# rustrtc
[](https://crates.io/crates/rustrtc)
[](https://docs.rs/rustrtc)
A high-performance, full-stack real-time communication library — **WebRTC, RTP/SRTP, T.38 Fax, and UPnP NAT traversal** — all through a **unified `PeerConnection` API**.
## Features
- **High performance** — ~3.3× faster than `webrtc-rs` and ~3.2× faster than `pion` (Go) in throughput, with ~52% less memory than `webrtc-rs` (see the benchmark below).
- **Full protocol stack** — WebRTC, RTP, SRTP, and **T.38 fax** in a single library, plus **UPnP IGD** NAT traversal. Few moving parts, no missing pieces.
- **Unified `PeerConnection` API** — one interface for every transport mode (`WebRtc` ICE/DTLS/SRTP, `Srtp`, `Rtp`, and T.38). No fragmented APIs.
- **WebRTC compliant** — interoperable with Chrome/WebRTC and pion; offer/answer, renegotiation, rollback, and standard SDP attributes.
- **ICE restart** — `restart_ice()` for network migration / re-INVITE flows, with automatic detection of remote-initiated restarts (RFC 8445 §9).
- **Complete media pipeline** — packetizer/depacketizer (VP8, VP9, H264, Opus, G.711/G.722/G.729), jitter buffer, NACK/RTX, FIR/PLI, TWCC, and REMB for audio and video.
- **Bandwidth estimation (GCC)** — generates TWCC receiver feedback, stamps transport-wide sequence numbers on outbound RTP, and exposes a live `target_bitrate` estimate for encoder adaptation (`RtpSender::subscribe_target_bitrate`).
- **Full ICE** — STUN, TURN (UDP + TCP), ICE Lite, ICE TCP (RFC 6544), single-port UDP mux for SFU/WHEP deployments, and **mDNS candidate obfuscation** (`enable_mdns`).
- **NAT traversal & deployment** — RTP latching, UPnP IGD port mapping, and firewall-friendly port ranges (`rtp_start_port`/`rtp_end_port`).
- **Production extras** — RTP rewrite bridge (SSRC/PT/sequence remapping) and a WebRTC-compatible stats model.
## Benchmark (rustrtc vs webrtc-rs & pion) in 0.3.141
**CPU:** `Intel(R) Core(TM) i7-9700T CPU @ 2.00GHz` (8 cores)
**OS:** `Debian 13, 6.12.101+deb13-amd64`
**Compiler:** `rustc 1.97.1 (8bab26f4f 2026-07-14)`, `go version go1.24.4 linux/amd64`
```shell
cargo run -r --example benchmark
Comparison (Baseline: webrtc)
Duration (s) | 10.07 | 10.24 | 10.07
Setup Latency (ms) | 25.64 | 0.45 | 3.00
Throughput (MB/s) | 165.98 | 549.04 | 169.58
Msg Rate (msg/s) | 169967.13 | 562214.36 | 173647.96
CPU Usage (%) | 677.95 | 739.62 | 555.20
Memory (MB) | 44.00 | 21.00 | 48.00
--------------------------------------------------------------------------------
Performance Charts
==================
Throughput (MB/s) (Higher is better)
pion | ████████████ 169.58
Message Rate (msg/s) (Higher is better)
pion | ████████████ 173647.96
Setup Latency (ms) (Lower is better)
pion | ████ 3.00
CPU Usage (%) (Lower is better)
pion | ████████████████████████████████████████ 555.20
Memory (MB) (Lower is better)
pion | ████████████████████████████████████████ 48.00
```
**Key Findings:**
- **Throughput**: `rustrtc` is ~3.3× faster than `webrtc-rs` and ~3.2× faster than `pion`.
- **Memory**: `rustrtc` uses ~52% less memory than `webrtc-rs` and ~56% less than `pion`.
- **Setup latency**: 0.45 ms — orders of magnitude faster than `webrtc-rs` (25.6 ms) and ~6.7×
faster than `pion` (3.0 ms).
- **Efficiency per CPU**: 0.74 MB/s per CPU-percent vs 0.31 (pion) and 0.24 (webrtc-rs) —
`rustrtc` delivers ~2.3× more throughput per unit of CPU.
**No regression with the new stack:** this run has the TWCC/GCC pipeline **active**
(`enable_gcc = true`: transport-cc sequence stamping on every outbound packet plus
receiver-side TWCC feedback generation), and throughput still holds 3.3× / 3.2× over
`webrtc-rs` / `pion`. ICE restart, mDNS candidate obfuscation, and the VP9 codec are
likewise pure add-ons — the ratios above are the stable signal across releases
(0.3.114: 2.95× / 2.7×; 0.3.141: 3.3× / 3.2×).
