smb2-client 0.2.3

//! SmbClient — drives the SMB2 exchange up to a usable named-pipe transport for RPC.
//! Flow: connect → negotiate → session-setup (NTLM, two round trips) → tree-connect IPC$
//! → create(pipe) → transact(). Post-authentication messages are signed.

use crate::header::{self, cmd};
use crate::transport::SmbTransport;
use crate::{msg, Result, SmbError};
use ntlmssp::Ntlm;
use rand::RngCore;

/// A logon credential: a plaintext password or a raw NT hash (pass-the-hash).
pub enum Cred<'a> {
    Password(&'a str),
    NtHash([u8; 16]),
}

pub struct SmbClient {
    transport: SmbTransport,
    message_id: u64,
    session_id: u64,
    tree_id: u32,
    sign_key: Option<[u8; 16]>,
    dialect: u16,
}

impl SmbClient {
    pub async fn connect(host: &str) -> Result<Self> {
        Ok(SmbClient {
            transport: SmbTransport::connect(host).await?,
            message_id: 0,
            session_id: 0,
            tree_id: 0,
            sign_key: None,
            dialect: 0,
        })
    }

    /// Send one command, returning the full response message (header + body).
    async fn call(&mut self, command: u16, body: &[u8]) -> Result<Vec<u8>> {
        let mut m = header::build(
            command,
            self.message_id,
            self.session_id,
            self.tree_id,
            self.sign_key.is_some(),
        );
        m.extend_from_slice(body);
        if let Some(key) = &self.sign_key {
            if self.dialect >= 0x0300 {
                header::sign_v3(&mut m, key); // 3.0.x → AES-CMAC
            } else {
                header::sign(&mut m, key); // 2.x → HMAC-SHA256
            }
        }
        self.message_id += 1;
        self.transport.send(&m).await?;
        let mut resp = self.transport.recv().await?;
        // A server may answer asynchronously: an interim STATUS_PENDING response, then the
        // real one on the same message id. Keep reading until the completion arrives.
        while header::parse(&resp)
            .map(|p| p.status)
            .unwrap_or(crate::status::SUCCESS)
            == crate::status::PENDING
        {
            resp = self.transport.recv().await?;
        }
        Ok(resp)
    }

    fn ok(resp: &[u8], expect: u16) -> Result<header::Parsed> {
        let p = header::parse(resp)?;
        if p.status != crate::status::SUCCESS {
            return Err(SmbError::Status(p.status, expect));
        }
        Ok(p)
    }

    /// Unauthenticated NEGOTIATE probe: returns (dialect revision, signing_required). Signing
    /// NOT required marks a host as an NTLM-relay target. Cheap — no session setup.
    pub async fn probe_signing(&mut self) -> Result<(u16, bool)> {
        let mut guid = [0u8; 16];
        rand::thread_rng().fill_bytes(&mut guid);
        let resp = self.call(cmd::NEGOTIATE, &msg::negotiate(&guid)).await?;
        Self::ok(&resp, cmd::NEGOTIATE)?;
        // NEGOTIATE response body @64: StructureSize(2), SecurityMode(2), DialectRevision(2).
        let security_mode = u16::from_le_bytes([resp[66], resp[67]]);
        let dialect = u16::from_le_bytes([resp[68], resp[69]]);
        Ok((dialect, security_mode & 0x0002 != 0)) // 0x2 = SMB2_NEGOTIATE_SIGNING_REQUIRED
    }

    /// Negotiate + NTLM session setup with a plaintext password.
    pub async fn login(
        &mut self,
        host: &str,
        domain: &str,
        user: &str,
        password: &str,
    ) -> Result<()> {
        self.login_cred(host, domain, user, Cred::Password(password))
            .await
    }

    /// Pass-the-ticket: negotiate + Kerberos session setup with a pre-built GSS/SPNEGO AP-REQ
    /// blob and the 16-byte GSS session key (the AP-REQ authenticator subkey). Single-shot — no
    /// NTLM challenge round-trip. Subsequent messages are signed with the Kerberos session key.
    pub async fn login_kerberos(&mut self, gss_blob: &[u8], session_key: &[u8; 16]) -> Result<()> {
        let mut guid = [0u8; 16];
        rand::thread_rng().fill_bytes(&mut guid);
        let resp = self.call(cmd::NEGOTIATE, &msg::negotiate(&guid)).await?;
        Self::ok(&resp, cmd::NEGOTIATE)?;
        self.dialect = u16::from_le_bytes([resp[68], resp[69]]);

        let key = if self.dialect >= 0x0300 {
            header::kdf_signing_key(session_key)
        } else {
            *session_key
        };
        // SESSION_SETUP with the Kerberos AP-REQ (single-shot; session_id assigned in the reply).
        let resp = self
            .call(cmd::SESSION_SETUP, &msg::session_setup(gss_blob))
            .await?;
        let p = header::parse(&resp)?;
        self.session_id = p.session_id;
        if p.status != crate::status::SUCCESS {
            return Err(SmbError::Status(p.status, cmd::SESSION_SETUP));
        }
        self.sign_key = Some(key); // sign everything from here on
        Ok(())
    }

