sov-rollup-interface 0.2.0

//! Defines traits and types used by the rollup to verify claims about the
//! DA layer.
use core::fmt::Debug;
use std::cmp::min;

use borsh::{BorshDeserialize, BorshSerialize};
use bytes::Buf;
use serde::de::DeserializeOwned;
use serde::{Deserialize, Serialize};

use crate::zk::ValidityCondition;
use crate::BasicAddress;

/// A specification for the types used by a DA layer.
pub trait DaSpec: 'static + Debug + PartialEq + Eq {
    /// The hash of a DA layer block
    type SlotHash: BlockHashTrait;

    /// The block header type used by the DA layer
    type BlockHeader: BlockHeaderTrait<Hash = Self::SlotHash>;

    /// The transaction type used by the DA layer.
    type BlobTransaction: BlobReaderTrait<Address = Self::Address>;

    /// The type used to represent addresses on the DA layer.
    type Address: BasicAddress;

    /// Any conditions imposed by the DA layer which need to be checked outside of the SNARK
    type ValidityCondition: ValidityCondition;

    /// A proof that each tx in a set of blob transactions is included in a given block.
    type InclusionMultiProof: Serialize + DeserializeOwned;

    /// A proof that a claimed set of transactions is complete.
    /// For example, this could be a range proof demonstrating that
    /// the provided BlobTransactions represent the entire contents
    /// of Celestia namespace in a given block
    type CompletenessProof: Serialize + DeserializeOwned;

    /// The parameters of the rollup which are baked into the state-transition function.
    /// For example, this could include the namespace of the rollup on Celestia.
    type ChainParams;
}

/// A `DaVerifier` implements the logic required to create a zk proof that some data
/// has been processed.
///
/// This trait implements the required functionality to *verify* claims of the form
/// "If X is the most recent block in the DA layer, then Y is the ordered set of transactions that must
/// be processed by the rollup."
pub trait DaVerifier {
    /// The set of types required by the DA layer.
    type Spec: DaSpec;

    /// The error type returned by the DA layer's verification function
    /// TODO: Should we add `std::Error` bound so it can be `()?` ?
    type Error: Debug;

    /// Create a new da verifier with the given chain parameters
    fn new(params: <Self::Spec as DaSpec>::ChainParams) -> Self;

    /// Verify a claimed set of transactions against a block header.
    fn verify_relevant_tx_list(
        &self,
        block_header: &<Self::Spec as DaSpec>::BlockHeader,
        txs: &[<Self::Spec as DaSpec>::BlobTransaction],
        inclusion_proof: <Self::Spec as DaSpec>::InclusionMultiProof,
        completeness_proof: <Self::Spec as DaSpec>::CompletenessProof,
    ) -> Result<<Self::Spec as DaSpec>::ValidityCondition, Self::Error>;
}

#[derive(Debug, Clone, Serialize, Deserialize, BorshDeserialize, BorshSerialize, PartialEq)]
/// Simple structure that implements the Read trait for a buffer and  counts the number of bytes read from the beginning.
/// Useful for the partial blob reading optimization: we know for each blob how many bytes have been read from the beginning.
///
/// Because of soundness issues we cannot implement the Buf trait because the prover could get unproved blob data using the chunk method.
pub struct CountedBufReader<B: Buf> {
    /// The original blob data.
    inner: B,

    /// An accumulator that stores the data read from the blob buffer into a vector.
    /// Allows easy access to the data that has already been read
    accumulator: Vec<u8>,
}

impl<B: Buf> CountedBufReader<B> {
    /// Creates a new buffer reader with counter from an objet that implements the buffer trait
    pub fn new(inner: B) -> Self {
        let buf_size = inner.remaining();
        CountedBufReader {
            inner,
            accumulator: Vec::with_capacity(buf_size),
        }
    }

