tango/server/

attr.rs

//! Implementation of attribute instantiations.

use std::time::{Duration, Instant, SystemTime};
use std::sync::{Arc, Mutex};
use std::cmp::Ordering;
use std::borrow::Cow;

use tracing::warn;

use crate::dev::{AttrConfig, AttrDeltaConfig, AttrInfo, AttrMemorized, AttrMode, AttrNumber, AttrQuality, AttrRangeConfig, AttrRead, 
    AttrValueEvent, Named};
use crate::value::{AttrDataKind, DevEnum, Spectrum, Value, ValueFormat};
use crate::error::{reason, Error, ErrorKind, Result};
use crate::buf::Element;

use super::def::{AttrDef, ReadFn, WriteFn};
use super::dev::{Access, Dev, ModelRef};
use super::Model;


/// An attribute of a single device, together with the last value written to it, which
/// Tango keeps aside from the model, and its configuration on that device. Its definition
/// is shared the way that of a [`Command`] is.
pub struct Attr<M: Model> {
    /// Attribute def, behind a pointer because it's a huge structure.
    def: Arc<AttrDef<M>>,
    /// The last value written to that attribute, which every read of it gives back
    /// alongside the read value, so that a client always knows what the device was asked
    /// for as well as what it does.
    /// 
    /// Behind a lock of its own rather than in [`DevMutable`]: it is updated by a write,
    /// which holds the model, and the interface store is the one lock taken *under* the
    /// model, never around it.
    w_value: Mutex<Option<Value>>,
    /// When that attribute was last written, which the delta alarm gives the device time
    /// from to reach the value written, see [`AttrDeltaConfig`]. A set point the device
    /// gives itself, or restores, is not a write and gives it none.
    w_time: Mutex<Option<Instant>>,
    /// The configuration of that attribute on its device, see [`AttrSetup`], behind a lock
    /// of its own for the same reason as the write value.
    setup: Mutex<AttrSetup>,
}

/// How an attribute is configured on its device: the configuration of its definition,
/// which the database overrides once it is asked, see [`Attr::load_config`].
struct AttrSetup {
    /// The inner attribute config that is actually being returned when getting attribute
    /// configuration.
    config: AttrConfig,
    /// What the database holds of the attribute that could not be applied, which every
    /// read and write of it fails with until the device is initialized again: an attribute
    /// whose bounds or units are not the ones it was configured with is one a client must
    /// not trust.
    error: Option<String>,
    /// Whether the database was asked for that configuration.
    loaded: bool,
    /// The memorized value the database holds for an attribute that writes it again, which
    /// is written once the model is built, see [`Attr::restore`].
    restore: Option<Value>,
    /// Why the memorized value could not be restored, which every read fails with until a
    /// write gives the attribute a value again: a client must not take for the set point a
    /// value the device was never given back.
    mem_error: Option<String>,
}

impl<M: Model> Attr<M> {

    /// A new attribute of a device, from its definition, which nothing was written to yet.
    pub(super) fn new(def: Arc<AttrDef<M>>) -> Self {
        
        let setup = AttrSetup { 
            config: def.config.clone(), 
            error: None, 
            loaded: false, 
            restore: None, 
            mem_error: None,
        };

        Self { 
            def, 
            w_value: Mutex::new(None), 
            w_time: Mutex::new(None),
            setup: Mutex::new(setup),
        }

    }

    /// The name of that attribute, as its definition gave it.
    #[inline]
    pub fn name(&self) -> &str {
        &self.def.name
    }

    /// The configuration of that attribute on its device.
    pub fn config(&self) -> AttrConfig {
        self.setup.lock().unwrap().config.clone()
    }

    /// Whether the database was asked for the configuration of that attribute, which is
    /// done for the whole device at once, see [`Dev::init`].
    pub(super) fn is_loaded(&self) -> bool {
        self.setup.lock().unwrap().loaded
    }

    /// Whether that attribute has any alarm configured: a bound of its alarm or warning
    /// range, or a delta, which is what a device in alarm looks at, see
    /// [`Dev::set_auto_alarm_states`].
    pub(super) fn has_alarms(&self) -> bool {
        let config = &self.setup.lock().unwrap().config;
        config.alarm.is_set() || config.warning.is_set() || config.delta.is_some()
    }

    /// Configure that attribute from what the database holds of it: the properties it holds
    /// for the attribute at the level of the class and then of the device, the device
    /// overriding the class, and both the definition.
    /// 
    /// A level the database could not be asked for, and a property that cannot be applied,
    /// leave what came before them in place and are kept as the error of the attribute, see
    /// [`AttrSetup::error`].
    /// 
    /// The memorized value of the attribute, which only the device holds, is taken here
    /// too the first time: it is the set point right away for an attribute that only
    /// restores it, and is kept to be written for one that writes it again, see
    /// [`Self::restore`]. Configuring it again, once a client changed its configuration,
    /// leaves its set point alone.
    pub(super) fn load_config(&self, dev: &Dev<M>, class: PropsResult<'_>, device: PropsResult<'_>) {

        let mut loader = ConfigLoader::new(&self.def.config, self.def.kind);
        loader.apply_level("class", class);
        loader.apply_level("device", device);

        let (config, mut error) = loader.finish();
        if let Some(incoherence) = incoherence(&config) {
            error = Some(match error {
                Some(error) => format!("{error}, {incoherence}"),
                None => incoherence,
            });
        }

        if let Some(error) = &error {
            warn!(dev = %dev.name(), attr = %self.name(), err = %error, "Failed to configure the attribute from the database");
        }

        let mut setup = self.setup.lock().unwrap();
        if setup.loaded {
            setup.config = config;
            setup.error = error;
            return;
        }

        let mut restore = None;
        let mut mem_error = None;

        // Check if the device attribute properties have a __value property...
        let mem_value = device.ok()
            .and_then(|props| props
                .iter()
                .find(|prop| prop.name.value().eq_ignore_ascii_case(MEM_VALUE)));

        if let (Some(mode), Some(mem_value)) = (self.def.memorized, mem_value) {
            match parse_mem_value(self.def.kind.as_ref(), &mem_value.value) {
                Ok(None) => {}
                Ok(Some(value)) => match mode {
                    AttrMemorized::RestoreSetPoint => *self.w_value.lock().unwrap() = Some(value),
                    AttrMemorized::RestoreAndWrite => restore = Some(value),
                }
                Err(err) => {
                    warn!(dev = %dev.name(), attr = %self.name(), %err, "Failed to parse the memorized value");
                    mem_error = Some(format!("the memorized value cannot be parsed: {err}"));
                }
            }
        }

        *setup = AttrSetup { 
            config, 
            error, 
            loaded: true, 
            restore, 
            mem_error,
        };

    }

    /// Change the configuration of that attribute to the requested one, given what the
    /// database holds for its class, giving back what that does to what the database holds
    /// for it on its device.
    /// 
    /// The requested configuration is the whole configuration the attribute is to have, which
    /// a client gets by reading the one it has and changing what it means to, so every field
    /// is one of:
    /// 
    /// - what the attribute has already, which is left alone;
    /// - a value, stored for the device, unless it is what the device inherits, in which case
    ///   the device has nothing of its own to store and it is deleted;
    /// - no value, which brings the field back to what the device inherits, deleting what it
    ///   has of its own.
    /// 
    /// No value therefore never means *no value* when the device inherits one, which is the
    /// one thing cppTango does that this does not: forcing the library default over the
    /// defaults of the class.
    /// 
    /// The requested configuration is refused, nothing being changed, if it gives a value
    /// to a property the kind of the attribute does not support, see
    /// [`ConfigProp::supported_by`]. The configuration the attribute ends up with is refused
    /// too if it is incoherent, see [`incoherence`], or if it leaves out the set point of a memorized
    /// attribute, which its next initialization would then fail to restore. Once changed, the
    /// error of the attribute is what could not be applied of its class, see
    /// [`AttrSetup::error`].
    pub(super) fn change_config(&self, class: &[Named<Spectrum<str>>], requested: &AttrConfig) -> std::result::Result<ConfigChanges, String> {

