stm32f3-staging 0.17.0

///Register `CR2` reader
pub type R = crate::R<CR2rs>;
///Register `CR2` writer
pub type W = crate::W<CR2rs>;
/**Capture/compare preloaded control

Value on reset: 0*/
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
pub enum CCPC {
    ///0: CCxE, CCxNE and OCxM bits are not preloaded
    NotPreloaded = 0,
    ///1: CCxE, CCxNE and OCxM bits are preloaded
    Preloaded = 1,
}
impl From<CCPC> for bool {
    #[inline(always)]
    fn from(variant: CCPC) -> Self {
        variant as u8 != 0
    }
}
///Field `CCPC` reader - Capture/compare preloaded control
pub type CCPC_R = crate::BitReader<CCPC>;
impl CCPC_R {
    ///Get enumerated values variant
    #[inline(always)]
    pub const fn variant(&self) -> CCPC {
        match self.bits {
            false => CCPC::NotPreloaded,
            true => CCPC::Preloaded,
        }
    }
    ///CCxE, CCxNE and OCxM bits are not preloaded
    #[inline(always)]
    pub fn is_not_preloaded(&self) -> bool {
        *self == CCPC::NotPreloaded
    }
    ///CCxE, CCxNE and OCxM bits are preloaded
    #[inline(always)]
    pub fn is_preloaded(&self) -> bool {
        *self == CCPC::Preloaded
    }
}
///Field `CCPC` writer - Capture/compare preloaded control
pub type CCPC_W<'a, REG> = crate::BitWriter<'a, REG, CCPC>;
impl<'a, REG> CCPC_W<'a, REG>
where
    REG: crate::Writable + crate::RegisterSpec,
{
    ///CCxE, CCxNE and OCxM bits are not preloaded
    #[inline(always)]
    pub fn not_preloaded(self) -> &'a mut crate::W<REG> {
        self.variant(CCPC::NotPreloaded)
    }
    ///CCxE, CCxNE and OCxM bits are preloaded
    #[inline(always)]
    pub fn preloaded(self) -> &'a mut crate::W<REG> {
        self.variant(CCPC::Preloaded)
    }
}
/**Capture/compare control update selection

Value on reset: 0*/
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
pub enum CCUS {
    ///0: When capture/compare control bits are preloaded (CCPC=1), they are updated by setting the COMG bit only
    Sw = 0,
    ///1: When capture/compare control bits are preloaded (CCPC=1), they are updated by setting the COMG bit or when an rising edge occurs on TRGI
    SwOrEdge = 1,
}
impl From<CCUS> for bool {
    #[inline(always)]
    fn from(variant: CCUS) -> Self {
        variant as u8 != 0
    }
}
///Field `CCUS` reader - Capture/compare control update selection
pub type CCUS_R = crate::BitReader<CCUS>;
impl CCUS_R {
    ///Get enumerated values variant
    #[inline(always)]
    pub const fn variant(&self) -> CCUS {
        match self.bits {
            false => CCUS::Sw,
            true => CCUS::SwOrEdge,
        }
    }
    ///When capture/compare control bits are preloaded (CCPC=1), they are updated by setting the COMG bit only
    #[inline(always)]
    pub fn is_sw(&self) -> bool {
        *self == CCUS::Sw
    }
    ///When capture/compare control bits are preloaded (CCPC=1), they are updated by setting the COMG bit or when an rising edge occurs on TRGI
    #[inline(always)]
    pub fn is_sw_or_edge(&self) -> bool {
        *self == CCUS::SwOrEdge
    }
}
///Field `CCUS` writer - Capture/compare control update selection
pub type CCUS_W<'a, REG> = crate::BitWriter<'a, REG, CCUS>;
impl<'a, REG> CCUS_W<'a, REG>
where
    REG: crate::Writable + crate::RegisterSpec,
{
    ///When capture/compare control bits are preloaded (CCPC=1), they are updated by setting the COMG bit only
    #[inline(always)]
    pub fn sw(self) -> &'a mut crate::W<REG> {
        self.variant(CCUS::Sw)
    }
    ///When capture/compare control bits are preloaded (CCPC=1), they are updated by setting the COMG bit or when an rising edge occurs on TRGI
    #[inline(always)]
    pub fn sw_or_edge(self) -> &'a mut crate::W<REG> {
        self.variant(CCUS::SwOrEdge)
    }
}
/**Capture/compare DMA selection

