rustyfi-syntax 0.1.5

Lexer, token stream, and syan2-based surface grammar for SATySFi
Documentation

rustyfi CI Release SATySFi License

SATySFi, reimplemented in Rust. One binary takes a .saty document and writes a PDF — same language, same packages, same output, faster compilation, no OCaml toolchain to install.

It speaks both dialects: 0.0 (upstream v0.0.x) and 0.1 (dev-0-1-0), and a document in one may use packages from the other.

Install

From latest release

$ # User-wide installation (~/.local/)
$ curl -fsSL https://raw.githubusercontent.com/yasuo-ozu/rustyfi/main/install.sh | bash

$ # System-wide installation (/usr/*)
$ curl -fsSL https://raw.githubusercontent.com/yasuo-ozu/rustyfi/main/install.sh | sudo bash

$ # Or manual prefix
$ curl -fsSL https://raw.githubusercontent.com/yasuo-ozu/rustyfi/main/install.sh | sudo bash -s -- --prefix /opt/rustyfi
$ curl -fsSL https://raw.githubusercontent.com/yasuo-ozu/rustyfi/main/install.sh | PREFIX=/opt/rustyfi sudo bash

$ rustyfi --version

From source

install.sh doubles as the installer for a checkout — run inside one, it uses the binary you just built instead of downloading anything:

$ git clone https://github.com/yasuo-ozu/rustyfi && cd rustyfi
$ cargo build --release --bin rustyfi
$ sh download-fonts.sh      # IPAex, Junicode, Latin Modern — pinned, ~175 MB
$ ./install.sh                      # --prefix DIR to put it elsewhere

Compile a document

@require: stdja-mini

document (|
  title = {Milestone One};
  author = {yasuo};
|) '<
  +p { Hello, world! This is \emph{SATySFi-in-Rust}. }
>

$ rustyfi doc.saty
  output written on doc.pdf (1 page(s), 2 line(s)).

A project with a Satyristes

Describe the project in a Satyristes (no opam file is required by rustyfi):

(version 0.0.2)

(library
  (name    "mylib")
  (version "0.1.0")
  (sources ((packageDir "src"))))

(libraryDoc
  (name             "mylib-doc")
  (version          "0.1.0")
  (workingDirectory "doc")
  (build            ((rustyfi "manual.saty")))
  (sources          ((doc "manual.pdf" "doc/manual.pdf"))))

(library …) says what the project publishes: (packageDir "src") installs every .satyh/.satyg under src/ as the package mylib. Install it into a project-local root (.rustyfi/) and it becomes @require:-able:

$ rustyfi install . --dest .rustyfi
installed mylib 0.1.0 (1 path(s)):
  dist/packages/mylib

$ rustyfi list --dest .rustyfi
mylib 0.1.0 (lang 0.0, 1 files)
  .rustyfi/dist/packages/mylib

(libraryDoc …) is a build target rather than a package: rustyfi build runs its (build …) commands in (workingDirectory …), then installs what (sources …) names.

$ rustyfi build
  rustyfi manual.saty

Package management

@require: resolves against lib roots (<root>/dist/packages/). Name one with --lib-root or $RUSTYFI_LIB_ROOT and it is used alone; name none and they are discovered, nearest first:

  1. lib-rustyfi/ above your document — a checked-out source tree
  2. .rustyfi/ beside a Satyristes — a project-local install
  3. <exe>/../lib/rustyfi — the install this binary belongs to
  4. ~/.local/lib/rustyfi, then /usr/local/lib/rustyfi and /usr/lib/rustyfi

All of them are searched in that order, so a package a project installed for itself layers over the system one rather than hiding it — and a clone needs no configuration at all.

To install someone else's package, the same binary is a Satyrographos analog:

$ rustyfi search font theano       # keywords narrow: every one must match
$ rustyfi install ./satysfi-xpath  # a local path, a .tar.gz, or a registry name
$ rustyfi install xpath easytable  # install/uninstall take several at once
$ rustyfi install https://example.org/pkg.tar.gz#sha256=…   # or a URL
$ rustyfi list

The default repository can live in your own config, so search and install work outside any project:

# ~/.config/rustyfi/config.toml
[[registry]]
url = "https://github.com/na4zagin3/satyrographos-repo"

[[registry]]
url = "https://example.org/another-index"

Useful options

flag what it does
-o <path> output path (default: the input with a .pdf extension)
--format <fmt> pdf (default), html, markdown or latex — see HTML output, Markdown output and LaTeX output
--svg-math html and markdown: equations as SVG <text> + <rect> — markdown's default; see How math is written
--svg-outline-math html and markdown: equations as outline paths with selectable text behind them — html's default
--katex html and markdown: equations as LaTeX in math delimiters, for a KaTeX/MathJax reader
--mathml html and markdown: equations as MathML Core, laid out by the browser itself
--unicode-math markdown only: equations as their characters (x²)
--lib-root <dir> where @require: looks for packages
--lang <v> 0.0 (default) or 0.1; a use header auto-selects 0.1
--font <file> use a TrueType/OpenType file as the regular face
--font-dir <dir> font root holding dist/hash/fonts.satysfi-hash
--no-cache bypass the compile cache
--no-aux do not read or write the .satysfi-aux cross-reference file
--timing per-phase timing to stderr (load / typecheck / eval / render)

HTML output

$ rustyfi --format html doc.saty  # a web page

--format html writes one continuous, self-contained web document. There are no pages in it: it is built from the flat block stream as it stood before page breaking, so nothing is cut at a page boundary and there are no headers, footers or page numbers. The browser does the typesetting — real <p> paragraphs it breaks, hyphenates and justifies itself, at whatever width the window happens to be.

