In the wild — RAG Converter uses rusty_alloc as the allocator, in wasm too. It makes personal and work files AI-readable without them leaving the machine: the whole conversion runs as WebAssembly in the browser tab, with nothing uploaded and nothing to install.

rusty_alloc

A pure-Rust remake of mimalloc — the v2.4.5 architecture (32 MiB segments, free-list-sharded pages, lock-free cross-thread frees), rebuilt from the design rather than transliterated from the C. No C anywhere in the product; the C mimalloc is a development-only differential oracle and is never a dependency.

Status: 1.0.0 — the API is frozen; changes follow semver from here.

Upgrade from 0.3.x or earlier — mandatory. 0.4.0 fixed three platform-independent use-after-frees on the abandon → adopt → reuse path. Treat 0.3.2 and earlier as unsound on every target.

Tested on x86-64/aarch64 Linux, aarch64/x86-64 macOS and x86-64 Windows; executed on wasm32-unknown-unknown (Node VM self-test, no emscripten).

What it is

• ~150 of mimalloc's ~157 mi_* entry points, semantics-for-semantics, gated against the C implementation as a differential oracle.
• A double free is detected and aborted, on both the owner and cross-thread paths. Upstream mimalloc accepts it silently in release builds; handing the same block to two owners is the failure this project exists to prevent.
• Runs on WebAssembly via memory.grow, with no C toolchain.

Performance (instruction counts, not seconds)

Measured deterministically via callgrind instructions retired, x86-64 Linux, LD_PRELOAD. Side-by-side against the field (ratio = our instructions ÷ theirs; lower is better):

We match mimalloc and come in 2–15% under jemalloc (jemalloc 5.3.0) across all three real programs, and ~17% under glibc.

The per-operation scan (small/med/big/large/huge, calloc, realloc, aligned, usable, batch and mixed working-set ops) measures below mimalloc on all 13 operations. Per-op ratios vs mimalloc: med 0.47, small 0.49, aligned 0.50, realloc 0.51, small_touch 0.51, big/large 0.53, calloc 0.63, mixed 0.67, usable 0.73, batch lifo/fifo 0.89, huge 0.01.

Five of those hold ONE BLOCK LIVE at a time, so the page empties on every free and what they measure is page retire-and-recarve rather than steady-state service. On workloads with a real working set — the honest number for a program — it is liveset 0.92 (65,536 live objects, random victim replaced each step), shbench 0.91 (bulk batches released in waves) and xthread 0.83 (every free performed by a non-owning thread). Wall-clock time is deliberately not claimed: the measurement box cannot resolve it above its own noise floor, and instructions are not seconds.

Batch is the narrowest margin, and it is the one with a story. It sat at 1.008 after a ThreadSanitizer fix made a page-flags byte atomic, which costs exactly one instruction because LLVM will not fold an atomic load into a test's memory operand. That trade was kept — upstream reads the same byte non-atomically and has the race — and the instruction was won back elsewhere on the same path rather than by undoing it.

free's fast path is 21 instructions against mimalloc's 25, down from 27. The used-- codegen floor docs/opps.md recorded is closed: it took five instructions from safe Rust because LLVM will not emit a memory-destination read-modify-write when the value must also drive a branch, and it is two now, written directly. Resolving a pointer to its page went from nine instructions to five on the back of a per-slice owner table in the segment header. The flags test is the single row where upstream is still cheaper, and it stays that way deliberately: closing it would keep the read atomic in hardware while hiding it from the sanitizer that found the race.

Correctness on real software: jq, sqlite3, python3, git, xz, zstd, lua and perl produce byte-identical output under rusty_alloc, mimalloc and glibc; the full mimalloc-bench corpus (19 configurations, including the 8–16-thread storms) runs clean; Miri is clean over the whole target.

