[−][src]Struct stm32l4xx_hal::stm32::dfsdm::dfsdm3_cr1::W
Value to write to the register
Methods
impl W
[src]
pub fn reset_value() -> W
[src]
Reset value of the register
pub unsafe fn bits(&mut self, bits: u32) -> &mut W
[src]
Writes raw bits to the register
pub fn awfsel(&mut self) -> _AWFSELW
[src]
Bit 30 - Analog watchdog fast mode select
pub fn fast(&mut self) -> _FASTW
[src]
Bit 29 - Fast conversion mode selection for regular conversions
pub fn rch(&mut self) -> _RCHW
[src]
Bits 24:26 - Regular channel selection
pub fn rdmaen(&mut self) -> _RDMAENW
[src]
Bit 21 - DMA channel enabled to read data for the regular conversion
pub fn rsync(&mut self) -> _RSYNCW
[src]
Bit 19 - Launch regular conversion synchronously with DFSDM0
pub fn rcont(&mut self) -> _RCONTW
[src]
Bit 18 - Continuous mode selection for regular conversions
pub fn rswstart(&mut self) -> _RSWSTARTW
[src]
Bit 17 - Software start of a conversion on the regular channel
pub fn jexten(&mut self) -> _JEXTENW
[src]
Bits 13:14 - Trigger enable and trigger edge selection for injected conversions
pub fn jextsel(&mut self) -> _JEXTSELW
[src]
Bits 8:10 - Trigger signal selection for launching injected conversions
pub fn jdmaen(&mut self) -> _JDMAENW
[src]
Bit 5 - DMA channel enabled to read data for the injected channel group
pub fn jscan(&mut self) -> _JSCANW
[src]
Bit 4 - Scanning conversion mode for injected conversions
pub fn jsync(&mut self) -> _JSYNCW
[src]
Bit 3 - Launch an injected conversion synchronously with the DFSDM0 JSWSTART trigger
pub fn jswstart(&mut self) -> _JSWSTARTW
[src]
Bit 1 - Start a conversion of the injected group of channels
pub fn dfen(&mut self) -> _DFENW
[src]
Bit 0 - DFSDM enable
Auto Trait Implementations
Blanket Implementations
impl<T> From for T
[src]
impl<T, U> TryFrom for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = !
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T, U> Into for T where
U: From<T>,
[src]
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Same for T
type Output = T
Should always be Self