ShardedQueue

Why you should use ShardedQueue

ShardedQueue is currently the fastest collection which can be used under highest concurrency and load among most popular solutions, like concurrent-queue - see benchmarks in directory benches and run them with

cargo bench

Installation

cargo add sharded_queue

Example

use std::thread::{available_parallelism};
use sharded_queue::ShardedQueue;

let max_concurrent_thread_count = available_parallelism().unwrap().get();
let sharded_queue = ShardedQueue::new(max_concurrent_thread_count);

sharded_queue.push_back(1);
let item = sharded_queue.pop_front_or_spin();

Why you may want to not use ShardedQueue

• Unlike in other concurrent queues, FIFO order is not guaranteed. While it may seem that FIFO order is guaranteed, it is not, because there can be a situation, when multiple consumers or producers triggered long resize of very large shards, all but last, then passed enough time for resize to finish, then 1 consumer or producer triggers long resize of last shard, and all other threads start to consume or produce, and eventually start spinning on last shard, without guarantee which will acquire spin lock first, so we can't even guarantee that ShardedQueue::pop_front_or_spin will acquire lock before ShardedQueue::push_back on first attempt

• ShardedQueue doesn't track length, since length's increment/decrement logic may change depending on use case, as well as logic when it goes from 1 to 0 or reverse (in some cases, like NonBlockingMutex, we don't even add action to queue when count reaches 1, but run it immediately in same thread), or even negative (to optimize some hot paths, like in some schedulers, since it is cheaper to restore count to correct state than to enforce that it can not go negative in some schedulers)

• ShardedQueue doesn't have many features, only necessary methods ShardedQueue::pop_front_or_spin and ShardedQueue::push_back are implemented

Benchmarks

ShardedQueue outperforms other concurrent queues. See benchmark logic in directory benches and reproduce results by running

cargo bench

Design explanation

ShardedQueue is designed to be used in some schedulers and NonBlockingMutex as the most efficient collection under highest concurrently and load (concurrent stack can't outperform it, because, unlike queue, which spreads pop and push contention between front and back, stack pop-s from back and push-es to back, which has double the contention over queue, while number of atomic increments per pop or push is same as in queue)

ShardedQueue uses array of protected by separate Mutex-es queues-shards, and atomically increments head_index or tail_index when pop or push happens, and computes shard index for current operation by applying modulo operation to head_index or tail_index

Modulo operation is optimized, knowing that

x % 2^n == x & (2^n - 1)

, so, as long as queue-shard count is a power of two, we can compute modulo very efficiently using formula

operation_index % queue_count == operation_index & (queue_count - 1)

As long as queue-shard count is a power of two and is greater than number of concurrent threads, and push/pop is fast enough to not overlap multiple laps, we have the highest possible performance. Synchronizing underlying non-concurrent queue costs only

• 1 additional atomic increment per push or pop (incrementing head_index or tail_index)
• 2 additional compare_and_swap-s(uncontended Mutex acquire and release)
• 1 cheap bit operation(to get modulo)
• 1 get from queue-shard list by index

Complex example

use sharded_queue::ShardedQueue;
use std::cell::UnsafeCell;
use std::fmt::{Debug, Display, Formatter};
use std::marker::PhantomData;
use std::ops::{Deref, DerefMut};
use std::sync::atomic::{AtomicUsize, Ordering};

pub struct NonBlockingMutex<'captured_variables, State: ?Sized> {
    task_count: AtomicUsize,
    task_queue: ShardedQueue<Box<dyn FnOnce(MutexGuard<State>) + Send + 'captured_variables>>,
    unsafe_state: UnsafeCell<State>,
}

/// [NonBlockingMutex] is needed to run actions atomically without thread blocking, or context
/// switch, or spin lock contention, or rescheduling on some scheduler
///
/// Notice that it uses [ShardedQueue] which doesn't guarantee order of retrieval, hence
/// [NonBlockingMutex] doesn't guarantee order of execution too, even of already added
/// items
impl<'captured_variables, State> NonBlockingMutex<'captured_variables, State> {
    #[inline]
    pub fn new(max_concurrent_thread_count: usize, state: State) -> Self {
        Self {
            task_count: AtomicUsize::new(0),
            task_queue: ShardedQueue::new(max_concurrent_thread_count),
            unsafe_state: UnsafeCell::new(state),
        }
    }

