stm32h7 0.16.0

Device support crates for STM32H7 devices
Documentation 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104

///Register `SADCFGR` reader
pub type R = crate::R<SADCFGRrs>;
///Register `SADCFGR` writer
pub type W = crate::W<SADCFGRrs>;
///Field `SNTHR` reader - Signal to noise threshold This field is set and cleared by software. It is used to define THR<sub>H </sub>(and THR<sub>L</sub> if hysteresis is enabled). See Table 419 for details. others: Reserved Note: This field can be write-protected (see Section 46.4.13: Register protection for details).
pub type SNTHR_R = crate::FieldReader;
///Field `SNTHR` writer - Signal to noise threshold This field is set and cleared by software. It is used to define THR<sub>H </sub>(and THR<sub>L</sub> if hysteresis is enabled). See Table 419 for details. others: Reserved Note: This field can be write-protected (see Section 46.4.13: Register protection for details).
pub type SNTHR_W<'a, REG> = crate::FieldWriter<'a, REG, 4>;
///Field `ANSLP` reader - Ambient noise slope control This field is set and cleared by software. It is used to define the positive and negative slope of the noise estimator, in charge of updating the ANLVL (see Ambient noise estimation (ANLVL) for information about programming this field). Note: This field can be write-protected (see Section 46.4.13: Register protection for details).
pub type ANSLP_R = crate::FieldReader;
///Field `ANSLP` writer - Ambient noise slope control This field is set and cleared by software. It is used to define the positive and negative slope of the noise estimator, in charge of updating the ANLVL (see Ambient noise estimation (ANLVL) for information about programming this field). Note: This field can be write-protected (see Section 46.4.13: Register protection for details).
pub type ANSLP_W<'a, REG> = crate::FieldWriter<'a, REG, 3>;
///Field `LFRNB` reader - Number of learning frames This field is set and cleared by software. It is used to define the number of learning frames to perform the first estimate of the noise level. 1xx: 32 frames used to compute the initial noise level Note: This field can be write-protected (see Section 46.4.13: Register protection for details).
pub type LFRNB_R = crate::FieldReader;
///Field `LFRNB` writer - Number of learning frames This field is set and cleared by software. It is used to define the number of learning frames to perform the first estimate of the noise level. 1xx: 32 frames used to compute the initial noise level Note: This field can be write-protected (see Section 46.4.13: Register protection for details).
pub type LFRNB_W<'a, REG> = crate::FieldWriter<'a, REG, 3>;
///Field `HGOVR` reader - Hangover time window This field is set and cleared by software. Once the SAD state is DETECT, this parameter is used to define the amount of time the sound is allowed to remain below the threshold, before switching the SAD to MONITOR state (see FRSIZE field for the description of a frame). Note: This field can be write-protected (see Section 46.4.13: Register protection for details).
pub type HGOVR_R = crate::FieldReader;
///Field `HGOVR` writer - Hangover time window This field is set and cleared by software. Once the SAD state is DETECT, this parameter is used to define the amount of time the sound is allowed to remain below the threshold, before switching the SAD to MONITOR state (see FRSIZE field for the description of a frame). Note: This field can be write-protected (see Section 46.4.13: Register protection for details).
pub type HGOVR_W<'a, REG> = crate::FieldWriter<'a, REG, 3>;
///Field `ANMIN` reader - Minimum noise level This field is set and cleared by software. It is used to define the minimum noise level and then the sensitivity. It represents a positive number. Note: This field can be write-protected (see Section 46.4.13: Register protection for details).
pub type ANMIN_R = crate::FieldReader<u16>;
///Field `ANMIN` writer - Minimum noise level This field is set and cleared by software. It is used to define the minimum noise level and then the sensitivity. It represents a positive number. Note: This field can be write-protected (see Section 46.4.13: Register protection for details).
pub type ANMIN_W<'a, REG> = crate::FieldWriter<'a, REG, 13, u16>;
impl R {
    ///Bits 0:3 - Signal to noise threshold This field is set and cleared by software. It is used to define THR<sub>H </sub>(and THR<sub>L</sub> if hysteresis is enabled). See Table 419 for details. others: Reserved Note: This field can be write-protected (see Section 46.4.13: Register protection for details).
    #[inline(always)]
    pub fn snthr(&self) -> SNTHR_R {
        SNTHR_R::new((self.bits & 0x0f) as u8)
    }
    ///Bits 4:6 - Ambient noise slope control This field is set and cleared by software. It is used to define the positive and negative slope of the noise estimator, in charge of updating the ANLVL (see Ambient noise estimation (ANLVL) for information about programming this field). Note: This field can be write-protected (see Section 46.4.13: Register protection for details).