        // What the device inherits, the definition which the class overrides, which is what
        // the configuration it ends up with starts from: every field is the inherited one
        // unless the device has one of its own.
        let mut config = ConfigLoader::new(&self.def.config, self.def.kind);
        config.apply_level("class", Ok(class));
        let (mut config, class_error) = config.finish();

        if let Some(prop) = unsupported_prop(requested, self.def.kind) {
            return Err(format!("its property {:?} is {}", prop.name(), unsupported(self.def.kind)));
        }

        let w_value = self.def.memorized.and_then(|_| self.w_value.lock().unwrap().clone());

        let mut setup = self.setup.lock().unwrap();
        let mut changes = ConfigChanges::default();

        for prop in ConfigProp::ALL {

            let target = prop_value(requested, prop);
            let now = prop_value(&setup.config, prop);
            let inherited = prop_value(&config, prop);

            if target.is_unset() || target == inherited {
                // The device has something of its own only if what it has is not inherited.
                if now != inherited {
                    changes.del.push(prop);
                }
            } else {
                if target != now {
                    changes.put.push((prop, target.to_values()));
                }
                copy_prop(&mut config, requested, prop);
            }

        }

        if let Some(incoherence) = incoherence(&config) {
            return Err(incoherence);
        }

        if let Some(w_value) = &w_value {
            if any_number(w_value, |number| outside(&config.range, number)) {
                return Err("its memorized value would be outside of its range".to_string());
            }
        }

        // The configuration is the requested one over the inherited one, so what could not
        // be applied of the class is all that is left wrong with it.
        setup.config = config;
        setup.error = class_error;
        Ok(changes)

    }

    /// Write the memorized value the database held for that attribute, if it writes it
    /// again and its device has just been initialized into that model, see
    /// [`AttrMemorized::RestoreAndWrite`]. The value is written as a client would write
    /// it, but is not stored again, being the one the database already holds.
    /// 
    /// An attribute whose configuration could not be applied is not written: its bounds
    /// are not the ones it was configured with.
    pub(super) async fn restore(&self, dev: &Dev<M>, model: &mut M) {

        let Some(value) = self.setup.lock().unwrap().restore.take() else {
            return;
        };

        if self.check_config(dev, false).is_err() {
            return;
        }

        if let Err(err) = self.write_inner(dev, &mut ModelRef::Exclusive(model), value).await {
            warn!(dev = %dev.name(), attr = %self.name(), %err, "Failed to write the memorized value back");
            self.setup.lock().unwrap().mem_error = Some(format!("the memorized value cannot be \
                written back: {}", err.description()));
        }

    }

    /// Fail if the configuration of that attribute could not be applied, see
    /// [`AttrSetup::error`], and, when asked to, if its memorized value could not be
    /// restored, see [`AttrSetup::mem_error`], which only fails a read: a write is what
    /// gives the attribute a set point again.
    fn check_config(&self, dev: &Dev<M>, check_mem: bool) -> Result<()> {
        
        let setup = self.setup.lock().unwrap();
        
        if let Some(error) = &setup.error {
            return Err(Error::new(ErrorKind::Reason(reason::API_AttrConfig))
                .with_description(format!("The attribute {:?} of the device {:?} has a wrong \
                    configuration in the database: {error}", self.name(), dev.name())));
        }

        if check_mem && let Some(error) = &setup.mem_error {
            return Err(Error::new(ErrorKind::Reason(reason::API_MemAttFailedDuringInit))
                .with_description(format!("The attribute {:?} of the device {:?} has no set \
                    point, {error}, it has to be written again", self.name(), dev.name())));
        }

        Ok(())

    }

    /// Whether that attribute is memorized, see [`AttrMemorized`].
    #[inline]
    pub fn is_memorized(&self) -> bool {
        self.def.memorized.is_some()
    }

    /// Give that attribute a new set point without writing it: the write function is not
    /// called, and the value is what every read gives back as the write value from then
    /// on, and what the database remembers of a memorized attribute.
    /// 
    /// This is for a device whose set point changes by itself, a motor stopped short of its
    /// target for instance, so that a client and the next initialization find the value
    /// the device actually works towards.
    pub(super) async fn set_w_value(&self, dev: &Dev<M>, value: Value) -> Result<()> {
        *self.w_value.lock().unwrap() = Some(value.clone());
        self.setup.lock().unwrap().mem_error = None;
        self.store(dev, &value).await
    }

    /// Store that value as the memorized value of that attribute, if it is memorized.
    async fn store(&self, dev: &Dev<M>, value: &Value) -> Result<()> {
        if self.def.memorized.is_none() {
            return Ok(());
        }
        let mem_value = mem_value_str(value)
            .map_err(|err| Error::new(ErrorKind::Reason(reason::API_AttrConfig))
                .with_description(format!("The attribute {:?} of the device {:?} cannot be \
                    memorized: {err}", self.name(), dev.name())))?;
        dev.server().database()
            .set_dev_attr_prop_async(dev.name(), (self.name(), (MEM_VALUE, mem_value)))
            .await
    }

    /// The access reading that attribute needs to the model.
    pub(super) fn read_access(&self) -> Access {
        match &self.def.read {
            Some(ReadFn::ExclusiveSync(_) | ReadFn::ExclusiveAsync(_)) => Access::Exclusive,
            _ => Access::Shared,
        }
    }

    /// The access writing that attribute needs to the model.
    pub(super) fn write_access(&self) -> Access {
        match &self.def.write {
            Some(WriteFn::ExclusiveSync(_) | WriteFn::ExclusiveAsync(_)) => Access::Exclusive,
            _ => Access::Shared,
        }
    }

    /// Whether reading that attribute may block, its read function being synchronous, see
    /// [`crate::pool::run`].
    pub(super) fn read_may_block(&self) -> bool {
        matches!(&self.def.read, Some(ReadFn::SharedSync(_) | ReadFn::ExclusiveSync(_)))
    }

    /// Whether writing that attribute may block, see [`Self::read_may_block`].
    pub(super) fn write_may_block(&self) -> bool {
        matches!(&self.def.write, Some(WriteFn::SharedSync(_) | WriteFn::ExclusiveSync(_)))
    }

    /// What a client is told of that attribute: what it may read and change of its
    /// configuration, and what its definition advertises of its data.
    /// 
    /// A definition advertising neither a kind nor a format, which only one built out of a
    /// raw handler and given neither can be, has nothing to tell a client of its data and
    /// is answered with an error rather than with a guess.
    /// 
    /// An attribute whose configuration could not be applied is described all the same,
    /// with what could be, so that a client can still see what it is configured with.
    /// 
    /// TODO: [`AttrMode::ReadWithWrite`] cannot be derived from the handlers, the write
    /// attribute it is paired with having to be named; it needs its own definition.
    pub fn info(&self) -> Result<AttrInfo> {
        self.info_as(match (&self.def.read, &self.def.write) {
            (Some(_), Some(_)) => AttrMode::ReadWrite,
            (Some(_), None) => AttrMode::Read,
            (None, Some(_)) => AttrMode::Write,
            // An attribute that has no handler yet is advertised as anything a handler
            // could make it, every read and write of it failing, see [`Self::no_handler_err`].
            (None, None) => AttrMode::ReadWrite,
        })
    }

