#[doc = "Register `AHB4LPENR` reader"]
pub struct R(crate::R<AHB4LPENR_SPEC>);
impl core::ops::Deref for R {
type Target = crate::R<AHB4LPENR_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl From<crate::R<AHB4LPENR_SPEC>> for R {
#[inline(always)]
fn from(reader: crate::R<AHB4LPENR_SPEC>) -> Self {
R(reader)
}
}
#[doc = "Register `AHB4LPENR` writer"]
pub struct W(crate::W<AHB4LPENR_SPEC>);
impl core::ops::Deref for W {
type Target = crate::W<AHB4LPENR_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl core::ops::DerefMut for W {
#[inline(always)]
fn deref_mut(&mut self) -> &mut Self::Target {
&mut self.0
}
}
impl From<crate::W<AHB4LPENR_SPEC>> for W {
#[inline(always)]
fn from(writer: crate::W<AHB4LPENR_SPEC>) -> Self {
W(writer)
}
}
#[doc = "GPIO peripheral clock enable during CSleep mode\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum GPIOALPEN_A {
#[doc = "0: The selected clock is disabled during csleep mode"]
Disabled = 0,
#[doc = "1: The selected clock is enabled during csleep mode"]
Enabled = 1,
}
impl From<GPIOALPEN_A> for bool {
#[inline(always)]
fn from(variant: GPIOALPEN_A) -> Self {
variant as u8 != 0
}
}
#[doc = "Field `GPIOALPEN` reader - GPIO peripheral clock enable during CSleep mode"]
pub type GPIOALPEN_R = crate::BitReader<GPIOALPEN_A>;
impl GPIOALPEN_R {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> GPIOALPEN_A {
match self.bits {
false => GPIOALPEN_A::Disabled,
true => GPIOALPEN_A::Enabled,
}
}
#[doc = "Checks if the value of the field is `Disabled`"]
#[inline(always)]
pub fn is_disabled(&self) -> bool {
*self == GPIOALPEN_A::Disabled
}
#[doc = "Checks if the value of the field is `Enabled`"]
#[inline(always)]
pub fn is_enabled(&self) -> bool {
*self == GPIOALPEN_A::Enabled
}
}
#[doc = "Field `GPIOALPEN` writer - GPIO peripheral clock enable during CSleep mode"]
pub type GPIOALPEN_W<'a, const O: u8> = crate::BitWriter<'a, u32, AHB4LPENR_SPEC, GPIOALPEN_A, O>;
impl<'a, const O: u8> GPIOALPEN_W<'a, O> {
#[doc = "The selected clock is disabled during csleep mode"]
#[inline(always)]
pub fn disabled(self) -> &'a mut W {
self.variant(GPIOALPEN_A::Disabled)
}
#[doc = "The selected clock is enabled during csleep mode"]
#[inline(always)]
pub fn enabled(self) -> &'a mut W {
self.variant(GPIOALPEN_A::Enabled)
}
}
#[doc = "GPIO peripheral clock enable during CSleep mode"]
pub use GPIOALPEN_A as GPIOBLPEN_A;
#[doc = "GPIO peripheral clock enable during CSleep mode"]
pub use GPIOALPEN_A as GPIOCLPEN_A;
#[doc = "GPIO peripheral clock enable during CSleep mode"]
pub use GPIOALPEN_A as GPIODLPEN_A;
#[doc = "GPIO peripheral clock enable during CSleep mode"]
pub use GPIOALPEN_A as GPIOELPEN_A;
