stm32h7 0.16.0

Device support crates for STM32H7 devices
Documentation 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221

///Register `CALR` reader
pub type R = crate::R<CALRrs>;
///Register `CALR` writer
pub type W = crate::W<CALRrs>;
///Field `CALM` reader - Calibration minus The frequency of the calendar is reduced by masking CALM out of 220 RTCCLK pulses (32 seconds if the input frequency is 32768Â Hz). This decreases the frequency of the calendar with a resolution of 0.9537Â ppm. To increase the frequency of the calendar, this feature should be used in conjunction with CALP. See .
pub type CALM_R = crate::FieldReader<u16>;
///Field `CALM` writer - Calibration minus The frequency of the calendar is reduced by masking CALM out of 220 RTCCLK pulses (32 seconds if the input frequency is 32768Â Hz). This decreases the frequency of the calendar with a resolution of 0.9537Â ppm. To increase the frequency of the calendar, this feature should be used in conjunction with CALP. See .
pub type CALM_W<'a, REG> = crate::FieldWriter<'a, REG, 9, u16, crate::Safe>;
/**Use a 16-second calibration cycle period When CALW16 is set to 1, the 16-second calibration cycle period is selected. This bit must not be set to 1 if CALW8 = 1. Note: CALM\[0\] is stuck at 0 when CALW16 = 1. Refer to calibration.

Value on reset: 0*/
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
pub enum CALW16 {
    ///1: When CALW16 is set to ‘1’, the 16-second calibration cycle period is selected.This bit must not be set to ‘1’ if CALW8=1
    SixteenSeconds = 1,
}
impl From<CALW16> for bool {
    #[inline(always)]
    fn from(variant: CALW16) -> Self {
        variant as u8 != 0
    }
}
///Field `CALW16` reader - Use a 16-second calibration cycle period When CALW16 is set to 1, the 16-second calibration cycle period is selected. This bit must not be set to 1 if CALW8 = 1. Note: CALM\[0\] is stuck at 0 when CALW16 = 1. Refer to calibration.
pub type CALW16_R = crate::BitReader<CALW16>;
impl CALW16_R {
    ///Get enumerated values variant
    #[inline(always)]
    pub const fn variant(&self) -> Option<CALW16> {
        match self.bits {
            true => Some(CALW16::SixteenSeconds),
            _ => None,
        }
    }
    ///When CALW16 is set to ‘1’, the 16-second calibration cycle period is selected.This bit must not be set to ‘1’ if CALW8=1
    #[inline(always)]
    pub fn is_sixteen_seconds(&self) -> bool {
        *self == CALW16::SixteenSeconds
    }
}
///Field `CALW16` writer - Use a 16-second calibration cycle period When CALW16 is set to 1, the 16-second calibration cycle period is selected. This bit must not be set to 1 if CALW8 = 1. Note: CALM\[0\] is stuck at 0 when CALW16 = 1. Refer to calibration.
pub type CALW16_W<'a, REG> = crate::BitWriter<'a, REG, CALW16>;
impl<'a, REG> CALW16_W<'a, REG>
where
    REG: crate::Writable + crate::RegisterSpec,
{
    ///When CALW16 is set to ‘1’, the 16-second calibration cycle period is selected.This bit must not be set to ‘1’ if CALW8=1
    #[inline(always)]
    pub fn sixteen_seconds(self) -> &'a mut crate::W<REG> {
        self.variant(CALW16::SixteenSeconds)
    }
}
/**Use an 8-second calibration cycle period When CALW8 is set to 1, the 8-second calibration cycle period is selected. Note: CALM\[1:0\] are stuck at 00 when CALW8 = 1. Refer to digital calibration.