    /// The error of reading or writing that attribute when it has no handler at all, see
    /// [`Self::info`].
    fn no_handler_err(&self, dev: &Dev<M>) -> Error {
        Error::not_implemented()
            .with_description(format!("The attribute {} of the device {} has no handler defined",
                self.name(), dev.name()))
    }

    /// Refuse a subscription to the events of that kind of that attribute if nothing ever
    /// sends them, and a push of one the device did not declare: the change and archive events are only sent once the device declares it
    /// pushes them, see [`AttrDef::push_change_event`], and the periodic ones never with no
    /// polling. The user and alarm events, which only a device pushes, are always allowed,
    /// as cppTango allows them.
    pub(super) fn check_push_event(&self, dev: &Dev<M>, event: AttrValueEvent) -> Result<()> {

        let pushed = match event {
            AttrValueEvent::Change => self.def.pushed.change.is_some(),
            AttrValueEvent::Archive => self.def.pushed.archive.is_some(),
            AttrValueEvent::Periodic => false,
            AttrValueEvent::User | 
            AttrValueEvent::Alarm => true,
        };

        if pushed {
            return Ok(());
        }

        Err(Error::new(ErrorKind::Reason(reason::API_AttributePollingNotStarted))
            .with_description(format!("The polling (necessary to send events) for the attribute {} \
                of the device {} is not started, and the device does not push its {event:?} events",
                self.name(), 
                dev.name())))

    }

    /// What a client is told of that attribute, accessed in that mode whatever its
    /// handlers, which is how the State and the Status are described: they are read
    /// through the device rather than through a handler of their own, see [`Self::info`].
    pub(super) fn info_as(&self, mode: AttrMode) -> Result<AttrInfo> {
        Ok(AttrInfo {
            config: self.config(),
            mode,
            data_kind: self.def.kind
                .ok_or_else(|| Error::new(ErrorKind::Internal)
                    .with_description(format!("The attribute {} does not advertise the kind \
                        of its data", self.name())))?,
            data_format: self.def.format
                .ok_or_else(|| Error::new(ErrorKind::Internal)
                    .with_description(format!("The attribute {} does not advertise the \
                        format of its data", self.name())))?,
            display_level: self.def.display_level,
            memorized: self.def.memorized,
        })
    }

    /// The alarm that reading is in: the one the read function gave it, or else the one
    /// the configuration of that attribute puts it in, outside of the alarm range, outside
    /// of the warning range, or too far from the value written for longer than the device
    /// is given to reach it, see [`AttrDeltaConfig`].
    /// 
    /// A quality the read function gave is never overridden, the device always having the
    /// last word on the quality of its own readings, and it counts the way cppTango counts
    /// it: an ALARM or a WARNING it gave is an alarm all the same.
    fn alarm(&self, read: &AttrRead<Value>) -> Option<AttrAlarm> {

        let value = match (read.quality, &read.value) {
            (AttrQuality::Alarm | AttrQuality::Warning, _) => return Some(AttrAlarm::Device(read.quality)),
            (AttrQuality::Valid, Some(value)) => value,
            _ => return None,
        };

        let (alarm, warning, delta) = {
            let config = &self.setup.lock().unwrap().config;
            (config.alarm, config.warning, config.delta)
        };

        if any_number(value, |number| outside(&alarm, number)) {
            return Some(AttrAlarm::Alarm);
        }

        if any_number(value, |number| outside(&warning, number)) {
            return Some(AttrAlarm::Warning);
        }

        if let (Some(delta), Some(w_value)) = (delta, &read.w_value) {
            let written = *self.w_time.lock().unwrap();
            let settled = written.is_some_and(|time| time.elapsed() >= delta.time.unwrap_or_default());
            if settled && drifted(value, w_value, delta.value) {
                return Some(AttrAlarm::Delta);
            }
        }

        None

    }

    /// Read that attribute, see [`Self::read`], giving back along with the reading the
    /// alarm its configuration puts it in, if any, see [`Self::alarm`].
    pub(super) async fn read_with_alarm(&self, dev: &Dev<M>, model: &mut ModelRef<'_, M>) -> Result<(AttrRead<Value>, Option<AttrAlarm>)> {
        let mut read = self.read_inner(dev, model).await?;
        let alarm = self.alarm(&read);
        if let Some(alarm) = alarm {
            read.quality = alarm.quality();
        }
        Ok((read, alarm))
    }

    /// Read that attribute on the model, borrowed with the access [`Self::read_access`]
    /// asked for, its quality being the one its configuration gives it, see
    /// [`Self::alarm`].
    pub(super) async fn read(&self, dev: &Dev<M>, model: &mut ModelRef<'_, M>) -> Result<AttrRead<Value>> {
        self.read_with_alarm(dev, model).await.map(|(read, _)| read)
    }

    /// Read that attribute as its device gives it, see [`Self::read`].
    async fn read_inner(&self, dev: &Dev<M>, model: &mut ModelRef<'_, M>) -> Result<AttrRead<Value>> {

        self.check_config(dev, true)?;

        let mut read = match &self.def.read {
            Some(ReadFn::SharedSync(func)) => func(model.shared(), dev)?,
            Some(ReadFn::ExclusiveSync(func)) => func(model.exclusive()?, dev)?,
            Some(ReadFn::SharedAsync(func)) => func(model.shared(), dev).await?,
            Some(ReadFn::ExclusiveAsync(func)) => func(model.exclusive()?, dev).await?,
            None if self.def.write.is_none() => return Err(self.no_handler_err(dev)),
            // A write-only attribute has nothing to read but what was written to it, which
            // is what Tango gives for one: the set point back, and no read value, rather
            // than an error.
            None => AttrRead {
                value: None,
                w_value: None,
                quality: AttrQuality::Valid,
                time: SystemTime::now(),
            },
        };

        self.merge_w_value(&mut read);
        Ok(read)

    }

    /// Give a reading that has no write value the last one that was written, and keep the
    /// write value of one that has it, so that the readings that follow give that one back.
    /// Either way what a client gets, read or pushed, does not depend on the model having
    /// kept the value it was written.
    pub(super) fn merge_w_value(&self, read: &mut AttrRead<Value>) {
        match &read.w_value {
            None => read.w_value = self.w_value.lock().unwrap().clone(),
            Some(w_value) => *self.w_value.lock().unwrap() = Some(w_value.clone()),
        }
    }

    /// Write that attribute on the model, borrowed with the access [`Self::write_access`]
    /// asked for, keep the value that was written and store it if the attribute is
    /// memorized.
    /// 
    /// A value the device accepted but the database could not store fails the write all
    /// the same, the way cppTango does: it is the set point of the device, but not the one
    /// its next initialization finds.
    pub(super) async fn write(&self, dev: &Dev<M>, model: &mut ModelRef<'_, M>, value: Value) -> Result<()> {
        self.check_config(dev, false)?;
        self.write_inner(dev, model, value.clone()).await?;
        self.store(dev, &value).await
    }

