stm32g0 0.16.0

Device support crates for STM32G0 devices
Documentation 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61

///Register `DCR` reader
pub type R = crate::R<DCRrs>;
///Register `DCR` writer
pub type W = crate::W<DCRrs>;
///Field `DBA` reader - DMA base address This 5-bit vector defines the base-address for DMA transfers (when read/write access are done through the TIMx_DMAR address). DBA is defined as an offset starting from the address of the TIMx_CR1 register. Example: ... Example: Let us consider the following transfer: DBL = 7 transfers & DBA = TIMx_CR1. In this case the transfer is done to/from 7 registers starting from the TIMx_CR1 address.
pub type DBA_R = crate::FieldReader;
///Field `DBA` writer - DMA base address This 5-bit vector defines the base-address for DMA transfers (when read/write access are done through the TIMx_DMAR address). DBA is defined as an offset starting from the address of the TIMx_CR1 register. Example: ... Example: Let us consider the following transfer: DBL = 7 transfers & DBA = TIMx_CR1. In this case the transfer is done to/from 7 registers starting from the TIMx_CR1 address.
pub type DBA_W<'a, REG> = crate::FieldWriter<'a, REG, 5, u8, crate::Safe>;
///Field `DBL` reader - DMA burst length This 5-bit vector defines the number of DMA transfers (the timer recognizes a burst transfer when a read or a write access is done to the TIMx_DMAR address). ...
pub type DBL_R = crate::FieldReader;
///Field `DBL` writer - DMA burst length This 5-bit vector defines the number of DMA transfers (the timer recognizes a burst transfer when a read or a write access is done to the TIMx_DMAR address). ...
pub type DBL_W<'a, REG> = crate::FieldWriter<'a, REG, 5>;
impl R {
    ///Bits 0:4 - DMA base address This 5-bit vector defines the base-address for DMA transfers (when read/write access are done through the TIMx_DMAR address). DBA is defined as an offset starting from the address of the TIMx_CR1 register. Example: ... Example: Let us consider the following transfer: DBL = 7 transfers & DBA = TIMx_CR1. In this case the transfer is done to/from 7 registers starting from the TIMx_CR1 address.
    #[inline(always)]
    pub fn dba(&self) -> DBA_R {
        DBA_R::new((self.bits & 0x1f) as u8)
    }
    ///Bits 8:12 - DMA burst length This 5-bit vector defines the number of DMA transfers (the timer recognizes a burst transfer when a read or a write access is done to the TIMx_DMAR address). ...
    #[inline(always)]
    pub fn dbl(&self) -> DBL_R {
        DBL_R::new(((self.bits >> 8) & 0x1f) as u8)
    }
}
impl core::fmt::Debug for R {
    fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
        f.debug_struct("DCR")
            .field("dba", &self.dba())
            .field("dbl", &self.dbl())
            .finish()
    }
}
impl W {
    ///Bits 0:4 - DMA base address This 5-bit vector defines the base-address for DMA transfers (when read/write access are done through the TIMx_DMAR address). DBA is defined as an offset starting from the address of the TIMx_CR1 register. Example: ... Example: Let us consider the following transfer: DBL = 7 transfers & DBA = TIMx_CR1. In this case the transfer is done to/from 7 registers starting from the TIMx_CR1 address.
    #[inline(always)]
    pub fn dba(&mut self) -> DBA_W<DCRrs> {
        DBA_W::new(self, 0)
    }
    ///Bits 8:12 - DMA burst length This 5-bit vector defines the number of DMA transfers (the timer recognizes a burst transfer when a read or a write access is done to the TIMx_DMAR address). ...
    #[inline(always)]
    pub fn dbl(&mut self) -> DBL_W<DCRrs> {
        DBL_W::new(self, 8)
    }
}
/**DMA control register

You can [`read`](crate::Reg::read) this register and get [`dcr::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`dcr::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).

See register [structure](https://stm32-rs.github.io/stm32-rs/STM32G0B0.html#TIM3:DCR)*/
pub struct DCRrs;
impl crate::RegisterSpec for DCRrs {
    type Ux = u32;
}
///`read()` method returns [`dcr::R`](R) reader structure
impl crate::Readable for DCRrs {}
///`write(|w| ..)` method takes [`dcr::W`](W) writer structure
impl crate::Writable for DCRrs {
    type Safety = crate::Unsafe;
}
///`reset()` method sets DCR to value 0
impl crate::Resettable for DCRrs {}