[−][src]Struct stm32g0::stm32g0x1::flash::optr::R
Value read from the register
Methods
impl R
[src]
pub fn bits(&self) -> u32
[src]
Value of the register as raw bits
pub fn rdp(&self) -> RDPR
[src]
Bits 0:7 - Read protection level
pub fn boren(&self) -> BORENR
[src]
Bit 8 - BOR reset Level
pub fn borf_lev(&self) -> BORF_LEVR
[src]
Bits 9:10 - These bits contain the VDD supply level threshold that activates the reset
pub fn borr_lev(&self) -> BORR_LEVR
[src]
Bits 11:12 - These bits contain the VDD supply level threshold that releases the reset.
pub fn n_rst_stop(&self) -> NRST_STOPR
[src]
Bit 13 - nRST_STOP
pub fn n_rst_stdby(&self) -> NRST_STDBYR
[src]
Bit 14 - nRST_STDBY
pub fn n_rsts_hdw(&self) -> NRSTS_HDWR
[src]
Bit 15 - nRSTS_HDW
pub fn idwg_sw(&self) -> IDWG_SWR
[src]
Bit 16 - Independent watchdog selection
pub fn iwdg_stop(&self) -> IWDG_STOPR
[src]
Bit 17 - Independent watchdog counter freeze in Stop mode
pub fn iwdg_stdby(&self) -> IWDG_STDBYR
[src]
Bit 18 - Independent watchdog counter freeze in Standby mode
pub fn wwdg_sw(&self) -> WWDG_SWR
[src]
Bit 19 - Window watchdog selection
pub fn ram_parity_check(&self) -> RAM_PARITY_CHECKR
[src]
Bit 22 - SRAM parity check control
pub fn n_boot_sel(&self) -> NBOOT_SELR
[src]
Bit 24 - nBOOT_SEL
pub fn n_boot1(&self) -> NBOOT1R
[src]
Bit 25 - Boot configuration
pub fn n_boot0(&self) -> NBOOT0R
[src]
Bit 26 - nBOOT0 option bit
pub fn nrst_mode(&self) -> NRST_MODER
[src]
Bits 27:28 - NRST_MODE
pub fn irhen(&self) -> IRHENR
[src]
Bit 29 - Internal reset holder enable bit
Auto Trait Implementations
Blanket Implementations
impl<T> From<T> for T
[src]
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Same<T> for T
type Output = T
Should always be Self