#[doc = "GPIO peripheral clock enable during CSleep mode"]
pub use GPIOALPEN_A as GPIOFLPEN_A;
#[doc = "GPIO peripheral clock enable during CSleep mode"]
pub use GPIOALPEN_A as GPIOGLPEN_A;
#[doc = "GPIO peripheral clock enable during CSleep mode"]
pub use GPIOALPEN_A as GPIOHLPEN_A;
#[doc = "GPIO peripheral clock enable during CSleep mode"]
pub use GPIOALPEN_A as GPIOILPEN_A;
#[doc = "GPIO peripheral clock enable during CSleep mode"]
pub use GPIOALPEN_A as GPIOJLPEN_A;
#[doc = "GPIO peripheral clock enable during CSleep mode"]
pub use GPIOALPEN_A as GPIOKLPEN_A;
#[doc = "CRC peripheral clock enable during CSleep mode"]
pub use GPIOALPEN_A as CRCLPEN_A;
#[doc = "BDMA Clock Enable During CSleep Mode"]
pub use GPIOALPEN_A as BDMALPEN_A;
#[doc = "ADC3 Peripheral Clocks Enable During CSleep Mode"]
pub use GPIOALPEN_A as ADC3LPEN_A;
#[doc = "Backup RAM Clock Enable During CSleep Mode"]
pub use GPIOALPEN_A as BKPRAMLPEN_A;
#[doc = "SRAM4 Clock Enable During CSleep Mode"]
pub use GPIOALPEN_A as SRAM4LPEN_A;
#[doc = "Field `GPIOBLPEN` reader - GPIO peripheral clock enable during CSleep mode"]
pub use GPIOALPEN_R as GPIOBLPEN_R;
#[doc = "Field `GPIOCLPEN` reader - GPIO peripheral clock enable during CSleep mode"]
pub use GPIOALPEN_R as GPIOCLPEN_R;
#[doc = "Field `GPIODLPEN` reader - GPIO peripheral clock enable during CSleep mode"]
pub use GPIOALPEN_R as GPIODLPEN_R;
#[doc = "Field `GPIOELPEN` reader - GPIO peripheral clock enable during CSleep mode"]
pub use GPIOALPEN_R as GPIOELPEN_R;
#[doc = "Field `GPIOFLPEN` reader - GPIO peripheral clock enable during CSleep mode"]
pub use GPIOALPEN_R as GPIOFLPEN_R;
#[doc = "Field `GPIOGLPEN` reader - GPIO peripheral clock enable during CSleep mode"]
pub use GPIOALPEN_R as GPIOGLPEN_R;
#[doc = "Field `GPIOHLPEN` reader - GPIO peripheral clock enable during CSleep mode"]
pub use GPIOALPEN_R as GPIOHLPEN_R;
#[doc = "Field `GPIOILPEN` reader - GPIO peripheral clock enable during CSleep mode"]
pub use GPIOALPEN_R as GPIOILPEN_R;
#[doc = "Field `GPIOJLPEN` reader - GPIO peripheral clock enable during CSleep mode"]
pub use GPIOALPEN_R as GPIOJLPEN_R;
#[doc = "Field `GPIOKLPEN` reader - GPIO peripheral clock enable during CSleep mode"]
pub use GPIOALPEN_R as GPIOKLPEN_R;
#[doc = "Field `CRCLPEN` reader - CRC peripheral clock enable during CSleep mode"]
pub use GPIOALPEN_R as CRCLPEN_R;
#[doc = "Field `BDMALPEN` reader - BDMA Clock Enable During CSleep Mode"]
pub use GPIOALPEN_R as BDMALPEN_R;
#[doc = "Field `ADC3LPEN` reader - ADC3 Peripheral Clocks Enable During CSleep Mode"]
pub use GPIOALPEN_R as ADC3LPEN_R;
#[doc = "Field `BKPRAMLPEN` reader - Backup RAM Clock Enable During CSleep Mode"]
