread.
    ///
    /// # Warning
    ///
    /// This constructor initializes the underlying [`FrameDecoder`] with
    /// `dict`, even if a frame header omits the optional dictionary ID.
    /// Callers must only use it when they already know the stream was encoded
    /// with this dictionary; otherwise decoded output can be silently
    /// corrupted.
    pub fn new_with_dictionary_handle(
        source: READ,
        dict: &DictionaryHandle,
    ) -> Result<StreamingDecoder<READ, FrameDecoder>, DictionaryRefused<READ>> {
        Self::new_with_decoder_and_dictionary_handle(source, FrameDecoder::new(), dict).map_err(
            // The decoder was made here, so only the source goes back.
            |refused| DictionaryRefused {
                source: refused.source,
                decoder: (),
                error: refused.error,
            },
        )
    }

    /// Create a streaming decoder using a serialized dictionary blob.
    ///
    /// # Errors
    ///
    /// A blob that is not a dictionary, or one no frame can use, as a
    /// [`DictionaryRefused`] that hands `source` back unread.
    ///
    /// # Warning
    ///
    /// This API forwards to [`StreamingDecoder::new_with_dictionary_handle`]
    /// and therefore applies the decoded dictionary to frames whose headers may
    /// omit the optional dictionary ID. Only use it when the stream is known to
    /// be encoded with that dictionary.
    pub fn new_with_dictionary_bytes(
        source: READ,
        raw_dictionary: &[u8],
    ) -> Result<StreamingDecoder<READ, FrameDecoder>, DictionaryRefused<READ>> {
        match DictionaryHandle::decode_dict(raw_dictionary) {
            Ok(dict) => Self::new_with_dictionary_handle(source, &dict),
            Err(error) => Err(DictionaryRefused {
                source,
                decoder: (),
                error: FrameDecoderError::from(error),
            }),
        }
    }
}

impl<READ: Read, DEC: BorrowMut<FrameDecoder>> StreamingDecoder<READ, DEC> {
    /// Gets a reference to the underlying reader.
    pub fn get_ref(&self) -> &READ {
        &self.source
    }

    /// Gets a mutable reference to the underlying reader.
    ///
    /// It is inadvisable to directly read from the underlying reader.
    pub fn get_mut(&mut self) -> &mut READ {
        &mut self.source
    }

    /// Gets a mutable reference to the frame decoder driving this stream.
    ///
    /// Exposed for settings that are read as decoding proceeds rather than at
    /// construction — [`FrameDecoder::set_content_checksum`] above all, which a
    /// caller that wants mismatches to fail (rather than merely be computed)
    /// has to reach after the constructor has chosen the decoder, including
    /// on the dictionary paths.
    pub fn decoder_mut(&mut self) -> &mut FrameDecoder {
        self.decoder.borrow_mut()
    }

    /// Destructures this object into the inner reader.
    ///
    /// This reads nothing. A decoder that was never read hands the reader back
    /// untouched. The decoder reads only what its next step needs, so once a
    /// frame's content has been delivered the reader stands right after that
    /// frame. Bytes of a step a `WouldBlock` left unfinished stay with the
    /// decoder.
    ///
    /// # Examples
    /// ```
    /// use structured_zstd::decoding::StreamingDecoder;
    ///
    /// let data = b"\x28\xb5\x2f\xfd and whatever follows";
    /// let decoder = StreamingDecoder::new(&data[..]);
    /// assert_eq!(decoder.into_inner(), &data[..]);
    /// ```
    pub fn into_inner(self) -> READ
    where
        READ: Sized,
    {
        self.source
    }

    /// Destructures this object into both the inner reader and [FrameDecoder].
    pub fn into_parts(self) -> (READ, DEC)
    where
        READ: Sized,
    {
        (self.source, self.decoder)
    }

    /// Destructures this object into the inner [FrameDecoder].
    pub fn into_frame_decoder(self) -> DEC {
        self.decoder
    }

