stm32ral 0.8.0

#![allow(non_snake_case, non_upper_case_globals)]
#![allow(non_camel_case_types)]
//! General-purpose I/Os

use crate::{RORegister, RWRegister, WORegister};
#[cfg(not(feature = "nosync"))]
use core::marker::PhantomData;

/// GPIO port mode register
pub mod MODER {

    /// Port x configuration bits (y = 0..15)
    pub mod MODER15 {
        /// Offset (30 bits)
        pub const offset: u32 = 30;
        /// Mask (2 bits: 0b11 << 30)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod MODER14 {
        /// Offset (28 bits)
        pub const offset: u32 = 28;
        /// Mask (2 bits: 0b11 << 28)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod MODER13 {
        /// Offset (26 bits)
        pub const offset: u32 = 26;
        /// Mask (2 bits: 0b11 << 26)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod MODER12 {
        /// Offset (24 bits)
        pub const offset: u32 = 24;
        /// Mask (2 bits: 0b11 << 24)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod MODER11 {
        /// Offset (22 bits)
        pub const offset: u32 = 22;
        /// Mask (2 bits: 0b11 << 22)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod MODER10 {
        /// Offset (20 bits)
        pub const offset: u32 = 20;
        /// Mask (2 bits: 0b11 << 20)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod MODER9 {
        /// Offset (18 bits)
        pub const offset: u32 = 18;
        /// Mask (2 bits: 0b11 << 18)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod MODER8 {
        /// Offset (16 bits)
        pub const offset: u32 = 16;
        /// Mask (2 bits: 0b11 << 16)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod MODER7 {
        /// Offset (14 bits)
        pub const offset: u32 = 14;
        /// Mask (2 bits: 0b11 << 14)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod MODER6 {
        /// Offset (12 bits)
        pub const offset: u32 = 12;
        /// Mask (2 bits: 0b11 << 12)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod MODER5 {
        /// Offset (10 bits)
        pub const offset: u32 = 10;
        /// Mask (2 bits: 0b11 << 10)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod MODER4 {
        /// Offset (8 bits)
        pub const offset: u32 = 8;
        /// Mask (2 bits: 0b11 << 8)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod MODER3 {
        /// Offset (6 bits)
        pub const offset: u32 = 6;
        /// Mask (2 bits: 0b11 << 6)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod MODER2 {
        /// Offset (4 bits)
        pub const offset: u32 = 4;
        /// Mask (2 bits: 0b11 << 4)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod MODER1 {
        /// Offset (2 bits)
        pub const offset: u32 = 2;
        /// Mask (2 bits: 0b11 << 2)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod MODER0 {
        /// Offset (0 bits)
        pub const offset: u32 = 0;
        /// Mask (2 bits: 0b11 << 0)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}

/// GPIO port output type register
pub mod OTYPER {

    /// Port x configuration bits (y = 0..15)
    pub mod OT15 {
        /// Offset (15 bits)
        pub const offset: u32 = 15;
        /// Mask (1 bit: 1 << 15)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod OT14 {
        /// Offset (14 bits)
        pub const offset: u32 = 14;
        /// Mask (1 bit: 1 << 14)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod OT13 {
        /// Offset (13 bits)
        pub const offset: u32 = 13;
        /// Mask (1 bit: 1 << 13)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod OT12 {
        /// Offset (12 bits)
        pub const offset: u32 = 12;
        /// Mask (1 bit: 1 << 12)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod OT11 {
        /// Offset (11 bits)
        pub const offset: u32 = 11;
        /// Mask (1 bit: 1 << 11)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod OT10 {
        /// Offset (10 bits)
        pub const offset: u32 = 10;
        /// Mask (1 bit: 1 << 10)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod OT9 {
        /// Offset (9 bits)
        pub const offset: u32 = 9;
        /// Mask (1 bit: 1 << 9)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod OT8 {
        /// Offset (8 bits)
        pub const offset: u32 = 8;
        /// Mask (1 bit: 1 << 8)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod OT7 {
        /// Offset (7 bits)
        pub const offset: u32 = 7;
        /// Mask (1 bit: 1 << 7)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod OT6 {
        /// Offset (6 bits)
        pub const offset: u32 = 6;
        /// Mask (1 bit: 1 << 6)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod OT5 {
        /// Offset (5 bits)
        pub const offset: u32 = 5;
        /// Mask (1 bit: 1 << 5)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod OT4 {
        /// Offset (4 bits)
        pub const offset: u32 = 4;
        /// Mask (1 bit: 1 << 4)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod OT3 {
        /// Offset (3 bits)
        pub const offset: u32 = 3;
        /// Mask (1 bit: 1 << 3)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod OT2 {
        /// Offset (2 bits)
        pub const offset: u32 = 2;
        /// Mask (1 bit: 1 << 2)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod OT1 {
        /// Offset (1 bits)
        pub const offset: u32 = 1;
        /// Mask (1 bit: 1 << 1)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod OT0 {
        /// Offset (0 bits)
        pub const offset: u32 = 0;
        /// Mask (1 bit: 1 << 0)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}