pub use GPIOALPEN_R as BKPRAMLPEN_R;
#[doc = "Field `SRAM4LPEN` reader - SRAM4 Clock Enable During CSleep Mode"]
pub use GPIOALPEN_R as SRAM4LPEN_R;
#[doc = "Field `GPIOBLPEN` writer - GPIO peripheral clock enable during CSleep mode"]
pub use GPIOALPEN_W as GPIOBLPEN_W;
#[doc = "Field `GPIOCLPEN` writer - GPIO peripheral clock enable during CSleep mode"]
pub use GPIOALPEN_W as GPIOCLPEN_W;
#[doc = "Field `GPIODLPEN` writer - GPIO peripheral clock enable during CSleep mode"]
pub use GPIOALPEN_W as GPIODLPEN_W;
#[doc = "Field `GPIOELPEN` writer - GPIO peripheral clock enable during CSleep mode"]
pub use GPIOALPEN_W as GPIOELPEN_W;
#[doc = "Field `GPIOFLPEN` writer - GPIO peripheral clock enable during CSleep mode"]
pub use GPIOALPEN_W as GPIOFLPEN_W;
#[doc = "Field `GPIOGLPEN` writer - GPIO peripheral clock enable during CSleep mode"]
pub use GPIOALPEN_W as GPIOGLPEN_W;
#[doc = "Field `GPIOHLPEN` writer - GPIO peripheral clock enable during CSleep mode"]
pub use GPIOALPEN_W as GPIOHLPEN_W;
#[doc = "Field `GPIOILPEN` writer - GPIO peripheral clock enable during CSleep mode"]
pub use GPIOALPEN_W as GPIOILPEN_W;
#[doc = "Field `GPIOJLPEN` writer - GPIO peripheral clock enable during CSleep mode"]
pub use GPIOALPEN_W as GPIOJLPEN_W;
#[doc = "Field `GPIOKLPEN` writer - GPIO peripheral clock enable during CSleep mode"]
pub use GPIOALPEN_W as GPIOKLPEN_W;
#[doc = "Field `CRCLPEN` writer - CRC peripheral clock enable during CSleep mode"]
pub use GPIOALPEN_W as CRCLPEN_W;
#[doc = "Field `BDMALPEN` writer - BDMA Clock Enable During CSleep Mode"]
pub use GPIOALPEN_W as BDMALPEN_W;
#[doc = "Field `ADC3LPEN` writer - ADC3 Peripheral Clocks Enable During CSleep Mode"]
pub use GPIOALPEN_W as ADC3LPEN_W;
#[doc = "Field `BKPRAMLPEN` writer - Backup RAM Clock Enable During CSleep Mode"]
pub use GPIOALPEN_W as BKPRAMLPEN_W;
#[doc = "Field `SRAM4LPEN` writer - SRAM4 Clock Enable During CSleep Mode"]
pub use GPIOALPEN_W as SRAM4LPEN_W;
impl R {
#[doc = "Bit 0 - GPIO peripheral clock enable during CSleep mode"]
#[inline(always)]
pub fn gpioalpen(&self) -> GPIOALPEN_R {
GPIOALPEN_R::new((self.bits & 1) != 0)
}
#[doc = "Bit 1 - GPIO peripheral clock enable during CSleep mode"]
#[inline(always)]
pub fn gpioblpen(&self) -> GPIOBLPEN_R {
GPIOBLPEN_R::new(((self.bits >> 1) & 1) != 0)
}
#[doc = "Bit 2 - GPIO peripheral clock enable during CSleep mode"]
#[inline(always)]
pub fn gpioclpen(&self) -> GPIOCLPEN_R {
GPIOCLPEN_R::new(((self.bits >> 2) & 1) != 0)
}
#[doc = "Bit 3 - GPIO peripheral clock enable during CSleep mode"]
#[inline(always)]
pub fn gpiodlpen(&self) -> GPIODLPEN_R {
GPIODLPEN_R::new(((self.bits >> 3) & 1) != 0)
}
