rustfs-replication 1.0.1

Replication contracts and wire formats for RustFS.
Documentation
// Copyright 2024 RustFS Team
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

use std::collections::HashMap;
use std::fmt;

use crate::http::{SUFFIX_ACTUAL_SIZE, get_internal_metadata};

#[derive(Debug, Clone, Copy, PartialEq, Eq)]
pub struct ReplicationMultipartPartInput {
    pub offset: i64,
    pub part_number: usize,
    pub part_size: i64,
}

#[derive(Debug, Clone, Copy, PartialEq, Eq)]
pub struct ReplicationMultipartPartPlan {
    pub part_number: i32,
    pub part_size: i64,
    pub range: ReplicationMultipartRange,
    pub next_offset: i64,
}

#[derive(Debug, Clone, Copy, PartialEq, Eq)]
pub struct ReplicationMultipartRange {
    pub start: i64,
    pub end: i64,
}

#[derive(Debug, Clone, Copy, PartialEq, Eq)]
pub enum ReplicationMultipartPlanError {
    InvalidOffset { offset: i64 },
    InvalidPartSize { part_size: i64 },
    PartRangeOverflow { offset: i64, part_size: i64 },
    PartOffsetOverflow { offset: i64, part_size: i64 },
    PartNumberOverflow { part_number: usize },
}

impl fmt::Display for ReplicationMultipartPlanError {
    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
        match self {
            Self::InvalidOffset { offset } => write!(f, "invalid multipart replication part offset {offset}"),
            Self::InvalidPartSize { part_size } => write!(f, "invalid multipart replication part size {part_size}"),
            Self::PartRangeOverflow { offset, part_size } => {
                write!(f, "multipart replication part range overflows for offset {offset} and size {part_size}")
            }
            Self::PartOffsetOverflow { offset, part_size } => {
                write!(f, "multipart replication next offset overflows for offset {offset} and size {part_size}")
            }
            Self::PartNumberOverflow { part_number } => {
                write!(f, "multipart replication part number {part_number} overflows i32")
            }
        }
    }
}

impl std::error::Error for ReplicationMultipartPlanError {}

pub fn replication_multipart_part_plan(
    input: ReplicationMultipartPartInput,
) -> Result<ReplicationMultipartPartPlan, ReplicationMultipartPlanError> {
    if input.offset < 0 {
        return Err(ReplicationMultipartPlanError::InvalidOffset { offset: input.offset });
    }
    if input.part_size <= 0 {
        return Err(ReplicationMultipartPlanError::InvalidPartSize {
            part_size: input.part_size,
        });
    }

    let part_number = i32::try_from(input.part_number).map_err(|_| ReplicationMultipartPlanError::PartNumberOverflow {
        part_number: input.part_number,
    })?;
    let end = input
        .offset
        .checked_add(input.part_size - 1)
        .ok_or(ReplicationMultipartPlanError::PartRangeOverflow {
            offset: input.offset,
            part_size: input.part_size,
        })?;
    let next_offset = end.checked_add(1).ok_or(ReplicationMultipartPlanError::PartOffsetOverflow {
        offset: input.offset,
        part_size: input.part_size,
    })?;

    Ok(ReplicationMultipartPartPlan {
        part_number,
        part_size: input.part_size,
        range: ReplicationMultipartRange {
            start: input.offset,
            end,
        },
        next_offset,
    })
}

pub fn replication_multipart_complete_actual_size(user_defined: &HashMap<String, String>) -> String {
    get_internal_metadata(user_defined, SUFFIX_ACTUAL_SIZE).unwrap_or_default()
}

/// Largest body S3 accepts on a single `PutObject`. Anything above this has to
/// be uploaded as multipart; the limit is part of the S3 API, not a RustFS
/// tunable, so every generic S3 target enforces it.
pub const REPLICATION_MAX_SINGLE_PUT_SIZE: i64 = 5 * 1024 * 1024 * 1024;

