#[doc = "Register `CR3` reader"]
pub struct R(crate::R<CR3_SPEC>);
impl core::ops::Deref for R {
type Target = crate::R<CR3_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl From<crate::R<CR3_SPEC>> for R {
#[inline(always)]
fn from(reader: crate::R<CR3_SPEC>) -> Self {
R(reader)
}
}
#[doc = "Register `CR3` writer"]
pub struct W(crate::W<CR3_SPEC>);
impl core::ops::Deref for W {
type Target = crate::W<CR3_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl core::ops::DerefMut for W {
#[inline(always)]
fn deref_mut(&mut self) -> &mut Self::Target {
&mut self.0
}
}
impl From<crate::W<CR3_SPEC>> for W {
#[inline(always)]
fn from(writer: crate::W<CR3_SPEC>) -> Self {
W(writer)
}
}
#[doc = "Field `EWF` reader - Enable internal wakeup line"]
pub type EWF_R = crate::BitReader<bool>;
#[doc = "Field `EWF` writer - Enable internal wakeup line"]
pub type EWF_W<'a, const O: u8> = crate::BitWriter<'a, u32, CR3_SPEC, bool, O>;
#[doc = "Field `APC` reader - Apply pull-up and pull-down configuration"]
pub type APC_R = crate::BitReader<bool>;
#[doc = "Field `APC` writer - Apply pull-up and pull-down configuration"]
pub type APC_W<'a, const O: u8> = crate::BitWriter<'a, u32, CR3_SPEC, bool, O>;
#[doc = "Field `RRS` reader - SRAM2 retention in Standby mode"]
pub type RRS_R = crate::BitReader<bool>;
#[doc = "Field `RRS` writer - SRAM2 retention in Standby mode"]
pub type RRS_W<'a, const O: u8> = crate::BitWriter<'a, u32, CR3_SPEC, bool, O>;
#[doc = "Field `EWUP5` reader - Enable Wakeup pin WKUP5"]
pub type EWUP5_R = crate::BitReader<bool>;
#[doc = "Field `EWUP5` writer - Enable Wakeup pin WKUP5"]
pub type EWUP5_W<'a, const O: u8> = crate::BitWriter<'a, u32, CR3_SPEC, bool, O>;
#[doc = "Field `EWUP4` reader - Enable Wakeup pin WKUP4"]
pub type EWUP4_R = crate::BitReader<bool>;
#[doc = "Field `EWUP4` writer - Enable Wakeup pin WKUP4"]
pub type EWUP4_W<'a, const O: u8> = crate::BitWriter<'a, u32, CR3_SPEC, bool, O>;
#[doc = "Field `EWUP3` reader - Enable Wakeup pin WKUP3"]
pub type EWUP3_R = crate::BitReader<bool>;
#[doc = "Field `EWUP3` writer - Enable Wakeup pin WKUP3"]
pub type EWUP3_W<'a, const O: u8> = crate::BitWriter<'a, u32, CR3_SPEC, bool, O>;
#[doc = "Field `EWUP2` reader - Enable Wakeup pin WKUP2"]
pub type EWUP2_R = crate::BitReader<bool>;
#[doc = "Field `EWUP2` writer - Enable Wakeup pin WKUP2"]
pub type EWUP2_W<'a, const O: u8> = crate::BitWriter<'a, u32, CR3_SPEC, bool, O>;
#[doc = "Field `EWUP1` reader - Enable Wakeup pin WKUP1"]
pub type EWUP1_R = crate::BitReader<bool>;
#[doc = "Field `EWUP1` writer - Enable Wakeup pin WKUP1"]
pub type EWUP1_W<'a, const O: u8> = crate::BitWriter<'a, u32, CR3_SPEC, bool, O>;
impl R {
#[doc = "Bit 15 - Enable internal wakeup line"]
#[inline(always)]
pub fn ewf(&self) -> EWF_R {