What survives as structure:

  • headings, from register-outline paired with the destination frame the doc class wraps each title in — a structural match on the destination name, never a guess from font size. They get real id= anchors, but no table of contents is generated: a document that wants one typesets it, and a second generated copy above the title duplicated it in every real manual;
  • lists as <ul>/<ol>/<li>, emphasis as <em>/<strong>, where the list/emphasis commands opt in by emitting the inert list-mark / inline-mark boxes (the bundled 0.1 itemize, std-ja and v01-mini do). A list package that does not — the corpus enumitem — still indents, because the indentation a block-frame-breakable folds into its lines' offsets is recovered as a margin-left;
  • tables as real <table>/<tr>/<td>, with the rules the document actually drew: which grid lines exist is read off the table's own rule graphics, so easytable's three-rule booktabs look stays three rules instead of becoming a full grid;
  • framed blocks keep their own decoration — a stdjabook title box, a +code panel — because the deco callback the PDF path already runs is recorded box-local and replayed as a background (a flat panel) or a stretched <svg> (anything else). A frame whose deco draws nothing, which is most of them, still draws nothing;
  • code blocks as code: a fixed-pitch face reaches the browser as a monospace stack, and its line breaks survive as <br> rather than collapsing to spaces. The face is the only signal that separates a +code block from a wrapped paragraph — both are consecutive lines in the box stream, because code.satyh calls line-break once per source line exactly as the line breaker does per wrapped line;
  • links as <a href>, to a URL or to an in-document anchor;
  • footnotes as an <aside> immediately below the paragraph that references them — there is no page foot to collect them at, and putting them where they are read beats sending the reader to the end;
  • images as <img> with the picture inlined as a data URI (a JPEG passes through byte-for-byte; a picture placed repeatedly is emitted once and shared);
  • centring and flush-right, recovered from the inline-fil that produced them.

Math, graphics and rules become inline <svg> sized to fit the line. That is deliberate: they are drawings, not text. Math in particular is flattened to positioned glyphs during evaluation, so no MathML structure survives to recover.

Every math glyph is drawn as an outline path, taken from the face the document was typeset in, and math is the one thing in the page that does not depend on the reader's fonts at all. It is also the one place where it could not: each glyph carries an absolute offset computed against that face's metrics, so a reader without it gets a substitute whose advances are wrong and the equation runs into itself — ∀ is 7.992pt wide in Latin Modern Math and 12.000 in a common substitute, which is enough to bury the next symbol. The characters are not lost in the process: each equation also carries invisible, selectable text at the real positions, so an equation can still be selected, copied, found with the browser's own in-page search and read by a screen reader. It is what makes the output larger than it would otherwise be — about 40% on the most math-heavy document in the corpus, a couple of percent on the rest.

--svg-math draws the same equations with SVG <text> and <rect> instead, which is 0.70x the bytes raw and 0.57x gzipped and depends on the reader having the document's faces; --katex writes them as LaTeX in \(…\)/\[…\] for a page that runs KaTeX or MathJax; --mathml writes MathML Core, which the browser lays out itself with nothing loaded and nothing run (0.53x raw, 0.42x gzipped). See How math is written, including what a re-derivation from laid-out glyphs cannot give back.

Nothing is fetched and nothing is executed — no external stylesheet, no script, no remote font. Fonts are otherwise named, not embedded: a reflowed document is not metric-faithful by construction, so pinning the exact face for ordinary prose would buy nothing and cost megabytes (with the bundled Japanese faces, one manual came to 20 MB). The reader gets the real face if they have it and a sensible generic if they do not.

--format html-reflow is accepted as an alias for html.

What does not survive

  • A code block's indentation is lost. Its line breaks survive, as the code-blocks bullet above says, but the leading whitespace that made them worth keeping does not: indentation reaches the box stream as glue, and glue collapses to a single space so the browser can rejoin ordinary prose. Preserving it would mean white-space: pre, which is the one thing a reflowable backend must not do. The <br>s also stop for the rest of a paragraph once a proportional run appears in it — the fixed-pitch face is the only signal that the breaks are the author's, and a mixed paragraph withdraws it.
  • Block-frame decorations are not drawn. A block-frame-breakable's deco is a lang-side callback this backend cannot run, and packages use the construct for section bodies, list items and quotation blocks as readily as for anything with a rule around it, so .frame is a plain grouping element with margins. The class is there to restyle.
  • load-pdf-image shows a labelled box. Rasterizing an embedded PDF page is out of scope for an HTML writer, so it keeps the right size and says what it is rather than emitting a broken image.
  • A draw-text run's text follows its drawing instead of sitting at its point inside it: HTML content cannot live inside an <svg>, and there are no page coordinates left to place it at.

Markdown output

$ rustyfi --format markdown doc.saty   # -> doc.md

--format markdown is a subset of --format html. It reads the same pre-page-break block stream and recovers the same structure through the same code — headings from register-outline, lists from the list-mark boxes, tables from a tabular's own cell positions, links, emphasis, the CJK spacing rule, the line breaker's own hyphens. It then writes GitHub-flavoured Markdown, which can say much less.

Readability is the goal; layout fidelity is explicitly not. Nothing here tries to look like the PDF. What it tries to be is a document you would be willing to read in a terminal, paste into an issue, or feed to a diff.

What survives: #..###### headings, -/1. lists with real nesting, *emphasis* and **strong**, GFM pipe tables, [text](url) links, fenced code blocks, GFM [^1] footnotes with their definitions collected at the foot, and reference-style images.

Two things come out better than in HTML, both because a fence is a stronger container than a <p>:

  • a code block keeps its indentation. In HTML it is lost, because the inline-skip carrying it collapses like any other glue. Here it is divided back into columns by the fixed-pitch character advance measured from the block's own runs — code.satyh sizes the indent in exact multiples of it, so this recovers the source's own column count rather than estimating it;
  • a footnote is a real footnote, [^1] plus a definition, rather than an <aside> wedged after the paragraph because there is no page foot left.

