sh1108 0.2.0

`display-interface` compatible driver for the SH1108 OLED display controller
Documentation 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112

//! Draw a square, circle and triangle on the screen using the `embedded_graphics` crate.
//!
//! This example is for the STM32F103 "Blue Pill" board using I2C1.
//!
//! Wiring connections are as follows:
//!
//! ```
//! Display -> Blue Pill
//!     GND -> GND
//!     +5V -> VCC
//!     SDA -> PB9
//!     SCL -> PB8
//! ```
//!
//! Run on a Blue Pill with `cargo run --example graphics`.

#![no_std]
#![no_main]

use cortex_m_rt::{entry, exception, ExceptionFrame};
use display_interface_i2c::I2CInterface;
use embedded_graphics::{
    pixelcolor::BinaryColor,
    prelude::*,
    primitives::{Circle, Line, PrimitiveStyle, Rectangle},
};
use panic_semihosting as _;
use sh1108::{prelude::*, Builder};
use stm32f1xx_hal::{
    i2c::{BlockingI2c, DutyCycle, Mode},
    prelude::*,
    stm32,
};

#[entry]
fn main() -> ! {
    let dp = stm32::Peripherals::take().unwrap();
    let cp = cortex_m::Peripherals::take().unwrap();

    let mut flash = dp.FLASH.constrain();
    let rcc = dp.RCC.constrain();

    let clocks = rcc.cfgr.freeze(&mut flash.acr);

    let mut afio = dp.AFIO.constrain();

    let mut gpiob = dp.GPIOB.split();

    let mut res = gpiob.pb7.into_push_pull_output(&mut gpiob.crl);
    let scl = gpiob.pb8.into_alternate_open_drain(&mut gpiob.crh);
    let sda = gpiob.pb9.into_alternate_open_drain(&mut gpiob.crh);

    let mut delay = cp.SYST.delay(&clocks);

    let i2c = BlockingI2c::i2c1(
        dp.I2C1,
        (scl, sda),
        &mut afio.mapr,
        Mode::Fast {
            frequency: 100u32.kHz(),
            duty_cycle: DutyCycle::Ratio2to1,
        },
        clocks,
        1000,
        10,
        1000,
        1000,
    );

    let i2c_interface = I2CInterface::new(i2c, 0x3C, 0x40);

    let mut disp: GraphicsMode<_> = Builder::new().connect(i2c_interface).into();

    disp.reset(&mut res, &mut delay).unwrap();

    disp.init().unwrap();
    disp.flush().unwrap();

    Line::new(Point::new(8, 16 + 16), Point::new(8 + 16, 16 + 16))
        .into_styled(PrimitiveStyle::with_stroke(BinaryColor::On, 1))
        .draw(&mut disp)
        .unwrap();

    Line::new(Point::new(8, 16 + 16), Point::new(8 + 8, 16))
        .into_styled(PrimitiveStyle::with_stroke(BinaryColor::On, 1))
        .draw(&mut disp)
        .unwrap();

    Line::new(Point::new(8 + 16, 16 + 16), Point::new(8 + 8, 16))
        .into_styled(PrimitiveStyle::with_stroke(BinaryColor::On, 1))
        .draw(&mut disp)
        .unwrap();

    Rectangle::with_corners(Point::new(48, 16), Point::new(48 + 16, 16 + 16))
        .into_styled(PrimitiveStyle::with_stroke(BinaryColor::On, 1))
        .draw(&mut disp)
        .unwrap();

    Circle::new(Point::new(88, 16), 16)
        .into_styled(PrimitiveStyle::with_stroke(BinaryColor::On, 1))
        .draw(&mut disp)
        .unwrap();

    disp.flush().unwrap();

    loop {}
}

#[exception]
unsafe fn HardFault(ef: &ExceptionFrame) -> ! {
    panic!("{:#?}", ef);
}