Value on reset: 0*/
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
pub enum CALW8 {
    ///1: When CALW8 is set to ‘1’, the 8-second calibration cycle period is selected
    EightSeconds = 1,
}
impl From<CALW8> for bool {
    #[inline(always)]
    fn from(variant: CALW8) -> Self {
        variant as u8 != 0
    }
}
///Field `CALW8` reader - Use an 8-second calibration cycle period When CALW8 is set to 1, the 8-second calibration cycle period is selected. Note: CALM\[1:0\] are stuck at 00 when CALW8 = 1. Refer to digital calibration.
pub type CALW8_R = crate::BitReader<CALW8>;
impl CALW8_R {
    ///Get enumerated values variant
    #[inline(always)]
    pub const fn variant(&self) -> Option<CALW8> {
        match self.bits {
            true => Some(CALW8::EightSeconds),
            _ => None,
        }
    }
    ///When CALW8 is set to ‘1’, the 8-second calibration cycle period is selected
    #[inline(always)]
    pub fn is_eight_seconds(&self) -> bool {
        *self == CALW8::EightSeconds
    }
}
///Field `CALW8` writer - Use an 8-second calibration cycle period When CALW8 is set to 1, the 8-second calibration cycle period is selected. Note: CALM\[1:0\] are stuck at 00 when CALW8 = 1. Refer to digital calibration.
pub type CALW8_W<'a, REG> = crate::BitWriter<'a, REG, CALW8>;
impl<'a, REG> CALW8_W<'a, REG>
where
    REG: crate::Writable + crate::RegisterSpec,
{
    ///When CALW8 is set to ‘1’, the 8-second calibration cycle period is selected
    #[inline(always)]
    pub fn eight_seconds(self) -> &'a mut crate::W<REG> {
        self.variant(CALW8::EightSeconds)
    }
}
/**Increase frequency of RTC by 488.5 ppm This feature is intended to be used in conjunction with CALM, which lowers the frequency of the calendar with a fine resolution. if the input frequency is 32768 Hz, the number of RTCCLK pulses added during a 32-second window is calculated as follows: (512 × CALP) - CALM. Refer to .

