rust-fs-ext4 0.8.0

//! JBD2 journal superblock parser.
//!
//! Spec: kernel.org/doc/html/latest/filesystems/ext4/journal.html.
//!
//! JBD2 writes journal metadata in **big-endian**, unlike the ext4 filesystem
//! body which is little-endian. Every block in the journal begins with a
//! 12-byte `journal_header_t` whose magic is `0xc03b3998`. Block-type 3 or 4
//! identifies the superblock (v1 / v2). The superblock is at journal block 0.
//!
//! Locating the journal: `sb.journal_inode` (usually 8) names an inode whose
//! extent tree maps the journal file. Journal block N = logical block N of
//! that inode; convert to a physical fs block via the extent tree.
//!
//! This module parses the journal superblock. Walking transactions is
//! [`crate::journal`], replaying them [`crate::journal_apply`], and writing
//! them [`crate::journal_writer`].
//!
//! Layout summary:
//! ```text
//!   0x0000 journal_header_t (12 bytes)
//!            __be32 h_magic       = 0xc03b3998
//!            __be32 h_blocktype   = 3 (V1) or 4 (V2)
//!            __be32 h_sequence
//!   0x000C __be32 s_blocksize   (journal block size)
//!   0x0010 __be32 s_maxlen      (total blocks in journal)
//!   0x0014 __be32 s_first       (first block of log information)
//!   0x0018 __be32 s_sequence    (first commit ID expected on next replay)
//!   0x001C __be32 s_start       (block number of the log start; 0 = clean)
//!   0x0020 __be32 s_errno
//!   --- V2 fields begin (0x0024+) ---
//!   0x0024 __be32 s_feature_compat
//!   0x0028 __be32 s_feature_incompat
//!   0x002C __be32 s_feature_ro_compat
//!   0x0030 u8[16] s_uuid
//!   0x0040 __be32 s_nr_users
//!   0x0044 __be32 s_dynsuper
//!   0x0048 __be32 s_max_transaction
//!   0x004C __be32 s_max_trans_data
//!   0x0050 u8     s_checksum_type
//!   0x0051 u8[3]  padding
//!   0x0054 __be32 s_num_fc_blks
//!   0x0058 __be32 s_head
//!   0x005C u8[160] padding
//!   0x00FC __be32 s_checksum
//!   0x0100 u8[16*48] s_users
//!   0x0400 end
//! ```

use crate::error::{Error, Result};
use crate::fs::Filesystem;
use crate::inode::Inode;

/// JBD2 header magic — big-endian `0xc0 0x3b 0x39 0x98` on disk.
pub const JBD2_MAGIC_NUMBER: u32 = 0xc03b_3998;

/// Header block-type values.
pub const JBD2_DESCRIPTOR_BLOCK: u32 = 1;
pub const JBD2_COMMIT_BLOCK: u32 = 2;
pub const JBD2_SUPERBLOCK_V1: u32 = 3;
pub const JBD2_SUPERBLOCK_V2: u32 = 4;
pub const JBD2_REVOKE_BLOCK: u32 = 5;

bitflags::bitflags! {
    /// `s_feature_incompat` — kernel must refuse to replay if any unknown bit set.
    #[derive(Debug, Clone, Copy, PartialEq, Eq)]
    pub struct JbdIncompat: u32 {
        const REVOKE        = 0x0000_0001;
        const BIT64         = 0x0000_0002;
        const ASYNC_COMMIT  = 0x0000_0004;
        const CSUM_V2       = 0x0000_0008;
        const CSUM_V3       = 0x0000_0010;
        const FAST_COMMIT   = 0x0000_0020;
    }
}