    /// Write that attribute on the model and keep the value that was written, see
    /// [`Self::write`].
    async fn write_inner(&self, dev: &Dev<M>, model: &mut ModelRef<'_, M>, value: Value) -> Result<()> {

        self.check_limits(dev, &value)?;

        // The handler and the server share the written value, the server keeping it for
        // the reads.
        match &self.def.write {
            Some(WriteFn::SharedSync(func)) => func(model.shared(), dev, value.clone())?,
            Some(WriteFn::ExclusiveSync(func)) => func(model.exclusive()?, dev, value.clone())?,
            Some(WriteFn::SharedAsync(func)) => func(model.shared(), dev, value.clone()).await?,
            Some(WriteFn::ExclusiveAsync(func)) => func(model.exclusive()?, dev, value.clone()).await?,
            None if self.def.read.is_none() => return Err(self.no_handler_err(dev)),
            None => return Err(Error::new(ErrorKind::AttrNotWritable)
                .with_append_description(format_args!("Attribute {:?} of the device {:?}",
                    self.name(), dev.name()))),
        }

        // Only a write the device accepted is remembered: a write value a client reads
        // back is one the device is actually working towards, which also gives back a set
        // point to an attribute whose memorized value could not be restored.
        *self.w_value.lock().unwrap() = Some(value);
        *self.w_time.lock().unwrap() = Some(Instant::now());
        self.setup.lock().unwrap().mem_error = None;
        Ok(())

    }

    /// Fail if a number of that value is outside the range of values of that attribute,
    /// which is the range a value written to it has to be in, see [`AttrConfig::range`].
    /// A value that is not a number has no range to be outside of.
    fn check_limits(&self, dev: &Dev<M>, value: &Value) -> Result<()> {

        let range = self.setup.lock().unwrap().config.range;
        if !any_number(value, |number| outside(&range, number)) {
            return Ok(());
        }

        let bound = |bound: Option<AttrNumber>| bound.map_or_else(|| "-".to_string(), |bound| bound.to_string());
        Err(Error::new(ErrorKind::Reason(reason::API_WAttrOutsideLimit))
            .with_description(format!("The value written to the attribute {:?} of the device {:?} is \
                outside of its range [{}, {}]", self.name(), dev.name(), bound(range.min), bound(range.max))))
        
    }

}

/// The alarm the configuration of an attribute puts a reading of it in, see
/// [`Attr::alarm`].
#[derive(Debug, Clone, Copy, PartialEq, Eq)]
pub enum AttrAlarm {
    /// Outside of the alarm range.
    Alarm,
    /// Outside of the warning range.
    Warning,
    /// Too far from the value written.
    Delta,
    /// In that quality, which the read function gave it.
    Device(AttrQuality),
}

impl AttrAlarm {

    /// The quality of a reading in that alarm.
    pub fn quality(self) -> AttrQuality {
        match self {
            Self::Alarm | Self::Delta => AttrQuality::Alarm,
            Self::Warning => AttrQuality::Warning,
            Self::Device(quality) => quality,
        }
    }

    /// Why an attribute of that name is in that alarm, as the status of its device says.
    pub fn describe(self, name: &str) -> String {
        match self {
            Self::Alarm => format!("Alarm: the attribute {name} is outside of its alarm range"),
            Self::Warning => format!("Warning: the attribute {name} is outside of its warning range"),
            Self::Delta => format!("Alarm: the attribute {name} is too far from the value written to it"),
            Self::Device(AttrQuality::Warning) => format!("Warning: the attribute {name} is in WARNING"),
            Self::Device(_) => format!("Alarm: the attribute {name} is in ALARM"),
        }
    }

}

// =========================== //
//           Limits            //
// =========================== //

/// Whether that predicate holds for any number of that value, a value of a kind that is
/// not a number having none: every element of an array is one of its numbers.
fn any_number(value: &Value, mut pred: impl FnMut(AttrNumber) -> bool) -> bool {

    macro_rules! any {
        ($format:expr) => {
            match $format {
                ValueFormat::Scalar(data) => data.iter().any(|number| pred(number.into())),
                ValueFormat::Spectrum(data) => data.iter().any(|number| pred(number.into())),
                ValueFormat::Image(data) => data.iter().any(|number| pred(number.into())),
            }
        };
    }

    match value {
        Value::Octet(format) => any!(format),
        Value::UShort(format) => any!(format),
        Value::Short(format) => any!(format),
        Value::ULong(format) => any!(format),
        Value::Long(format) => any!(format),
        Value::ULong64(format) => any!(format),
        Value::Long64(format) => any!(format),
        Value::Float(format) => any!(format),
        Value::Double(format) => any!(format),
        _ => false,
    }

}

/// Whether that number is outside of that range, both bounds being part of it, a number
/// that cannot be compared with a bound, a not-a-number, being outside of any.
fn outside(range: &AttrRangeConfig, number: AttrNumber) -> bool {
    let below = range.min.is_some_and(|min| number.partial_cmp(&min).is_none_or(Ordering::is_lt));
    let above = range.max.is_some_and(|max| number.partial_cmp(&max).is_none_or(Ordering::is_gt));
    below || above
}

/// Whether a number of the read value is further than that from the number of the value
/// written at the same place, the two being compared element by element.
fn drifted(read: &Value, written: &Value, delta: AttrNumber) -> bool {

    let mut written_numbers = Vec::new();
    any_number(written, |number| {
        written_numbers.push(number.as_f64());
        false
    });
    
    let delta = delta.as_f64();
    let mut written_numbers = written_numbers.into_iter();
    any_number(read, |number| written_numbers.next()
        .is_some_and(|written| (number.as_f64() - written).abs() > delta))
    
}

// =========================== //
//   Database configuration    //
// =========================== //

/// What the database holds for an attribute at one level, or why it could not be asked.
pub type PropsResult<'a> = std::result::Result<&'a [Named<Spectrum<str>>], &'a Error>;

// The strings standing for a property that has no value, which bring the field back to no
// value at all whatever the levels below gave it, see `NOT_SPECIFIED` in the CORBA module.
const NOT_SPECIFIED: &str = "Not specified";
const NOT_A_NUMBER: &str = "NaN";

/// The configuration of an attribute being built out of the properties the database holds
/// for it, starting from the one of its definition.
struct ConfigLoader {
    config: AttrConfig,
    /// The data kind of that attribute, which its limits are read as, and which some
    /// properties are not supported by, see [`ConfigProp::supported_by`].
    kind: Option<AttrDataKind>,
    /// The two halves of the delta alarm, which are two properties that each level may give
    /// one of, and which only make an alarm together, see [`Self::finish`].
    delta_value: Option<AttrNumber>,
    delta_time: Option<Duration>,
    /// Every property that could not be applied, described.
    errors: Vec<String>,
}

impl ConfigLoader {

    fn new(config: &AttrConfig, kind: Option<AttrDataKind>) -> Self {
        Self {
            config: config.clone(),
            kind,
            delta_value: config.delta.map(|delta| delta.value),
            delta_time: config.delta.and_then(|delta| delta.time),
            errors: Vec::new(),
        }
    }

    /// Apply every property the database holds at that level, named after it in the errors.
    fn apply_level(&mut self, level: &str, props: PropsResult<'_>) {
        match props {
            Ok(props) => {
                for prop in props {
                    if let Err(err) = self.apply(prop.name.value(), &prop.value) {
                        self.errors.push(format!("{level} property {:?}: {err}", prop.name.value()));
                    }
                }
            }
            Err(err) => self.errors.push(format!("{level} properties: {}", err.description())),
        }
    }