    /// Null / anonymous session: negotiate + NTLM session setup with empty
    /// domain / user / password. On a DC that still permits anonymous IPC$
    /// (`RestrictAnonymous=0`) this yields a session usable for
    /// SAMR / LSAT RID-cycling and share enumeration; on a hardened DC
    /// (2019+ default) the server returns `STATUS_ACCESS_DENIED` /
    /// `STATUS_LOGON_FAILURE` and the caller reports the box as hardened.
    ///
    /// Uses an empty-credential NTLMv2 exchange (the classic
    /// `""` / `""` / `""` null bind). No signing key results from an
    /// anonymous logon, so the session is unsigned — callers must not
    /// attempt signed operations on it.
    pub async fn login_null(&mut self, host: &str) -> Result<()> {
        self.login_cred(host, "", "", Cred::Password("")).await
    }

    /// Pass-the-hash: negotiate + NTLM session setup with a raw NT hash.
    pub async fn login_hash(
        &mut self,
        host: &str,
        domain: &str,
        user: &str,
        nt: &[u8; 16],
    ) -> Result<()> {
        self.login_cred(host, domain, user, Cred::NtHash(*nt)).await
    }

    /// Negotiate + NTLM session setup with either a password or an NT hash.
    pub async fn login_cred(
        &mut self,
        host: &str,
        domain: &str,
        user: &str,
        cred: Cred<'_>,
    ) -> Result<()> {
        // NEGOTIATE
        let mut guid = [0u8; 16];
        rand::thread_rng().fill_bytes(&mut guid);
        let resp = self.call(cmd::NEGOTIATE, &msg::negotiate(&guid)).await?;
        Self::ok(&resp, cmd::NEGOTIATE)?;
        // DialectRevision is at response body offset 4 → absolute 68; it selects the signing algo.
        self.dialect = u16::from_le_bytes([resp[68], resp[69]]);

        // SESSION_SETUP #1: NTLM NEGOTIATE wrapped in SPNEGO negTokenInit.
        let ntlm = Ntlm::new();
        let init = crate::spnego::negotiate_init(ntlm.negotiate());
        let resp = self
            .call(cmd::SESSION_SETUP, &msg::session_setup(&init))
            .await?;
        let p = header::parse(&resp)?;
        if p.status != crate::status::MORE_PROCESSING_REQUIRED {
            return Err(SmbError::Status(p.status, cmd::SESSION_SETUP));
        }
        self.session_id = p.session_id;

        // The server CHALLENGE (Type 2) is embedded in a SPNEGO negTokenResp.
        let blob = msg::session_setup_token(&resp)?;
        let challenge = crate::spnego::find_ntlm(&blob).ok_or(SmbError::BadToken)?;

        // Build AUTHENTICATE; the exported session key becomes our signing key.
        let (type3, session_key) = match cred {
            Cred::Password(pw) => ntlm.authenticate(challenge, domain, user, pw, host),
            Cred::NtHash(nt) => ntlm.authenticate_hash(challenge, domain, user, &nt, host),
        }
        .map_err(|e| SmbError::Ntlm(e.to_string()))?;

        // Derive the signing key: 2.x uses the session key directly, 3.0.x derives an
        // AES-CMAC key from it (SP800-108 KDF).
        let key = if self.dialect >= 0x0300 {
            header::kdf_signing_key(&session_key)
        } else {
            session_key
        };
        // SESSION_SETUP #2: AUTHENTICATE (Type 3). SMB 3.x requires the final session setup to
        // be signed with the new key; 2.x leaves it unsigned (matching Windows).
        if self.dialect >= 0x0300 {
            self.sign_key = Some(key);
        }
        let token = crate::spnego::negotiate_resp(&type3);
        let resp = self
            .call(cmd::SESSION_SETUP, &msg::session_setup(&token))
            .await?;
        Self::ok(&resp, cmd::SESSION_SETUP)?;
        self.sign_key = Some(key); // sign everything from here on
        Ok(())
    }