/// Parsed JBD2 superblock (read-only view).
#[derive(Debug, Clone)]
pub struct JournalSuperblock {
    /// Header block-type (`JBD2_SUPERBLOCK_V1` or `_V2`).
    pub block_type: u32,
    /// Next expected sequence number from the header (not s_sequence).
    pub header_sequence: u32,
    /// Journal block size in bytes.
    pub block_size: u32,
    /// Total blocks in the journal.
    pub max_len: u32,
    /// First block of log information (typically 1 — block 0 is the sb).
    pub first: u32,
    /// First commit ID expected when replay starts.
    pub sequence: u32,
    /// Start block of the log. **0 means clean unmount** (nothing to replay).
    pub start: u32,
    /// `s_errno`: the error an aborted journal records, 0 if healthy.
    pub errno: u32,
    /// V2-only feature flags (zero on V1 superblocks).
    pub feature_compat: u32,
    pub feature_incompat: u32,
    pub feature_ro_compat: u32,
    /// UUID identifying this journal (V2 only).
    pub uuid: [u8; 16],
    /// Number of filesystems sharing this journal (V2 only; always 1 for
    /// internal ext4 journals).
    pub nr_users: u32,
    /// Checksum algorithm id (V2 only; 1 = crc32, 4 = crc32c).
    pub checksum_type: u8,
    /// Total fast-commit blocks (V2, INCOMPAT_FAST_COMMIT only).
    pub num_fc_blocks: u32,
    /// Superblock checksum as stored on disk (V2 only).
    pub checksum: u32,
}

impl JournalSuperblock {
    /// The journal format supported by the checked recovery/write lifecycle.
    /// Feature refusal is a dependency capability boundary, not filesystem damage.
    pub fn validate_plain_recovery(&self, block_size: u32, blocks_count: u64) -> Result<()> {
        let supported = JbdIncompat::REVOKE.bits() | JbdIncompat::BIT64.bits();
        if self.feature_compat != 0
            || self.feature_ro_compat != 0
            || self.feature_incompat & !supported != 0
        {
            return Err(Error::Unsupported("checked lifecycle supports plain JBD2 only; checksummed/async/fast-commit journals need separate qualification"));
        }
        if self.block_type != JBD2_SUPERBLOCK_V2
            || self.block_size != block_size
            || self.first != 1
            || self.max_len <= self.first
            || u64::from(self.max_len) > blocks_count
            || (self.start != 0 && (self.start < self.first || self.start >= self.max_len))
            || self.nr_users != 1
        {
            return Err(Error::Corrupt("unsupported internal journal geometry"));
        }
        if self.errno != 0 {
            return Err(Error::Corrupt("journal records an outstanding error"));
        }
        Ok(())
    }

    /// True when the log has no outstanding transactions and replay is a no-op.
    pub fn is_clean(&self) -> bool {
        self.start == 0
    }

    /// Returns true if the journal uses v2 or v3 checksum tags.
    /// Whether this journal uses the v3 tag layout.
    ///
    /// Distinct from [`Self::uses_csum_v2_or_v3`], which says whether it
    /// is checksummed at all: the tag layout changes with V3 alone, and
    /// confusing the two lays tags neither this crate's reader nor the
    /// kernel can parse.
    pub fn uses_csum_v3(&self) -> bool {
        self.feature_incompat & JbdIncompat::CSUM_V3.bits() != 0
    }

    pub fn uses_csum_v2_or_v3(&self) -> bool {
        self.feature_incompat & (JbdIncompat::CSUM_V2.bits() | JbdIncompat::CSUM_V3.bits()) != 0
    }

    /// Returns true if the journal uses 64-bit block numbers (tag.t_blocknr_high).
    pub fn uses_64bit(&self) -> bool {
        self.feature_incompat & JbdIncompat::BIT64.bits() != 0
    }

    /// Returns true if revoke blocks are used.
    pub fn has_revoke(&self) -> bool {
        self.feature_incompat & JbdIncompat::REVOKE.bits() != 0
    }

    /// The `s_feature_incompat` bits this driver does not handle. Replay
    /// and writing both refuse a journal carrying any (#81): the field's
    /// own rule. `ASYNC_COMMIT` makes a transaction's completeness rest on
    /// checksums alone, and `FAST_COMMIT` keeps committed updates in an
    /// area the walker never visits.
    pub fn unsupported_incompat(&self) -> u32 {
        self.feature_incompat & !SUPPORTED_JBD_INCOMPAT
    }