/// GPIO port output speed register
pub mod OSPEEDR {

    /// Port x configuration bits (y = 0..15)
    pub mod OSPEEDR15 {
        /// Offset (30 bits)
        pub const offset: u32 = 30;
        /// Mask (2 bits: 0b11 << 30)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod OSPEEDR14 {
        /// Offset (28 bits)
        pub const offset: u32 = 28;
        /// Mask (2 bits: 0b11 << 28)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod OSPEEDR13 {
        /// Offset (26 bits)
        pub const offset: u32 = 26;
        /// Mask (2 bits: 0b11 << 26)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod OSPEEDR12 {
        /// Offset (24 bits)
        pub const offset: u32 = 24;
        /// Mask (2 bits: 0b11 << 24)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod OSPEEDR11 {
        /// Offset (22 bits)
        pub const offset: u32 = 22;
        /// Mask (2 bits: 0b11 << 22)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod OSPEEDR10 {
        /// Offset (20 bits)
        pub const offset: u32 = 20;
        /// Mask (2 bits: 0b11 << 20)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod OSPEEDR9 {
        /// Offset (18 bits)
        pub const offset: u32 = 18;
        /// Mask (2 bits: 0b11 << 18)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod OSPEEDR8 {
        /// Offset (16 bits)
        pub const offset: u32 = 16;
        /// Mask (2 bits: 0b11 << 16)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod OSPEEDR7 {
        /// Offset (14 bits)
        pub const offset: u32 = 14;
        /// Mask (2 bits: 0b11 << 14)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod OSPEEDR6 {
        /// Offset (12 bits)
        pub const offset: u32 = 12;
        /// Mask (2 bits: 0b11 << 12)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod OSPEEDR5 {
        /// Offset (10 bits)
        pub const offset: u32 = 10;
        /// Mask (2 bits: 0b11 << 10)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod OSPEEDR4 {
        /// Offset (8 bits)
        pub const offset: u32 = 8;
        /// Mask (2 bits: 0b11 << 8)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod OSPEEDR3 {
        /// Offset (6 bits)
        pub const offset: u32 = 6;
        /// Mask (2 bits: 0b11 << 6)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod OSPEEDR2 {
        /// Offset (4 bits)
        pub const offset: u32 = 4;
        /// Mask (2 bits: 0b11 << 4)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod OSPEEDR1 {
        /// Offset (2 bits)
        pub const offset: u32 = 2;
        /// Mask (2 bits: 0b11 << 2)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod OSPEEDR0 {
        /// Offset (0 bits)
        pub const offset: u32 = 0;
        /// Mask (2 bits: 0b11 << 0)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}

/// GPIO port pull-up/pull-down register
pub mod PUPDR {

    /// Port x configuration bits (y = 0..15)
    pub mod PUPDR15 {
        /// Offset (30 bits)
        pub const offset: u32 = 30;
        /// Mask (2 bits: 0b11 << 30)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod PUPDR14 {
        /// Offset (28 bits)
        pub const offset: u32 = 28;
        /// Mask (2 bits: 0b11 << 28)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod PUPDR13 {
        /// Offset (26 bits)
        pub const offset: u32 = 26;
        /// Mask (2 bits: 0b11 << 26)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod PUPDR12 {
        /// Offset (24 bits)
        pub const offset: u32 = 24;
        /// Mask (2 bits: 0b11 << 24)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod PUPDR11 {
        /// Offset (22 bits)
        pub const offset: u32 = 22;
        /// Mask (2 bits: 0b11 << 22)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod PUPDR10 {
        /// Offset (20 bits)
        pub const offset: u32 = 20;
        /// Mask (2 bits: 0b11 << 20)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod PUPDR9 {
        /// Offset (18 bits)
        pub const offset: u32 = 18;
        /// Mask (2 bits: 0b11 << 18)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod PUPDR8 {
        /// Offset (16 bits)
        pub const offset: u32 = 16;
        /// Mask (2 bits: 0b11 << 16)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod PUPDR7 {
        /// Offset (14 bits)
        pub const offset: u32 = 14;
        /// Mask (2 bits: 0b11 << 14)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod PUPDR6 {
        /// Offset (12 bits)
        pub const offset: u32 = 12;
        /// Mask (2 bits: 0b11 << 12)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod PUPDR5 {
        /// Offset (10 bits)
        pub const offset: u32 = 10;
        /// Mask (2 bits: 0b11 << 10)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod PUPDR4 {
        /// Offset (8 bits)
        pub const offset: u32 = 8;
        /// Mask (2 bits: 0b11 << 8)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod PUPDR3 {
        /// Offset (6 bits)
        pub const offset: u32 = 6;
        /// Mask (2 bits: 0b11 << 6)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod PUPDR2 {
        /// Offset (4 bits)
        pub const offset: u32 = 4;
        /// Mask (2 bits: 0b11 << 4)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod PUPDR1 {
        /// Offset (2 bits)
        pub const offset: u32 = 2;
        /// Mask (2 bits: 0b11 << 2)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x configuration bits (y = 0..15)
    pub mod PUPDR0 {
        /// Offset (0 bits)
        pub const offset: u32 = 0;
        /// Mask (2 bits: 0b11 << 0)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}

/// GPIO port input data register
pub mod IDR {

    /// Port input data (y = 0..15)
    pub mod IDR15 {
        /// Offset (15 bits)
        pub const offset: u32 = 15;
        /// Mask (1 bit: 1 << 15)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port input data (y = 0..15)
    pub mod IDR14 {
        /// Offset (14 bits)
        pub const offset: u32 = 14;
        /// Mask (1 bit: 1 << 14)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port input data (y = 0..15)
    pub mod IDR13 {
        /// Offset (13 bits)
        pub const offset: u32 = 13;
        /// Mask (1 bit: 1 << 13)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port input data (y = 0..15)
    pub mod IDR12 {
        /// Offset (12 bits)
        pub const offset: u32 = 12;
        /// Mask (1 bit: 1 << 12)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port input data (y = 0..15)
    pub mod IDR11 {
        /// Offset (11 bits)
        pub const offset: u32 = 11;
        /// Mask (1 bit: 1 << 11)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port input data (y = 0..15)
    pub mod IDR10 {
        /// Offset (10 bits)
        pub const offset: u32 = 10;
        /// Mask (1 bit: 1 << 10)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port input data (y = 0..15)
    pub mod IDR9 {
        /// Offset (9 bits)
        pub const offset: u32 = 9;
        /// Mask (1 bit: 1 << 9)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port input data (y = 0..15)
    pub mod IDR8 {
        /// Offset (8 bits)
        pub const offset: u32 = 8;
        /// Mask (1 bit: 1 << 8)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port input data (y = 0..15)
    pub mod IDR7 {
        /// Offset (7 bits)
        pub const offset: u32 = 7;
        /// Mask (1 bit: 1 << 7)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port input data (y = 0..15)
    pub mod IDR6 {
        /// Offset (6 bits)
        pub const offset: u32 = 6;
        /// Mask (1 bit: 1 << 6)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port input data (y = 0..15)
    pub mod IDR5 {
        /// Offset (5 bits)
        pub const offset: u32 = 5;
        /// Mask (1 bit: 1 << 5)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port input data (y = 0..15)
    pub mod IDR4 {
        /// Offset (4 bits)
        pub const offset: u32 = 4;
        /// Mask (1 bit: 1 << 4)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port input data (y = 0..15)
    pub mod IDR3 {
        /// Offset (3 bits)
        pub const offset: u32 = 3;
        /// Mask (1 bit: 1 << 3)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port input data (y = 0..15)
    pub mod IDR2 {
        /// Offset (2 bits)
        pub const offset: u32 = 2;
        /// Mask (1 bit: 1 << 2)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port input data (y = 0..15)
    pub mod IDR1 {
        /// Offset (1 bits)
        pub const offset: u32 = 1;
        /// Mask (1 bit: 1 << 1)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port input data (y = 0..15)
    pub mod IDR0 {
        /// Offset (0 bits)
        pub const offset: u32 = 0;
        /// Mask (1 bit: 1 << 0)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}

