stm32h7 0.16.0

Device support crates for STM32H7 devices
Documentation 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42

///Register `BKP%sR` reader
pub type R = crate::R<BKPRrs>;
///Register `BKP%sR` writer
pub type W = crate::W<BKPRrs>;
///Field `BKP` reader - The application can write or read data to and from these registers. They are powered-on by VBAT when VDD is switched off, so that they are not reset by System reset, and their contents remain valid when the device operates in low-power mode. In the default configuration this register is reset on a tamper detection event. It is forced to reset value as long as there is at least one internal or external tamper flag being set. This register is also reset when the readout protection (RDP) is disabled.
pub type BKP_R = crate::FieldReader<u32>;
///Field `BKP` writer - The application can write or read data to and from these registers. They are powered-on by VBAT when VDD is switched off, so that they are not reset by System reset, and their contents remain valid when the device operates in low-power mode. In the default configuration this register is reset on a tamper detection event. It is forced to reset value as long as there is at least one internal or external tamper flag being set. This register is also reset when the readout protection (RDP) is disabled.
pub type BKP_W<'a, REG> = crate::FieldWriter<'a, REG, 32, u32>;
impl R {
    ///Bits 0:31 - The application can write or read data to and from these registers. They are powered-on by VBAT when VDD is switched off, so that they are not reset by System reset, and their contents remain valid when the device operates in low-power mode. In the default configuration this register is reset on a tamper detection event. It is forced to reset value as long as there is at least one internal or external tamper flag being set. This register is also reset when the readout protection (RDP) is disabled.
    #[inline(always)]
    pub fn bkp(&self) -> BKP_R {
        BKP_R::new(self.bits)
    }
}
impl core::fmt::Debug for R {
    fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
        f.debug_struct("BKPR").field("bkp", &self.bkp()).finish()
    }
}
impl W {
    ///Bits 0:31 - The application can write or read data to and from these registers. They are powered-on by VBAT when VDD is switched off, so that they are not reset by System reset, and their contents remain valid when the device operates in low-power mode. In the default configuration this register is reset on a tamper detection event. It is forced to reset value as long as there is at least one internal or external tamper flag being set. This register is also reset when the readout protection (RDP) is disabled.
    #[inline(always)]
    pub fn bkp(&mut self) -> BKP_W<BKPRrs> {
        BKP_W::new(self, 0)
    }
}
/**TAMP backup %s register

You can [`read`](crate::Reg::read) this register and get [`bkpr::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`bkpr::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).*/
pub struct BKPRrs;
impl crate::RegisterSpec for BKPRrs {
    type Ux = u32;
}
///`read()` method returns [`bkpr::R`](R) reader structure
impl crate::Readable for BKPRrs {}
///`write(|w| ..)` method takes [`bkpr::W`](W) writer structure
impl crate::Writable for BKPRrs {
    type Safety = crate::Unsafe;
}
///`reset()` method sets BKP%sR to value 0
impl crate::Resettable for BKPRrs {}