    /// Advance the accumulator by `num_bytes` bytes. If `num_bytes` is greater than the length
    /// of remaining unverified data, then all remaining unverified data is added to the accumulator.
    pub fn advance(&mut self, num_bytes: usize) {
        let requested = num_bytes;
        let remaining = self.inner.remaining();
        if remaining == 0 {
            return;
        }
        // `Buf::advance` would panic if `num_bytes` was greater than the length of the remaining unverified data,
        // but we just advance to the end of the buffer.
        let num_to_read = min(remaining, requested);
        // Extend the inner vector with zeros (copy_to_slice requires the vector to have
        // the correct *length* not just capacity)
        self.accumulator
            .resize(self.accumulator.len() + num_to_read, 0);

        // Use copy_to_slice to overwrite the zeros we just added
        let accumulator_len = self.accumulator.len();
        self.inner
            .copy_to_slice(self.accumulator[accumulator_len - num_to_read..].as_mut());
    }

    /// Getter: returns a reference to an accumulator of the blob data read by the rollup
    pub fn accumulator(&self) -> &[u8] {
        &self.accumulator
    }

    /// Contains the total length of the data (length already read + length remaining)
    pub fn total_len(&self) -> usize {
        self.inner.remaining() + self.accumulator.len()
    }
}

/// This trait wraps "blob transaction" from a data availability layer allowing partial consumption of the
/// blob data by the rollup.
///
/// The motivation for this trait is limit the amount of validation work that a rollup has to perform when
/// verifying a state transition. In general, it will often be the case that a rollup only cares about some
/// portion of the data from a blob. For example, if a blob contains a malformed transaction then the rollup
/// will slash the sequencer and exit early - so it only cares about the content of the blob up to that point.
///
/// This trait allows the DaVerifier to track which data was read by the rollup, and only verify the relevant data.
pub trait BlobReaderTrait: Serialize + DeserializeOwned + Send + Sync + 'static {
    /// The type used to represent addresses on the DA layer.
    type Address: BasicAddress;

    /// Returns the address (on the DA layer) of the entity which submitted the blob transaction
    fn sender(&self) -> Self::Address;

    /// Returns the hash of the blob as it appears on the DA layer
    fn hash(&self) -> [u8; 32];

    /// Returns a slice containing all the data accessible to the rollup at this point in time.
    /// When running in native mode, the rollup can extend this slice by calling `advance`. In zk-mode,
    /// the rollup is limited to only the verified data.
    ///
    /// Rollups should use this method in conjunction with `advance` to read only the minimum amount
    /// of data required for execution
    fn verified_data(&self) -> &[u8];

    /// Returns the total number of bytes in the blob. Note that this may be unequal to `verified_data.len()`.
    fn total_len(&self) -> usize;

    /// Extends the `partial_data` accumulator with the next `num_bytes` of  data from the blob
    /// and returns a reference to the entire contents of the blob up to this point.
    ///
    /// If `num_bytes` is greater than the length of the remaining unverified data,
    /// then all remaining unverified data is added to the accumulator.
    ///
    /// ### Note:
    /// This method is only available when the `native` feature is enabled because it is unsafe to access
    /// unverified data during execution
    #[cfg(feature = "native")]
    fn advance(&mut self, num_bytes: usize) -> &[u8];

    /// Verifies all remaining unverified data in the blob and returns a reference to the entire contents of the blob.
    /// For efficiency, rollups should prefer use of `verified_data` and `advance` unless they know that all of the
    /// blob data will be required for execution.
    #[cfg(feature = "native")]
    fn full_data(&mut self) -> &[u8] {
        self.advance(self.total_len())
    }
}

/// Trait with collection of trait bounds for a block hash.
pub trait BlockHashTrait:
    Serialize + DeserializeOwned + PartialEq + Debug + Send + Sync + Clone + Eq + Into<[u8; 32]>
{
}

/// A block header, typically used in the context of an underlying DA blockchain.
pub trait BlockHeaderTrait: PartialEq + Debug + Clone + Serialize + DeserializeOwned {
    /// Each block header must have a unique canonical hash.
    type Hash: Clone;
    /// Each block header must contain the hash of the previous block.
    fn prev_hash(&self) -> Self::Hash;

    /// Hash the type to get the digest.
    fn hash(&self) -> Self::Hash;
}