    /// The error for a source that ended inside a frame. Cut inside the
    /// trailing checksum, that is what it reports; cut inside a block, the
    /// leftover input goes to the block decoder, which reports how it was cut
    /// short as it does for any truncated frame. Whole input never reaches
    /// here (it would have decoded), so that decode fails; were it to pass,
    /// the cut is still reported, as an early end of input.
    fn cut_short(&mut self) -> Error {
        let decoder = self.decoder.borrow_mut();
        if decoder.awaits_checksum() {
            return frame_error(FrameDecoderError::FailedToReadChecksum(Error::from(
                ErrorKind::UnexpectedEof,
            )));
        }
        let mut rest = self.input.pending();
        decoder
            .decode_blocks(&mut rest, BlockDecodingStrategy::All)
            .map_or_else(frame_error, |_| Error::from(ErrorKind::UnexpectedEof))
    }

    /// Start the next frame of the stream, the first included, skipping
    /// skippable frames, with the constructor's dictionary if it had one.
    /// `false` when the source ends cleanly at a frame boundary, which the
    /// start of the stream is not; anything else that is not a frame is an
    /// error.
    ///
    /// The source's own errors go back as it reported them, so a non-blocking
    /// source's `WouldBlock` stays one; what the boundary had read stays in
    /// [`Input`], and the header is parsed only once it is whole, so a retry
    /// resumes where the source stopped.
    fn start_frame(&mut self) -> Result<bool, Error> {
        let how = if self.forced_dictionary {
            FrameStart::HeldDictionary
        } else {
            FrameStart::Plain
        };
        let magicless = self.decoder.borrow_mut().is_magicless();
        loop {
            while self.input.skip_left > 0 {
                // Counted in the wire's `u32`; a step is at most `SKIP_CHUNK`,
                // which every `usize` holds.
                let step = self.input.skip_left.min(SKIP_CHUNK);
                if self.input.pending().is_empty()
                    && self.input.fill(&mut self.source, step as usize)? == 0
                {
                    return Err(frame_error(FrameDecoderError::FailedToSkipFrame));
                }
                // Reads stop at `step`, so what is pending is skippable content;
                // the minimum is taken in `u32`, the wire's width.
                let pending = u32::try_from(self.input.pending().len()).unwrap_or(u32::MAX);
                let take = self.input.skip_left.min(pending);
                self.input.consume(take as usize);
                self.input.skip_left -= take;
            }
            loop {
                let have = self.input.pending().len();
                let want = header_len(self.input.pending(), magicless);
                if have >= want {
                    break;
                }
                if self.input.fill(&mut self.source, want)? == 0 {
                    if have == 0 {
                        if self.position == Position::BeforeFirstFrame {
                            return Err(no_frame_error());
                        }
                        return Ok(false);
                    }
                    // The source ended inside a header: let the parser report
                    // it as it reports any header cut short.
                    break;
                }
            }
            let mut header = self.input.pending();
            let before = header.len();
            let started = how.start(self.decoder.borrow_mut(), &mut header);
            let used = before - header.len();
            self.input.consume(used);
            match started {
                Ok(()) => {
                    self.position = Position::InFrame;
                    return Ok(true);
                }
                Err(e) => match skippable_frame_length(&e) {
                    Some(length) => {
                        // A stream of skippable frames alone is a stream that
                        // holds no content, not an empty one.
                        self.position = Position::BetweenFrames;
                        self.input.skip_left = length;
                    }
                    None => return Err(frame_error(e)),
                },
            }
        }
    }
}

/// The length of the skippable frame (RFC 8878 3.1.2) whose header `e`
/// reports, if it is one.
fn skippable_frame_length(e: &FrameDecoderError) -> Option<u32> {
    match e {
        FrameDecoderError::ReadFrameHeaderError(ReadFrameHeaderError::SkipFrame {
            length, ..
        }) => Some(*length),
        _ => None,
    }
}

/// How a frame's decoder is initialised.
enum FrameStart {
    /// Dictionaries resolved by the frame's dictionary id.
    Plain,
    /// The dictionary the decoder holds, applied whatever the frame header
    /// names.
    HeldDictionary,
}

impl FrameStart {
    fn start(
        &self,
        decoder: &mut FrameDecoder,
        source: impl Read,
    ) -> Result<(), FrameDecoderError> {
        match self {
            Self::Plain => decoder.init(source),
            Self::HeldDictionary => decoder.reset_with_active_dict(source),
        }
    }
}