## Usage
Here is a simple example of how to create a `PeerConnection` and handle an offer:
```rust
use rustrtc::{PeerConnection, RtcConfiguration, SessionDescription, SdpType};
#[tokio::main]
async fn main() {
let config = RtcConfiguration::default();
let pc = PeerConnection::new(config);
// Create a Data Channel
let dc = pc.create_data_channel("data", None).unwrap();
// Handle received messages
let dc_clone = dc.clone();
tokio::spawn(async move {
while let Some(event) = dc_clone.recv().await {
if let rustrtc::DataChannelEvent::Message(data) = event {
println!("Received: {:?}", String::from_utf8_lossy(&data));
}
}
});
// Create an offer
let offer = pc.create_offer().unwrap();
pc.set_local_description(offer).unwrap();
// Wait for ICE gathering to complete
pc.wait_for_gathering_complete().await;
// Get the complete SDP with candidates
let complete_offer = pc.local_description().unwrap();
println!("Offer SDP: {}", complete_offer.to_sdp_string());
}
```
## Configuration
All configuration goes through `RtcConfiguration` (or its builder `RtcConfigurationBuilder`):
### Transport & Network
- **`transport_mode`** — `TransportMode::WebRtc` (default), `TransportMode::Srtp`, or `TransportMode::Rtp`.
- **`ice_servers`** — STUN/TURN server list.
- **`ice_transport_policy`** — `All` or `Relay`.
- **`rtp_start_port` / `rtp_end_port`** — Restrict RTP/ICE to a port range.
- **`external_ip`** — Override the external IP for ICE candidates (NAT scenarios).
- **`external_ip_candidate_type`** — How ICE advertises `external_ip`: `Host` (default) replaces the host candidate's address; `ServerReflexive` keeps the host candidate and adds `external_ip` as a srflx candidate on the same socket (1:1 NAT, RFC 8445 §5.1.1.2). WebRTC mode only.
- **`bind_ip`** — Bind to a specific local IP.
- **`disable_ipv6`** — Disable IPv6 candidate gathering.
- **`enable_ice_lite`** — Enable ICE Lite mode.
- **`ice_tcp_policy`** — `IceTcpPolicy::Disabled` (default), `IceTcpPolicy::Enabled`, or `IceTcpPolicy::PassiveOnly`. Controls ICE TCP candidate support per RFC 6544.
- **`ice_udp_mux`** / **`ice_udp_mux_port`** — Share a single UDP socket across many `PeerConnection`s (single-port multiplexing for SFU/WHEP). Set `ice_udp_mux = true` and `ice_udp_mux_port = <port>`; incoming packets are demuxed by the server ufrag in the STUN Binding Request, then by remote source address.
- **`enable_mdns`** — Advertise host candidates via mDNS (`<random>.local` hostnames instead of local IPs, draft-ietf-rtcweb-mdns). A built-in mDNS responder answers A/AAAA lookups; real addresses are kept internally so connectivity is unaffected. Default: `false`.
### Bandwidth Estimation (GCC)
- **`enable_gcc`** — TWCC + GCC loop (default: `true`): outbound RTP is stamped with transport-cc sequence numbers, TWCC feedback is generated for inbound streams, and each `RtpSender` publishes a bandwidth estimate. The library does not throttle sends itself — drive your encoder from `RtpSender::subscribe_target_bitrate()`:
```rust
let mut rx = sender.subscribe_target_bitrate().unwrap();
while let Ok(new_bps) = rx.changed().await {
encoder.set_bitrate(*rx.borrow());
}
```
### ICE Restart
```rust
pc.restart_ice().await?; // rolls fresh ICE credentials (RFC 8445 §9)
let offer = pc.create_offer().await?; // carries the new ice-ufrag/pwd
```
Remote-initiated restarts (peer offers new credentials) are detected and mirrored automatically. DTLS/SRTP survive across the restart.
### UPnP
- **`enable_upnp`** — Auto-map ports via UPnP IGD.
- **`upnp_lease_duration`** — UPnP port mapping lease duration in seconds (default: 3600).
### RTP Latching
- **`enable_latching`** — Enable dynamic remote address detection for RTP-only mode.
- **`probation_max_packets`** — Number of packets to observe before committing a latched address.
### Media Capabilities
- **`media_capabilities`** — Configure audio/video/image (T.38) codecs and SCTP port via `MediaCapabilities`. Video presets: `VideoCapability::default()` (VP8), `VideoCapability::vp9()` / `vp9_with_rtx(pt)` (RFC 9628), `VideoCapability::h264()`.
- **`ssrc_start`** — Starting SSRC value for local tracks.