    /// Please don't forget that order of execution is not guaranteed. Atomicity of operations is guaranteed,
    /// but order can be random
    #[inline]
    pub fn run_if_first_or_schedule_on_first(
        &self,
        run_with_state: impl FnOnce(MutexGuard<State>) + Send + 'captured_variables,
    ) {
        if self.task_count.fetch_add(1, Ordering::Acquire) != 0 {
            self.task_queue.push_back(Box::new(run_with_state));
        } else {
            // If we acquired first lock, run should be executed immediately and run loop started
            run_with_state(unsafe { MutexGuard::new(self) });
            /// Note that if [`fetch_sub`] != 1
            /// => some thread entered first if block in method
            /// => [ShardedQueue::push_back] is guaranteed to be called
            /// => [ShardedQueue::pop_front_or_spin] will not deadlock while spins until it gets item
            ///
            /// Notice that we run action first, and only then decrement count
            /// with releasing(pushing) memory changes, even if it looks otherwise
            while self.task_count.fetch_sub(1, Ordering::Release) != 1 {
                self.task_queue.pop_front_or_spin()(unsafe { MutexGuard::new(self) });
            }
        }
    }
}

/// [Send], [Sync], and [MutexGuard] logic was taken from [std::sync::Mutex]
/// and [std::sync::MutexGuard]
///
/// these are the only places where `T: Send` matters; all other
/// functionality works fine on a single thread.
unsafe impl<'captured_variables, State: ?Sized + Send> Send
    for NonBlockingMutex<'captured_variables, State>
{
}
unsafe impl<'captured_variables, State: ?Sized + Send> Sync
    for NonBlockingMutex<'captured_variables, State>
{
}

/// Code was mostly taken from [std::sync::MutexGuard], it is expected to protect [State]
/// from moving out of synchronized loop
pub struct MutexGuard<
    'captured_variables,
    'non_blocking_mutex_ref,
    State: ?Sized + 'non_blocking_mutex_ref,
> {
    non_blocking_mutex: &'non_blocking_mutex_ref NonBlockingMutex<'captured_variables, State>,
    /// Adding it to ensure that [MutexGuard] implements [Send] and [Sync] in same cases
    /// as [std::sync::MutexGuard] and protects [State] from going out of synchronized
    /// execution loop
    ///
    /// todo remove when this error is no longer actual
    ///  negative trait bounds are not yet fully implemented; use marker types for now [E0658]
    _phantom_unsend: PhantomData<std::sync::MutexGuard<'non_blocking_mutex_ref, State>>,
}

// todo uncomment when this error is no longer actual
//  negative trait bounds are not yet fully implemented; use marker types for now [E0658]
// impl<'captured_variables, 'non_blocking_mutex_ref, State: ?Sized> !Send
//     for MutexGuard<'captured_variables, 'non_blocking_mutex_ref, State>
// {
// }
unsafe impl<'captured_variables, 'non_blocking_mutex_ref, State: ?Sized + Sync> Sync
    for MutexGuard<'captured_variables, 'non_blocking_mutex_ref, State>
{
}

impl<'captured_variables, 'non_blocking_mutex_ref, State: ?Sized>
    MutexGuard<'captured_variables, 'non_blocking_mutex_ref, State>
{
    unsafe fn new(
        non_blocking_mutex: &'non_blocking_mutex_ref NonBlockingMutex<'captured_variables, State>,
    ) -> Self {
        Self {
            non_blocking_mutex,
            _phantom_unsend: PhantomData,
        }
    }
}

impl<'captured_variables, 'non_blocking_mutex_ref, State: ?Sized> Deref
    for MutexGuard<'captured_variables, 'non_blocking_mutex_ref, State>
{
    type Target = State;

    #[inline]
    fn deref(&self) -> &State {
        unsafe { &*self.non_blocking_mutex.unsafe_state.get() }
    }
}

impl<'captured_variables, 'non_blocking_mutex_ref, State: ?Sized> DerefMut
    for MutexGuard<'captured_variables, 'non_blocking_mutex_ref, State>
{
    #[inline]
    fn deref_mut(&mut self) -> &mut State {
        unsafe { &mut *self.non_blocking_mutex.unsafe_state.get() }
    }
}

impl<'captured_variables, 'non_blocking_mutex_ref, State: ?Sized + Debug> Debug
    for MutexGuard<'captured_variables, 'non_blocking_mutex_ref, State>
{
    #[inline]
    fn fmt(&self, f: &mut Formatter<'_>) -> std::fmt::Result {
        Debug::fmt(&**self, f)
    }
}

impl<'captured_variables, 'non_blocking_mutex_ref, State: ?Sized + Display> Display
    for MutexGuard<'captured_variables, 'non_blocking_mutex_ref, State>
{
    #[inline]
    fn fmt(&self, f: &mut Formatter<'_>) -> std::fmt::Result {
        (**self).fmt(f)
    }
}