Detecting a code block is also stricter than HTML's "every run is fixed-pitch", which misses every +code block containing Japanese — a fixed-pitch Latin face has no CJK glyphs, so those characters are set in the document's own face and the paragraph reads as mixed. Markdown keys on the structure instead: code.satyh ends every source line with an inline-fil, and justified prose ends only its last line that way.

The three decisions with no good answer

  • Math has three renderings, and a flag to choose between them — see How math is written below. It is the one decision here whose right answer depends on where the file will be read rather than on what the document says.
  • Graphics become [graphic]. There is no Markdown for a vector drawing, and dropping them silently is the worst of the options: a reader of xpath's manual would see paragraphs referring to figures that are not there, with no indication anything was missing. So each one leaves a named hole a reader can act on. Drawings whose INK is under 4pt in either dimension are dropped instead — the corpus is full of hairline rules, leader dots and heading underlines drawn as one-off graphics, and marking each of those would bury the real figures.
  • Images are reference-style, with a data: URI definition at the foot. A compile produces ONE output path, so a sidecar directory would be a contract the CLI does not have and would break the moment the file is moved or pasted. Reference style is what keeps the prose legible: a figure is commonly a hundred kilobytes of base64, and a paragraph interrupted by two screens of it is not a readable file. ![image 1][md-img-1] in the text, the payload at the bottom. Data URIs render in VS Code, Typora, pandoc and most local previewers; GitHub's image proxy refuses them, so there an image degrades to its alt text rather than to a broken path.

An aligned equation is not a table

The math package builds +align — its multi-line equation block — out of a tabular, so an aligned equation and a spreadsheet reach the backend in the same box. Rendered literally, a two-row +align came out as a GFM pipe table whose column heading was an equation: GFM's delimiter row always follows row one, so the first line of the alignment was promoted to a header.

An aligned equation is recognized by its construction rather than by resemblance — it draws no rules, every cell's only ink is an equation, and its columns run right, left, right, … (the inline-fil placement +align uses, and exactly the column pattern LaTeX's aligned is defined as). A grid that draws its own lines, one with text in any cell, or one whose cells are centred — a matrix — is a table and stays one.

What is written instead depends on what the mode can say:

  • --katex writes one $$\begin{aligned} … \end{aligned}$$. The cell boundary is the & and the row boundary is the \\, so the document's own alignment survives exactly, including the second and later column pairs of a multi-column +align;
  • --svg-math / --svg-outline-math write one block per row, with the row's cells joined — a row is one equation split at the alignment point — each centred like any other display equation (below). The column alignment between rows is lost: keeping it would mean re-deriving the solved grid geometry into a composed drawing, to buy an alignment that only exists for a reader whose renderer keeps the <svg> at all;
  • --unicode-math keeps the grid. It writes characters, and a two-column text table is a defensible way to show an alignment in plain text — but the grid now gets an empty header row, so no equation is promoted to a heading. GFM has no headerless table, and an empty header is the only way to say it.

The block structure does not depend on whether download-fonts.sh has been run: with no font store a drawing mode degrades to characters, but that is a degradation of one equation's rendering, not of the document's shape.

A displayed equation is centred

In the drawing modes a display equation — one that is the whole of its paragraph, which is what "displayed" MEANS in the box stream — is wrapped in <div align="center">.

This is the one exception to "alignment is dropped", and it is a consequence of that rule rather than a hole in it. A drawn equation is already raw HTML: the <svg> is in the file whatever this decides, so a wrapper around it costs nothing in portability — a renderer that strips the <div> has necessarily stripped the drawing too. Prose has no such standing, and centring a paragraph would mean putting HTML into a file that had none. The alignment is also one the document really asked for, and the HTML backend already honours it (data-align="center"); dropping it here made the two backends disagree about the same recovered fact.

align, not style, deliberately: GitHub sanitizes rendered Markdown through html-pipeline's SanitizationFilter, whose allowlist carries align for any element and carries style for none, so <div style="text-align:center"> arrives as a bare <div>. The attribute is deprecated in HTML5 and every browser still implements it; the sanitizer is the binding constraint.

The other two modes are untouched. --katex writes $$…$$, which a KaTeX reader centres itself (.katex-display { … text-align: center; }) and which GitHub reads as math only while the $$ block stands alone — a wrapper would turn the equation into literal text there. --unicode-math is the plain-text mode and stays text.

What does not survive

Everything Markdown has no way to say is dropped, not approximated:

  • frames, decorations and borders — a blockquote is not a frame;
  • alignment — \align-center is a pair of inline-fils and there is no alignment syntax; nothing about the text depends on it. The one exception is a DRAWN display equation, which is already raw HTML and so can be centred for free — see A displayed equation is centred;
  • page breaks, running heads and folios — already absent from the pre-page-break stream, and meaningless once reflowed;
  • colour, font and size — no styling syntax outside emphasis and code;
  • a paragraph's recovered indentation — four leading spaces is an indented CODE BLOCK, so reproducing it would be a lie. This is what the HTML backend uses to give the third-party enumitem its nesting, so an enumitem list arrives here as flat paragraphs. Its numbered labels ((a), (i)) are typeset text and survive; its drawn bullets are graphics below the size threshold and do not;
  • table rules — GFM has one table style, and no alignment colons are emitted either: a cell records where it was PLACED, not how its column was declared to align;
  • in-document anchors — a \ref becomes plain text rather than a link. Markdown has no anchor scheme, and renderers invent heading anchors from the heading's own words, so [Section 3](#sec:intro) would go nowhere. The cross-reference text the document typeset is already what a reader needs.