Value on reset: 0*/
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
pub enum CCDS {
    ///0: CCx DMA request sent when CCx event occurs
    OnCompare = 0,
    ///1: CCx DMA request sent when update event occurs
    OnUpdate = 1,
}
impl From<CCDS> for bool {
    #[inline(always)]
    fn from(variant: CCDS) -> Self {
        variant as u8 != 0
    }
}
///Field `CCDS` reader - Capture/compare DMA selection
pub type CCDS_R = crate::BitReader<CCDS>;
impl CCDS_R {
    ///Get enumerated values variant
    #[inline(always)]
    pub const fn variant(&self) -> CCDS {
        match self.bits {
            false => CCDS::OnCompare,
            true => CCDS::OnUpdate,
        }
    }
    ///CCx DMA request sent when CCx event occurs
    #[inline(always)]
    pub fn is_on_compare(&self) -> bool {
        *self == CCDS::OnCompare
    }
    ///CCx DMA request sent when update event occurs
    #[inline(always)]
    pub fn is_on_update(&self) -> bool {
        *self == CCDS::OnUpdate
    }
}
///Field `CCDS` writer - Capture/compare DMA selection
pub type CCDS_W<'a, REG> = crate::BitWriter<'a, REG, CCDS>;
impl<'a, REG> CCDS_W<'a, REG>
where
    REG: crate::Writable + crate::RegisterSpec,
{
    ///CCx DMA request sent when CCx event occurs
    #[inline(always)]
    pub fn on_compare(self) -> &'a mut crate::W<REG> {
        self.variant(CCDS::OnCompare)
    }
    ///CCx DMA request sent when update event occurs
    #[inline(always)]
    pub fn on_update(self) -> &'a mut crate::W<REG> {
        self.variant(CCDS::OnUpdate)
    }
}
/**Output Idle state (OC%s output)

Value on reset: 0*/
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
pub enum OIS1 {
    ///0: OCx=0 (after a dead-time if OCx(N) is implemented) when MOE=0
    Reset = 0,
    ///1: OCx=1 (after a dead-time if OCx(N) is implemented) when MOE=0
    Set = 1,
}
impl From<OIS1> for bool {
    #[inline(always)]
    fn from(variant: OIS1) -> Self {
        variant as u8 != 0
    }
}
///Field `OIS(1-1)` reader - Output Idle state (OC%s output)
pub type OIS_R = crate::BitReader<OIS1>;
impl OIS_R {
    ///Get enumerated values variant
    #[inline(always)]
    pub const fn variant(&self) -> OIS1 {
        match self.bits {
            false => OIS1::Reset,
            true => OIS1::Set,
        }
    }
    ///OCx=0 (after a dead-time if OCx(N) is implemented) when MOE=0
    #[inline(always)]
    pub fn is_reset(&self) -> bool {
        *self == OIS1::Reset
    }
    ///OCx=1 (after a dead-time if OCx(N) is implemented) when MOE=0
    #[inline(always)]
    pub fn is_set(&self) -> bool {
        *self == OIS1::Set
    }
}
///Field `OIS(1-1)` writer - Output Idle state (OC%s output)
pub type OIS_W<'a, REG> = crate::BitWriter<'a, REG, OIS1>;
impl<'a, REG> OIS_W<'a, REG>
where
    REG: crate::Writable + crate::RegisterSpec,
{
    ///OCx=0 (after a dead-time if OCx(N) is implemented) when MOE=0
    #[inline(always)]
    pub fn reset(self) -> &'a mut crate::W<REG> {
        self.variant(OIS1::Reset)
    }
    ///OCx=1 (after a dead-time if OCx(N) is implemented) when MOE=0
    #[inline(always)]
    pub fn set_(self) -> &'a mut crate::W<REG> {
        self.variant(OIS1::Set)
    }
}
/**Output Idle state (OC%sN output)

