rustledger-validate 0.17.0

//! Validation error types.

use rustledger_core::NaiveDate;
use rustledger_parser::{Span, Spanned};
use thiserror::Error;

/// Validation error codes.
///
/// Error codes follow the spec in `spec/core/validation.md`. Every variant's
/// [`ErrorCode::code`] is asserted to appear in that spec by
/// `error_codes_documented_in_spec` (a drift guard).
#[derive(Debug, Clone, Copy, PartialEq, Eq, Hash)]
pub enum ErrorCode {
    // === Account Errors (E1xxx) ===
    /// E1001: Account used before it was opened.
    AccountNotOpen,
    /// E1002: Account already open (duplicate open directive).
    AccountAlreadyOpen,
    /// E1003: Account used after it was closed.
    AccountClosed,
    /// E1004: Account close with non-zero balance.
    AccountCloseNotEmpty,
    /// E1005: Invalid account name.
    InvalidAccountName,

    // === Balance Errors (E2xxx) ===
    /// E2001: Balance assertion failed.
    BalanceAssertionFailed,
    /// E2002: Balance exceeds explicit tolerance.
    BalanceToleranceExceeded,
    /// E2003: Pad without subsequent balance assertion.
    PadWithoutBalance,
    /// E2004: Multiple pads for same balance assertion.
    MultiplePadForBalance,

    // === Transaction Errors (E3xxx) ===
    /// E3001: Transaction does not balance.
    TransactionUnbalanced,
    /// E3002: Multiple postings missing amounts for same currency.
    MultipleInterpolation,
    /// E3003: Transaction has no postings.
    ///
    /// Reserved for spec parity but **never emitted**: rledger skips validation
    /// of a posting-less transaction rather than flagging it (matching Python
    /// beancount, which treats it as a structurally-valid no-op). See the early
    /// return in `validate_transaction_structure` and the
    /// `test_validate_no_postings_allowed` test.
    NoPostings,
    /// E3004: Transaction has single posting (warning).
    SinglePosting,

    // === Booking Errors (E4xxx) ===
    /// E4001: No matching lot for reduction.
    NoMatchingLot,
    /// E4002: Insufficient units in lot for reduction.
    InsufficientUnits,
    /// E4003: Ambiguous lot match in STRICT mode.
    AmbiguousLotMatch,
    /// E4005: Cost amount is negative (cost must be non-negative).
    NegativeCost,

    // === Currency Errors (E5xxx) ===
    /// E5001: Currency not declared (when strict mode enabled).
    UndeclaredCurrency,
    /// E5002: Currency not allowed in account.
    CurrencyNotAllowed,
    /// E5003: Invalid `precision` metadata on commodity directive (warning).
    InvalidPrecisionMetadata,

    // === Option Errors (E7xxx) ===
    /// E7001: Unknown option name.
    UnknownOption,
    /// E7002: Invalid option value.
    InvalidOptionValue,
    /// E7003: Duplicate non-repeatable option.
    DuplicateOption,

    // === Document Errors (E8xxx) ===
    /// E8001: Document file not found.
    DocumentNotFound,

    // === Date Errors (E10xxx) ===
    /// E10001: Date out of order (info only).
    DateOutOfOrder,
    /// E10002: Entry dated in the future (warning).
    FutureDate,
}

impl ErrorCode {
    /// Every error-code variant. Used by the spec-drift guard test (and any
    /// catalog enumeration). MUST list every variant — keep it in sync with the
    /// enum; the exhaustive [`code`](Self::code) match is the compiler-enforced
    /// source of truth for the code strings themselves.
    pub const ALL: &'static [Self] = &[
        Self::AccountNotOpen,
        Self::AccountAlreadyOpen,
        Self::AccountClosed,
        Self::AccountCloseNotEmpty,
        Self::InvalidAccountName,
        Self::BalanceAssertionFailed,
        Self::BalanceToleranceExceeded,
        Self::PadWithoutBalance,
        Self::MultiplePadForBalance,
        Self::TransactionUnbalanced,
        Self::MultipleInterpolation,
        Self::NoPostings,
        Self::SinglePosting,
        Self::NoMatchingLot,
        Self::InsufficientUnits,
        Self::AmbiguousLotMatch,
        Self::NegativeCost,
        Self::UndeclaredCurrency,
        Self::CurrencyNotAllowed,
        Self::InvalidPrecisionMetadata,
        Self::UnknownOption,
        Self::InvalidOptionValue,
        Self::DuplicateOption,
        Self::DocumentNotFound,
        Self::DateOutOfOrder,
        Self::FutureDate,
    ];