    /// Apply the property of that name. A property that is not one of the configuration is
    /// left alone: the database holds more of an attribute than its configuration, the
    /// value of a memorized one for instance.
    fn apply(&mut self, name: &str, values: &Spectrum<str>) -> std::result::Result<(), String> {
        match ConfigProp::from_name(name) {
            Some(prop) => self.apply_prop(prop, values),
            None => Ok(()),
        }
    }

    /// Apply that property, see [`Self::apply`]. A property the kind of the attribute does
    /// not support is refused unless it has no value.
    fn apply_prop(&mut self, prop: ConfigProp, values: &Spectrum<str>) -> std::result::Result<(), String> {

        if !prop.supported_by(self.kind) {
            return match values.iter().all(|value| is_unset(value.trim())) {
                true => Ok(()),
                false => Err(unsupported(self.kind)),
            };
        }
        
        let config = &mut self.config;
        let limits = limit_kind(self.kind);
        
        match prop {
            ConfigProp::Description => config.doc = text(values),
            ConfigProp::Label => config.label = text(values),
            ConfigProp::Unit => config.unit = text(values),
            ConfigProp::StandardUnit => config.standard_unit = number(values)?,
            ConfigProp::DisplayUnit => config.display_unit = text(values),
            ConfigProp::Format => config.display_format = text(values),
            ConfigProp::MinValue => config.range.min = limit(values, limits)?,
            ConfigProp::MaxValue => config.range.max = limit(values, limits)?,
            ConfigProp::MinAlarm => config.alarm.min = limit(values, limits)?,
            ConfigProp::MaxAlarm => config.alarm.max = limit(values, limits)?,
            ConfigProp::MinWarning => config.warning.min = limit(values, limits)?,
            ConfigProp::MaxWarning => config.warning.max = limit(values, limits)?,
            ConfigProp::DeltaVal => self.delta_value = limit(values, limits)?,
            // A delta time of zero is how cppTango says there is none.
            ConfigProp::DeltaT => self.delta_time = duration(values)?.filter(|time| !time.is_zero()),
            ConfigProp::RelChange => config.change_event.rel_change = change(values)?,
            ConfigProp::AbsChange => config.change_event.abs_change = change(values)?,
            ConfigProp::EventPeriod => config.periodic_event.period = duration(values)?,
            ConfigProp::ArchiveRelChange => config.archive_event.rel_change = change(values)?,
            ConfigProp::ArchiveAbsChange => config.archive_event.abs_change = change(values)?,
            ConfigProp::ArchivePeriod => config.archive_event.period = duration(values)?,
            ConfigProp::EnumLabels => config.enum_labels = labels(values),
        }

        Ok(())

    }

    /// The configuration that was built, and the error of what could not be applied.
    fn finish(self) -> (AttrConfig, Option<String>) {
        let mut config = self.config;
        config.delta = self.delta_value.map(|value| AttrDeltaConfig { value, time: self.delta_time });
        let error = (!self.errors.is_empty()).then(|| self.errors.join(", "));
        (config, error)
    }

}

/// The value of one property of a configuration, borrowed from it, which is what two
/// configurations are compared by, property by property, with nothing written out: two
/// values that parse the same are the same value, however they were written.
#[derive(Debug, Clone, Copy, PartialEq)]
enum ConfigPropValue<'a> {
    Text(Option<&'a str>),
    Number(Option<f64>),
    Limit(Option<AttrNumber>),
    Duration(Option<Duration>),
    Labels(&'a [Cow<'static, str>]),
}

impl ConfigPropValue<'_> {

    /// Whether that property has no value.
    fn is_unset(self) -> bool {
        match self {
            Self::Text(text) => text.is_none(),
            Self::Number(number) => number.is_none(),
            Self::Limit(limit) => limit.is_none(),
            Self::Duration(duration) => duration.is_none(),
            Self::Labels(labels) => labels.is_empty(),
        }
    }

    /// The values that property is stored as, a property with no value being stored as
    /// [`NOT_SPECIFIED`], a text being one value per line and a duration a number of
    /// milliseconds.
    fn to_values(self) -> Vec<String> {
        if self.is_unset() {
            return vec![NOT_SPECIFIED.to_string()];
        }
        match self {
            Self::Text(text) => text.unwrap_or_default().split('\n').map(str::to_string).collect(),
            Self::Number(number) => number.iter().map(f64::to_string).collect(),
            Self::Limit(limit) => limit.iter().map(AttrNumber::to_string).collect(),
            Self::Duration(duration) => duration.iter().map(|duration| (duration.as_secs_f64() * 1000.0).to_string()).collect(),
            Self::Labels(labels) => labels.iter().map(|label| label.to_string()).collect(),
        }
    }

}

/// The value of that property of that configuration, see [`ConfigPropValue`].
fn prop_value(config: &AttrConfig, prop: ConfigProp) -> ConfigPropValue<'_> {
    match prop {
        ConfigProp::Description => ConfigPropValue::Text(config.doc.as_deref()),
        ConfigProp::Label => ConfigPropValue::Text(config.label.as_deref()),
        ConfigProp::Unit => ConfigPropValue::Text(config.unit.as_deref()),
        ConfigProp::StandardUnit => ConfigPropValue::Number(config.standard_unit),
        ConfigProp::DisplayUnit => ConfigPropValue::Text(config.display_unit.as_deref()),
        ConfigProp::Format => ConfigPropValue::Text(config.display_format.as_deref()),
        ConfigProp::MinValue => ConfigPropValue::Limit(config.range.min),
        ConfigProp::MaxValue => ConfigPropValue::Limit(config.range.max),
        ConfigProp::MinAlarm => ConfigPropValue::Limit(config.alarm.min),
        ConfigProp::MaxAlarm => ConfigPropValue::Limit(config.alarm.max),
        ConfigProp::MinWarning => ConfigPropValue::Limit(config.warning.min),
        ConfigProp::MaxWarning => ConfigPropValue::Limit(config.warning.max),
        ConfigProp::DeltaVal => ConfigPropValue::Limit(config.delta.map(|delta| delta.value)),
        ConfigProp::DeltaT => ConfigPropValue::Duration(config.delta.and_then(|delta| delta.time)),
        ConfigProp::RelChange => ConfigPropValue::Number(config.change_event.rel_change),
        ConfigProp::AbsChange => ConfigPropValue::Number(config.change_event.abs_change),
        ConfigProp::EventPeriod => ConfigPropValue::Duration(config.periodic_event.period),
        ConfigProp::ArchiveRelChange => ConfigPropValue::Number(config.archive_event.rel_change),
        ConfigProp::ArchiveAbsChange => ConfigPropValue::Number(config.archive_event.abs_change),
        ConfigProp::ArchivePeriod => ConfigPropValue::Duration(config.archive_event.period),
        ConfigProp::EnumLabels => ConfigPropValue::Labels(&config.enum_labels),
    }
}