One known rough edge: a one-line +code block that also contains non-Latin text satisfies neither code-block test — it is not all fixed-pitch, and a single line is trivially "all its lines end with a fil", which is true of every one-line paragraph in the document. It comes out as inline code spans rather than a fence. Nothing is lost, and a fence would cost false positives on every short sentence that mentions a \command.

--format md is accepted as an alias for markdown.

LaTeX output

$ rustyfi --format latex doc.saty   # -> doc.tex
$ lualatex doc.tex

--format latex writes a complete, compilable .tex document — \documentclass, a preamble, \begin{document} … \end{document} — not a fragment to paste into one.

It is the same recovery as the other two backends, reading the same pre-page-break block stream through the same code. What differs is that the target is another typesetter rather than a reader or a browser, and LaTeX can say most of what SATySFi can. So where HTML and Markdown drop or approximate, this mostly does not:

markdown html latex
math characters, or drawn drawn <svg> real $\frac{a+b}{c}$
drawings an <svg> a sanitizer strips an <svg> a tikzpicture of the same paths
a \ref plain text <a href="#…"> a working \hyperlink
a label inside a drawing flows after it absolutely positioned a \node at its own point
table rules none — GFM has one style per-cell CSS `
a code block a fence a <pre> fancyvrb's Verbatim
CMYK colour — converted, lossily xcolor's own cmyk

Layout fidelity is not the goal, and cannot be: LaTeX breaks the lines, hyphenates and paginates itself. What is carried over is the document's paper size — so a slydifi deck comes out as landscape slides rather than reflowed onto A4 — and its measure, taken from the widest line in the flow.

Which engine

The generated preamble says, in a comment at the top of the file, and enforces it with iftex so a wrong engine fails immediately instead of dropping glyphs:

  • Nothing above Latin-1 → it compiles under pdflatex, xelatex and lualatex alike. The mathematics is written with amsmath/amssymb command names rather than Unicode characters, and the only engine-conditional line is an \ifPDFTeX-guarded fontenc.
  • Any CJK → lualatex, with luatexja-fontspec and the Harano Aji faces. pdfLaTeX cannot set CJK at all; XeLaTeX could, through xeCJK, but a generated file can only name one and luatexja is the one that also gets the JLreq inter-script spacing right.
  • Anything else above Latin-1 — Greek, Cyrillic, Hebrew, Arabic, an emoji, a bare ≤ in prose — → xelatex or lualatex, and pdflatex is refused with a named error rather than left to fail once per character. Note the honest limit here, which the preamble also states: a Unicode engine can ADDRESS those characters, but the default font may not contain them, and TeX reports a missing glyph as one log line and then exits 0. If a character is absent from the PDF, add a fontspec main font that covers the script. The backend does not pick one, because picking wrong is worse than saying so.

The preamble declares only the packages the body turned out to use — tikz, hyperref and fvextra appear only if the document has a drawing, a link and a code block respectively — so you can tell from the top of the file what is in the rest of it.

What survives

Headings (\section*…\subparagraph*, starred because the document typeset its own numbering and LaTeX would otherwise add a second), itemize and enumerate with real nesting, tabular with the rules the document actually drew, \emph/\textbf, \texttt, \footnote, \href, \hyperlink cross-references to \hypertarget anchors on the headings, Verbatim code blocks that keep their indentation, and tikzpicture figures drawn from the same vector paths the PDF writer strokes.

Every character LaTeX reserves — # $ % & _ { } ~ ^ \, plus < > |, which are only correct under a stated font encoding — is escaped. That is not a nicety: a bare % comments out the rest of the line and the document still compiles, so 100% of them would silently lose the other half of its sentence.

What does not

  • Raster images are a sized, dashed placeholder, labelled [image n]. A compile produces one output path, so writing the pictures out as sidecar files would be a contract the CLI does not have and would break the moment the .tex is moved; LaTeX has no data-URI equivalent, because \includegraphics reads a file and nothing else. The placeholder is the size the image occupied, so the page around it stays honest.
  • Frames, decorations and alignment are dropped, as in the other reflowed backends. LaTeX has boxes, but a frame's geometry was computed for a measure this document is not being set at.
  • Rule thickness and colour in a table: \hline has one width for the whole table and no colour without colortbl. Which boundaries are ruled is kept; how heavily is not.
  • Column alignment is l throughout. A cell records where it was placed, not how its column was declared to align, so anything else would be a guess — the same reason the Markdown backend emits no alignment colons.
  • A drawing bigger than the measure is scaled down to fit. Not a preference: a tikzpicture is one unbreakable box, and LaTeX responds to one taller than \textheight by ending the page and trying again, forever.

Known wrong, as opposed to known absent

Everything above is a deliberate simplification. These are cases where the output is silently wrong or does not compile, found by an adversarial sweep and listed so that a reader comparing the .tex to the PDF finds them here rather than discovering them:

  • a footnote is numbered twice under stdjabook/stdjareport — the note body already opens with the numeral the document typeset, and \footnote adds its own (the reference marker is already dropped);
  • a footnote inside a table cell loses its text, and a table nested inside a table cell is emitted before its parent rather than inside it;
  • a list nested five deep is Too deeply nested — four is LaTeX's own limit for itemize/enumerate, and it is not raised;
  • coordinates or a paper size past \maxdimen (about 5.76 m) fail; TikZ evaluates a coordinate before applying the fit scale, so the scaling that saves an oversized drawing does not save these.

Math is --katex's conversion — the same function, so What --katex cannot recover applies here word for word. All four math flags are refused with --format latex rather than ignored: a .tex reaches a math typesetter by definition, so it always writes the LaTeX --katex asks for, and every other rendering would only lose structure it can keep.