#[doc = "Bit 4 - GPIO peripheral clock enable during CSleep mode"]
#[inline(always)]
pub fn gpioelpen(&self) -> GPIOELPEN_R {
GPIOELPEN_R::new(((self.bits >> 4) & 1) != 0)
}
#[doc = "Bit 5 - GPIO peripheral clock enable during CSleep mode"]
#[inline(always)]
pub fn gpioflpen(&self) -> GPIOFLPEN_R {
GPIOFLPEN_R::new(((self.bits >> 5) & 1) != 0)
}
#[doc = "Bit 6 - GPIO peripheral clock enable during CSleep mode"]
#[inline(always)]
pub fn gpioglpen(&self) -> GPIOGLPEN_R {
GPIOGLPEN_R::new(((self.bits >> 6) & 1) != 0)
}
#[doc = "Bit 7 - GPIO peripheral clock enable during CSleep mode"]
#[inline(always)]
pub fn gpiohlpen(&self) -> GPIOHLPEN_R {
GPIOHLPEN_R::new(((self.bits >> 7) & 1) != 0)
}
#[doc = "Bit 8 - GPIO peripheral clock enable during CSleep mode"]
#[inline(always)]
pub fn gpioilpen(&self) -> GPIOILPEN_R {
GPIOILPEN_R::new(((self.bits >> 8) & 1) != 0)
}
#[doc = "Bit 9 - GPIO peripheral clock enable during CSleep mode"]
#[inline(always)]
pub fn gpiojlpen(&self) -> GPIOJLPEN_R {
GPIOJLPEN_R::new(((self.bits >> 9) & 1) != 0)
}
#[doc = "Bit 10 - GPIO peripheral clock enable during CSleep mode"]
#[inline(always)]
pub fn gpioklpen(&self) -> GPIOKLPEN_R {
GPIOKLPEN_R::new(((self.bits >> 10) & 1) != 0)
}
#[doc = "Bit 19 - CRC peripheral clock enable during CSleep mode"]
#[inline(always)]
pub fn crclpen(&self) -> CRCLPEN_R {
CRCLPEN_R::new(((self.bits >> 19) & 1) != 0)
}
#[doc = "Bit 21 - BDMA Clock Enable During CSleep Mode"]
#[inline(always)]
pub fn bdmalpen(&self) -> BDMALPEN_R {
BDMALPEN_R::new(((self.bits >> 21) & 1) != 0)
}
#[doc = "Bit 24 - ADC3 Peripheral Clocks Enable During CSleep Mode"]
#[inline(always)]
pub fn adc3lpen(&self) -> ADC3LPEN_R {
ADC3LPEN_R::new(((self.bits >> 24) & 1) != 0)
}
#[doc = "Bit 28 - Backup RAM Clock Enable During CSleep Mode"]
#[inline(always)]
pub fn bkpramlpen(&self) -> BKPRAMLPEN_R {
BKPRAMLPEN_R::new(((self.bits >> 28) & 1) != 0)
}
#[doc = "Bit 29 - SRAM4 Clock Enable During CSleep Mode"]
#[inline(always)]
pub fn sram4lpen(&self) -> SRAM4LPEN_R {
SRAM4LPEN_R::new(((self.bits >> 29) & 1) != 0)
}
}
impl W {
#[doc = "Bit 0 - GPIO peripheral clock enable during CSleep mode"]
#[inline(always)]
pub fn gpioalpen(&mut self) -> GPIOALPEN_W<0> {
GPIOALPEN_W::new(self)
}
#[doc = "Bit 1 - GPIO peripheral clock enable during CSleep mode"]
#[inline(always)]
pub fn gpioblpen(&mut self) -> GPIOBLPEN_W<1> {
GPIOBLPEN_W::new(self)
}
#[doc = "Bit 2 - GPIO peripheral clock enable during CSleep mode"]
#[inline(always)]
pub fn gpioclpen(&mut self) -> GPIOCLPEN_W<2> {
GPIOCLPEN_W::new(self)
}
#[doc = "Bit 3 - GPIO peripheral clock enable during CSleep mode"]
#[inline(always)]
pub fn gpiodlpen(&mut self) -> GPIODLPEN_W<3> {