/// GPIO port output data register
pub mod ODR {

    /// Port output data (y = 0..15)
    pub mod ODR15 {
        /// Offset (15 bits)
        pub const offset: u32 = 15;
        /// Mask (1 bit: 1 << 15)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port output data (y = 0..15)
    pub mod ODR14 {
        /// Offset (14 bits)
        pub const offset: u32 = 14;
        /// Mask (1 bit: 1 << 14)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port output data (y = 0..15)
    pub mod ODR13 {
        /// Offset (13 bits)
        pub const offset: u32 = 13;
        /// Mask (1 bit: 1 << 13)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port output data (y = 0..15)
    pub mod ODR12 {
        /// Offset (12 bits)
        pub const offset: u32 = 12;
        /// Mask (1 bit: 1 << 12)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port output data (y = 0..15)
    pub mod ODR11 {
        /// Offset (11 bits)
        pub const offset: u32 = 11;
        /// Mask (1 bit: 1 << 11)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port output data (y = 0..15)
    pub mod ODR10 {
        /// Offset (10 bits)
        pub const offset: u32 = 10;
        /// Mask (1 bit: 1 << 10)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port output data (y = 0..15)
    pub mod ODR9 {
        /// Offset (9 bits)
        pub const offset: u32 = 9;
        /// Mask (1 bit: 1 << 9)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port output data (y = 0..15)
    pub mod ODR8 {
        /// Offset (8 bits)
        pub const offset: u32 = 8;
        /// Mask (1 bit: 1 << 8)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port output data (y = 0..15)
    pub mod ODR7 {
        /// Offset (7 bits)
        pub const offset: u32 = 7;
        /// Mask (1 bit: 1 << 7)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port output data (y = 0..15)
    pub mod ODR6 {
        /// Offset (6 bits)
        pub const offset: u32 = 6;
        /// Mask (1 bit: 1 << 6)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port output data (y = 0..15)
    pub mod ODR5 {
        /// Offset (5 bits)
        pub const offset: u32 = 5;
        /// Mask (1 bit: 1 << 5)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port output data (y = 0..15)
    pub mod ODR4 {
        /// Offset (4 bits)
        pub const offset: u32 = 4;
        /// Mask (1 bit: 1 << 4)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port output data (y = 0..15)
    pub mod ODR3 {
        /// Offset (3 bits)
        pub const offset: u32 = 3;
        /// Mask (1 bit: 1 << 3)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port output data (y = 0..15)
    pub mod ODR2 {
        /// Offset (2 bits)
        pub const offset: u32 = 2;
        /// Mask (1 bit: 1 << 2)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port output data (y = 0..15)
    pub mod ODR1 {
        /// Offset (1 bits)
        pub const offset: u32 = 1;
        /// Mask (1 bit: 1 << 1)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port output data (y = 0..15)
    pub mod ODR0 {
        /// Offset (0 bits)
        pub const offset: u32 = 0;
        /// Mask (1 bit: 1 << 0)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}