/// Reject a single-`PutObject` replication transfer the target can never accept.
///
/// Replication mirrors the object's *source-side storage shape*, which is
/// read from the ETag: a multipart upload carries a `-<part count>` suffix,
/// a single `PutObject` does not. A single-`PutObject` object replicates with
/// one `PutObject` whatever its size, and a multipart object replays the
/// source's own part layout. So a source object larger than
/// [`REPLICATION_MAX_SINGLE_PUT_SIZE`] whose ETag has no part-count suffix can
/// never reach a generic S3 target — the remote rejects it with
/// `EntityTooLarge`, but only after the whole body has been streamed to it
/// (rustfs#6825).
///
/// Returning the failure up front turns an unbounded wasted transfer plus an
/// opaque remote error into a stated, diagnosable limit. The message quotes
/// the ETag the decision was made from rather than asserting a conclusion
/// about how the object was uploaded: an operator reading the line can check
/// the evidence against the object's own listing, and a transport-selection
/// bug upstream of this guard shows up as a visible contradiction instead of
/// as advice to re-upload an object that was already multipart.
///
/// RustFS deliberately does not re-chunk such an object into multipart on the
/// replication side: the target's part layout is the source's, and rewriting
/// it would break the ETag/part identity that heal and delete convergence
/// address.
pub fn replication_single_put_size_error(is_multipart: bool, transfer_size: i64, etag: Option<&str>) -> Option<String> {
    if is_multipart || transfer_size <= REPLICATION_MAX_SINGLE_PUT_SIZE {
        return None;
    }
    let etag = etag.filter(|value| !value.is_empty()).unwrap_or("<none>");
    Some(format!(
        "object of {transfer_size} bytes exceeds the {REPLICATION_MAX_SINGLE_PUT_SIZE} byte single-PutObject limit \
         of an S3 target; its ETag {etag} has no part-count suffix, so replication uses a single PutObject and \
         does not re-chunk; if the object is in fact multipart this is a transport-selection defect, otherwise \
         re-upload it as a multipart upload to make it replicable"
    ))
}

#[cfg(test)]
mod tests {
    use super::{
        REPLICATION_MAX_SINGLE_PUT_SIZE, ReplicationMultipartPartInput, ReplicationMultipartPartPlan,
        ReplicationMultipartPlanError, ReplicationMultipartRange, replication_multipart_complete_actual_size,
        replication_multipart_part_plan, replication_single_put_size_error,
    };
    use crate::http::{SUFFIX_ACTUAL_SIZE, insert_internal_metadata};
    use std::collections::HashMap;

    const MIB: i64 = 1024 * 1024;

    #[test]
    fn multipart_part_plan_builds_range_and_next_offset() {
        assert_eq!(
            replication_multipart_part_plan(ReplicationMultipartPartInput {
                offset: 0,
                part_number: 1,
                part_size: 10
            }),
            Ok(ReplicationMultipartPartPlan {
                part_number: 1,
                part_size: 10,
                range: ReplicationMultipartRange { start: 0, end: 9 },
                next_offset: 10
            })
        );

        assert_eq!(
            replication_multipart_part_plan(ReplicationMultipartPartInput {
                offset: 10,
                part_number: 2,
                part_size: 5
            }),
            Ok(ReplicationMultipartPartPlan {
                part_number: 2,
                part_size: 5,
                range: ReplicationMultipartRange { start: 10, end: 14 },
                next_offset: 15
            })
        );
    }

    #[test]
    fn multipart_part_plan_rejects_invalid_offsets_and_sizes() {
        assert_eq!(
            replication_multipart_part_plan(ReplicationMultipartPartInput {
                offset: -1,
                part_number: 1,
                part_size: 10
            }),
            Err(ReplicationMultipartPlanError::InvalidOffset { offset: -1 })
        );
        assert_eq!(
            replication_multipart_part_plan(ReplicationMultipartPartInput {
                offset: 0,
                part_number: 1,
                part_size: 0
            }),
            Err(ReplicationMultipartPlanError::InvalidPartSize { part_size: 0 })
        );
    }

    #[test]
    fn multipart_part_plan_rejects_overflow() {
        assert_eq!(
            replication_multipart_part_plan(ReplicationMultipartPartInput {
                offset: i64::MAX - 5,
                part_number: 1,
                part_size: 10
            }),
            Err(ReplicationMultipartPlanError::PartRangeOverflow {
                offset: i64::MAX - 5,
                part_size: 10
            })
        );
        assert_eq!(
            replication_multipart_part_plan(ReplicationMultipartPartInput {
                offset: i64::MAX,
                part_number: 1,
                part_size: 1
            }),
            Err(ReplicationMultipartPlanError::PartOffsetOverflow {
                offset: i64::MAX,
                part_size: 1
            })
        );
    }