/// The attribute properties of the database that are part of the configuration of an
/// attribute, see [`ConfigLoader::apply`].
#[derive(Debug, Clone, Copy, PartialEq, Eq)]
pub enum ConfigProp {
    Description,
    Label,
    Unit,
    StandardUnit,
    DisplayUnit,
    Format,
    MinValue,
    MaxValue,
    MinAlarm,
    MaxAlarm,
    MinWarning,
    MaxWarning,
    DeltaVal,
    DeltaT,
    RelChange,
    AbsChange,
    EventPeriod,
    ArchiveRelChange,
    ArchiveAbsChange,
    ArchivePeriod,
    EnumLabels,
}

impl ConfigProp {

    /// Every property.
    const ALL: [Self; 21] = [
        Self::Description,
        Self::Label,
        Self::Unit,
        Self::StandardUnit,
        Self::DisplayUnit,
        Self::Format,
        Self::MinValue,
        Self::MaxValue,
        Self::MinAlarm,
        Self::MaxAlarm,
        Self::MinWarning,
        Self::MaxWarning,
        Self::DeltaVal,
        Self::DeltaT,
        Self::RelChange,
        Self::AbsChange,
        Self::EventPeriod,
        Self::ArchiveRelChange,
        Self::ArchiveAbsChange,
        Self::ArchivePeriod,
        Self::EnumLabels,
    ];

    /// The name the database holds that property under.
    pub fn name(self) -> &'static str {
        match self {
            Self::Description => "description",
            Self::Label => "label",
            Self::Unit => "unit",
            Self::StandardUnit => "standard_unit",
            Self::DisplayUnit => "display_unit",
            Self::Format => "format",
            Self::MinValue => "min_value",
            Self::MaxValue => "max_value",
            Self::MinAlarm => "min_alarm",
            Self::MaxAlarm => "max_alarm",
            Self::MinWarning => "min_warning",
            Self::MaxWarning => "max_warning",
            Self::DeltaVal => "delta_val",
            Self::DeltaT => "delta_t",
            Self::RelChange => "rel_change",
            Self::AbsChange => "abs_change",
            Self::EventPeriod => "event_period",
            Self::ArchiveRelChange => "archive_rel_change",
            Self::ArchiveAbsChange => "archive_abs_change",
            Self::ArchivePeriod => "archive_period",
            Self::EnumLabels => "enum_labels",
        }
    }

    /// Whether an attribute of that kind supports that property: the bounds, the delta and
    /// the change criteria are values of the attribute, which only a number has, and an
    /// enumerated attribute has no alarm, the way cppTango refuses them.
    fn supported_by(self, kind: Option<AttrDataKind>) -> bool {
        let numeric = !matches!(kind, None | Some(AttrDataKind::Bool | AttrDataKind::State | AttrDataKind::String | AttrDataKind::Encoded));
        match self {
            Self::MinAlarm | 
            Self::MaxAlarm | 
            Self::MinWarning | 
            Self::MaxWarning => numeric && kind != Some(AttrDataKind::Enum),
            Self::MinValue | 
            Self::MaxValue | 
            Self::DeltaVal | 
            Self::DeltaT | 
            Self::RelChange | 
            Self::AbsChange |
            Self::ArchiveRelChange | 
            Self::ArchiveAbsChange => numeric,
            _ => true,
        }
    }

    /// The property of that name, matched ignoring the case like any name the database
    /// holds, absent for one that is not part of the configuration.
    fn from_name(name: &str) -> Option<Self> {
        Self::ALL.into_iter().find(|prop| name.eq_ignore_ascii_case(prop.name()))
    }

}

/// Whether that value of a property stands for no value at all.
fn is_unset(value: &str) -> bool {
    value.is_empty() || value.eq_ignore_ascii_case(NOT_SPECIFIED) || value.eq_ignore_ascii_case(NOT_A_NUMBER)
}

/// A property that is a text, every line of which is one of its values.
fn text(values: &Spectrum<str>) -> Option<Cow<'static, str>> {
    let text = values.iter().collect::<Vec<_>>().join("\n");
    (!is_unset(text.trim())).then_some(Cow::Owned(text))
}

/// The value of a property that has a single one, absent for one that has none.
fn single(values: &Spectrum<str>) -> std::result::Result<Option<&str>, String> {
    let mut iter = values.iter().map(str::trim);
    match (iter.next(), iter.next()) {
        (None, _) => Ok(None),
        (Some(value), None) => Ok((!is_unset(value)).then_some(value)),
        (Some(_), Some(_)) => Err(format!("expected a single value, got {}", values.len())),
    }
}

/// Parse that value as a finite number.
fn parse_number(value: &str) -> std::result::Result<f64, String> {
    value.parse::<f64>().ok()
        .filter(|value| value.is_finite())
        .ok_or_else(|| format!("{value:?} is not a number"))
}

/// A property that is a number.
fn number(values: &Spectrum<str>) -> std::result::Result<Option<f64>, String> {
    single(values)?.map(parse_number).transpose()
}

/// A property that is a limit, which is a value of the attribute and is read as its type,
/// a value that type cannot hold being read as a double, see [`AttrNumber`].
fn limit(values: &Spectrum<str>, kind: LimitKind) -> std::result::Result<Option<AttrNumber>, String> {
    
    let Some(value) = single(values)? else {
        return Ok(None);
    };
    
    let typed = match kind {
        LimitKind::Long => value.parse::<i64>().ok().map(AttrNumber::Long),
        LimitKind::ULong => value.parse::<u64>().ok().map(AttrNumber::ULong),
        LimitKind::Double => None,
    };

    match typed {
        Some(typed) => Ok(Some(typed)),
        None => parse_number(value).map(|value| Some(AttrNumber::Double(value))),
    }

}

/// A property that is a duration, which the database holds in milliseconds.
fn duration(values: &Spectrum<str>) -> std::result::Result<Option<Duration>, String> {

    let Some(millis) = number(values)? else {
        return Ok(None);
    };

    Duration::try_from_secs_f64(millis / 1000.0)
        .map(Some)
        .map_err(|_| format!("{millis} is not a duration in milliseconds"))
    
}

/// A property that is the criterion of an event, which Tango allows to be two values, the
/// change downwards and the change upwards, either in two values or in one separated by a
/// comma. Only one change is kept for both, see [`crate::dev::AttrChangeEventConfig`], and
/// the smaller one is: an event is then sent at least as often as either asks for.
fn change(values: &Spectrum<str>) -> std::result::Result<Option<f64>, String> {

    let changes = values.iter()
        .flat_map(|value| value.split(','))
        .map(str::trim)
        .filter(|value| !is_unset(value))
        .collect::<Vec<_>>();

    if changes.len() > 2 {
        return Err(format!("expected at most two values, got {}", changes.len()));
    }

    let mut min = None::<f64>;
    for change in changes {
        let change = parse_number(change)?.abs();
        min = Some(min.map_or(change, |min| min.min(change)));
    }

    Ok(min)
    
}

/// A property that is the labels of an enumerated attribute, one value each.
fn labels(values: &Spectrum<str>) -> Vec<Cow<'static, str>> {
    match single(values) {
        Ok(None) => Vec::new(),
        _ => values.iter().map(|label| Cow::Owned(label.to_string())).collect(),
    }
}

/// What the limits of an attribute of that kind are read as: its limits are values of it,
/// so they are of its own type.
fn limit_kind(kind: Option<AttrDataKind>) -> LimitKind {
    match kind {
        Some(AttrDataKind::Short | AttrDataKind::Long | AttrDataKind::Long64 | AttrDataKind::Enum) => LimitKind::Long,
        Some(AttrDataKind::Octet | AttrDataKind::UShort | AttrDataKind::ULong | AttrDataKind::ULong64) => LimitKind::ULong,
        // The floating kinds, and the ones that have no limits to speak of.
        _ => LimitKind::Double,
    }
}