    /// Why this journal's checksum declaration is one that cannot be
    /// honoured, or `None` when it names a single, usable scheme.
    ///
    /// A journal declares at most one way of checksumming its blocks: the
    /// v1 commit-block checksum (compat bit 0x1), or the per-block v2
    /// (incompat 0x8) or v3 (incompat 0x10) scheme, whose checksums are
    /// crc32c (`s_checksum_type` 4). journal.html lists the bits and the
    /// type codes; which combinations are refused was observed in the
    /// harness VM by patching the superblock of a clean journal (tests/
    /// jbd2_layouts_oracle.rs): the kernel will not load, and `e2fsck -fn`
    /// calls "Journal superblock is corrupt", exactly the three cases below.
    /// A journal without v2 or v3 is accepted whatever its type byte says.
    ///
    /// Replay and the writer each support v2 and v3 one at a time, so a
    /// journal naming both would otherwise pass the incompat check and be
    /// read with a layout its declaration does not name.
    pub fn checksum_declaration_error(&self) -> Option<&'static str> {
        let has = |bit: JbdIncompat| self.feature_incompat & bit.bits() != 0;
        let per_block = [has(JbdIncompat::CSUM_V2), has(JbdIncompat::CSUM_V3)];
        let commit_only = self.feature_compat & JBD2_FEATURE_COMPAT_CHECKSUM != 0;
        match per_block {
            [false, false] => None,
            [true, true] => Some("journal declares both CSUM_V2 and CSUM_V3"),
            _ if commit_only => Some("journal declares v1 checksums alongside CSUM_V2/V3"),
            _ if self.checksum_type != JBD2_CRC32C_CHKSUM => {
                Some("journal checksum type is not crc32c")
            }
            _ => None,
        }
    }

    /// The journal checksum seed: the crc32c of the journal's UUID, from
    /// `~0`. Every transaction-block checksum starts from it.
    pub fn csum_seed(&self) -> u32 {
        crate::checksum::linux_crc32c(!0, &self.uuid)
    }

    /// Bytes per descriptor-block tag, not counting the 16-byte UUID that
    /// follows a tag without the "same UUID" flag.
    ///
    /// journal.html describes two tag records: the v3 one (block number,
    /// flags, high block number, 32-bit checksum -- always all four
    /// words) and the older one (block number, 16-bit checksum, 16-bit
    /// flags, and the high block number only under `64BIT`). It does not
    /// say the older record's checksum slot exists only under v2; that was
    /// measured on journals `debugfs jo`/`jw` wrote in the harness VM
    /// (tests/jbd2_layouts_oracle.rs), where the distance between
    /// consecutive tags is exactly this table.
    pub fn tag_bytes(&self) -> usize {
        let per_block_scheme = if self.uses_csum_v3() {
            TagChecksum::V3
        } else if self.feature_incompat & JbdIncompat::CSUM_V2.bits() != 0 {
            TagChecksum::V2
        } else {
            TagChecksum::None
        };
        match (per_block_scheme, self.uses_64bit()) {
            (TagChecksum::None, false) => 8,
            (TagChecksum::None, true) => 12,
            (TagChecksum::V2, false) => 10,
            (TagChecksum::V2, true) => 14,
            (TagChecksum::V3, _) => 16,
        }
    }
}

/// Which per-block checksum a descriptor tag carries, for [`JournalSuperblock::tag_bytes`].
#[derive(Clone, Copy)]
enum TagChecksum {
    None,
    V2,
    V3,
}

/// `JBD2_FEATURE_COMPAT_CHECKSUM`: the v1 commit-block checksum.
pub const JBD2_FEATURE_COMPAT_CHECKSUM: u32 = 0x1;