--format tex is accepted as an alias for latex.

How math is written

${\frac{a}{b}} is parsed, elaborated, evaluated and laid out during compilation. What reaches a backend is a flat list of glyphs with coordinates plus a few filled paths for the fraction bar and the radical sign; there is no \frac node anywhere, and no backend can serialize one. So every rendering below is a recovery from geometry, and which one you want depends on where the file is going to be read.

markdown html what it emits
--svg-math default ✔ SVG <text> + <rect>/<line>, positioned by the layout
--svg-outline-math ✔ default an outline <path> per glyph, characters kept behind it
--katex ✔ ✔ LaTeX in math delimiters
--mathml ✔ ✔ MathML Core elements, laid out by the browser
--unicode-math ✔ — the characters, in reading order

The five are mutually exclusive, and all five are an error with --format pdf, which typesets the equation itself. The defaults differ by format on purpose: an HTML page is self-contained and nobody reads it as source, so it gets the rendering that reproduces the PDF exactly and depends on nothing the reader has; a .md is read as source at least as often as it is rendered, so it gets the compact one whose source says what it means.

--svg-math: text and shapes — Markdown's default

Each glyph is an SVG <tspan> at the position the layout computed, all of them in one <text>; each fraction bar and rule is a <rect> or a <line>. The text is real text — it selects, copies, searches and reads aloud with no invisible layer behind it — and the source says what it means:

<svg … viewBox="0 0 38.95 12.08" style="overflow:visible; vertical-align:-2.41pt;">
  <rect x="0" y="4" width="20" height="0.48" fill="rgb(0,0,0)"/>
  <text class="math-text" style="font-family:'Latin Modern Math', …;font-size:12px;">
    <tspan x="0" y="8.54">∀</tspan><tspan x="7.99" y="8.54">𝜀</tspan> <tspan x="18.08" y="8.54">:</tspan>
  </text>
</svg>

Two costs, both real:

  • it depends on the reader having the document's faces. Every glyph is positioned absolutely, so a substitute whose advances differ does not reflow — it collides. The family is named inline, so a reader who has Latin Modern Math gets exactly the PDF's glyphs and one who does not gets a near miss;
  • a MATH-table variant glyph has no character that names it. A display-size ∑, a stretched delimiter and an ssty script form are addressable only by glyph id, and <text>∑</text> draws the base glyph — whose ink is a different size, while the limits around it were centred on the variant's advance. So those glyphs keep an outline <path>, with their character carried invisibly beside it. On latexcmds that is 27 paths against 51 <text> runs: the exception is small, and skipping it would silently reintroduce a measured misplacement in exactly the equations most likely to be displayed.

Verified against the mode below, which an audit compared glyph-for-glyph with the rasterised PDF: across the corpus's 100 math boxes, every glyph lands at the same coordinate and carries the same characters in both modes.

Displayed equations are pretty-printed; inline ones are not, and that is a CommonMark constraint rather than taste. A display equation is its own HTML block, so a multi-line <svg> satisfies rule 7 and passes through whole. An inline one sits mid-paragraph, where a renderer with breaks: true — many Markdown pipelines, including this repo's own playground preview — inserts a <br> at every newline, breaking the drawing. Neither shape ever contains a blank line, which would terminate the HTML block in every implementation.

--svg-outline-math: outlines — HTML's default

Each glyph is drawn as a <path> taken from the document's own face, at the coordinates the layout computed. This is what the PDF draws, so it is the only mode that reproduces it — and because the outline travels with the file, it renders the same for a reader who has never heard of Latin Modern Math. A <text> naming the face would not: measured on \forall \epsilon \: \exists \delta at 12pt, the port reserves 7.992pt for ∀ where a substituted face draws 12.000, so ε lands inside the quantifier.

The characters are kept behind the drawing as invisible <text>, so an equation can still be selected, copied, searched with the browser's own in-page find, and read aloud by a screen reader. That is verified in a real headless browser rather than assumed.

The cost is size — an outline is hundreds of coordinates per glyph. On latexcmds, Markdown's math-heaviest document, it is 2.3× the default raw and 2.2× gzipped. In HTML, where nothing strips markup and the page is meant to be self-contained, that is the right trade and it is the default.

--unicode-math: the characters

$ rustyfi --format markdown --unicode-math doc.saty

The glyphs sorted by their own x offsets and written out, with the two-dimensional structure recovered as far as Unicode can say it: scripts become superscript/subscript characters where one exists (x², ∑ₐᵇ) and ^q/_q where none does; fractions are split at the bar — which survives as a wide flat fill — into (a+b)/(c+d), nesting included; and delimiters and radicals, which are drawn as paths and have no character in the run at all, come back as (x+y)², ⌊x⌋, ‖v‖ and √(a+b) — see what --katex recovers from the drawn paths, which is the same recovery.

This is the only form that is text: it survives a sanitizing renderer, it reads in a terminal, grep finds it, and it needs nothing of the reader at all. Markdown-only, for the same reason — an HTML page is markup by definition and can always draw the real thing.

--katex: LaTeX in delimiters

$ rustyfi --format markdown --katex doc.saty
$ rustyfi --format html --katex doc.saty

$…$ and $$…$$ in Markdown, which is what GitHub, Pandoc, VS Code and Typora read; \(…\) and \[…\] in HTML, which is what KaTeX's auto-render and MathJax enable by default — neither turns on $…$ for inline math without configuration, so emitting it into a web page would show a literal dollar sign on a reader's default setup. An equation that is the whole of its paragraph is written in the display form.

It is a re-derivation, not a round trip. What comes back: fractions — nested ones included — delimiters, radicals, scripts and limits grouped correctly (\sum\limits_{k=1}^{n}), around 180 symbols by name, accents as their commands, prose inside an equation as \text{…}, and the alphabet of a styled letter — ℝ really does come back as \mathbb{R}, because SATySFi writes the style into the codepoint.