/// GPIO port bit set/reset register
pub mod BSRR {

    /// Port x reset bit y (y = 0..15)
    pub mod BR15 {
        /// Offset (31 bits)
        pub const offset: u32 = 31;
        /// Mask (1 bit: 1 << 31)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x reset bit y (y = 0..15)
    pub mod BR14 {
        /// Offset (30 bits)
        pub const offset: u32 = 30;
        /// Mask (1 bit: 1 << 30)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x reset bit y (y = 0..15)
    pub mod BR13 {
        /// Offset (29 bits)
        pub const offset: u32 = 29;
        /// Mask (1 bit: 1 << 29)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x reset bit y (y = 0..15)
    pub mod BR12 {
        /// Offset (28 bits)
        pub const offset: u32 = 28;
        /// Mask (1 bit: 1 << 28)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x reset bit y (y = 0..15)
    pub mod BR11 {
        /// Offset (27 bits)
        pub const offset: u32 = 27;
        /// Mask (1 bit: 1 << 27)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x reset bit y (y = 0..15)
    pub mod BR10 {
        /// Offset (26 bits)
        pub const offset: u32 = 26;
        /// Mask (1 bit: 1 << 26)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x reset bit y (y = 0..15)
    pub mod BR9 {
        /// Offset (25 bits)
        pub const offset: u32 = 25;
        /// Mask (1 bit: 1 << 25)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x reset bit y (y = 0..15)
    pub mod BR8 {
        /// Offset (24 bits)
        pub const offset: u32 = 24;
        /// Mask (1 bit: 1 << 24)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x reset bit y (y = 0..15)
    pub mod BR7 {
        /// Offset (23 bits)
        pub const offset: u32 = 23;
        /// Mask (1 bit: 1 << 23)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x reset bit y (y = 0..15)
    pub mod BR6 {
        /// Offset (22 bits)
        pub const offset: u32 = 22;
        /// Mask (1 bit: 1 << 22)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x reset bit y (y = 0..15)
    pub mod BR5 {
        /// Offset (21 bits)
        pub const offset: u32 = 21;
        /// Mask (1 bit: 1 << 21)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x reset bit y (y = 0..15)
    pub mod BR4 {
        /// Offset (20 bits)
        pub const offset: u32 = 20;
        /// Mask (1 bit: 1 << 20)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x reset bit y (y = 0..15)
    pub mod BR3 {
        /// Offset (19 bits)
        pub const offset: u32 = 19;
        /// Mask (1 bit: 1 << 19)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x reset bit y (y = 0..15)
    pub mod BR2 {
        /// Offset (18 bits)
        pub const offset: u32 = 18;
        /// Mask (1 bit: 1 << 18)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x reset bit y (y = 0..15)
    pub mod BR1 {
        /// Offset (17 bits)
        pub const offset: u32 = 17;
        /// Mask (1 bit: 1 << 17)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x set bit y (y= 0..15)
    pub mod BR0 {
        /// Offset (16 bits)
        pub const offset: u32 = 16;
        /// Mask (1 bit: 1 << 16)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x set bit y (y= 0..15)
    pub mod BS15 {
        /// Offset (15 bits)
        pub const offset: u32 = 15;
        /// Mask (1 bit: 1 << 15)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x set bit y (y= 0..15)
    pub mod BS14 {
        /// Offset (14 bits)
        pub const offset: u32 = 14;
        /// Mask (1 bit: 1 << 14)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x set bit y (y= 0..15)
    pub mod BS13 {
        /// Offset (13 bits)
        pub const offset: u32 = 13;
        /// Mask (1 bit: 1 << 13)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x set bit y (y= 0..15)
    pub mod BS12 {
        /// Offset (12 bits)
        pub const offset: u32 = 12;
        /// Mask (1 bit: 1 << 12)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x set bit y (y= 0..15)
    pub mod BS11 {
        /// Offset (11 bits)
        pub const offset: u32 = 11;
        /// Mask (1 bit: 1 << 11)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x set bit y (y= 0..15)
    pub mod BS10 {
        /// Offset (10 bits)
        pub const offset: u32 = 10;
        /// Mask (1 bit: 1 << 10)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x set bit y (y= 0..15)
    pub mod BS9 {
        /// Offset (9 bits)
        pub const offset: u32 = 9;
        /// Mask (1 bit: 1 << 9)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x set bit y (y= 0..15)
    pub mod BS8 {
        /// Offset (8 bits)
        pub const offset: u32 = 8;
        /// Mask (1 bit: 1 << 8)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x set bit y (y= 0..15)
    pub mod BS7 {
        /// Offset (7 bits)
        pub const offset: u32 = 7;
        /// Mask (1 bit: 1 << 7)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x set bit y (y= 0..15)
    pub mod BS6 {
        /// Offset (6 bits)
        pub const offset: u32 = 6;
        /// Mask (1 bit: 1 << 6)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x set bit y (y= 0..15)
    pub mod BS5 {
        /// Offset (5 bits)
        pub const offset: u32 = 5;
        /// Mask (1 bit: 1 << 5)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x set bit y (y= 0..15)
    pub mod BS4 {
        /// Offset (4 bits)
        pub const offset: u32 = 4;
        /// Mask (1 bit: 1 << 4)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x set bit y (y= 0..15)
    pub mod BS3 {
        /// Offset (3 bits)
        pub const offset: u32 = 3;
        /// Mask (1 bit: 1 << 3)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x set bit y (y= 0..15)
    pub mod BS2 {
        /// Offset (2 bits)
        pub const offset: u32 = 2;
        /// Mask (1 bit: 1 << 2)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x set bit y (y= 0..15)
    pub mod BS1 {
        /// Offset (1 bits)
        pub const offset: u32 = 1;
        /// Mask (1 bit: 1 << 1)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x set bit y (y= 0..15)
    pub mod BS0 {
        /// Offset (0 bits)
        pub const offset: u32 = 0;
        /// Mask (1 bit: 1 << 0)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}

/// GPIO port configuration lock register
pub mod LCKR {

    /// Port x lock bit y (y= 0..15)
    pub mod LCKK {
        /// Offset (16 bits)
        pub const offset: u32 = 16;
        /// Mask (1 bit: 1 << 16)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x lock bit y (y= 0..15)
    pub mod LCK15 {
        /// Offset (15 bits)
        pub const offset: u32 = 15;
        /// Mask (1 bit: 1 << 15)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x lock bit y (y= 0..15)
    pub mod LCK14 {
        /// Offset (14 bits)
        pub const offset: u32 = 14;
        /// Mask (1 bit: 1 << 14)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x lock bit y (y= 0..15)
    pub mod LCK13 {
        /// Offset (13 bits)
        pub const offset: u32 = 13;
        /// Mask (1 bit: 1 << 13)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x lock bit y (y= 0..15)
    pub mod LCK12 {
        /// Offset (12 bits)
        pub const offset: u32 = 12;
        /// Mask (1 bit: 1 << 12)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x lock bit y (y= 0..15)
    pub mod LCK11 {
        /// Offset (11 bits)
        pub const offset: u32 = 11;
        /// Mask (1 bit: 1 << 11)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x lock bit y (y= 0..15)
    pub mod LCK10 {
        /// Offset (10 bits)
        pub const offset: u32 = 10;
        /// Mask (1 bit: 1 << 10)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x lock bit y (y= 0..15)
    pub mod LCK9 {
        /// Offset (9 bits)
        pub const offset: u32 = 9;
        /// Mask (1 bit: 1 << 9)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x lock bit y (y= 0..15)
    pub mod LCK8 {
        /// Offset (8 bits)
        pub const offset: u32 = 8;
        /// Mask (1 bit: 1 << 8)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x lock bit y (y= 0..15)
    pub mod LCK7 {
        /// Offset (7 bits)
        pub const offset: u32 = 7;
        /// Mask (1 bit: 1 << 7)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x lock bit y (y= 0..15)
    pub mod LCK6 {
        /// Offset (6 bits)
        pub const offset: u32 = 6;
        /// Mask (1 bit: 1 << 6)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x lock bit y (y= 0..15)
    pub mod LCK5 {
        /// Offset (5 bits)
        pub const offset: u32 = 5;
        /// Mask (1 bit: 1 << 5)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x lock bit y (y= 0..15)
    pub mod LCK4 {
        /// Offset (4 bits)
        pub const offset: u32 = 4;
        /// Mask (1 bit: 1 << 4)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x lock bit y (y= 0..15)
    pub mod LCK3 {
        /// Offset (3 bits)
        pub const offset: u32 = 3;
        /// Mask (1 bit: 1 << 3)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x lock bit y (y= 0..15)
    pub mod LCK2 {
        /// Offset (2 bits)
        pub const offset: u32 = 2;
        /// Mask (1 bit: 1 << 2)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x lock bit y (y= 0..15)
    pub mod LCK1 {
        /// Offset (1 bits)
        pub const offset: u32 = 1;
        /// Mask (1 bit: 1 << 1)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port x lock bit y (y= 0..15)
    pub mod LCK0 {
        /// Offset (0 bits)
        pub const offset: u32 = 0;
        /// Mask (1 bit: 1 << 0)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}