/// Close a Raw block whose content is all in the decode buffer, recording its
/// digest when per-block checksums are on.
fn finish_raw_block(decoder: &mut FrameDecoder, raw: RawBlock) {
    #[cfg(all(feature = "lsm", feature = "hash"))]
    if let Some(digest) = raw.digest {
        decoder.record_block_checksum(core::hash::Hasher::finish(&digest) as u32);
    }
    decoder.finish_raw_block(raw.size, raw.last);
}

/// A frame decode error as the `Read` error it surfaces through.
fn frame_error(e: FrameDecoderError) -> Error {
    #[cfg(feature = "std")]
    return Error::other(e);
    #[cfg(not(feature = "std"))]
    return Error::new(ErrorKind::Other, alloc::boxed::Box::new(e));
}

/// The error for a source that ends before its first frame begins: there is no
/// magic number to read, as there is for any frame header cut short there.
fn no_frame_error() -> Error {
    frame_error(FrameDecoderError::ReadFrameHeaderError(
        ReadFrameHeaderError::MagicNumberReadError(Error::from(ErrorKind::UnexpectedEof)),
    ))
}

/// The checks a frame can only pass once it is fully decoded and drained: the
/// declared content size, then the content checksum in `Verify` mode.
fn verify_finished_frame(decoder: &FrameDecoder) -> Result<(), Error> {
    decoder.verify_content_size().map_err(frame_error)?;
    #[cfg(feature = "hash")]
    decoder.verify_content_checksum().map_err(frame_error)?;
    Ok(())
}