What --katex recovers from the drawn paths

\paren, \sqbracket, \brace, \floor, \ceil, \abs, \norm, \angle-bracket and \sqrt have no character anywhere in the box stream — math-paren and math-radical draw them as Fill and Stroke paths. They are recovered from the SHAPE of the path: a delimiter is told from a rule by being tall and narrow, its family by whether the outline curves, where its arms are and whether its outer edge has a cusp, and its handedness by which side of its own bounding box it is thick at at mid-height. The two halves of a pair find each other by their vertical extent, which math-paren gives them identically. A radical is exact rather than inferred: its sign and its overbar share a left edge and a top edge to the last bit, because the layout builds both out of the same two sums.

So ${\paren{a+b}^2} comes back as \left( a+b \right)^{2}, and ${x = \frac{-b \pm \sqrt{b^2-4ac}}{2a}} as the quadratic formula. A shape that matches none of the signatures — a third-party package's own math-paren argument — still GROUPS its body, as {…}: no delimiter is invented, and the script after it still binds to the whole group, which is the part that was actually wrong.

What --katex cannot recover

Every item here is information the box stream does not carry, not a gap in the writer:

construct what you get instead why
a matrix, or rows aligned INSIDE one ${…} the cells, in x order the arrangement is carried by position, and no bar delimits it. (+align is a different thing — a real tabular, and it is recovered; see An aligned equation is not a table)
\sqrt[n]{x} a plain \sqrt{x} the layout carries the degree and deliberately does not draw it, so it is not in the box stream at all
\lim, \sin, \max the letters, in math italic — the LIMIT on one is recovered, the operator's name is not, unless the two appear together a MathOp run reaches the box stream as plain ASCII letter records, the same as a product of variables. Where a centred limit proves the run is an operator and the letters spell one, \lim\limits_{x\to0} does come back
a \setsep separator dropped; the two parts run together its bar is drawn by the same shape an \abs uses, so pairing it would close the wrong group
x^{2^{3}} x^{23} a script of a script is another small raised glyph, and nothing marks where one script's group ends
a fraction nested in BOTH halves of another, at equal width the two inner halves may swap \frac{\frac{a}{b}}{\frac{c}{d}} puts b and c at the same dy and the same dx; there is nothing left to tell them apart
\text{…} recovered only when the run holds a space the layout splits a run at each glue, so a \text of separate words arrives as separate records
\, \; \quad approximated all of them are "a gap over the threshold" by then
colour dropped not measurable back

Anything whose name is not in the symbol table falls through as the character itself, escaped where LaTeX reserves it — never a guess, never nothing. Four things it deliberately does not do, each found by running it over the corpus rather than over fixtures: it does not re-emit the spacing LaTeX inserts itself (x + 1 is emitted as x+1, which typesets as x + 1), it does not let a control word swallow the next letter (\partial + t would concatenate into an undefined command), it does not let two inline formulas run their delimiters together into a stray $$, and it does not read a script as a LIMIT merely because its midpoint happens to coincide with a run of base glyphs — ${x^2+y^2+z^2-xy-yz-zx} is exactly that coincidence.

--mathml: structure the browser lays out

$ rustyfi --format html --mathml doc.saty
$ rustyfi --format markdown --mathml doc.saty

The equation becomes MathML Core in the document's own tree — <mfrac>, <msub>, <msubsup>, <munderover>, <mover accent="true">, <mi>, <mn>, <mo>, <mtext> — and the browser typesets it. Nothing is loaded and nothing runs, unlike --katex; the equation is real structure rather than a picture, unlike either SVG mode, so a screen reader reads it as mathematics and the browser's own in-page find works on it.

<p class="para math-display"><math xmlns="http://www.w3.org/1998/Math/MathML"
   class="math-ml" display="block"><munderover><mo movablelimits="false">∑</mo
   ><mrow><mi>𝑘</mi><mo>=</mo><mn>1</mn></mrow><mi>𝑛</mi></munderover><mi>𝑘</mi></math></p>

MathML Core, not MathML 3. Core is the profile browsers actually implement — Firefox always, Safari since 2013, Chromium since 109 — and its layout is specified in CSS terms. Two of its restrictions shape the output and both look like omissions until you know why:

  • mathvariant has one legal value in Core, normal. It is not needed: SATySFi writes the style into the codepoint (${\bold{R}} is laid out as 𝐑 U+1D411), so bold, script, fraktur and double-struck survive as themselves. What the attribute is used for is the opposite case — a plain ASCII x reaching a backend is a letter the document set upright, since math italic would have been written as 𝑥, so it is pinned with mathvariant="normal" against Core's automatic italicisation of a lone letter.
  • movablelimits is pinned off on every operator base. The dictionary marks ∑ and friends movable, so a browser would re-decide whether their scripts go beside or under according to the display style — overwriting a position this port measured. \sum's limits are centred and come out <munderover>; \int's are set beside and come out <msubsup>; both stay put.

An equation alone in its paragraph is display="block", which is not decoration: in block display a browser sets math-style: normal, putting a big operator's limits above and below at full size. Several math boxes in one paragraph merge into one element — a formula is not one box.

It is the same re-derivation --katex is, from the same recovery, so the table above applies to it unchanged. Two things it does recover that --katex structurally cannot, because MathML has an element for the shape: an accent binds to its base (<mover accent="true"> rather than x\hat{} side by side), and a centred limit stays a limit on any base (\limits is legal in LaTeX only after a large operator).