/// `JBD2_CRC32C_CHKSUM`, the one `s_checksum_type` CSUM_V2/V3 allow.
pub const JBD2_CRC32C_CHKSUM: u8 = 4;

/// Journal incompat bits this driver replays and writes.
pub const SUPPORTED_JBD_INCOMPAT: u32 = JbdIncompat::REVOKE.bits()
    | JbdIncompat::BIT64.bits()
    | JbdIncompat::CSUM_V2.bits()
    | JbdIncompat::CSUM_V3.bits();

/// Bytes a checksummed journal reserves at the end of a descriptor or
/// revoke block for its `t_checksum` / `r_checksum` tail.
pub const BLOCK_TAIL_BYTES: usize = 4;

/// Offset of `h_chksum[0]` in a commit block (after the 12-byte header,
/// `h_chksum_type`, `h_chksum_size` and two bytes of padding).
pub const COMMIT_CHECKSUM_AT: usize = 16;

/// A tag's checksum: crc32c of the big-endian transaction sequence then
/// the journal copy of the block, from the journal's seed (the tag's
/// `t_checksum` in the format documentation). CSUM_V3 stores all 32 bits;
/// CSUM_V2 the
/// low 16.
pub fn tag_checksum(seed: u32, sequence: u32, data: &[u8]) -> u32 {
    let seq = crate::checksum::linux_crc32c(seed, &sequence.to_be_bytes());
    crate::checksum::linux_crc32c(seq, data)
}

/// A descriptor or revoke block's tail checksum: crc32c of the whole
/// block with the last four bytes taken as zero (the format
/// documentation's `jbd2_journal_block_tail` and `r_checksum`).
pub fn block_tail_checksum(seed: u32, block: &[u8]) -> u32 {
    let body = block.len().saturating_sub(BLOCK_TAIL_BYTES);
    let crc = crate::checksum::linux_crc32c(seed, &block[..body]);
    crate::checksum::linux_crc32c(crc, &[0u8; BLOCK_TAIL_BYTES])
}

/// A commit block's checksum: crc32c of the whole block with `h_chksum[0]`
/// taken as zero (the format documentation's `h_chksum`).
pub fn commit_block_checksum(seed: u32, block: &[u8]) -> u32 {
    let at = COMMIT_CHECKSUM_AT;
    let crc = crate::checksum::linux_crc32c(seed, &block[..at]);
    let crc = crate::checksum::linux_crc32c(crc, &[0u8; 4]);
    crate::checksum::linux_crc32c(crc, &block[at + 4..])
}

impl JournalSuperblock {
    /// Parse a journal superblock from its 1024-byte on-disk representation.
    /// `raw` should be at least 1024 bytes (block-size bytes in practice); we
    /// only read up to offset 0x100.
    pub fn parse(raw: &[u8]) -> Result<Self> {
        if raw.len() < 0x100 {
            return Err(Error::Corrupt("jbd2 superblock buffer too small"));
        }

        let h_magic = u32::from_be_bytes(raw[0x00..0x04].try_into().unwrap());
        if h_magic != JBD2_MAGIC_NUMBER {
            return Err(Error::Corrupt("jbd2 superblock magic mismatch"));
        }
        let block_type = u32::from_be_bytes(raw[0x04..0x08].try_into().unwrap());
        if block_type != JBD2_SUPERBLOCK_V1 && block_type != JBD2_SUPERBLOCK_V2 {
            return Err(Error::Corrupt("jbd2 header is not a superblock block type"));
        }
        let header_sequence = u32::from_be_bytes(raw[0x08..0x0C].try_into().unwrap());

        let block_size = u32::from_be_bytes(raw[0x0C..0x10].try_into().unwrap());
        let max_len = u32::from_be_bytes(raw[0x10..0x14].try_into().unwrap());
        let first = u32::from_be_bytes(raw[0x14..0x18].try_into().unwrap());
        let sequence = u32::from_be_bytes(raw[0x18..0x1C].try_into().unwrap());
        let start = u32::from_be_bytes(raw[0x1C..0x20].try_into().unwrap());
        let errno = u32::from_be_bytes(raw[0x20..0x24].try_into().unwrap());

        let mut out = Self {
            block_type,
            header_sequence,
            block_size,
            max_len,
            first,
            sequence,
            start,
            errno,
            feature_compat: 0,
            feature_incompat: 0,
            feature_ro_compat: 0,
            uuid: [0; 16],
            nr_users: 0,
            checksum_type: 0,
            num_fc_blocks: 0,
            checksum: 0,
        };