/// The first property of that configuration that an attribute of that kind does not
/// support, see [`ConfigProp::supported_by`].
pub fn unsupported_prop(config: &AttrConfig, kind: Option<AttrDataKind>) -> Option<ConfigProp> {
    ConfigProp::ALL.into_iter().find(|&prop| !prop.supported_by(kind) && !prop_value(config, prop).is_unset())
}

/// Why a property is refused by an attribute of that kind.
pub fn unsupported(kind: Option<AttrDataKind>) -> String {
    match kind {
        Some(kind) => format!("not supported by an attribute of type {kind:?}"),
        None => "not supported by an attribute of no type".to_string(),
    }
}

/// The three kinds of number the limits of an attribute may be read as, see [`limit_kind`].
#[derive(Debug, Clone, Copy)]
enum LimitKind {
    Double,
    Long,
    ULong,
}

// =========================== //
//  Changing the configuration //
// =========================== //

/// What changing the configuration of an attribute on a device does to what the database
/// holds for it on that device, see [`Attr::change_config`].
#[derive(Debug, Default, PartialEq)]
pub struct ConfigChanges {
    /// The properties to store, with their values.
    pub put: Vec<(ConfigProp, Vec<String>)>,
    /// The properties to delete, the device then inheriting them.
    pub del: Vec<ConfigProp>,
}

impl ConfigChanges {
    pub fn is_empty(&self) -> bool {
        self.put.is_empty() && self.del.is_empty()
    }
}

/// Set that property of a configuration to the one of another.
/// 
/// The two halves of the delta alarm only make an alarm together, so a delta time given to
/// a configuration that has no delta value is lost, as it is when it is loaded, see
/// [`ConfigLoader::finish`].
fn copy_prop(dst: &mut AttrConfig, src: &AttrConfig, prop: ConfigProp) {
    match prop {
        ConfigProp::Description => dst.doc = src.doc.clone(),
        ConfigProp::Label => dst.label = src.label.clone(),
        ConfigProp::Unit => dst.unit = src.unit.clone(),
        ConfigProp::StandardUnit => dst.standard_unit = src.standard_unit,
        ConfigProp::DisplayUnit => dst.display_unit = src.display_unit.clone(),
        ConfigProp::Format => dst.display_format = src.display_format.clone(),
        ConfigProp::MinValue => dst.range.min = src.range.min,
        ConfigProp::MaxValue => dst.range.max = src.range.max,
        ConfigProp::MinAlarm => dst.alarm.min = src.alarm.min,
        ConfigProp::MaxAlarm => dst.alarm.max = src.alarm.max,
        ConfigProp::MinWarning => dst.warning.min = src.warning.min,
        ConfigProp::MaxWarning => dst.warning.max = src.warning.max,
        ConfigProp::DeltaVal => {
            let time = dst.delta.and_then(|delta| delta.time);
            dst.delta = src.delta.map(|delta| AttrDeltaConfig { value: delta.value, time });
        }
        ConfigProp::DeltaT => {
            if let Some(delta) = &mut dst.delta {
                delta.time = src.delta.and_then(|delta| delta.time);
            }
        }
        ConfigProp::RelChange => dst.change_event.rel_change = src.change_event.rel_change,
        ConfigProp::AbsChange => dst.change_event.abs_change = src.change_event.abs_change,
        ConfigProp::EventPeriod => dst.periodic_event.period = src.periodic_event.period,
        ConfigProp::ArchiveRelChange => dst.archive_event.rel_change = src.archive_event.rel_change,
        ConfigProp::ArchiveAbsChange => dst.archive_event.abs_change = src.archive_event.abs_change,
        ConfigProp::ArchivePeriod => dst.archive_event.period = src.archive_event.period,
        ConfigProp::EnumLabels => dst.enum_labels = src.enum_labels.clone(),
    }
}

/// What makes that configuration incoherent, if anything: a range whose minimum is not
/// below its maximum, which no value could be in, the way cppTango refuses it.
fn incoherence(config: &AttrConfig) -> Option<String> {
    for (what, range) in [
        ("value", &config.range), 
        ("alarm", &config.alarm), 
        ("warning", &config.warning)
    ] {
        if let (Some(min), Some(max)) = (range.min, range.max) {
            if !(min < max) {
                return Some(format!("the minimum of its {what} range ({min}) is not below its maximum ({max})"));
            }
        }
    }
    None
}

// =========================== //
//      Memorized values       //
// =========================== //

/// The attribute property the memorized value of an attribute is stored under, by the
/// device, see [`Attr::store`].
const MEM_VALUE: &str = "__value";
/// What cppTango stores as the memorized value of an attribute that was never written.
const MEM_NOT_USED: &str = "Not used yet";

/// The string a memorized value is stored as, which is the one cppTango stores, so that a
/// device keeps its set point across servers written in either: a boolean is `true` or
/// `false`, an enumerated value its index, and any other number written out.
/// 
/// Only a scalar can be memorized, see [`super::def::AttrDef::memorized`].
fn mem_value_str(value: &Value) -> std::result::Result<String, String> {
    fn scalar<T: Element + ?Sized>(format: &ValueFormat<T>) -> std::result::Result<T::Ref<'_>, String> {
        format.scalar().map(|scalar| scalar.value()).ok_or_else(|| "only a scalar can be memorized".to_string())
    }
    Ok(match value {
        Value::Bool(format) => scalar(format)?.to_string(),
        Value::Octet(format) => scalar(format)?.to_string(),
        Value::UShort(format) => scalar(format)?.to_string(),
        Value::Short(format) => scalar(format)?.to_string(),
        Value::ULong(format) => scalar(format)?.to_string(),
        Value::Long(format) => scalar(format)?.to_string(),
        Value::ULong64(format) => scalar(format)?.to_string(),
        Value::Long64(format) => scalar(format)?.to_string(),
        Value::Float(format) => scalar(format)?.to_string(),
        Value::Double(format) => scalar(format)?.to_string(),
        Value::Enum(format) => scalar(format)?.0.to_string(),
        Value::String(format) => scalar(format)?.to_string(),
        _ => return Err("a value of that kind cannot be memorized".to_string()),
    })
}

/// The memorized value stored for an attribute of that kind, parsed back, absent for an
/// attribute that was never written, see [`mem_value_str`].
fn parse_mem_value(kind: Option<&AttrDataKind>, values: &Spectrum<str>) -> std::result::Result<Option<Value>, String> {

    let mut iter = values.iter();
    let value = match (iter.next(), iter.next()) {
        (None, _) => return Ok(None),
        (Some(value), None) => value,
        (Some(_), Some(_)) => return Err(format!("expected a single value, got {}", values.len())),
    };

    if value == MEM_NOT_USED {
        return Ok(None);
    }

    // Read the way cppTango reads it, as a stream would: blanks around a number are not
    // part of it, but they are of a string.
    fn parse<T: std::str::FromStr>(value: &str) -> std::result::Result<T, String> {
        value.trim().parse::<T>().map_err(|_| format!("{value:?} is not a value of the attribute"))
    }

