#[doc = r" Value read from the register"]
pub struct R {
bits: u32,
}
#[doc = r" Value to write to the register"]
pub struct W {
bits: u32,
}
impl super::FMC_PMEM {
#[doc = r" Modifies the contents of the register"]
#[inline]
pub fn modify<F>(&self, f: F)
where
for<'w> F: FnOnce(&R, &'w mut W) -> &'w mut W,
{
let bits = self.register.get();
let r = R { bits: bits };
let mut w = W { bits: bits };
f(&r, &mut w);
self.register.set(w.bits);
}
#[doc = r" Reads the contents of the register"]
#[inline]
pub fn read(&self) -> R {
R {
bits: self.register.get(),
}
}
#[doc = r" Writes to the register"]
#[inline]
pub fn write<F>(&self, f: F)
where
F: FnOnce(&mut W) -> &mut W,
{
let mut w = W::reset_value();
f(&mut w);
self.register.set(w.bits);
}
#[doc = r" Writes the reset value to the register"]
#[inline]
pub fn reset(&self) {
self.write(|w| w)
}
}
#[doc = r" Value of the field"]
pub struct MEMSETR {
bits: u8,
}
impl MEMSETR {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bits(&self) -> u8 {
self.bits
}
}
#[doc = r" Value of the field"]
pub struct MEMWAITR {
bits: u8,
}
impl MEMWAITR {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bits(&self) -> u8 {
self.bits
}
}
#[doc = r" Value of the field"]
pub struct MEMHOLDR {
bits: u8,
}
impl MEMHOLDR {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bits(&self) -> u8 {
self.bits
}
}
#[doc = r" Value of the field"]
pub struct MEMHIZR {
bits: u8,
}
impl MEMHIZR {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bits(&self) -> u8 {
self.bits
}
}
#[doc = r" Proxy"]
pub struct _MEMSETW<'a> {
w: &'a mut W,
}
impl<'a> _MEMSETW<'a> {
#[doc = r" Writes raw bits to the field"]
#[inline]
pub unsafe fn bits(self, value: u8) -> &'a mut W {
const MASK: u8 = 255;
const OFFSET: u8 = 0;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _MEMWAITW<'a> {
w: &'a mut W,
}
impl<'a> _MEMWAITW<'a> {
#[doc = r" Writes raw bits to the field"]
#[inline]
pub unsafe fn bits(self, value: u8) -> &'a mut W {
const MASK: u8 = 255;
const OFFSET: u8 = 8;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _MEMHOLDW<'a> {
w: &'a mut W,
}
impl<'a> _MEMHOLDW<'a> {
#[doc = r" Writes raw bits to the field"]
#[inline]
pub unsafe fn bits(self, value: u8) -> &'a mut W {
const MASK: u8 = 255;
const OFFSET: u8 = 16;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _MEMHIZW<'a> {
w: &'a mut W,
}
impl<'a> _MEMHIZW<'a> {
#[doc = r" Writes raw bits to the field"]
#[inline]
pub unsafe fn bits(self, value: u8) -> &'a mut W {
const MASK: u8 = 255;
const OFFSET: u8 = 24;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
impl R {
#[doc = r" Value of the register as raw bits"]
#[inline]
pub fn bits(&self) -> u32 {
self.bits
}
#[doc = "Bits 0:7 - Common memory x setup time These bits define the number of KCK_FMC (+1) clock cycles to set up the address before the command assertion (NWE, NOE), for NAND Flash read or write access to common memory space:"]
#[inline]
pub fn memset(&self) -> MEMSETR {
let bits = {
const MASK: u8 = 255;
const OFFSET: u8 = 0;
((self.bits >> OFFSET) & MASK as u32) as u8
};
MEMSETR { bits }
}
#[doc = "Bits 8:15 - Common memory wait time These bits define the minimum number of KCK_FMC (+1) clock cycles to assert the command (NWE, NOE), for NAND Flash read or write access to common memory space. The duration of command assertion is extended if the wait signal (NWAIT) is active (low) at the end of the programmed value of KCK_FMC:"]
#[inline]
pub fn memwait(&self) -> MEMWAITR {
let bits = {
const MASK: u8 = 255;
const OFFSET: u8 = 8;
((self.bits >> OFFSET) & MASK as u32) as u8
};
MEMWAITR { bits }
}
#[doc = "Bits 16:23 - Common memory hold time These bits define the number of KCK_FMC clock cycles for write accesses and KCK_FMC+1 clock cycles for read accesses during which the address is held (and data for write accesses) after the command is de-asserted (NWE, NOE), for NAND Flash read or write access to common memory space:"]
#[inline]
pub fn memhold(&self) -> MEMHOLDR {
let bits = {
const MASK: u8 = 255;
const OFFSET: u8 = 16;
((self.bits >> OFFSET) & MASK as u32) as u8
};
MEMHOLDR { bits }
}
#[doc = "Bits 24:31 - Common memory x data bus Hi-Z time These bits define the number of KCK_FMC clock cycles during which the data bus is kept Hi-Z after the start of a NAND Flash write access to common memory space. This is only valid for write transactions:"]
#[inline]
pub fn memhiz(&self) -> MEMHIZR {
let bits = {
const MASK: u8 = 255;
const OFFSET: u8 = 24;
((self.bits >> OFFSET) & MASK as u32) as u8
};
MEMHIZR { bits }
}
}
impl W {
#[doc = r" Reset value of the register"]
#[inline]
pub fn reset_value() -> W {
W { bits: 4244438268 }
}
#[doc = r" Writes raw bits to the register"]
#[inline]
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
self.bits = bits;
self
}
#[doc = "Bits 0:7 - Common memory x setup time These bits define the number of KCK_FMC (+1) clock cycles to set up the address before the command assertion (NWE, NOE), for NAND Flash read or write access to common memory space:"]
#[inline]
pub fn memset(&mut self) -> _MEMSETW {
_MEMSETW { w: self }
}
#[doc = "Bits 8:15 - Common memory wait time These bits define the minimum number of KCK_FMC (+1) clock cycles to assert the command (NWE, NOE), for NAND Flash read or write access to common memory space. The duration of command assertion is extended if the wait signal (NWAIT) is active (low) at the end of the programmed value of KCK_FMC:"]
#[inline]
pub fn memwait(&mut self) -> _MEMWAITW {
_MEMWAITW { w: self }
}
#[doc = "Bits 16:23 - Common memory hold time These bits define the number of KCK_FMC clock cycles for write accesses and KCK_FMC+1 clock cycles for read accesses during which the address is held (and data for write accesses) after the command is de-asserted (NWE, NOE), for NAND Flash read or write access to common memory space:"]
#[inline]
pub fn memhold(&mut self) -> _MEMHOLDW {
_MEMHOLDW { w: self }
}
#[doc = "Bits 24:31 - Common memory x data bus Hi-Z time These bits define the number of KCK_FMC clock cycles during which the data bus is kept Hi-Z after the start of a NAND Flash write access to common memory space. This is only valid for write transactions:"]
#[inline]
pub fn memhiz(&mut self) -> _MEMHIZW {
_MEMHIZW { w: self }
}
}