pub struct W(_);
Expand description
Register CCMR1_Output
writer
Implementations
sourceimpl W
impl W
sourcepub fn cc1s(&mut self) -> CC1S_W<'_, 0>
pub fn cc1s(&mut self) -> CC1S_W<'_, 0>
Bits 0:1 - Capture/Compare 1 selection This bit-field defines the direction of the channel (input/output) as well as the used input. Note: CC1S bits are writable only when the channel is OFF (CC1E = ’0â in TIMx_CCER).
sourcepub fn oc1fe(&mut self) -> OC1FE_W<'_, 2>
pub fn oc1fe(&mut self) -> OC1FE_W<'_, 2>
Bit 2 - Output Compare 1 fast enable This bit decreases the latency between a trigger event and a transition on the timer output. It must be used in one-pulse mode (OPM bit set in TIMx_CR1 register), to have the output pulse starting as soon as possible after the starting trigger.
sourcepub fn oc1pe(&mut self) -> OC1PE_W<'_, 3>
pub fn oc1pe(&mut self) -> OC1PE_W<'_, 3>
Bit 3 - Output Compare 1 preload enable Note: These bits can not be modified as long as LOCK level 3 has been programmed (LOCK bits in TIMx_BDTR register) and CC1S=â00â (the channel is configured in output). The PWM mode can be used without validating the preload register only in one pulse mode (OPM bit set in TIMx_CR1 register). Else the behavior is not guaranteed.
sourcepub fn oc1m(&mut self) -> OC1M_W<'_, 4>
pub fn oc1m(&mut self) -> OC1M_W<'_, 4>
Bits 4:6 - Output Compare 1 mode These bits define the behavior of the output reference signal OC1REF from which OC1 and OC1N are derived. OC1REF is active high whereas OC1 and OC1N active level depends on CC1P and CC1NP bits. Note: These bits can not be modified as long as LOCK level 3 has been programmed (LOCK bits in TIMx_BDTR register) and CC1S=â00â (the channel is configured in output). Note: In PWM mode, the OCREF level changes only when the result of the comparison changes or when the output compare mode switches from âfrozenâ mode to âPWMâ mode. Note: On channels having a complementary output, this bit field is preloaded. If the CCPC bit is set in the TIMx_CR2 register then the OC1M active bits take the new value from the preloaded bits only when a COM event is generated. Note: The OC1M[3] bit is not contiguous, located in bit 16.
sourcepub fn cc2s(&mut self) -> CC2S_W<'_, 8>
pub fn cc2s(&mut self) -> CC2S_W<'_, 8>
Bits 8:9 - Capture/Compare 2 selection This bit-field defines the direction of the channel (input/output) as well as the used input. Note: CC2S bits are writable only when the channel is OFF (CC2E = ’0â in TIMx_CCER).
sourcepub fn oc2fe(&mut self) -> OC2FE_W<'_, 10>
pub fn oc2fe(&mut self) -> OC2FE_W<'_, 10>
Bit 10 - Output Compare 2 fast enable Refer to OC1FE description.
sourcepub fn oc2pe(&mut self) -> OC2PE_W<'_, 11>
pub fn oc2pe(&mut self) -> OC2PE_W<'_, 11>
Bit 11 - Output Compare 2 preload enable Refer to OC1PE description.
sourcepub fn oc2m(&mut self) -> OC2M_W<'_, 12>
pub fn oc2m(&mut self) -> OC2M_W<'_, 12>
Bits 12:14 - Output Compare 2 mode Refer to OC1M[3:0] description.
sourcepub fn oc2ce(&mut self) -> OC2CE_W<'_, 15>
pub fn oc2ce(&mut self) -> OC2CE_W<'_, 15>
Bit 15 - Output Compare 2 clear enable Refer to OC1CE description.
sourcepub fn oc1m2(&mut self) -> OC1M2_W<'_, 16>
pub fn oc1m2(&mut self) -> OC1M2_W<'_, 16>
Bit 16 - Output Compare 1 mode These bits define the behavior of the output reference signal OC1REF from which OC1 and OC1N are derived. OC1REF is active high whereas OC1 and OC1N active level depends on CC1P and CC1NP bits. Note: These bits can not be modified as long as LOCK level 3 has been programmed (LOCK bits in TIMx_BDTR register) and CC1S=â00â (the channel is configured in output). Note: In PWM mode, the OCREF level changes only when the result of the comparison changes or when the output compare mode switches from âfrozenâ mode to âPWMâ mode. Note: On channels having a complementary output, this bit field is preloaded. If the CCPC bit is set in the TIMx_CR2 register then the OC1M active bits take the new value from the preloaded bits only when a COM event is generated. Note: The OC1M[3] bit is not contiguous, located in bit 16.
Methods from Deref<Target = W<CCMR1_OUTPUT_SPEC>>
Trait Implementations
sourceimpl From<W<CCMR1_OUTPUT_SPEC>> for W
impl From<W<CCMR1_OUTPUT_SPEC>> for W
sourcefn from(writer: W<CCMR1_OUTPUT_SPEC>) -> Self
fn from(writer: W<CCMR1_OUTPUT_SPEC>) -> Self
Converts to this type from the input type.
Auto Trait Implementations
Blanket Implementations
sourceimpl<T> BorrowMut<T> for T where
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
const: unstable · sourcefn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more