Value on reset: 0*/
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
pub enum OIS1N {
    ///0: OCxN=0 after a dead-time when MOE=0
    Reset = 0,
    ///1: OCxN=1 after a dead-time when MOE=0
    Set = 1,
}
impl From<OIS1N> for bool {
    #[inline(always)]
    fn from(variant: OIS1N) -> Self {
        variant as u8 != 0
    }
}
///Field `OISN(1-1)` reader - Output Idle state (OC%sN output)
pub type OISN_R = crate::BitReader<OIS1N>;
impl OISN_R {
    ///Get enumerated values variant
    #[inline(always)]
    pub const fn variant(&self) -> OIS1N {
        match self.bits {
            false => OIS1N::Reset,
            true => OIS1N::Set,
        }
    }
    ///OCxN=0 after a dead-time when MOE=0
    #[inline(always)]
    pub fn is_reset(&self) -> bool {
        *self == OIS1N::Reset
    }
    ///OCxN=1 after a dead-time when MOE=0
    #[inline(always)]
    pub fn is_set(&self) -> bool {
        *self == OIS1N::Set
    }
}
///Field `OISN(1-1)` writer - Output Idle state (OC%sN output)
pub type OISN_W<'a, REG> = crate::BitWriter<'a, REG, OIS1N>;
impl<'a, REG> OISN_W<'a, REG>
where
    REG: crate::Writable + crate::RegisterSpec,
{
    ///OCxN=0 after a dead-time when MOE=0
    #[inline(always)]
    pub fn reset(self) -> &'a mut crate::W<REG> {
        self.variant(OIS1N::Reset)
    }
    ///OCxN=1 after a dead-time when MOE=0
    #[inline(always)]
    pub fn set_(self) -> &'a mut crate::W<REG> {
        self.variant(OIS1N::Set)
    }
}
impl R {
    ///Bit 0 - Capture/compare preloaded control
    #[inline(always)]
    pub fn ccpc(&self) -> CCPC_R {
        CCPC_R::new((self.bits & 1) != 0)
    }
    ///Bit 2 - Capture/compare control update selection
    #[inline(always)]
    pub fn ccus(&self) -> CCUS_R {
        CCUS_R::new(((self.bits >> 2) & 1) != 0)
    }
    ///Bit 3 - Capture/compare DMA selection
    #[inline(always)]
    pub fn ccds(&self) -> CCDS_R {
        CCDS_R::new(((self.bits >> 3) & 1) != 0)
    }
    ///Output Idle state (OC(1-1) output)
    ///
    ///<div class="warning">`n` is number of field in register. `n == 0` corresponds to `OIS1` field.</div>
    #[inline(always)]
    pub fn ois(&self, n: u8) -> OIS_R {
        #[allow(clippy::no_effect)] [(); 1][n as usize];
        OIS_R::new(((self.bits >> (n * 0 + 8)) & 1) != 0)
    }
    ///Iterator for array of:
    ///Output Idle state (OC(1-1) output)
    #[inline(always)]
    pub fn ois_iter(&self) -> impl Iterator<Item = OIS_R> + '_ {
        (0..1).map(move |n| OIS_R::new(((self.bits >> (n * 0 + 8)) & 1) != 0))
    }
    ///Bit 8 - Output Idle state (OC1 output)
    #[inline(always)]
    pub fn ois1(&self) -> OIS_R {
        OIS_R::new(((self.bits >> 8) & 1) != 0)
    }
    ///Output Idle state (OC(1-1)N output)
    ///
    ///<div class="warning">`n` is number of field in register. `n == 0` corresponds to `OIS1N` field.</div>
    #[inline(always)]
    pub fn oisn(&self, n: u8) -> OISN_R {
        #[allow(clippy::no_effect)] [(); 1][n as usize];
