#[doc = r" Value read from the register"]
pub struct R {
bits: u32,
}
#[doc = r" Value to write to the register"]
pub struct W {
bits: u32,
}
impl super::TIMINGR {
#[doc = r" Modifies the contents of the register"]
#[inline]
pub fn modify<F>(&self, f: F)
where
for<'w> F: FnOnce(&R, &'w mut W) -> &'w mut W,
{
let bits = self.register.get();
let r = R { bits: bits };
let mut w = W { bits: bits };
f(&r, &mut w);
self.register.set(w.bits);
}
#[doc = r" Reads the contents of the register"]
#[inline]
pub fn read(&self) -> R {
R {
bits: self.register.get(),
}
}
#[doc = r" Writes to the register"]
#[inline]
pub fn write<F>(&self, f: F)
where
F: FnOnce(&mut W) -> &mut W,
{
let mut w = W::reset_value();
f(&mut w);
self.register.set(w.bits);
}
#[doc = r" Writes the reset value to the register"]
#[inline]
pub fn reset(&self) {
self.write(|w| w)
}
}
#[doc = r" Value of the field"]
pub struct SCLLR {
bits: u8,
}
impl SCLLR {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bits(&self) -> u8 {
self.bits
}
}
#[doc = r" Value of the field"]
pub struct SCLHR {
bits: u8,
}
impl SCLHR {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bits(&self) -> u8 {
self.bits
}
}
#[doc = r" Value of the field"]
pub struct SDADELR {
bits: u8,
}
impl SDADELR {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bits(&self) -> u8 {
self.bits
}
}
#[doc = r" Value of the field"]
pub struct SCLDELR {
bits: u8,
}
impl SCLDELR {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bits(&self) -> u8 {
self.bits
}
}
#[doc = r" Value of the field"]
pub struct PRESCR {
bits: u8,
}
impl PRESCR {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bits(&self) -> u8 {
self.bits
}
}
#[doc = r" Proxy"]
pub struct _SCLLW<'a> {
w: &'a mut W,
}
impl<'a> _SCLLW<'a> {
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bits(self, value: u8) -> &'a mut W {
const MASK: u8 = 255;
const OFFSET: u8 = 0;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _SCLHW<'a> {
w: &'a mut W,
}
impl<'a> _SCLHW<'a> {
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bits(self, value: u8) -> &'a mut W {
const MASK: u8 = 255;
const OFFSET: u8 = 8;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _SDADELW<'a> {
w: &'a mut W,
}
impl<'a> _SDADELW<'a> {
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bits(self, value: u8) -> &'a mut W {
const MASK: u8 = 15;
const OFFSET: u8 = 16;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _SCLDELW<'a> {
w: &'a mut W,
}
impl<'a> _SCLDELW<'a> {
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bits(self, value: u8) -> &'a mut W {
const MASK: u8 = 15;
const OFFSET: u8 = 20;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _PRESCW<'a> {
w: &'a mut W,
}
impl<'a> _PRESCW<'a> {
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bits(self, value: u8) -> &'a mut W {
const MASK: u8 = 15;
const OFFSET: u8 = 28;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
impl R {
#[doc = r" Value of the register as raw bits"]
#[inline]
pub fn bits(&self) -> u32 {
self.bits
}
#[doc = "Bits 0:7 - SCL low period (master mode) This field is used to generate the SCL low period in master mode. tSCLL = (SCLL+1) x tPRESC Note: SCLL is also used to generate tBUF and tSU:STA timings."]
#[inline]
pub fn scll(&self) -> SCLLR {
let bits = {
const MASK: u8 = 255;
const OFFSET: u8 = 0;
((self.bits >> OFFSET) & MASK as u32) as u8
};
SCLLR { bits }
}
#[doc = "Bits 8:15 - SCL high period (master mode) This field is used to generate the SCL high period in master mode. tSCLH = (SCLH+1) x tPRESC Note: SCLH is also used to generate tSU:STO and tHD:STA timing."]