/// GPIO alternate function low register
pub mod AFRL {

    /// Alternate function selection for port x bit y (y = 0..7)
    pub mod AFSEL7 {
        /// Offset (28 bits)
        pub const offset: u32 = 28;
        /// Mask (4 bits: 0b1111 << 28)
        pub const mask: u32 = 0b1111 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Alternate function selection for port x bit y (y = 0..7)
    pub mod AFSEL6 {
        /// Offset (24 bits)
        pub const offset: u32 = 24;
        /// Mask (4 bits: 0b1111 << 24)
        pub const mask: u32 = 0b1111 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Alternate function selection for port x bit y (y = 0..7)
    pub mod AFSEL5 {
        /// Offset (20 bits)
        pub const offset: u32 = 20;
        /// Mask (4 bits: 0b1111 << 20)
        pub const mask: u32 = 0b1111 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Alternate function selection for port x bit y (y = 0..7)
    pub mod AFSEL4 {
        /// Offset (16 bits)
        pub const offset: u32 = 16;
        /// Mask (4 bits: 0b1111 << 16)
        pub const mask: u32 = 0b1111 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Alternate function selection for port x bit y (y = 0..7)
    pub mod AFSEL3 {
        /// Offset (12 bits)
        pub const offset: u32 = 12;
        /// Mask (4 bits: 0b1111 << 12)
        pub const mask: u32 = 0b1111 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Alternate function selection for port x bit y (y = 0..7)
    pub mod AFSEL2 {
        /// Offset (8 bits)
        pub const offset: u32 = 8;
        /// Mask (4 bits: 0b1111 << 8)
        pub const mask: u32 = 0b1111 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Alternate function selection for port x bit y (y = 0..7)
    pub mod AFSEL1 {
        /// Offset (4 bits)
        pub const offset: u32 = 4;
        /// Mask (4 bits: 0b1111 << 4)
        pub const mask: u32 = 0b1111 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Alternate function selection for port x bit y (y = 0..7)
    pub mod AFSEL0 {
        /// Offset (0 bits)
        pub const offset: u32 = 0;
        /// Mask (4 bits: 0b1111 << 0)
        pub const mask: u32 = 0b1111 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}

/// GPIO alternate function high register
pub mod AFRH {

    /// Alternate function selection for port x bit y (y = 8..15)
    pub mod AFSEL15 {
        /// Offset (28 bits)
        pub const offset: u32 = 28;
        /// Mask (4 bits: 0b1111 << 28)
        pub const mask: u32 = 0b1111 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Alternate function selection for port x bit y (y = 8..15)
    pub mod AFSEL14 {
        /// Offset (24 bits)
        pub const offset: u32 = 24;
        /// Mask (4 bits: 0b1111 << 24)
        pub const mask: u32 = 0b1111 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Alternate function selection for port x bit y (y = 8..15)
    pub mod AFSEL13 {
        /// Offset (20 bits)
        pub const offset: u32 = 20;
        /// Mask (4 bits: 0b1111 << 20)
        pub const mask: u32 = 0b1111 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Alternate function selection for port x bit y (y = 8..15)
    pub mod AFSEL12 {
        /// Offset (16 bits)
        pub const offset: u32 = 16;
        /// Mask (4 bits: 0b1111 << 16)
        pub const mask: u32 = 0b1111 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Alternate function selection for port x bit y (y = 8..15)
    pub mod AFSEL11 {
        /// Offset (12 bits)
        pub const offset: u32 = 12;
        /// Mask (4 bits: 0b1111 << 12)
        pub const mask: u32 = 0b1111 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Alternate function selection for port x bit y (y = 8..15)
    pub mod AFSEL10 {
        /// Offset (8 bits)
        pub const offset: u32 = 8;
        /// Mask (4 bits: 0b1111 << 8)
        pub const mask: u32 = 0b1111 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Alternate function selection for port x bit y (y = 8..15)
    pub mod AFSEL9 {
        /// Offset (4 bits)
        pub const offset: u32 = 4;
        /// Mask (4 bits: 0b1111 << 4)
        pub const mask: u32 = 0b1111 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Alternate function selection for port x bit y (y = 8..15)
    pub mod AFSEL8 {
        /// Offset (0 bits)
        pub const offset: u32 = 0;
        /// Mask (4 bits: 0b1111 << 0)
        pub const mask: u32 = 0b1111 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}