        OISN_R::new(((self.bits >> (n * 0 + 9)) & 1) != 0)
    }
    ///Iterator for array of:
    ///Output Idle state (OC(1-1)N output)
    #[inline(always)]
    pub fn oisn_iter(&self) -> impl Iterator<Item = OISN_R> + '_ {
        (0..1).map(move |n| OISN_R::new(((self.bits >> (n * 0 + 9)) & 1) != 0))
    }
    ///Bit 9 - Output Idle state (OC1N output)
    #[inline(always)]
    pub fn ois1n(&self) -> OISN_R {
        OISN_R::new(((self.bits >> 9) & 1) != 0)
    }
}
impl core::fmt::Debug for R {
    fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
        f.debug_struct("CR2")
            .field("ois1n", &self.ois1n())
            .field("ois1", &self.ois1())
            .field("ccds", &self.ccds())
            .field("ccus", &self.ccus())
            .field("ccpc", &self.ccpc())
            .finish()
    }
}
impl W {
    ///Bit 0 - Capture/compare preloaded control
    #[inline(always)]
    pub fn ccpc(&mut self) -> CCPC_W<CR2rs> {
        CCPC_W::new(self, 0)
    }
    ///Bit 2 - Capture/compare control update selection
    #[inline(always)]
    pub fn ccus(&mut self) -> CCUS_W<CR2rs> {
        CCUS_W::new(self, 2)
    }
    ///Bit 3 - Capture/compare DMA selection
    #[inline(always)]
    pub fn ccds(&mut self) -> CCDS_W<CR2rs> {
        CCDS_W::new(self, 3)
    }
    ///Output Idle state (OC(1-1) output)
    ///
    ///<div class="warning">`n` is number of field in register. `n == 0` corresponds to `OIS1` field.</div>
    #[inline(always)]
    pub fn ois(&mut self, n: u8) -> OIS_W<CR2rs> {
        #[allow(clippy::no_effect)] [(); 1][n as usize];
        OIS_W::new(self, n * 0 + 8)
    }
    ///Bit 8 - Output Idle state (OC1 output)
    #[inline(always)]
    pub fn ois1(&mut self) -> OIS_W<CR2rs> {
        OIS_W::new(self, 8)
    }
    ///Output Idle state (OC(1-1)N output)
    ///
    ///<div class="warning">`n` is number of field in register. `n == 0` corresponds to `OIS1N` field.</div>
    #[inline(always)]
    pub fn oisn(&mut self, n: u8) -> OISN_W<CR2rs> {
        #[allow(clippy::no_effect)] [(); 1][n as usize];
        OISN_W::new(self, n * 0 + 9)
    }
    ///Bit 9 - Output Idle state (OC1N output)
    #[inline(always)]
    pub fn ois1n(&mut self) -> OISN_W<CR2rs> {
        OISN_W::new(self, 9)
    }
}
/**control register 2

You can [`read`](crate::Reg::read) this register and get [`cr2::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cr2::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).

See register [structure](https://stm32-rs.github.io/stm32-rs/STM32F303.html#TIM16:CR2)*/
pub struct CR2rs;
impl crate::RegisterSpec for CR2rs {
    type Ux = u32;
}
///`read()` method returns [`cr2::R`](R) reader structure
impl crate::Readable for CR2rs {}
///`write(|w| ..)` method takes [`cr2::W`](W) writer structure
impl crate::Writable for CR2rs {
    type Safety = crate::Unsafe;
    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
}
///`reset()` method sets CR2 to value 0
impl crate::Resettable for CR2rs {
    const RESET_VALUE: u32 = 0;
}