#[inline]
pub fn sclh(&self) -> SCLHR {
let bits = {
const MASK: u8 = 255;
const OFFSET: u8 = 8;
((self.bits >> OFFSET) & MASK as u32) as u8
};
SCLHR { bits }
}
#[doc = "Bits 16:19 - Data hold time This field is used to generate the delay tSDADEL between SCL falling edge and SDA edge. In master mode and in slave mode with NOSTRETCH = 0, the SCL line is stretched low during tSDADEL. tSDADEL= SDADEL x tPRESC Note: SDADEL is used to generate tHD:DAT timing."]
#[inline]
pub fn sdadel(&self) -> SDADELR {
let bits = {
const MASK: u8 = 15;
const OFFSET: u8 = 16;
((self.bits >> OFFSET) & MASK as u32) as u8
};
SDADELR { bits }
}
#[doc = "Bits 20:23 - Data setup time This field is used to generate a delay tSCLDEL between SDA edge and SCL rising edge. In master mode and in slave mode with NOSTRETCH = 0, the SCL line is stretched low during tSCLDEL. tSCLDEL = (SCLDEL+1) x tPRESC Note: tSCLDEL is used to generate tSU:DAT timing."]
#[inline]
pub fn scldel(&self) -> SCLDELR {
let bits = {
const MASK: u8 = 15;
const OFFSET: u8 = 20;
((self.bits >> OFFSET) & MASK as u32) as u8
};
SCLDELR { bits }
}
#[doc = "Bits 28:31 - Timing prescaler This field is used to prescale I2CCLK in order to generate the clock period tPRESC used for data setup and hold counters (refer to I2C timings on page9) and for SCL high and low level counters (refer to I2C master initialization on page24). tPRESC = (PRESC+1) x tI2CCLK"]
#[inline]
pub fn presc(&self) -> PRESCR {
let bits = {
const MASK: u8 = 15;
const OFFSET: u8 = 28;
((self.bits >> OFFSET) & MASK as u32) as u8
};
PRESCR { bits }
}
}
impl W {
#[doc = r" Reset value of the register"]
#[inline]
pub fn reset_value() -> W {
W { bits: 0 }
}
#[doc = r" Writes raw bits to the register"]
#[inline]
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
self.bits = bits;
self
}
#[doc = "Bits 0:7 - SCL low period (master mode) This field is used to generate the SCL low period in master mode. tSCLL = (SCLL+1) x tPRESC Note: SCLL is also used to generate tBUF and tSU:STA timings."]
#[inline]
pub fn scll(&mut self) -> _SCLLW {
_SCLLW { w: self }
}
#[doc = "Bits 8:15 - SCL high period (master mode) This field is used to generate the SCL high period in master mode. tSCLH = (SCLH+1) x tPRESC Note: SCLH is also used to generate tSU:STO and tHD:STA timing."]
#[inline]
pub fn sclh(&mut self) -> _SCLHW {
_SCLHW { w: self }
}
#[doc = "Bits 16:19 - Data hold time This field is used to generate the delay tSDADEL between SCL falling edge and SDA edge. In master mode and in slave mode with NOSTRETCH = 0, the SCL line is stretched low during tSDADEL. tSDADEL= SDADEL x tPRESC Note: SDADEL is used to generate tHD:DAT timing."]
#[inline]
pub fn sdadel(&mut self) -> _SDADELW {
_SDADELW { w: self }
}
#[doc = "Bits 20:23 - Data setup time This field is used to generate a delay tSCLDEL between SDA edge and SCL rising edge. In master mode and in slave mode with NOSTRETCH = 0, the SCL line is stretched low during tSCLDEL. tSCLDEL = (SCLDEL+1) x tPRESC Note: tSCLDEL is used to generate tSU:DAT timing."]
#[inline]
pub fn scldel(&mut self) -> _SCLDELW {
_SCLDELW { w: self }
}
#[doc = "Bits 28:31 - Timing prescaler This field is used to prescale I2CCLK in order to generate the clock period tPRESC used for data setup and hold counters (refer to I2C timings on page9) and for SCL high and low level counters (refer to I2C master initialization on page24). tPRESC = (PRESC+1) x tI2CCLK"]
#[inline]
pub fn presc(&mut self) -> _PRESCW {
_PRESCW { w: self }
}
}