impl<READ: Read, DEC: BorrowMut<FrameDecoder>> StreamingDecoder<READ, DEC> {
    /// [`read`](Read::read), handing `finished` each frame the call finishes,
    /// at the moment it is verified and before the next frame is started, as
    /// upstream's `ZSTD_trace_decompress_end` hook is called. One call can
    /// finish several frames (empty frames deliver nothing, so it passes on
    /// to the next), and each is reported in stream order; skippable frames
    /// are not. `read_to_end` reports none.
    ///
    /// # Examples
    /// ```
    /// use structured_zstd::decoding::StreamingDecoder;
    /// use structured_zstd::encoding::{CompressionLevel, compress_to_vec};
    ///
    /// let frame = compress_to_vec(&b"one frame"[..], CompressionLevel::Fastest);
    /// let mut decoder = StreamingDecoder::new(&frame[..]);
    /// let mut buf = [0u8; 64];
    /// let mut finished = Vec::new();
    /// while decoder
    ///     .read_reporting_frames(&mut buf, |frame| finished.push(frame))
    ///     .unwrap()
    ///     > 0
    /// {}
    /// assert_eq!(finished.len(), 1);
    /// assert_eq!(finished[0].compressed_size, frame.len() as u64);
    /// assert_eq!(finished[0].decompressed_size, 9);
    /// ```
    pub fn read_reporting_frames(
        &mut self,
        buf: &mut [u8],
        mut finished: impl FnMut(FinishedFrame),
    ) -> Result<usize, Error> {
        if buf.is_empty() || self.position == Position::End {
            return Ok(0);
        }
        let mut written = 0;
        loop {
            if self.position != Position::InFrame {
                // A call reaches a frame boundary with nothing delivered: a
                // finished frame hands its last bytes back before it is left
                // (the check below), so the next frame's header is read only
                // by a call with nothing to deliver, an error never follows
                // delivered bytes (the `Read` contract), and a source that has
                // not sent the next frame yet is not waited on.
                debug_assert_eq!(written, 0, "a frame boundary is reached empty-handed");
                if !self.start_frame()? {
                    self.position = Position::End;
                    return Ok(0);
                }
                continue;
            }
            let decoder = self.decoder.borrow_mut();
            if decoder.is_finished() && decoder.can_collect() == 0 {
                // Bytes in hand go back first: the frame's checks and the
                // next frame's header wait for a call with nothing to deliver.
                if written > 0 {
                    return Ok(written);
                }
                // Fully decoded and drained: the frame's length and running
                // digest are final, so a frame shorter or longer than it
                // declared, or with a bad checksum in `Verify` mode, fails here.
                verify_finished_frame(decoder)?;
                finished(FinishedFrame {
                    compressed_size: decoder.bytes_read_from_source(),
                    decompressed_size: decoder.decoded_size(),
                });
                self.position = Position::BetweenFrames;
                continue;
            }
            if written == buf.len() {
                // With the frame's output all handed over, its checksum is the
                // next step, and it is taken in this call so the source stands
                // past the frame, as upstream's stream decoder reads the
                // checksum once the last block is flushed. A source that cannot
                // give its four bytes now, or a step that fails, leaves it to
                // the next call, which reports what went wrong: an error may
                // not follow bytes this call delivers.
                if decoder.awaits_checksum() && decoder.can_collect() == 0 {
                    while self.input.pending().len() < 4 {
                        match self.input.fill(&mut self.source, 4) {
                            Ok(n) if n > 0 => {}
                            _ => break,
                        }
                    }
                    if self.input.pending().len() >= 4
                        && let Ok((consumed, _)) =
                            decoder.decode_available(&self.input.pending()[..4], &mut [], true)
                    {
                        self.input.consume(consumed);
                    }
                }
                return Ok(written);
            }
            // A Raw block in progress reads on into the decode buffer once
            // the output already there has been handed over.
            if self.input.raw.is_some() && decoder.can_collect() == 0 {
                // Return what this call has rather than wait on the source.
                if written > 0 {
                    return Ok(written);
                }
                // A ceiling lowered while the block was open refuses the rest
                // of it, as it refuses every other step of the frame.
                decoder.check_window_still_admitted().map_err(frame_error)?;
                // The block stays recorded until the read has delivered: a
                // `WouldBlock` returns here with the block still open.
                let left = self.input.raw.as_ref().map_or(0, |raw| raw.left);
                let n = self.input.read_raw(&mut self.source, left)?;
                let mut raw = self.input.raw.take().expect("checked just above");
                if n == 0 {
                    return Err(frame_error(decoder.raw_block_cut_short(raw.size, raw.last)));
                }
                let content = &self.input.buf[..n];
                decoder.raw_block_push(content);
                #[cfg(all(feature = "lsm", feature = "hash"))]
                if let Some(digest) = raw.digest.as_mut() {
                    core::hash::Hasher::write(digest, content);
                }
                // `n <= left`, so it fits the `u32` it is taken from.
                raw.left -= n as u32;
                if raw.left == 0 {
                    finish_raw_block(decoder, raw);
                } else {
                    self.input.raw = Some(raw);
                }
                continue;
            }
            // Otherwise the decoder is entered only with its next step whole,
            // or with output to hand over: entering it with part of a block
            // only parses the block header to find the block incomplete.
            let want = decoder.input_needed(self.input.pending());
            if self.input.raw.is_none()
                && want > self.input.pending().len()
                && decoder.can_collect() == 0
            {
                // Return what this call has rather than wait on the source.
                if written > 0 {
                    return Ok(written);
                }
                // A Raw block's header alone is in hand: its content goes
                // straight to the decode buffer from here on.
                if let Some(&header) = self.input.pending().first_chunk::<3>()
                    && self.input.pending().len() == 3
                    && let Some((size, last)) = decoder
                        .start_raw_block(&header, true)
                        .map_err(frame_error)?
                {
                    self.input.consume(3);
                    let raw = RawBlock {
                        size,
                        left: size,
                        last,
                        #[cfg(all(feature = "lsm", feature = "hash"))]
                        digest: decoder
                            .per_block_checksums_enabled()
                            .then(|| twox_hash::XxHash64::with_seed(0)),
                    };
                    if size == 0 {
                        finish_raw_block(decoder, raw);
                    } else {
                        self.input.raw = Some(raw);
                    }
                    continue;
                }
                if self.input.fill(&mut self.source, want)? == 0 {
                    return Err(self.cut_short());
                }
                continue;
            }
            // Decode the step, handing output to `buf` block by block: the
            // decode window stays one window plus one block, as upstream's
            // flush loop keeps it. The buffer takes the whole window at the
            // first block whatever the frame declares, as upstream sizes a
            // stream's buffer from the window.
            let (consumed, produced) = decoder
                .decode_available(self.input.pending(), &mut buf[written..], true)
                .map_err(frame_error)?;
            self.input.consume(consumed);
            written += produced;
            if consumed > 0 || produced > 0 {
                continue;
            }
            if written > 0 {
                return Ok(written);
            }
            // A step whose input is all here yet decodes nothing (a block over
            // the frame's maximum, say) is a damaged frame: report it.
            return Err(self.cut_short());
        }
    }
}

impl<READ: Read, DEC: BorrowMut<FrameDecoder>> Read for StreamingDecoder<READ, DEC> {
    /// Decode the stream into `buf`, frame after frame (RFC 8878 3: a stream
    /// is one or more frames), as upstream zstd's `ZSTD_decompressStream`
    /// does. Skippable frames are skipped; the source ending at a frame
    /// boundary is the end of the stream, anything else is an error.
    fn read(&mut self, buf: &mut [u8]) -> Result<usize, Error> {
        self.read_reporting_frames(buf, |_| {})
    }