        // V2 extends with the dynamic-journal-features section.
        if block_type == JBD2_SUPERBLOCK_V2 {
            out.feature_compat = u32::from_be_bytes(raw[0x24..0x28].try_into().unwrap());
            out.feature_incompat = u32::from_be_bytes(raw[0x28..0x2C].try_into().unwrap());
            out.feature_ro_compat = u32::from_be_bytes(raw[0x2C..0x30].try_into().unwrap());
            out.uuid.copy_from_slice(&raw[0x30..0x40]);
            out.nr_users = u32::from_be_bytes(raw[0x40..0x44].try_into().unwrap());
            // 0x44 s_dynsuper ignored (never used by upstream)
            // 0x48 s_max_transaction / 0x4C s_max_trans_data ignored (hints only)
            out.checksum_type = raw[0x50];
            // 0x51..0x54 padding
            out.num_fc_blocks = u32::from_be_bytes(raw[0x54..0x58].try_into().unwrap());
            // 0x58 s_head / padding
            out.checksum = u32::from_be_bytes(raw[0xFC..0x100].try_into().unwrap());
        }

        Ok(out)
    }
}

/// Map a journal-relative block number to its physical fs block. Journal
/// block 0 contains the superblock.
///
/// Flavor-aware via [`crate::indirect::map_logical_any`]: ext4 journals
/// (whose journal inode carries `EXT4_EXTENTS_FL`) traverse the extent
/// tree; ext3 journals (legacy direct/indirect block pointers) walk the
/// indirect tree. Both schemes return `Ok(Some(physical))` for mapped
/// blocks, `Ok(None)` for sparse holes (which a healthy journal should
/// never have, but we don't enforce that here).
pub fn journal_block_to_physical(
    fs: &Filesystem,
    journal_inode: &Inode,
    journal_block: u64,
) -> Result<Option<u64>> {
    crate::indirect::map_logical_any(
        &journal_inode.block,
        journal_inode.flags,
        fs.dev.as_ref(),
        fs.sb.block_size(),
        journal_block,
    )
}

/// Read and parse the JBD2 superblock at block 0 of the journal.
///
/// Flow:
///   1. Look up `sb.journal_inode` (typically ino 8).
///   2. Map journal logical block 0 → physical fs block via its extent tree.
///   3. Read the block (one fs block; the JBD2 sb fits within it).
///   4. Parse the first 256 bytes as a `JournalSuperblock`.
///
/// Returns `Ok(None)` if `sb.journal_inode == 0` (filesystem lacks a journal).
pub fn read_superblock(fs: &Filesystem) -> Result<Option<JournalSuperblock>> {
    let jino_num = fs.sb.journal_inode;
    if jino_num == 0 {
        return Ok(None);
    }

    let raw = fs.read_inode_raw(jino_num)?;
    let jinode = Inode::parse(&raw)?;

    let phys = journal_block_to_physical(fs, &jinode, 0)?
        .ok_or(Error::Corrupt("journal block 0 unmapped (sparse journal?)"))?;

    let block_size = fs.sb.block_size() as u64;
    let mut buf = vec![0u8; block_size as usize];
    fs.dev.read_at(phys * block_size, &mut buf)?;
    Ok(Some(JournalSuperblock::parse(&buf)?))
}

#[cfg(test)]
mod tests {
    use super::*;

    fn jsb_with(incompat: u32) -> JournalSuperblock {
        let mut jsb = JournalSuperblock::parse(&make_v2_sb()).unwrap();
        jsb.feature_incompat = incompat;
        jsb
    }