/// port bit reset register
pub mod BRR {

    /// Port Reset bit
    pub mod BR0 {
        /// Offset (0 bits)
        pub const offset: u32 = 0;
        /// Mask (1 bit: 1 << 0)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port Reset bit
    pub mod BR1 {
        /// Offset (1 bits)
        pub const offset: u32 = 1;
        /// Mask (1 bit: 1 << 1)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port Reset bit
    pub mod BR2 {
        /// Offset (2 bits)
        pub const offset: u32 = 2;
        /// Mask (1 bit: 1 << 2)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port Reset bit
    pub mod BR3 {
        /// Offset (3 bits)
        pub const offset: u32 = 3;
        /// Mask (1 bit: 1 << 3)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port Reset bit
    pub mod BR4 {
        /// Offset (4 bits)
        pub const offset: u32 = 4;
        /// Mask (1 bit: 1 << 4)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port Reset bit
    pub mod BR5 {
        /// Offset (5 bits)
        pub const offset: u32 = 5;
        /// Mask (1 bit: 1 << 5)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port Reset bit
    pub mod BR6 {
        /// Offset (6 bits)
        pub const offset: u32 = 6;
        /// Mask (1 bit: 1 << 6)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port Reset bit
    pub mod BR7 {
        /// Offset (7 bits)
        pub const offset: u32 = 7;
        /// Mask (1 bit: 1 << 7)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port Reset bit
    pub mod BR8 {
        /// Offset (8 bits)
        pub const offset: u32 = 8;
        /// Mask (1 bit: 1 << 8)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port Reset bit
    pub mod BR9 {
        /// Offset (9 bits)
        pub const offset: u32 = 9;
        /// Mask (1 bit: 1 << 9)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port Reset bit
    pub mod BR10 {
        /// Offset (10 bits)
        pub const offset: u32 = 10;
        /// Mask (1 bit: 1 << 10)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port Reset bit
    pub mod BR11 {
        /// Offset (11 bits)
        pub const offset: u32 = 11;
        /// Mask (1 bit: 1 << 11)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port Reset bit
    pub mod BR12 {
        /// Offset (12 bits)
        pub const offset: u32 = 12;
        /// Mask (1 bit: 1 << 12)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port Reset bit
    pub mod BR13 {
        /// Offset (13 bits)
        pub const offset: u32 = 13;
        /// Mask (1 bit: 1 << 13)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port Reset bit
    pub mod BR14 {
        /// Offset (14 bits)
        pub const offset: u32 = 14;
        /// Mask (1 bit: 1 << 14)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// Port Reset bit
    pub mod BR15 {
        /// Offset (15 bits)
        pub const offset: u32 = 15;
        /// Mask (1 bit: 1 << 15)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}
#[repr(C)]
pub struct RegisterBlock {
    /// GPIO port mode register
    pub MODER: RWRegister<u32>,

    /// GPIO port output type register
    pub OTYPER: RWRegister<u32>,

    /// GPIO port output speed register
    pub OSPEEDR: RWRegister<u32>,

    /// GPIO port pull-up/pull-down register
    pub PUPDR: RWRegister<u32>,

    /// GPIO port input data register
    pub IDR: RORegister<u32>,

    /// GPIO port output data register
    pub ODR: RWRegister<u32>,

    /// GPIO port bit set/reset register
    pub BSRR: WORegister<u32>,

    /// GPIO port configuration lock register
    pub LCKR: RWRegister<u32>,

    /// GPIO alternate function low register
    pub AFRL: RWRegister<u32>,

    /// GPIO alternate function high register
    pub AFRH: RWRegister<u32>,

    /// port bit reset register
    pub BRR: WORegister<u32>,
}
pub struct ResetValues {
    pub MODER: u32,
    pub OTYPER: u32,
    pub OSPEEDR: u32,
    pub PUPDR: u32,
    pub IDR: u32,
    pub ODR: u32,
    pub BSRR: u32,
    pub LCKR: u32,
    pub AFRL: u32,
    pub AFRH: u32,
    pub BRR: u32,
}
#[cfg(not(feature = "nosync"))]
pub struct Instance {
    pub(crate) addr: u32,
    pub(crate) _marker: PhantomData<*const RegisterBlock>,
}
#[cfg(not(feature = "nosync"))]
impl ::core::ops::Deref for Instance {
    type Target = RegisterBlock;
    #[inline(always)]
    fn deref(&self) -> &RegisterBlock {
        unsafe { &*(self.addr as *const _) }
    }
}
#[cfg(feature = "rtic")]
unsafe impl Send for Instance {}

/// Access functions for the GPIOA peripheral instance
pub mod GPIOA {
    use super::ResetValues;

    #[cfg(not(feature = "nosync"))]
    use super::Instance;

    #[cfg(not(feature = "nosync"))]
    const INSTANCE: Instance = Instance {
        addr: 0x48000000,
        _marker: ::core::marker::PhantomData,
    };

    /// Reset values for each field in GPIOA
    pub const reset: ResetValues = ResetValues {
        MODER: 0xABFFFFFF,
        OTYPER: 0x00000000,
        OSPEEDR: 0x0C000000,
        PUPDR: 0x64000000,
        IDR: 0x00000000,
        ODR: 0x00000000,
        BSRR: 0x00000000,
        LCKR: 0x00000000,
        AFRL: 0x00000000,
        AFRH: 0x00000000,
        BRR: 0x00000000,
    };

    #[cfg(not(feature = "nosync"))]
    #[allow(renamed_and_removed_lints)]
    #[allow(private_no_mangle_statics)]
    #[no_mangle]
    static mut GPIOA_TAKEN: bool = false;

    /// Safe access to GPIOA
    ///
    /// This function returns `Some(Instance)` if this instance is not
    /// currently taken, and `None` if it is. This ensures that if you
    /// do get `Some(Instance)`, you are ensured unique access to
    /// the peripheral and there cannot be data races (unless other
    /// code uses `unsafe`, of course). You can then pass the
    /// `Instance` around to other functions as required. When you're
    /// done with it, you can call `release(instance)` to return it.
    ///
    /// `Instance` itself dereferences to a `RegisterBlock`, which
    /// provides access to the peripheral's registers.
    #[cfg(not(feature = "nosync"))]
    #[inline]
    pub fn take() -> Option<Instance> {
        external_cortex_m::interrupt::free(|_| unsafe {
            if GPIOA_TAKEN {
                None
            } else {
                GPIOA_TAKEN = true;
                Some(INSTANCE)
            }
        })
    }