What --mathml does about what it cannot recover

Nothing is invented. No <msqrt>, <mroot>, <mtable> or delimiter <mo> is ever synthesized: every element written stands for something the recovery actually found. An <msqrt> guessed from "there is a wide flat fill here" would render as a fact, and confident-looking MathML for a mis-recovered construct is worse than visibly rough text, because it reads as authoritative.

What is done instead is to mark it. A <math> whose rendering this layer knows does not match the PDF carries class="rustyfi-approx", for one of two detectable reasons: an inked path that did not become a fraction bar (a math-paren delimiter, a radical sign, an \overline — drawn in the PDF, with no character to recover and nothing in Core that draws a path), or an accent with no base in its run, which is emitted over an empty group and so renders beside its character instead of over it. The class has no styling of its own; it exists so the loss is countable:

$ rustyfi --format html --mathml latexcmds-doc.saty && grep -c rustyfi-approx …

Measured: 6 of 48 equations in latexcmds, 279 of 561 in azmath — and in azmath 232 of those are one shape, its accent.satyh building every accent out of math-graphics and two draw-texts, so the base and the mark arrive as separate math boxes that cannot be paired. Degrading a marked run to plain text instead was tried and rejected on that measurement: it would demote correctly recovered fractions, scripts and limits along with the parenthesis it cannot put back either way.

In Markdown it is raw HTML, so it shares the SVG modes' constraints: a sanitizing renderer strips it, and every element is written on one line so that a renderer with breaks: true cannot inject a <br> into it and no blank line can ever terminate the HTML block. Verified end to end against marked with breaks enabled, across latexcmds and azmath: 609 elements in, 609 out, no <br> inside one and nothing escaped to literal text.

Size, on the same documents, against the outline mode:

latexcmds md html azmath md html
--svg-outline-math 1.00x 1.00x 1.00x 1.00x
--svg-math 0.43x 0.70x 0.40x 0.56x
--katex 0.16x 0.51x 0.03x 0.15x
--mathml 0.20x 0.53x 0.11x 0.19x

Gzipped the four sit at 1.00x / 0.45x / 0.25x / 0.27x on latexcmds Markdown — MathML is a little larger than the LaTeX it is derived from, which is the cost of being markup rather than a language.

Editor support

rustyfi lsp is a Language Server Protocol server speaking over stdio. Point your editor's LSP client at it for the satysfi language:

$ rustyfi lsp                # detect each file's generation from its own text
$ rustyfi lsp --lang 0.1     # analyse everything as 0.1

It answers diagnostics, hover, go-to-definition, completion and symbols — for both SATySFi generations, and on half-typed buffers.

Diagnostics

Lex and parse errors are reported for any buffer at all, under whichever SATySFi generation the file is written in. Both 0.0.6 and 0.1 are supported, and the generation is chosen per file the same way a compile chooses it for the entry document — a use header or a val head selects 0.1, a @stage: header or a let-* head selects 0.0, and a file that signals neither is checked against both rather than guessed at. Measured against every .saty/.satyh/.satyg file in this repository — 247 of them, 64 of which are 0.1 — it reports no diagnostics at all on files that compile, in 0.56 s for the whole set (30 ms worst case).

An analysis is also bounded: both grammars backtrack exponentially on some half-typed inputs — 11.5 seconds on one 14 KB buffer, and climbing — so a parse caps how much backtracking it may do and says so plainly when it hits the cap, rather than freezing the editor. rustyfi itself does the same, with a larger cap that scales with the file: a compiler is asked once and can afford to try harder than an editor asked on every keystroke, but neither should run forever. A parse stopped by the cap is reported as having given up, never as a syntax error.

Type errors are reported for a document whose program can be resolved. A type error in SATySFi is a property of a whole program, not of a file — the entry document plus every @require:d package, in dependency order — so the server resolves that program first, exactly as a compile does (rustyfi-loader against the same library roots, then elaboration, typechecking and :> seal checking; it stops before evaluation, so no fonts and no pages). The buffer's own text stands in for its file, so unsaved edits are what gets checked.

Three things follow from doing it that way, and each is deliberate:

  • When the program cannot be resolved, nothing is reported. No library root configured, a @require: naming a package that is not installed, a use header document (whose packaging mode resolves dependencies from a pre-solved rustyfi-deps.yaml and has no seam for an in-memory buffer): all of these fall back to the parse tier and say nothing. A wall of "cannot resolve" on a file that is not at fault is worse than silence.
  • Library buffers are parse-only unless you ask. rustyfi lsp --check-libraries typechecks a .satyh/.satyg too, as a dependency of a synthetic document carrying its own headers. It is off by default because SATySFi's global-merge module model lets a library use a module it never @require:s — satysfi-base's tabular2.satyh calls Color.black and requires only list and table — which is valid and cannot typecheck alone. Swept over every library this repository ships, 76 of 77 bundled packages and 68 of 68 resolvable corpus sources check clean; the exceptions are listed by name, with reasons, in crates/rustyfi-lsp/tests/project.rs.
  • An error from another file is not drawn on yours. Spans in this port carry no file identity, and the program under analysis is a merge of many files, so a span is only trusted when its own (line, column, byte) triple matches this buffer. Otherwise the diagnostic goes to the top of the file and says where it really came from.

The cost is the reason the two tiers are separate: a parse is under a millisecond, while resolving and typechecking a real document is 2 ms for a two-file one and 100–200 ms for one with a full document class behind it (28 files, release build). --no-typecheck turns the whole-program tier off.

Hover, go-to-definition and completion

All three answer from one cursor → syntax mapping over the buffer, and all three under the same rule: say only what the file proves.