EWF_R::new(((self.bits >> 15) & 1) != 0)
}
#[doc = "Bit 10 - Apply pull-up and pull-down configuration"]
#[inline(always)]
pub fn apc(&self) -> APC_R {
APC_R::new(((self.bits >> 10) & 1) != 0)
}
#[doc = "Bit 8 - SRAM2 retention in Standby mode"]
#[inline(always)]
pub fn rrs(&self) -> RRS_R {
RRS_R::new(((self.bits >> 8) & 1) != 0)
}
#[doc = "Bit 4 - Enable Wakeup pin WKUP5"]
#[inline(always)]
pub fn ewup5(&self) -> EWUP5_R {
EWUP5_R::new(((self.bits >> 4) & 1) != 0)
}
#[doc = "Bit 3 - Enable Wakeup pin WKUP4"]
#[inline(always)]
pub fn ewup4(&self) -> EWUP4_R {
EWUP4_R::new(((self.bits >> 3) & 1) != 0)
}
#[doc = "Bit 2 - Enable Wakeup pin WKUP3"]
#[inline(always)]
pub fn ewup3(&self) -> EWUP3_R {
EWUP3_R::new(((self.bits >> 2) & 1) != 0)
}
#[doc = "Bit 1 - Enable Wakeup pin WKUP2"]
#[inline(always)]
pub fn ewup2(&self) -> EWUP2_R {
EWUP2_R::new(((self.bits >> 1) & 1) != 0)
}
#[doc = "Bit 0 - Enable Wakeup pin WKUP1"]
#[inline(always)]
pub fn ewup1(&self) -> EWUP1_R {
EWUP1_R::new((self.bits & 1) != 0)
}
}
impl W {
#[doc = "Bit 15 - Enable internal wakeup line"]
#[inline(always)]
pub fn ewf(&mut self) -> EWF_W<15> {
EWF_W::new(self)
}
#[doc = "Bit 10 - Apply pull-up and pull-down configuration"]
#[inline(always)]
pub fn apc(&mut self) -> APC_W<10> {
APC_W::new(self)
}
#[doc = "Bit 8 - SRAM2 retention in Standby mode"]
#[inline(always)]
pub fn rrs(&mut self) -> RRS_W<8> {
RRS_W::new(self)
}
#[doc = "Bit 4 - Enable Wakeup pin WKUP5"]
#[inline(always)]
pub fn ewup5(&mut self) -> EWUP5_W<4> {
EWUP5_W::new(self)
}
#[doc = "Bit 3 - Enable Wakeup pin WKUP4"]
#[inline(always)]
pub fn ewup4(&mut self) -> EWUP4_W<3> {
EWUP4_W::new(self)
}
#[doc = "Bit 2 - Enable Wakeup pin WKUP3"]
#[inline(always)]
pub fn ewup3(&mut self) -> EWUP3_W<2> {
EWUP3_W::new(self)
}
#[doc = "Bit 1 - Enable Wakeup pin WKUP2"]
#[inline(always)]
pub fn ewup2(&mut self) -> EWUP2_W<1> {
EWUP2_W::new(self)
}
#[doc = "Bit 0 - Enable Wakeup pin WKUP1"]
#[inline(always)]
pub fn ewup1(&mut self) -> EWUP1_W<0> {
EWUP1_W::new(self)
}
#[doc = "Writes raw bits to the register."]
#[inline(always)]
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
self.0.bits(bits);
self
}
}
#[doc = "Power control register 3\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [cr3](index.html) module"]
pub struct CR3_SPEC;
impl crate::RegisterSpec for CR3_SPEC {
type Ux = u32;
}
#[doc = "`read()` method returns [cr3::R](R) reader structure"]
impl crate::Readable for CR3_SPEC {
type Reader = R;
}
#[doc = "`write(|w| ..)` method takes [cr3::W](W) writer structure"]
impl crate::Writable for CR3_SPEC {
type Writer = W;
}
#[doc = "`reset()` method sets CR3 to value 0x8000"]
impl crate::Resettable for CR3_SPEC {
#[inline(always)]
fn reset_value() -> Self::Ux {
0x8000
}
}