Embedded: 2.0-3.7x faster than esp-alloc on an ESP32-S3

Builds no_std and runs as the #[global_allocator] on bare metal. Measured on a Seeed XIAO ESP32-S3 Sense at 240 MHz against esp-alloc 0.11 — nanoseconds per allocate/free pair, lower is better:

Both arms are one firmware source with --cfg picking the allocator, given equal budgets. A baseline arm with no allocator call measured 162 ns/op in both and is subtracted from every row. Blocks are touched through volatile reads/writes and folded into a checksum that matches across both arms, so the work is provably identical; the same benchmark run twice in one arm reproduced to the nanosecond.

An eight-test adversarial battery runs clean on both (boundaries, alignment, realloc chains, zeroing over dirtied memory, fragmentation, exhaustion); it found and fixed a real reclamation bug on the way, after which 512 B capacity no longer decays and churn NULLs fell from 22,533 to 357 per 50,000.

It costs RAM to get that. The smallest heap that runs the same workload is 68 KiB for rusty_alloc against 8 KiB for esp-alloc — a linked-list heap's floor is bytes live + header, while a size-class page allocator's is (classes touched) x (page size), independent of bytes requested. That floor is roughly fixed, so it amortises as the working set grows. Reach for esp-alloc when the budget is tight, and for this when throughput or fragmentation under churn is what hurts.

Usage

This crate is the allocator core. For the ergonomic Rust surface (GlobalAlloc, first-class Heap, the Allocator trait), use rusty_alloc-api.

Long-lived services should set purge_delay >= 0 — the configuration with flat, measured RSS. The shipped default leaves purging opt-in.

Security

Audited against the use-protection-please 41-gate hardening standard — 14 of 15 v1.0.0 gates met (the one open gate, H-27, is the 30-day continuous-fuzz soak: the nightly mechanism is live and clean, the soak completes 2026-09-19, and it ships under a time-bound owner waiver). The gate-by-gate table is at the bottom of this README; the residual-risk register (R-001..R-005, owner-accepted) and the two time-bound waivers are in the full checklist.

What the default build gives you:

• A double free aborts instead of putting a block on a free list twice — on both the owner and the cross-thread path.
• Foreign-pointer detection on free (debug / debug_checks builds), and a memory-safe core: unsafe isolated with a stated invariant on every block, undocumented_unsafe_blocks denied workspace-wide, Miri-clean.
• Mitigations tested for EFFICACY, not just function — tests/corruption.rs poisons a real free list and requires the process to die of SIGABRT (detected) rather than SIGSEGV (followed the poisoned pointer); a mitigation nobody has watched fire is a claim, not a defence.

Opt-in hardening for hostile-input services:

• secure — per-page encrypted free-list links plus a same-segment + alignment bound on every decoded link, so a link overwrite cannot steer the allocator to an out-of-heap target. Measured cost: a flat ~15 instructions per allocation (+0.6–1.8% whole-program).
• blockmap — a per-page block-liveness map that catches a forged link landing on an already-live block, the one thing that closes R-005 (encoding does not survive an attacker with a read primitive). Off by default on cost (~3× secure); switchable independently.

Reports go through SECURITY.md (private GitHub advisories). See the threat model and the unsafe inventory.

Features

Statistics counters follow upstream's MI_STAT rule: present in debug builds, compiled out of release.

The Remade With Rust ecosystem

Remade With Rust is an initiative by Mata Network to rebuild essential C and C++ tools in Rust — for the memory safety, the predictable performance, and the freedom of a permissive license. Each project is a reimplementation, not a fork: same wire protocols and file formats, new code you can actually depend on.

We build the core to production grade and open-source it so the community can extend it. No copyleft. No surprises. Just the tools we rely on, made faster and safer.

→ All projects: github.com/Remade-With-Rust

License

MIT. See LICENSE at the repository root.

Hardening status

Tier critical-path · Audited 2026-08-20 (survey) · v1.0.0 gates 14/15 · Full checklist

██████████████████░░ 94%  ·  34 Completed · 1 Scheduled · 1 Incomplete · 19 N/A

Next up — H-27 Continuous fuzzing with no open crashes (2026-09-19 (30 days from the nightly job's first run))

Architect — Tim — Mata Network