    #[test]
    fn multipart_part_plan_rejects_part_number_overflow() {
        let overflowing_part_number = usize::MAX;

        assert_eq!(
            replication_multipart_part_plan(ReplicationMultipartPartInput {
                offset: 0,
                part_number: overflowing_part_number,
                part_size: 10
            }),
            Err(ReplicationMultipartPlanError::PartNumberOverflow {
                part_number: overflowing_part_number
            })
        );
    }

    #[test]
    fn multipart_complete_actual_size_reads_compatible_metadata() {
        let mut user_defined = HashMap::new();
        insert_internal_metadata(&mut user_defined, SUFFIX_ACTUAL_SIZE, "123".to_string());

        assert_eq!(replication_multipart_complete_actual_size(&user_defined), "123");
        assert!(replication_multipart_complete_actual_size(&HashMap::new()).is_empty());
    }

    #[test]
    fn single_put_size_guard_admits_transfers_a_target_can_accept() {
        for size in [
            0,
            1,
            MIB,
            REPLICATION_MAX_SINGLE_PUT_SIZE - 1,
            REPLICATION_MAX_SINGLE_PUT_SIZE,
        ] {
            assert_eq!(
                replication_single_put_size_error(false, size, Some("0123456789abcdef0123456789abcdef")),
                None,
                "single PUT of {size} bytes is within the S3 limit and must not be rejected"
            );
        }
    }

    #[test]
    fn single_put_size_guard_rejects_an_oversized_single_put() {
        let size = REPLICATION_MAX_SINGLE_PUT_SIZE + 1;
        let etag = "0123456789abcdef0123456789abcdef";
        let err = replication_single_put_size_error(false, size, Some(etag)).expect("oversized single PUT must be rejected");

        // The message is the operator's diagnosis: it has to name the actual
        // size, the limit, and the remedy.
        assert!(err.contains(&size.to_string()), "message must name the object size: {err}");
        assert!(
            err.contains(&REPLICATION_MAX_SINGLE_PUT_SIZE.to_string()),
            "message must name the limit: {err}"
        );
        assert!(err.contains("multipart"), "message must name the remedy: {err}");
    }

    #[test]
    fn single_put_size_guard_quotes_the_etag_it_decided_from() {
        // rustfs#6825, second report: a 768-part object was misrouted to the
        // single-PUT path and this guard told the operator it "was not written
        // as multipart" and to re-upload it. The message must carry the
        // evidence the decision came from, so a misroute reads as a visible
        // contradiction against the object's own listing, not as advice.
        let etag = "767e7a8379c0f62c39e0ceeea0e13de9";
        let err = replication_single_put_size_error(false, REPLICATION_MAX_SINGLE_PUT_SIZE + 1, Some(etag))
            .expect("oversized single PUT must be rejected");

        assert!(err.contains(etag), "message must quote the ETag: {err}");
        assert!(
            err.contains("part-count suffix"),
            "message must say what about the ETag was read, not assert an upload method: {err}"
        );
        assert!(
            !err.contains("was not written as multipart"),
            "message must not assert how the object was uploaded: {err}"
        );
        assert!(
            err.contains("transport-selection defect"),
            "message must tell the operator what a contradiction with the listing means: {err}"
        );

        let missing = replication_single_put_size_error(false, REPLICATION_MAX_SINGLE_PUT_SIZE + 1, None)
            .expect("oversized single PUT must be rejected");
        assert!(missing.contains("<none>"), "a missing ETag must be stated, not hidden: {missing}");
        let empty = replication_single_put_size_error(false, REPLICATION_MAX_SINGLE_PUT_SIZE + 1, Some(""))
            .expect("oversized single PUT must be rejected");
        assert!(empty.contains("<none>"), "an empty ETag must be stated, not hidden: {empty}");
    }

    #[test]
    fn single_put_size_guard_never_rejects_the_multipart_route() {
        // Multipart replays the source part layout, so object size alone says
        // nothing about whether the target will accept it; the per-part limits
        // are the target's to enforce.
        assert_eq!(
            replication_single_put_size_error(
                true,
                REPLICATION_MAX_SINGLE_PUT_SIZE * 1024,
                Some("0123456789abcdef0123456789abcdef-768")
            ),
            None
        );
    }
}