  • Hover names what is under the cursor — an inline command, a module, a variant constructor, a record label — and, when the file binds it, how it was bound and on which line. Where the author wrote a type (an ascription, a sig's val, a synonym) it is shown, quoted from the buffer; no type is ever inferred, so none is ever wrong. A name that comes from a @require:d package still gets an answer, and that answer says it comes from elsewhere.
  • Go to definition jumps within the file, honouring shadowing, the five identifier namespaces (\cmd, +cmd, math \cmd, values, types) and Module.member paths, and it jumps from a @require:/@import: header to the file it names — resolved by the compiler's own loader, so the editor cannot disagree with the build. Where it cannot be sure it returns nothing: an open of a module the file cannot see makes every name bound before it unresolvable, because that open may be shadowing them.
  • Completion offers names actually in scope, and is deliberately quiet. \ in inline text offers inline commands, \ inside ${…} offers math commands, + offers block commands, M. offers M's own members, and a bare word in prose offers nothing at all.

All three keep working on a buffer that does not parse — and on one that does not even lex, which is what {\emp is the moment you start typing a command: everything written before the break is still answered about.

Symbols

Symbols fill the outline pane, the breadcrumb and "go to symbol", for one file (textDocument/documentSymbol) and across the project (workspace/symbol). Both generations' declaration forms are covered — 0.0.6's let/let-rec/let-inline/let-block/let-math/let-mutable/ type/module … : sig … end and the direct items in a signature, 0.1's val family with its ~/persistent ~ stage qualifiers, type, signature, include and nested modules, and both header families. A module's members are its children, so a library folds down to one entry rather than thirty. Over the same 247-file corpus the outline extraction finds 9,843 declarations in 1.2 s, and the only file that yields nothing is the one that is zero bytes long.

The walk is deliberately structural — no name resolution, no types, no following @require: — so it cannot produce a wrong answer, only an incomplete one, and it works on a half-typed buffer: it reads the top-level declaration sequence one declaration at a time, so an unfinished let at the bottom of the file costs you that one symbol rather than the whole outline.

Configuration

--lib-root <dir> (or $RUSTYFI_LIB_ROOT, or the client's initializationOptions.libRoot) serves both halves that need one: following a @require: header to its package file, and resolving a buffer's dependency graph for the type tier. @import:, being relative to the importing file, needs no configuration. initializationOptions accepts lang, libRoot (a string or an array), checkLibraries and typecheck, with the command line winning wherever both speak.

As a library

Everything except the whole-program tier and workspace/symbol is also available as a plain library function, with no LSP types in its signature, no filesystem access and no default features needed — rustyfi_lsp::analyze(source, lang) -> Vec<Diag>, rustyfi_lsp::document_symbols(source, lang) -> Vec<Symbol>, and build_model / hover / definition / completions. So a browser editor compiled to wasm32-unknown-unknown gets exactly what the desktop one does. The two exceptions are where the filesystem enters: the whole-program tier is rustyfi_lsp::project::check, behind the (default-on) typecheck feature, and searching a project for a symbol means reading it, so that part lives in the server half.

Performance

Minimum CPU time over three interleaved runs against SATySFi 0.0.11, all five configurations measured in one pass (benchmark.py):

doc pages rustyfi cold rustyfi cached SATySFi --bytecomp warm aux
latexcmds 12 0.22 s 0.08 s 1.07 s 1.04 s 0.67 s
enumitem 27 0.96 s 0.12 s 2.54 s 2.33 s 1.46 s
easytable 19 1.34 s 0.14 s 2.91 s 2.85 s 1.19 s
figbox 21 1.28 s 0.16 s 2.55 s 2.43 s 1.12 s
slydifi 30 1.21 s 0.13 s 1.74 s 1.28 s 1.16 s
xpath 11 3.00 s 0.10 s 9.49 s 2.65 s 3.37 s

Known gaps

  • Fonts are named by file or hash entry, not by package: a document asking for fonts-junicode:Junicode-Bold falls back to a name heuristic.
  • Cross-version deco crosses both ways now, including through optional arguments and nested module signatures — but not through an open optional row (nothing names the labels to forward) or a functor signature member.
  • font and 0.1's paren cross in neither direction, and no bridge would change that: both are representation forks rather than missing features. 0.0.6 has no font type at all, and 0.1's paren takes a context where 0.0.6 takes three explicit scalars, with no way to recover the axis.
  • A 0.0.6 package that WRITES code in a type declaration is refused rather than crossing: 0.0.6 has no code spelling, so that text would silently acquire 0.1's meaning on the way in. Ordinary staged exports — the inferred kind, from &e — are unaffected and cross both ways.

The manual

The manual is written in SATySFi and typeset by the port itself, so every feature it uses is one that has to keep working.

$ make -C manual        # manual.pdf, logo.pdf, logo.png

Development

crates/
  rustyfi-syntax/         mode-stack lexer and grammar (CST) for both dialects
  rustyfi-lang/           elaboration, typechecker, evaluator, primitives
  rustyfi-backend/        boxes and glue, line and page breaking, math
  rustyfi-loader/         @require/@import resolution and load order
  rustyfi-pdf/            PDF writer, font embedding
  rustyfi-html/           HTML and Markdown output, and the structure
                          recovery all three reflowed backends share
  rustyfi-latex/          LaTeX output: a complete, compilable .tex document
  rustyfi-satyrographos/  package manager
  rustyfi/                the binary
lib-rustyfi/              bundled packages: dist/ (0.0) and dist-v01/ (0.1)
layout-tests/             layout fidelity gate, corpus, probes, measurement
install.sh, download-fonts.sh, benchmark.py

License

MIT — see LICENSE.

Two sets of files bundled here are not covered by it and keep their own terms. The fonts download-fonts.sh fetches carry the IPA Font License v1.0, SIL OFL 1.1, the GUST Font License and DejaVu's, each copied next to the font it covers. The SATySFi packages under lib-rustyfi/ are upstream's, LGPL-3.0.