    /// Connect to a share, e.g. `\\dc01\IPC$`.
    pub async fn tree_connect(&mut self, unc: &str) -> Result<()> {
        let resp = self
            .call(cmd::TREE_CONNECT, &msg::tree_connect(unc))
            .await?;
        let p = Self::ok(&resp, cmd::TREE_CONNECT)?;
        self.tree_id = p.tree_id;
        Ok(())
    }

    /// Open a named pipe on the connected tree and return its FileId.
    pub async fn open_pipe(&mut self, name: &str) -> Result<[u8; 16]> {
        let resp = self.call(cmd::CREATE, &msg::create_pipe(name)).await?;
        Self::ok(&resp, cmd::CREATE)?;
        msg::create_file_id(&resp)
    }

    /// Read up to `max` bytes from a pipe (SMB2 READ). Returns empty at end-of-pipe. Used to
    /// drain RPC response fragments that don't fit one FSCTL_PIPE_TRANSCEIVE.
    pub async fn read_pipe(&mut self, file_id: &[u8; 16], max: u32) -> Result<Vec<u8>> {
        let resp = self
            .call(cmd::READ, &msg::read_req(file_id, 0, max))
            .await?;
        let p = header::parse(&resp)?;
        if p.status != crate::status::SUCCESS {
            return Ok(Vec::new()); // END_OF_FILE / no more data
        }
        msg::read_output(&resp)
    }

    /// Write to a pipe/file with no read back — used for a fire-and-forget RPC AUTH3.
    pub async fn write_pipe(&mut self, file_id: &[u8; 16], data: &[u8]) -> Result<()> {
        let resp = self
            .call(cmd::WRITE, &msg::write_req(file_id, 0, data))
            .await?;
        Self::ok(&resp, cmd::WRITE)?;
        Ok(())
    }

    /// One RPC round trip over the pipe (FSCTL_PIPE_TRANSCEIVE): send `data`, return output.
    pub async fn transact(&mut self, file_id: &[u8; 16], data: &[u8]) -> Result<Vec<u8>> {
        let resp = self
            .call(cmd::IOCTL, &msg::ioctl_transceive(file_id, data))
            .await?;
        Self::ok(&resp, cmd::IOCTL)?;
        msg::ioctl_output(&resp)
    }

    /// Read a whole file off the currently-connected disk share and delete it on close.
    /// `path` is relative to the share root (e.g. `Windows\Temp\out.txt`). Retries the open
    /// while the file does not yet exist — an async writer (e.g. our exec child) may still be
    /// starting. Returns the file contents (possibly empty). Tree-connect the share first.
    pub async fn read_file_delete(&mut self, path: &str) -> Result<Vec<u8>> {
        use crate::status;
        const ACCESS: u32 = 0x0013_0081; // READ_DATA | READ_ATTRS | READ_CONTROL | DELETE | SYNCHRONIZE
        const SHARE: u32 = 0x0000_0007; // R | W | D
        const OPEN: u32 = 0x0000_0001; // FILE_OPEN (fail if absent)
        const OPTS: u32 = 0x0000_1060; // NON_DIRECTORY | SYNCHRONOUS_IO_NONALERT | DELETE_ON_CLOSE

        // Poll for the file: it may not exist yet (writer still spawning →
        // OBJECT_NAME_NOT_FOUND) or the writer may still hold it without share-delete (→
        // SHARING_VIOLATION). Both are transient; wait for the child to finish and release.
        // Cap: 12 attempts × 250 ms = 3 s. When the writer legitimately succeeded the file
        // shows up in well under a second; longer polling just draws out the failure case
        // (e.g. `reg save HKLM\SAM` refused on a hardened DC, file will never appear).
        let mut file_id = None;
        let mut last = status::OBJECT_NAME_NOT_FOUND;
        for attempt in 0..12 {
            let resp = self
                .call(
                    cmd::CREATE,
                    &msg::create_file(path, ACCESS, SHARE, OPEN, OPTS),
                )
                .await?;
            let p = header::parse(&resp)?;
            if p.status == status::SUCCESS {
                file_id = Some(msg::create_file_id(&resp)?);
                break;
            }
            last = p.status;
            if p.status != status::OBJECT_NAME_NOT_FOUND && p.status != status::SHARING_VIOLATION {
                return Err(SmbError::Status(p.status, cmd::CREATE));
            }
            if attempt < 11 {
                tokio::time::sleep(std::time::Duration::from_millis(250)).await;
            }
        }
        let file_id = file_id.ok_or(SmbError::Status(last, cmd::CREATE))?;