    /// Release exclusive access to GPIOA
    ///
    /// This function allows you to return an `Instance` so that it
    /// is available to `take()` again. This function will panic if
    /// you return a different `Instance` or if this instance is not
    /// already taken.
    #[cfg(not(feature = "nosync"))]
    #[inline]
    pub fn release(inst: Instance) {
        external_cortex_m::interrupt::free(|_| unsafe {
            if GPIOA_TAKEN && inst.addr == INSTANCE.addr {
                GPIOA_TAKEN = false;
            } else {
                panic!("Released a peripheral which was not taken");
            }
        });
    }

    /// Unsafely steal GPIOA
    ///
    /// This function is similar to take() but forcibly takes the
    /// Instance, marking it as taken irregardless of its previous
    /// state.
    #[cfg(not(feature = "nosync"))]
    #[inline]
    pub unsafe fn steal() -> Instance {
        GPIOA_TAKEN = true;
        INSTANCE
    }
}

/// Raw pointer to GPIOA
///
/// Dereferencing this is unsafe because you are not ensured unique
/// access to the peripheral, so you may encounter data races with
/// other users of this peripheral. It is up to you to ensure you
/// will not cause data races.
///
/// This constant is provided for ease of use in unsafe code: you can
/// simply call for example `write_reg!(gpio, GPIOA, ODR, 1);`.
pub const GPIOA: *const RegisterBlock = 0x48000000 as *const _;

/// Access functions for the GPIOB peripheral instance
pub mod GPIOB {
    use super::ResetValues;

    #[cfg(not(feature = "nosync"))]
    use super::Instance;

    #[cfg(not(feature = "nosync"))]
    const INSTANCE: Instance = Instance {
        addr: 0x48000400,
        _marker: ::core::marker::PhantomData,
    };

    /// Reset values for each field in GPIOB
    pub const reset: ResetValues = ResetValues {
        MODER: 0xFFFFFEBF,
        OTYPER: 0x00000000,
        OSPEEDR: 0x000000C0,
        PUPDR: 0x00000100,
        IDR: 0x00000000,
        ODR: 0x00000000,
        BSRR: 0x00000000,
        LCKR: 0x00000000,
        AFRL: 0x00000000,
        AFRH: 0x00000000,
        BRR: 0x00000000,
    };

    #[cfg(not(feature = "nosync"))]
    #[allow(renamed_and_removed_lints)]
    #[allow(private_no_mangle_statics)]
    #[no_mangle]
    static mut GPIOB_TAKEN: bool = false;

    /// Safe access to GPIOB
    ///
    /// This function returns `Some(Instance)` if this instance is not
    /// currently taken, and `None` if it is. This ensures that if you
    /// do get `Some(Instance)`, you are ensured unique access to
    /// the peripheral and there cannot be data races (unless other
    /// code uses `unsafe`, of course). You can then pass the
    /// `Instance` around to other functions as required. When you're
    /// done with it, you can call `release(instance)` to return it.
    ///
    /// `Instance` itself dereferences to a `RegisterBlock`, which
    /// provides access to the peripheral's registers.
    #[cfg(not(feature = "nosync"))]
    #[inline]
    pub fn take() -> Option<Instance> {
        external_cortex_m::interrupt::free(|_| unsafe {
            if GPIOB_TAKEN {
                None
            } else {
                GPIOB_TAKEN = true;
                Some(INSTANCE)
            }
        })
    }

    /// Release exclusive access to GPIOB
    ///
    /// This function allows you to return an `Instance` so that it
    /// is available to `take()` again. This function will panic if
    /// you return a different `Instance` or if this instance is not
    /// already taken.
    #[cfg(not(feature = "nosync"))]
    #[inline]
    pub fn release(inst: Instance) {
        external_cortex_m::interrupt::free(|_| unsafe {
            if GPIOB_TAKEN && inst.addr == INSTANCE.addr {
                GPIOB_TAKEN = false;
            } else {
                panic!("Released a peripheral which was not taken");
            }
        });
    }

    /// Unsafely steal GPIOB
    ///
    /// This function is similar to take() but forcibly takes the
    /// Instance, marking it as taken irregardless of its previous
    /// state.
    #[cfg(not(feature = "nosync"))]
    #[inline]
    pub unsafe fn steal() -> Instance {
        GPIOB_TAKEN = true;
        INSTANCE
    }
}

/// Raw pointer to GPIOB
///
/// Dereferencing this is unsafe because you are not ensured unique
/// access to the peripheral, so you may encounter data races with
/// other users of this peripheral. It is up to you to ensure you
/// will not cause data races.
///
/// This constant is provided for ease of use in unsafe code: you can
/// simply call for example `write_reg!(gpio, GPIOA, ODR, 1);`.
pub const GPIOB: *const RegisterBlock = 0x48000400 as *const _;

/// Access functions for the GPIOC peripheral instance
pub mod GPIOC {
    use super::ResetValues;

    #[cfg(not(feature = "nosync"))]
    use super::Instance;

    #[cfg(not(feature = "nosync"))]
    const INSTANCE: Instance = Instance {
        addr: 0x48000800,
        _marker: ::core::marker::PhantomData,
    };

    /// Reset values for each field in GPIOC
    pub const reset: ResetValues = ResetValues {
        MODER: 0xFFFFFFFF,
        OTYPER: 0x00000000,
        OSPEEDR: 0x000000C0,
        PUPDR: 0x00000100,
        IDR: 0x00000000,
        ODR: 0x00000000,
        BSRR: 0x00000000,
        LCKR: 0x00000000,
        AFRL: 0x00000000,
        AFRH: 0x00000000,
        BRR: 0x00000000,
    };