Value on reset: 0*/
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
pub enum CALP {
    ///0: No RTCCLK pulses are added
    NoChange = 0,
    ///1: One RTCCLK pulse is effectively inserted every 2^11 pulses (frequency increased by 488.5 ppm)
    IncreaseFreq = 1,
}
impl From<CALP> for bool {
    #[inline(always)]
    fn from(variant: CALP) -> Self {
        variant as u8 != 0
    }
}
///Field `CALP` reader - Increase frequency of RTC by 488.5 ppm This feature is intended to be used in conjunction with CALM, which lowers the frequency of the calendar with a fine resolution. if the input frequency is 32768 Hz, the number of RTCCLK pulses added during a 32-second window is calculated as follows: (512 × CALP) - CALM. Refer to .
pub type CALP_R = crate::BitReader<CALP>;
impl CALP_R {
    ///Get enumerated values variant
    #[inline(always)]
    pub const fn variant(&self) -> CALP {
        match self.bits {
            false => CALP::NoChange,
            true => CALP::IncreaseFreq,
        }
    }
    ///No RTCCLK pulses are added
    #[inline(always)]
    pub fn is_no_change(&self) -> bool {
        *self == CALP::NoChange
    }
    ///One RTCCLK pulse is effectively inserted every 2^11 pulses (frequency increased by 488.5 ppm)
    #[inline(always)]
    pub fn is_increase_freq(&self) -> bool {
        *self == CALP::IncreaseFreq
    }
}
///Field `CALP` writer - Increase frequency of RTC by 488.5 ppm This feature is intended to be used in conjunction with CALM, which lowers the frequency of the calendar with a fine resolution. if the input frequency is 32768 Hz, the number of RTCCLK pulses added during a 32-second window is calculated as follows: (512 × CALP) - CALM. Refer to .
pub type CALP_W<'a, REG> = crate::BitWriter<'a, REG, CALP>;
impl<'a, REG> CALP_W<'a, REG>
where
    REG: crate::Writable + crate::RegisterSpec,
{
    ///No RTCCLK pulses are added
    #[inline(always)]
    pub fn no_change(self) -> &'a mut crate::W<REG> {
        self.variant(CALP::NoChange)
    }
    ///One RTCCLK pulse is effectively inserted every 2^11 pulses (frequency increased by 488.5 ppm)
    #[inline(always)]
    pub fn increase_freq(self) -> &'a mut crate::W<REG> {
        self.variant(CALP::IncreaseFreq)
    }
}
impl R {
    ///Bits 0:8 - Calibration minus The frequency of the calendar is reduced by masking CALM out of 220 RTCCLK pulses (32 seconds if the input frequency is 32768Â Hz). This decreases the frequency of the calendar with a resolution of 0.9537Â ppm. To increase the frequency of the calendar, this feature should be used in conjunction with CALP. See .
    #[inline(always)]
    pub fn calm(&self) -> CALM_R {
        CALM_R::new((self.bits & 0x01ff) as u16)
    }
    ///Bit 13 - Use a 16-second calibration cycle period When CALW16 is set to 1, the 16-second calibration cycle period is selected. This bit must not be set to 1 if CALW8 = 1. Note: CALM\[0\] is stuck at 0 when CALW16 = 1. Refer to calibration.
    #[inline(always)]
    pub fn calw16(&self) -> CALW16_R {
        CALW16_R::new(((self.bits >> 13) & 1) != 0)
    }
    ///Bit 14 - Use an 8-second calibration cycle period When CALW8 is set to 1, the 8-second calibration cycle period is selected. Note: CALM\[1:0\] are stuck at 00 when CALW8 = 1. Refer to digital calibration.
    #[inline(always)]
    pub fn calw8(&self) -> CALW8_R {
        CALW8_R::new(((self.bits >> 14) & 1) != 0)
    }
    ///Bit 15 - Increase frequency of RTC by 488.5 ppm This feature is intended to be used in conjunction with CALM, which lowers the frequency of the calendar with a fine resolution. if the input frequency is 32768 Hz, the number of RTCCLK pulses added during a 32-second window is calculated as follows: (512 × CALP) - CALM. Refer to .
    #[inline(always)]
    pub fn calp(&self) -> CALP_R {
        CALP_R::new(((self.bits >> 15) & 1) != 0)
    }
}
impl core::fmt::Debug for R {
    fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
        f.debug_struct("CALR")
            .field("calm", &self.calm())
            .field("calw16", &self.calw16())
            .field("calw8", &self.calw8())
            .field("calp", &self.calp())
            .finish()
    }
}
impl W {
    ///Bits 0:8 - Calibration minus The frequency of the calendar is reduced by masking CALM out of 220 RTCCLK pulses (32 seconds if the input frequency is 32768Â Hz). This decreases the frequency of the calendar with a resolution of 0.9537Â ppm. To increase the frequency of the calendar, this feature should be used in conjunction with CALP. See .
    #[inline(always)]
    pub fn calm(&mut self) -> CALM_W<CALRrs> {
        CALM_W::new(self, 0)
    }
    ///Bit 13 - Use a 16-second calibration cycle period When CALW16 is set to 1, the 16-second calibration cycle period is selected. This bit must not be set to 1 if CALW8 = 1. Note: CALM\[0\] is stuck at 0 when CALW16 = 1. Refer to calibration.
    #[inline(always)]
    pub fn calw16(&mut self) -> CALW16_W<CALRrs> {
        CALW16_W::new(self, 13)
    }
    ///Bit 14 - Use an 8-second calibration cycle period When CALW8 is set to 1, the 8-second calibration cycle period is selected. Note: CALM\[1:0\] are stuck at 00 when CALW8 = 1. Refer to digital calibration.
    #[inline(always)]
    pub fn calw8(&mut self) -> CALW8_W<CALRrs> {
        CALW8_W::new(self, 14)
    }
    ///Bit 15 - Increase frequency of RTC by 488.5 ppm This feature is intended to be used in conjunction with CALM, which lowers the frequency of the calendar with a fine resolution. if the input frequency is 32768 Hz, the number of RTCCLK pulses added during a 32-second window is calculated as follows: (512 × CALP) - CALM. Refer to .
    #[inline(always)]
    pub fn calp(&mut self) -> CALP_W<CALRrs> {
        CALP_W::new(self, 15)
    }
}
/**RTC calibration register

You can [`read`](crate::Reg::read) this register and get [`calr::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`calr::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).*/
pub struct CALRrs;
impl crate::RegisterSpec for CALRrs {
    type Ux = u32;
}
///`read()` method returns [`calr::R`](R) reader structure
impl crate::Readable for CALRrs {}
///`write(|w| ..)` method takes [`calr::W`](W) writer structure
impl crate::Writable for CALRrs {
    type Safety = crate::Unsafe;
}
///`reset()` method sets CALR to value 0
impl crate::Resettable for CALRrs {}