GPIODLPEN_W::new(self)
}
#[doc = "Bit 4 - GPIO peripheral clock enable during CSleep mode"]
#[inline(always)]
pub fn gpioelpen(&mut self) -> GPIOELPEN_W<4> {
GPIOELPEN_W::new(self)
}
#[doc = "Bit 5 - GPIO peripheral clock enable during CSleep mode"]
#[inline(always)]
pub fn gpioflpen(&mut self) -> GPIOFLPEN_W<5> {
GPIOFLPEN_W::new(self)
}
#[doc = "Bit 6 - GPIO peripheral clock enable during CSleep mode"]
#[inline(always)]
pub fn gpioglpen(&mut self) -> GPIOGLPEN_W<6> {
GPIOGLPEN_W::new(self)
}
#[doc = "Bit 7 - GPIO peripheral clock enable during CSleep mode"]
#[inline(always)]
pub fn gpiohlpen(&mut self) -> GPIOHLPEN_W<7> {
GPIOHLPEN_W::new(self)
}
#[doc = "Bit 8 - GPIO peripheral clock enable during CSleep mode"]
#[inline(always)]
pub fn gpioilpen(&mut self) -> GPIOILPEN_W<8> {
GPIOILPEN_W::new(self)
}
#[doc = "Bit 9 - GPIO peripheral clock enable during CSleep mode"]
#[inline(always)]
pub fn gpiojlpen(&mut self) -> GPIOJLPEN_W<9> {
GPIOJLPEN_W::new(self)
}
#[doc = "Bit 10 - GPIO peripheral clock enable during CSleep mode"]
#[inline(always)]
pub fn gpioklpen(&mut self) -> GPIOKLPEN_W<10> {
GPIOKLPEN_W::new(self)
}
#[doc = "Bit 19 - CRC peripheral clock enable during CSleep mode"]
#[inline(always)]
pub fn crclpen(&mut self) -> CRCLPEN_W<19> {
CRCLPEN_W::new(self)
}
#[doc = "Bit 21 - BDMA Clock Enable During CSleep Mode"]
#[inline(always)]
pub fn bdmalpen(&mut self) -> BDMALPEN_W<21> {
BDMALPEN_W::new(self)
}
#[doc = "Bit 24 - ADC3 Peripheral Clocks Enable During CSleep Mode"]
#[inline(always)]
pub fn adc3lpen(&mut self) -> ADC3LPEN_W<24> {
ADC3LPEN_W::new(self)
}
#[doc = "Bit 28 - Backup RAM Clock Enable During CSleep Mode"]
#[inline(always)]
pub fn bkpramlpen(&mut self) -> BKPRAMLPEN_W<28> {
BKPRAMLPEN_W::new(self)
}
#[doc = "Bit 29 - SRAM4 Clock Enable During CSleep Mode"]
#[inline(always)]
pub fn sram4lpen(&mut self) -> SRAM4LPEN_W<29> {
SRAM4LPEN_W::new(self)
}
#[doc = "Writes raw bits to the register."]
#[inline(always)]
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
self.0.bits(bits);
self
}
}
#[doc = "RCC AHB4 Sleep Clock Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [ahb4lpenr](index.html) module"]
pub struct AHB4LPENR_SPEC;
impl crate::RegisterSpec for AHB4LPENR_SPEC {
type Ux = u32;
}
#[doc = "`read()` method returns [ahb4lpenr::R](R) reader structure"]
impl crate::Readable for AHB4LPENR_SPEC {
type Reader = R;
}
#[doc = "`write(|w| ..)` method takes [ahb4lpenr::W](W) writer structure"]
impl crate::Writable for AHB4LPENR_SPEC {
type Writer = W;
}
#[doc = "`reset()` method sets AHB4LPENR to value 0"]
impl crate::Resettable for AHB4LPENR_SPEC {
#[inline(always)]
fn reset_value() -> Self::Ux {
0
}
}