- **`depacketizer_strategy`** — Pluggable per-kind depacketizer (e.g. `Vp9Depacketizer` for RFC 9628 VP9 reassembly).
### SCTP (Data Channels)
- `sctp_rto_initial`, `sctp_rto_min`, `sctp_rto_max`, `sctp_max_association_retransmits`, `sctp_receive_window`, `sctp_heartbeat_interval`, `sctp_max_heartbeat_failures`, `sctp_max_burst`, `sctp_max_cwnd`
### RTP Buffer
- `rtp_buffer_capacity` — Per-SSRC receive buffer capacity.
- `buffer_drop_strategy` — `DropNew` or `DropOldest` when buffer is full.
```rust
use rustrtc::{
PeerConnection, RtcConfiguration, RtcConfigurationBuilder,
IceServer, TransportMode, config::T38Capability,
};
// Using builder
let config = RtcConfigurationBuilder::new()
.transport_mode(TransportMode::Rtp)
.enable_latching(true)
.probation_max_packets(Some(5))
.rtp_port_range(50000, 50100)
.enable_upnp(true)
.ice_tcp_policy(config::IceTcpPolicy::Enabled)
.ice_server(IceServer::new(vec!["stun:stun.l.google.com:19302"]))
.build();
let pc = PeerConnection::new(config);
```
```rust
// Direct field access
let mut config = RtcConfiguration::default();
config.transport_mode = TransportMode::WebRtc;
config.enable_latching = true;
config.rtp_start_port = Some(50000);
config.rtp_end_port = Some(50100);
config.enable_upnp = true;
```
## T.38 fax
The `t38` feature provides a complete T.38 v3 terminal: IFP wire codec, UDPTL
transport (with redundancy and gap recovery), a T.30 session engine
(CED/DIS → DCS/TCF → CFR → page → EOP/MCF → DCN, with timers and retries),
and V.21/V.27ter DSP for audio-gateway use.
```rust
use rustrtc::t38::endpoint::{FaxEndpoint, ReceiveCodec};
use rustrtc::t38::t30::{T30FaxConfig, T30Role, T30Session};
let mut session = T30Session::new(T30FaxConfig::default());
session.role = T30Role::Callee;
let endpoint = FaxEndpoint::from_socket(socket, remote, session);
endpoint.set_codec(ReceiveCodec::Wire);
let events = endpoint.run_call(60_000).await; // drives the whole fax session
```
### spandsp interop e2e
`tests/t38_spandsp_interop.rs` runs real fax sessions against a spandsp-based
T.38 terminal (`tools/t38-peer/t38_peer.py`, ctypes over the system
libspandsp). Both directions are covered: rustrtc-caller→spandsp-callee
(pixel-exact page verification) and spandsp-caller→rustrtc-callee.
```
# requires: python3 + PIL, and libspandsp (brew install spandsp)
cargo test --features t38,t38-interop --test t38_spandsp_interop
```
Without the `t38-interop` feature the tests compile to nothing; with the
feature but without python3/libspandsp they skip at runtime.
## Examples
You can run the examples provided in the repository.
### SFU (Selective Forwarding Unit)
A multi-user video conferencing server. It receives media from each participant and forwards it to others.
1. Run the server:
```bash
cargo run --example rustrtc_sfu
```
2. Open your browser and navigate to `http://127.0.0.1:8081`. Open multiple tabs/windows to simulate multiple users.
### Echo Server
The echo server example demonstrates how to accept a WebRTC connection, receive data on a data channel, and echo it back. It also supports video playback if an IVF file is provided.
1. Run the server:
```bash
cargo run --example echo_server
```
2. Open your browser and navigate to `http://127.0.0.1:3000`.
### DataChannel Chat
A multi-user chat room using WebRTC DataChannels.
1. Run the server:
```bash
cargo run --example datachannel_chat
```
2. Open your browser and navigate to `http://127.0.0.1:3000`. Open multiple tabs to chat between them.
### Audio Saver
Records audio from the browser's microphone and saves it to a file (`output.ulaw`) on the server.
1. Run the server:
```bash
cargo run --example audio_saver
```
2. Open your browser and navigate to `http://127.0.0.1:3000`. Click "Start" to begin recording.
### RTP Play (FFmpeg)
Streams a video file (`examples/static/output.ivf`) via RTP to a UDP port, which can be played back using `ffplay`.
1. Run the server:
```bash
cargo run --example rtp_play
```
2. In a separate terminal, run `ffplay` (requires ffmpeg installed):
```bash
ffplay -protocol_whitelist file,udp,rtp -i examples/rtp_play.sdp
```
## License
This project is licensed under the MIT License.