    /// The tag sizes measured on debugfs-written journals: the distance
    /// between the second and third tag of a descriptor block, for each
    /// scheme with and without 64BIT.
    #[test]
    fn tag_sizes_are_the_measured_table() {
        let b64 = JbdIncompat::BIT64.bits();
        let v2 = JbdIncompat::CSUM_V2.bits();
        let v3 = JbdIncompat::CSUM_V3.bits();
        for (incompat, bytes) in [
            (0, 8),
            (b64, 12),
            (v2, 10),
            (v2 | b64, 14),
            (v3, 16),
            (v3 | b64, 16),
        ] {
            assert_eq!(
                jsb_with(incompat).tag_bytes(),
                bytes,
                "incompat {incompat:#x}"
            );
        }
    }

    /// The accept/refuse table the kernel and e2fsck gave for patched
    /// journal superblocks (tests/jbd2_layouts_oracle.rs runs it live).
    #[test]
    fn checksum_declarations_follow_the_observed_table() {
        let v2 = JbdIncompat::CSUM_V2.bits();
        let v3 = JbdIncompat::CSUM_V3.bits();
        let v1 = JBD2_FEATURE_COMPAT_CHECKSUM;
        let with = |compat: u32, incompat: u32, kind: u8| {
            let mut jsb = jsb_with(incompat);
            jsb.feature_compat = compat;
            jsb.checksum_type = kind;
            jsb.checksum_declaration_error().is_none()
        };
        let accepted = [
            (0, 0, 0),
            (0, 0, 4),
            (v1, 0, 0),
            (v1, 0, 1),
            (v1, 0, 4),
            (0, v2, 4),
            (0, v3, 4),
        ];
        let refused = [
            (0, v2 | v3, 4),
            (v1, v2, 4),
            (v1, v3, 4),
            (0, v2, 1),
            (0, v3, 1),
            (0, v3, 2),
            (0, v3, 0),
        ];
        for (compat, incompat, kind) in accepted {
            assert!(
                with(compat, incompat, kind),
                "{compat:#x}/{incompat:#x}/{kind}"
            );
        }
        for (compat, incompat, kind) in refused {
            assert!(
                !with(compat, incompat, kind),
                "{compat:#x}/{incompat:#x}/{kind}"
            );
        }
    }

    #[test]
    fn async_commit_and_fast_commit_are_unsupported() {
        let known =
            JbdIncompat::REVOKE.bits() | JbdIncompat::BIT64.bits() | JbdIncompat::CSUM_V3.bits();
        assert_eq!(jsb_with(known).unsupported_incompat(), 0);
        for bit in [
            JbdIncompat::ASYNC_COMMIT.bits(),
            JbdIncompat::FAST_COMMIT.bits(),
            0x8000_0000,
        ] {
            assert_eq!(jsb_with(known | bit).unsupported_incompat(), bit);
        }
    }

    /// The tail and commit checksums treat their own field as zero, so what
    /// is stored there does not change them, and every other byte does.
    #[test]
    fn block_checksums_skip_only_their_own_field() {
        let seed = jsb_with(0).csum_seed();
        let mut block = vec![0x5Au8; 4096];
        let tail = block_tail_checksum(seed, &block);
        block[4092..].fill(0xFF);
        assert_eq!(block_tail_checksum(seed, &block), tail);
        let commit = commit_block_checksum(seed, &block);
        block[COMMIT_CHECKSUM_AT..COMMIT_CHECKSUM_AT + 4].fill(0x00);
        assert_eq!(commit_block_checksum(seed, &block), commit);
        block[4091] ^= 1;
        assert_ne!(block_tail_checksum(seed, &block), tail);
        assert_ne!(commit_block_checksum(seed, &block), commit);
        assert_ne!(tag_checksum(seed, 1, &block), tag_checksum(seed, 2, &block));
    }