    #[cfg(not(feature = "nosync"))]
    #[allow(renamed_and_removed_lints)]
    #[allow(private_no_mangle_statics)]
    #[no_mangle]
    static mut GPIOC_TAKEN: bool = false;

    /// Safe access to GPIOC
    ///
    /// This function returns `Some(Instance)` if this instance is not
    /// currently taken, and `None` if it is. This ensures that if you
    /// do get `Some(Instance)`, you are ensured unique access to
    /// the peripheral and there cannot be data races (unless other
    /// code uses `unsafe`, of course). You can then pass the
    /// `Instance` around to other functions as required. When you're
    /// done with it, you can call `release(instance)` to return it.
    ///
    /// `Instance` itself dereferences to a `RegisterBlock`, which
    /// provides access to the peripheral's registers.
    #[cfg(not(feature = "nosync"))]
    #[inline]
    pub fn take() -> Option<Instance> {
        external_cortex_m::interrupt::free(|_| unsafe {
            if GPIOC_TAKEN {
                None
            } else {
                GPIOC_TAKEN = true;
                Some(INSTANCE)
            }
        })
    }

    /// Release exclusive access to GPIOC
    ///
    /// This function allows you to return an `Instance` so that it
    /// is available to `take()` again. This function will panic if
    /// you return a different `Instance` or if this instance is not
    /// already taken.
    #[cfg(not(feature = "nosync"))]
    #[inline]
    pub fn release(inst: Instance) {
        external_cortex_m::interrupt::free(|_| unsafe {
            if GPIOC_TAKEN && inst.addr == INSTANCE.addr {
                GPIOC_TAKEN = false;
            } else {
                panic!("Released a peripheral which was not taken");
            }
        });
    }

    /// Unsafely steal GPIOC
    ///
    /// This function is similar to take() but forcibly takes the
    /// Instance, marking it as taken irregardless of its previous
    /// state.
    #[cfg(not(feature = "nosync"))]
    #[inline]
    pub unsafe fn steal() -> Instance {
        GPIOC_TAKEN = true;
        INSTANCE
    }
}

/// Raw pointer to GPIOC
///
/// Dereferencing this is unsafe because you are not ensured unique
/// access to the peripheral, so you may encounter data races with
/// other users of this peripheral. It is up to you to ensure you
/// will not cause data races.
///
/// This constant is provided for ease of use in unsafe code: you can
/// simply call for example `write_reg!(gpio, GPIOA, ODR, 1);`.
pub const GPIOC: *const RegisterBlock = 0x48000800 as *const _;

/// Access functions for the GPIOD peripheral instance
pub mod GPIOD {
    use super::ResetValues;

    #[cfg(not(feature = "nosync"))]
    use super::Instance;

    #[cfg(not(feature = "nosync"))]
    const INSTANCE: Instance = Instance {
        addr: 0x48000c00,
        _marker: ::core::marker::PhantomData,
    };

    /// Reset values for each field in GPIOD
    pub const reset: ResetValues = ResetValues {
        MODER: 0xFFFFFFFF,
        OTYPER: 0x00000000,
        OSPEEDR: 0x000000C0,
        PUPDR: 0x00000100,
        IDR: 0x00000000,
        ODR: 0x00000000,
        BSRR: 0x00000000,
        LCKR: 0x00000000,
        AFRL: 0x00000000,
        AFRH: 0x00000000,
        BRR: 0x00000000,
    };

    #[cfg(not(feature = "nosync"))]
    #[allow(renamed_and_removed_lints)]
    #[allow(private_no_mangle_statics)]
    #[no_mangle]
    static mut GPIOD_TAKEN: bool = false;

    /// Safe access to GPIOD
    ///
    /// This function returns `Some(Instance)` if this instance is not
    /// currently taken, and `None` if it is. This ensures that if you
    /// do get `Some(Instance)`, you are ensured unique access to
    /// the peripheral and there cannot be data races (unless other
    /// code uses `unsafe`, of course). You can then pass the
    /// `Instance` around to other functions as required. When you're
    /// done with it, you can call `release(instance)` to return it.
    ///
    /// `Instance` itself dereferences to a `RegisterBlock`, which
    /// provides access to the peripheral's registers.
    #[cfg(not(feature = "nosync"))]
    #[inline]
    pub fn take() -> Option<Instance> {
        external_cortex_m::interrupt::free(|_| unsafe {
            if GPIOD_TAKEN {
                None
            } else {
                GPIOD_TAKEN = true;
                Some(INSTANCE)
            }
        })
    }

    /// Release exclusive access to GPIOD
    ///
    /// This function allows you to return an `Instance` so that it
    /// is available to `take()` again. This function will panic if
    /// you return a different `Instance` or if this instance is not
    /// already taken.
    #[cfg(not(feature = "nosync"))]
    #[inline]
    pub fn release(inst: Instance) {
        external_cortex_m::interrupt::free(|_| unsafe {
            if GPIOD_TAKEN && inst.addr == INSTANCE.addr {
                GPIOD_TAKEN = false;
            } else {
                panic!("Released a peripheral which was not taken");
            }
        });
    }

    /// Unsafely steal GPIOD
    ///
    /// This function is similar to take() but forcibly takes the
    /// Instance, marking it as taken irregardless of its previous
    /// state.
    #[cfg(not(feature = "nosync"))]
    #[inline]
    pub unsafe fn steal() -> Instance {
        GPIOD_TAKEN = true;
        INSTANCE
    }
}

/// Raw pointer to GPIOD
///
/// Dereferencing this is unsafe because you are not ensured unique
/// access to the peripheral, so you may encounter data races with
/// other users of this peripheral. It is up to you to ensure you
/// will not cause data races.
///
/// This constant is provided for ease of use in unsafe code: you can
/// simply call for example `write_reg!(gpio, GPIOA, ODR, 1);`.
pub const GPIOD: *const RegisterBlock = 0x48000c00 as *const _;