        // Read to EOF in 64 KiB chunks.
        let mut data = Vec::new();
        loop {
            let resp = self
                .call(
                    cmd::READ,
                    &msg::read_req(&file_id, data.len() as u64, 0x0001_0000),
                )
                .await?;
            let p = header::parse(&resp)?;
            if p.status == status::END_OF_FILE {
                break;
            }
            if p.status != status::SUCCESS {
                break;
            }
            let chunk = msg::read_output(&resp)?;
            if chunk.is_empty() {
                break;
            }
            data.extend_from_slice(&chunk);
            if chunk.len() < 0x0001_0000 {
                break;
            }
        }
        // CLOSE triggers the delete-on-close.
        let _ = self.call(cmd::CLOSE, &msg::close_req(&file_id)).await;
        Ok(data)
    }

    /// Enumerate a directory on the currently-connected disk share (SMB2
    /// QUERY_DIRECTORY, FileDirectoryInformation). `path` is relative to the
    /// share root (`""` = the root itself). Read-only: opens the directory
    /// handle, drains entries until STATUS_NO_MORE_FILES, and closes. `.`/`..`
    /// are filtered out. Tree-connect the share first.
    pub async fn list_directory(&mut self, path: &str) -> Result<Vec<msg::DirEntry>> {
        use crate::status;
        // FILE_LIST_DIRECTORY | READ_ATTRS | SYNCHRONIZE
        const ACCESS: u32 = 0x0010_0081;
        const SHARE: u32 = 0x0000_0007; // R | W | D
        const OPEN: u32 = 0x0000_0001; // FILE_OPEN
        const OPTS: u32 = 0x0000_0021; // FILE_DIRECTORY_FILE | SYNCHRONOUS_IO_NONALERT

        let resp = self
            .call(
                cmd::CREATE,
                &msg::create_file(path, ACCESS, SHARE, OPEN, OPTS),
            )
            .await?;
        Self::ok(&resp, cmd::CREATE)?;
        let dir_id = msg::create_file_id(&resp)?;

        let mut entries = Vec::new();
        // Bound the number of QUERY_DIRECTORY round trips (each returns many
        // entries); a real directory closes out in a handful of calls.
        for _ in 0..4096 {
            let resp = self
                .call(
                    cmd::QUERY_DIRECTORY,
                    &msg::query_directory_req(&dir_id, "*", 0x0001_0000),
                )
                .await?;
            let p = header::parse(&resp)?;
            if p.status == status::NO_MORE_FILES {
                break;
            }
            if p.status != status::SUCCESS {
                let _ = self.call(cmd::CLOSE, &msg::close_req(&dir_id)).await;
                return Err(SmbError::Status(p.status, cmd::QUERY_DIRECTORY));
            }
            let batch = msg::parse_directory_info(&resp)?;
            if batch.is_empty() {
                break;
            }
            entries.extend(batch);
        }
        let _ = self.call(cmd::CLOSE, &msg::close_req(&dir_id)).await;
        Ok(entries)
    }

    /// Read a whole file off the currently-connected disk share, read-only, and
    /// close WITHOUT deleting it (unlike [`read_file_delete`], which is for our
    /// own exec output). `path` is relative to the share root. Fails if the
    /// file is absent. Tree-connect the share first.
    pub async fn read_file(&mut self, path: &str) -> Result<Vec<u8>> {
        use crate::status;
        // FILE_READ_DATA | READ_ATTRS | SYNCHRONIZE (no DELETE)
        const ACCESS: u32 = 0x0010_0081;
        const SHARE: u32 = 0x0000_0001; // R (let others read too)
        const OPEN: u32 = 0x0000_0001; // FILE_OPEN
        const OPTS: u32 = 0x0000_0060; // NON_DIRECTORY | SYNCHRONOUS_IO_NONALERT (no DELETE_ON_CLOSE)

        let resp = self
            .call(
                cmd::CREATE,
                &msg::create_file(path, ACCESS, SHARE, OPEN, OPTS),
            )
            .await?;
        Self::ok(&resp, cmd::CREATE)?;
        let file_id = msg::create_file_id(&resp)?;

        let mut data = Vec::new();
        loop {
            let resp = self
                .call(
                    cmd::READ,
                    &msg::read_req(&file_id, data.len() as u64, 0x0001_0000),
                )
                .await?;
            let p = header::parse(&resp)?;
            if p.status == status::END_OF_FILE || p.status != status::SUCCESS {
                break;
            }
            let chunk = msg::read_output(&resp)?;
            if chunk.is_empty() {
                break;
            }
            data.extend_from_slice(&chunk);
            if chunk.len() < 0x0001_0000 {
                break;
            }
        }
        let _ = self.call(cmd::CLOSE, &msg::close_req(&file_id)).await;
        Ok(data)
    }
}