    /// Get the error code string (e.g., "E1001").
    #[must_use]
    pub const fn code(&self) -> &'static str {
        match self {
            // Account errors
            Self::AccountNotOpen => "E1001",
            Self::AccountAlreadyOpen => "E1002",
            Self::AccountClosed => "E1003",
            Self::AccountCloseNotEmpty => "E1004",
            Self::InvalidAccountName => "E1005",
            // Balance errors
            Self::BalanceAssertionFailed => "E2001",
            Self::BalanceToleranceExceeded => "E2002",
            Self::PadWithoutBalance => "E2003",
            Self::MultiplePadForBalance => "E2004",
            // Transaction errors
            Self::TransactionUnbalanced => "E3001",
            Self::MultipleInterpolation => "E3002",
            Self::NoPostings => "E3003",
            Self::SinglePosting => "E3004",
            // Booking errors
            Self::NoMatchingLot => "E4001",
            Self::InsufficientUnits => "E4002",
            Self::AmbiguousLotMatch => "E4003",
            Self::NegativeCost => "E4005",
            // Currency errors
            Self::UndeclaredCurrency => "E5001",
            Self::CurrencyNotAllowed => "E5002",
            Self::InvalidPrecisionMetadata => "E5003",
            // Option errors
            Self::UnknownOption => "E7001",
            Self::InvalidOptionValue => "E7002",
            Self::DuplicateOption => "E7003",
            // Document errors
            Self::DocumentNotFound => "E8001",
            // Date errors
            Self::DateOutOfOrder => "E10001",
            Self::FutureDate => "E10002",
        }
    }

    /// Check if this is a warning (not an error).
    #[must_use]
    pub const fn is_warning(&self) -> bool {
        matches!(
            self,
            Self::FutureDate
                | Self::SinglePosting
                | Self::AccountCloseNotEmpty
                | Self::DateOutOfOrder
                | Self::InvalidPrecisionMetadata
        )
    }

    /// Check if this is just informational.
    #[must_use]
    pub const fn is_info(&self) -> bool {
        matches!(self, Self::DateOutOfOrder)
    }

    /// Whether this diagnostic is advisory-only and must NOT be surfaced by
    /// `check` (which mirrors `bean-check`). Python beancount does not flag
    /// closing an account with a residual balance, so `check` stays silent; the
    /// advisory is surfaced instead by `rledger lint closed-nonempty`.
    #[must_use]
    pub const fn is_advisory_only(&self) -> bool {
        matches!(self, Self::AccountCloseNotEmpty)
    }

    /// Get the severity level.
    #[must_use]
    pub const fn severity(&self) -> Severity {
        if self.is_info() {
            Severity::Info
        } else if self.is_warning() {
            Severity::Warning
        } else {
            Severity::Error
        }
    }

    /// Whether this error represents a parse-phase concern rather than a
    /// semantic/validate-phase concern.
    ///
    /// Some checks — notably account-name structure (E1005) — are lexical in
    /// nature and are conceptually part of parsing, even though rustledger
    /// currently runs them during validation because the set of valid account
    /// roots is not known until options have been resolved. Python beancount's
    /// parser rejects these inputs at parse time, so we tag them as parse-phase
    /// for consumers that distinguish the two (e.g. the conformance harness).
    #[must_use]
    pub const fn is_parse_phase(&self) -> bool {
        matches!(self, Self::InvalidAccountName)
    }
}

/// Whether a rendered diagnostic code string (e.g. `"E1004"`) is advisory-only.
///
/// The string-keyed counterpart to [`ErrorCode::is_advisory_only`], for
/// consumers (the CLI `check`/`lint` split) that only carry the code string.
/// Keeping it here means the set of advisory-only codes lives in one place.
#[must_use]
pub fn is_advisory_only_code(code: &str) -> bool {
    code == ErrorCode::AccountCloseNotEmpty.code()
}

/// Severity level for validation messages.
#[derive(Debug, Clone, Copy, PartialEq, Eq, Hash)]
pub enum Severity {
    /// Ledger is invalid.
    Error,
    /// Suspicious but valid.
    Warning,
    /// Informational only.
    Info,
}

impl std::fmt::Display for ErrorCode {
    fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
        write!(f, "{}", self.code())
    }
}