    /// Build a synthetic V2 superblock buffer for parser unit-testing.
    fn make_v2_sb() -> Vec<u8> {
        let mut buf = vec![0u8; 1024];
        buf[0x00..0x04].copy_from_slice(&JBD2_MAGIC_NUMBER.to_be_bytes());
        buf[0x04..0x08].copy_from_slice(&JBD2_SUPERBLOCK_V2.to_be_bytes());
        buf[0x08..0x0C].copy_from_slice(&1u32.to_be_bytes()); // header seq
        buf[0x0C..0x10].copy_from_slice(&4096u32.to_be_bytes()); // block_size
        buf[0x10..0x14].copy_from_slice(&8192u32.to_be_bytes()); // max_len
        buf[0x14..0x18].copy_from_slice(&1u32.to_be_bytes()); // first
        buf[0x18..0x1C].copy_from_slice(&42u32.to_be_bytes()); // sequence
        buf[0x1C..0x20].copy_from_slice(&0u32.to_be_bytes()); // start = 0 (clean)
        buf[0x20..0x24].copy_from_slice(&0u32.to_be_bytes()); // errno
        buf[0x24..0x28].copy_from_slice(&0u32.to_be_bytes()); // feat_compat
        buf[0x28..0x2C].copy_from_slice(
            &(JbdIncompat::REVOKE.bits() | JbdIncompat::CSUM_V3.bits()).to_be_bytes(),
        );
        buf[0x2C..0x30].copy_from_slice(&0u32.to_be_bytes()); // feat_ro
        buf[0x30..0x40].copy_from_slice(&[0xAA; 16]);
        buf[0x40..0x44].copy_from_slice(&1u32.to_be_bytes()); // nr_users
        buf[0x50] = 4; // crc32c
        buf[0xFC..0x100].copy_from_slice(&0xDEADBEEFu32.to_be_bytes());
        buf
    }

    #[test]
    fn parses_v2_superblock() {
        let buf = make_v2_sb();
        let sb = JournalSuperblock::parse(&buf).unwrap();
        assert_eq!(sb.block_type, JBD2_SUPERBLOCK_V2);
        assert_eq!(sb.block_size, 4096);
        assert_eq!(sb.max_len, 8192);
        assert_eq!(sb.first, 1);
        assert_eq!(sb.sequence, 42);
        assert!(sb.is_clean());
        assert!(sb.has_revoke());
        assert!(sb.uses_csum_v2_or_v3());
        assert!(!sb.uses_64bit());
        assert_eq!(sb.checksum_type, 4);
        assert_eq!(sb.checksum, 0xDEADBEEF);
    }

    #[test]
    fn rejects_bad_magic() {
        let mut buf = make_v2_sb();
        buf[0] = 0;
        assert!(JournalSuperblock::parse(&buf).is_err());
    }

    #[test]
    fn rejects_non_superblock_block_type() {
        let mut buf = make_v2_sb();
        buf[0x04..0x08].copy_from_slice(&JBD2_DESCRIPTOR_BLOCK.to_be_bytes());
        assert!(JournalSuperblock::parse(&buf).is_err());
    }

    #[test]
    fn v1_leaves_feature_fields_zero() {
        let mut buf = make_v2_sb();
        buf[0x04..0x08].copy_from_slice(&JBD2_SUPERBLOCK_V1.to_be_bytes());
        // Even though we wrote feature bytes, parse skips them on V1.
        let sb = JournalSuperblock::parse(&buf).unwrap();
        assert_eq!(sb.feature_incompat, 0);
        assert_eq!(sb.uuid, [0; 16]);
        assert_eq!(sb.checksum, 0);
    }

    #[test]
    fn dirty_sb_is_not_clean() {
        let mut buf = make_v2_sb();
        buf[0x1C..0x20].copy_from_slice(&100u32.to_be_bytes()); // start != 0
        let sb = JournalSuperblock::parse(&buf).unwrap();
        assert!(!sb.is_clean());
        assert_eq!(sb.start, 100);
    }
}