    /// Decode-in-place fast path for whole-frame consumption. Instead of the
    /// generic `read` loop (decode block -> `RingBuffer` -> copy into the
    /// caller buffer), buffer the (compressed, hence small) source and decode
    /// STRAIGHT into `output`'s spare capacity via the single-copy direct path,
    /// pre-sized from the frame's declared content size. Only taken when the
    /// decoder is at a frame boundary (nothing partially decoded / undrained);
    /// otherwise it falls back to the generic grow-and-`read` loop so a caller
    /// that mixed `read` with `read_to_end` still gets correct output.
    ///
    /// Per the `Read::read_to_end` contract this consumes the source to EOF: if
    /// the stream holds several concatenated frames they are ALL decoded (and
    /// skippable frames skipped), as with `read`.
    #[cfg(feature = "std")]
    fn read_to_end(&mut self, output: &mut alloc::vec::Vec<u8>) -> Result<usize, Error> {
        let start_total = output.len();
        self.decode_rest_to_vec(output)?;
        Ok(output.len() - start_total)
    }

    /// no_std counterpart of the decode-in-place `read_to_end` above (the
    /// no_std `Read::read_to_end` returns `()` instead of the byte count).
    #[cfg(not(feature = "std"))]
    fn read_to_end(&mut self, output: &mut alloc::vec::Vec<u8>) -> Result<(), Error> {
        self.decode_rest_to_vec(output)
    }
}

impl<READ: Read, DEC: BorrowMut<FrameDecoder>> StreamingDecoder<READ, DEC> {
    /// Body of both `read_to_end`s: decode the rest of the stream, appending
    /// to `output`.
    fn decode_rest_to_vec(&mut self, output: &mut alloc::vec::Vec<u8>) -> Result<(), Error> {
        // A forced dictionary is the one the decoder already holds; every
        // frame is initialised with it in place, touching no reference count.
        let keep_dictionary = self.forced_dictionary;
        // The first header is read the bounded way, a step at a time, so a
        // source that is not a zstd stream is refused after a header's worth
        // of bytes instead of after the whole of it is gathered below.
        if self.position == Position::BeforeFirstFrame && !self.start_frame()? {
            self.position = Position::End;
        }
        match self.position {
            Position::End => return Ok(()),
            // A frame whose header is read, with nothing decoded yet; a first
            // Raw block part-read into the decode buffer is not that.
            Position::InFrame
                if self.input.raw.is_none() && {
                    let d = self.decoder.borrow_mut();
                    d.is_at_frame_start() && d.can_collect() == 0
                } =>
            {
                self.input.read_rest(&mut self.source)?;
                let decoded = self.decoder.borrow_mut().decode_current_frame_to_vec(
                    self.input.pending(),
                    output,
                    keep_dictionary,
                );
                self.input.release();
                decoded.map_err(frame_error)?;
                self.position = Position::End;
                return Ok(());
            }
            Position::BeforeFirstFrame | Position::InFrame | Position::BetweenFrames => {}
        }
        // Mid-frame fallback: drain through the generic path, which carries on
        // into the following frames, so the source is consumed to true EOF.
        loop {
            let start = output.len();
            output.resize(start + MAX_BLOCK_SIZE as usize, 0);
            // On error, drop the just-grown (zeroed) tail before propagating so
            // the caller never observes bytes that were never decoded.
            let n = match self.read(&mut output[start..]) {
                Ok(n) => n,
                Err(e) => {
                    output.truncate(start);
                    return Err(e);
                }
            };
            output.truncate(start + n);
            if n == 0 {
                return Ok(());
            }
        }
    }
}

#[cfg(test)]
mod tests;