/// A validation error.
///
/// The `Display` impl emits just the message text (no `[E1234]` prefix).
/// CLI and IDE renderers are expected to prepend the error code themselves,
/// which avoids the double-tagging seen in older output like
/// `error[E3001]: [E3001] ...` (see issue #901).
#[derive(Debug, Clone, Error)]
#[error("{message}")]
#[non_exhaustive]
pub struct ValidationError {
    /// Error code.
    pub code: ErrorCode,
    /// Error message.
    pub message: String,
    /// Date of the directive that caused the error.
    pub date: NaiveDate,
    /// Additional context.
    pub context: Option<String>,
    /// Advisory note attached to the error — typically used to help users
    /// diagnose the underlying cause (e.g. "this directive was synthesized
    /// by a plugin"). Unlike [`Self::context`], which describes data tied
    /// to the error, the note describes something about its *origin*.
    pub note: Option<String>,
    /// Source span (byte offsets within the file).
    pub span: Option<Span>,
    /// Source file ID (index into `SourceMap`).
    /// Uses `u16` to minimize struct size (max 65,535 files).
    pub file_id: Option<u16>,
}

impl ValidationError {
    /// Create a new validation error without source location.
    #[must_use]
    pub fn new(code: ErrorCode, message: impl Into<String>, date: NaiveDate) -> Self {
        Self {
            code,
            message: message.into(),
            date,
            context: None,
            note: None,
            span: None,
            file_id: None,
        }
    }

    /// Create a new validation error with source location from a spanned directive.
    #[must_use]
    pub fn with_location<T>(
        code: ErrorCode,
        message: impl Into<String>,
        date: NaiveDate,
        spanned: &Spanned<T>,
    ) -> Self {
        Self {
            code,
            message: message.into(),
            date,
            context: None,
            note: None,
            span: Some(spanned.span),
            file_id: Some(spanned.file_id),
        }
    }

    /// Add context to this error.
    #[must_use]
    pub fn with_context(mut self, context: impl Into<String>) -> Self {
        self.context = Some(context.into());
        self
    }

    /// Attach an advisory note to this error (builder pattern).
    #[must_use]
    pub fn with_note(mut self, note: impl Into<String>) -> Self {
        self.note = Some(note.into());
        self
    }

    /// Set the source location for this error (builder pattern).
    ///
    /// Use this to add location info to an existing error. For creating
    /// new errors with location, prefer [`Self::with_location`] instead.
    #[must_use]
    pub const fn at_location<T>(mut self, spanned: &Spanned<T>) -> Self {
        self.span = Some(spanned.span);
        self.file_id = Some(spanned.file_id);
        self
    }
}

#[cfg(test)]
mod tests {
    use super::*;

    #[test]
    fn error_codes_documented_in_spec() {
        // Drift guard: every `ErrorCode` must be documented in the validation
        // spec. (The spec may also carry codes emitted by other crates — e.g.
        // loader include errors E9001/E9002 — so this is a subset check, not
        // strict equality.) Codes are backtick-wrapped in the spec (`**Code:**
        // `E1001``), so the backtick delimiters keep `E1001` from matching
        // inside `E10001`.
        let spec = include_str!("../../../spec/core/validation.md");
        let missing: Vec<&str> = ErrorCode::ALL
            .iter()
            .map(ErrorCode::code)
            .filter(|code| !spec.contains(&format!("`{code}`")))
            .collect();
        assert!(
            missing.is_empty(),
            "error codes missing from spec/core/validation.md: {missing:?}"
        );
    }

    #[test]
    fn all_lists_distinct_codes() {
        // Cheap completeness/dup guard for `ALL`: every code string is unique.
        let mut codes: Vec<&str> = ErrorCode::ALL.iter().map(ErrorCode::code).collect();
        let n = codes.len();
        codes.sort_unstable();
        codes.dedup();
        assert_eq!(codes.len(), n, "duplicate code in ErrorCode::ALL");
    }

    #[test]
    fn invalid_account_name_is_parse_phase() {
        // E1005 is a lexical/structural account-name check and must be
        // reported as a parse-phase diagnostic, matching Python beancount.
        assert!(ErrorCode::InvalidAccountName.is_parse_phase());
    }

    #[test]
    fn other_account_errors_are_validate_phase() {
        // Lifecycle errors remain semantic (validate-phase) concerns.
        assert!(!ErrorCode::AccountNotOpen.is_parse_phase());
        assert!(!ErrorCode::AccountAlreadyOpen.is_parse_phase());
        assert!(!ErrorCode::AccountClosed.is_parse_phase());
    }

    #[test]
    fn non_account_errors_are_validate_phase() {
        assert!(!ErrorCode::TransactionUnbalanced.is_parse_phase());
        assert!(!ErrorCode::BalanceAssertionFailed.is_parse_phase());
        assert!(!ErrorCode::UnknownOption.is_parse_phase());
    }
}