    #[inline(always)]
    pub fn anslp(&self) -> ANSLP_R {
        ANSLP_R::new(((self.bits >> 4) & 7) as u8)
    }
    ///Bits 8:10 - Number of learning frames This field is set and cleared by software. It is used to define the number of learning frames to perform the first estimate of the noise level. 1xx: 32 frames used to compute the initial noise level Note: This field can be write-protected (see Section 46.4.13: Register protection for details).
    #[inline(always)]
    pub fn lfrnb(&self) -> LFRNB_R {
        LFRNB_R::new(((self.bits >> 8) & 7) as u8)
    }
    ///Bits 12:14 - Hangover time window This field is set and cleared by software. Once the SAD state is DETECT, this parameter is used to define the amount of time the sound is allowed to remain below the threshold, before switching the SAD to MONITOR state (see FRSIZE field for the description of a frame). Note: This field can be write-protected (see Section 46.4.13: Register protection for details).
    #[inline(always)]
    pub fn hgovr(&self) -> HGOVR_R {
        HGOVR_R::new(((self.bits >> 12) & 7) as u8)
    }
    ///Bits 16:28 - Minimum noise level This field is set and cleared by software. It is used to define the minimum noise level and then the sensitivity. It represents a positive number. Note: This field can be write-protected (see Section 46.4.13: Register protection for details).
    #[inline(always)]
    pub fn anmin(&self) -> ANMIN_R {
        ANMIN_R::new(((self.bits >> 16) & 0x1fff) as u16)
    }
}
impl core::fmt::Debug for R {
    fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
        f.debug_struct("SADCFGR")
            .field("snthr", &self.snthr())
            .field("anslp", &self.anslp())
            .field("lfrnb", &self.lfrnb())
            .field("hgovr", &self.hgovr())
            .field("anmin", &self.anmin())
            .finish()
    }
}
impl W {
    ///Bits 0:3 - Signal to noise threshold This field is set and cleared by software. It is used to define THR<sub>H </sub>(and THR<sub>L</sub> if hysteresis is enabled). See Table 419 for details. others: Reserved Note: This field can be write-protected (see Section 46.4.13: Register protection for details).
    #[inline(always)]
    pub fn snthr(&mut self) -> SNTHR_W<SADCFGRrs> {
        SNTHR_W::new(self, 0)
    }
    ///Bits 4:6 - Ambient noise slope control This field is set and cleared by software. It is used to define the positive and negative slope of the noise estimator, in charge of updating the ANLVL (see Ambient noise estimation (ANLVL) for information about programming this field). Note: This field can be write-protected (see Section 46.4.13: Register protection for details).
    #[inline(always)]
    pub fn anslp(&mut self) -> ANSLP_W<SADCFGRrs> {
        ANSLP_W::new(self, 4)
    }
    ///Bits 8:10 - Number of learning frames This field is set and cleared by software. It is used to define the number of learning frames to perform the first estimate of the noise level. 1xx: 32 frames used to compute the initial noise level Note: This field can be write-protected (see Section 46.4.13: Register protection for details).
    #[inline(always)]
    pub fn lfrnb(&mut self) -> LFRNB_W<SADCFGRrs> {
        LFRNB_W::new(self, 8)
    }
    ///Bits 12:14 - Hangover time window This field is set and cleared by software. Once the SAD state is DETECT, this parameter is used to define the amount of time the sound is allowed to remain below the threshold, before switching the SAD to MONITOR state (see FRSIZE field for the description of a frame). Note: This field can be write-protected (see Section 46.4.13: Register protection for details).
    #[inline(always)]
    pub fn hgovr(&mut self) -> HGOVR_W<SADCFGRrs> {
        HGOVR_W::new(self, 12)
    }
    ///Bits 16:28 - Minimum noise level This field is set and cleared by software. It is used to define the minimum noise level and then the sensitivity. It represents a positive number. Note: This field can be write-protected (see Section 46.4.13: Register protection for details).
    #[inline(always)]
    pub fn anmin(&mut self) -> ANMIN_W<SADCFGRrs> {
        ANMIN_W::new(self, 16)
    }
}
/**ADF SAD configuration register

You can [`read`](crate::Reg::read) this register and get [`sadcfgr::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`sadcfgr::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).*/
pub struct SADCFGRrs;
impl crate::RegisterSpec for SADCFGRrs {
    type Ux = u32;
}
///`read()` method returns [`sadcfgr::R`](R) reader structure
impl crate::Readable for SADCFGRrs {}
///`write(|w| ..)` method takes [`sadcfgr::W`](W) writer structure
impl crate::Writable for SADCFGRrs {
    type Safety = crate::Unsafe;
}
///`reset()` method sets SADCFGR to value 0
impl crate::Resettable for SADCFGRrs {}