    Ok(Some(match kind {
        Some(AttrDataKind::Bool) => match value.trim() {
            value if value.eq_ignore_ascii_case("true") || value == "1" => Value::from(true),
            value if value.eq_ignore_ascii_case("false") || value == "0" => Value::from(false),
            _ => return Err(format!("{value:?} is not a boolean")),
        },
        Some(AttrDataKind::Octet) => Value::from(parse::<u8>(value)?),
        Some(AttrDataKind::UShort) => Value::from(parse::<u16>(value)?),
        Some(AttrDataKind::Short) => Value::from(parse::<i16>(value)?),
        Some(AttrDataKind::ULong) => Value::from(parse::<u32>(value)?),
        Some(AttrDataKind::Long) => Value::from(parse::<i32>(value)?),
        Some(AttrDataKind::ULong64) => Value::from(parse::<u64>(value)?),
        Some(AttrDataKind::Long64) => Value::from(parse::<i64>(value)?),
        Some(AttrDataKind::Float) => Value::from(parse::<f32>(value)?),
        Some(AttrDataKind::Double) => Value::from(parse::<f64>(value)?),
        Some(AttrDataKind::Enum) => Value::from(DevEnum(parse::<i16>(value)?)),
        Some(AttrDataKind::String) => Value::from(value),
        _ => return Err("a value of that kind cannot be memorized".to_string()),
    }))

}

#[cfg(test)]
mod tests {

    use crate::dev::{AttrRangeConfig, AttrChangeEventConfig};

    use super::*;

    /// An attribute whose definition gives it a label, whose class is given a unit by the
    /// database, and which has a unit and a lower bound of its own on its device.
    fn current() -> AttrConfig {
        AttrConfig {
            label: Some("Position".into()),
            unit: Some("cm".into()),
            range: AttrRangeConfig { min: Some(AttrNumber::Long(-5)), max: None },
            ..AttrConfig::default()
        }
    }

    /// The changes of that attribute to the configuration the given function makes of the
    /// one it has, along with the configuration it ends up with.
    fn changes(change: impl FnOnce(&mut AttrConfig)) -> (ConfigChanges, AttrConfig) {
        let attr = Attr::new(Arc::new(AttrDef::<()>::new("Position").kind(AttrDataKind::Long).label("Position")));
        attr.setup.lock().unwrap().config = current();
        let class = [Named::new("unit".into(), Spectrum::from_strs(["mm"]).unwrap())];
        let mut requested = current();
        change(&mut requested);
        let changes = attr.change_config(&class, &requested).unwrap();
        (changes, attr.config())
    }

    fn put(pairs: &[(ConfigProp, &str)]) -> ConfigChanges {
        ConfigChanges {
            put: pairs.iter().map(|&(prop, value)| (prop, vec![value.to_string()])).collect(),
            del: Vec::new(),
        }
    }

    fn del(props: &[ConfigProp]) -> ConfigChanges {
        ConfigChanges { put: Vec::new(), del: props.to_vec() }
    }

    /// Numbers against a range whose bounds are of another variant, the widest integers
    /// compared exactly, and a not-a-number outside of any range.
    #[test]
    fn range_bounds() {
        let range = AttrRangeConfig { min: Some(AttrNumber::Long(-1)), max: Some(AttrNumber::Double(2.5)) };
        assert!(!outside(&range, AttrNumber::ULong(2)));
        assert!(!outside(&range, AttrNumber::Long(-1)));
        assert!(outside(&range, AttrNumber::ULong(3)));
        assert!(outside(&range, AttrNumber::Double(f64::NAN)));
        let range = AttrRangeConfig { min: None, max: Some(AttrNumber::ULong(u64::MAX - 1)) };
        assert!(outside(&range, AttrNumber::ULong(u64::MAX)));
        assert!(!outside(&range, AttrNumber::Long(i64::MIN)));
        assert!(!any_number(&Value::from("text"), |_| true));
    }

    /// A range whose minimum is not below its maximum, an empty one included, and a range
    /// open on either side.
    #[test]
    fn range_incoherence() {
        let range = |min: i64, max: i64| AttrRangeConfig { min: Some(AttrNumber::Long(min)), max: Some(AttrNumber::Long(max)) };
        assert_eq!(incoherence(&AttrConfig { range: range(-1, 1), ..AttrConfig::default() }), None);
        assert!(incoherence(&AttrConfig { warning: range(1, 1), ..AttrConfig::default() }).unwrap().contains("warning"));
        assert!(incoherence(&AttrConfig { alarm: range(2, 1), ..AttrConfig::default() }).unwrap().contains("alarm"));
        let open = AttrRangeConfig { min: Some(AttrNumber::Long(1)), max: None };
        assert_eq!(incoherence(&AttrConfig { range: open, ..AttrConfig::default() }), None);
    }

    /// A value: stored, unless it is what the device has already, or what it inherits.
    #[test]
    fn value_changes() {
        assert_eq!(changes(|_| ()).0, ConfigChanges::default());
        assert_eq!(changes(|config| config.label = Some("Pos".into())).0, put(&[(ConfigProp::Label, "Pos")]));
        assert_eq!(changes(|config| config.range.max = Some(AttrNumber::Long(5))).0, put(&[(ConfigProp::MaxValue, "5")]));
        assert_eq!(changes(|config| config.unit = Some("mm".into())).0, del(&[ConfigProp::Unit]));
    }

    /// No value: what the device inherits, whatever it is, and nothing to do for a field
    /// the device has nothing of its own for.
    #[test]
    fn reset_changes() {
        let (unit, config) = changes(|config| config.unit = None);
        assert_eq!((unit, config.unit.as_deref()), (del(&[ConfigProp::Unit]), Some("mm")));
        let (min, config) = changes(|config| config.range.min = None);
        assert_eq!((min, config.range.min), (del(&[ConfigProp::MinValue]), None));
        let (label, config) = changes(|config| config.label = None);
        assert_eq!((label, config.label.as_deref()), (ConfigChanges::default(), Some("Position")));
    }

    /// The bounds of a string, refused unless unset, and the alarms of an enumerated
    /// attribute, refused when its range is not.
    #[test]
    fn unsupported_props() {
        let load = |kind, name: &str, value: &str| {
            let props = [Named::new(name.into(), Spectrum::from_strs([value]).unwrap())];
            let mut loader = ConfigLoader::new(&AttrConfig::default(), Some(kind));
            loader.apply_level("device", Ok(&props));
            loader.finish().1
        };
        assert!(load(AttrDataKind::String, "max_alarm", "5").unwrap().contains("not supported by an attribute of type String"));
        assert_eq!(load(AttrDataKind::String, "max_alarm", "Not specified"), None);
        assert_eq!(load(AttrDataKind::String, "label", "Name"), None);
        assert!(load(AttrDataKind::Enum, "max_alarm", "2").is_some());
        assert_eq!(load(AttrDataKind::Enum, "max_value", "2"), None);
    }

    /// Every field of a configuration stored and loaded back the same.
    #[test]
    fn prop_round_trip() {

        let config = AttrConfig {
            doc: Some("First line\nSecond line".into()),
            standard_unit: Some(0.001),
            range: AttrRangeConfig { min: Some(AttrNumber::Long(-5)), max: Some(AttrNumber::Long(5)) },
            delta: Some(AttrDeltaConfig { value: AttrNumber::Long(1), time: Some(Duration::from_millis(250)) }),
            change_event: AttrChangeEventConfig { rel_change: Some(0.5), abs_change: None },
            enum_labels: vec!["Off".into(), "On".into()],
            ..AttrConfig::default()
        };

        let attr = Attr::new(Arc::new(AttrDef::<()>::new("Position").kind(AttrDataKind::Long)));
        let changes = attr.change_config(&[], &config).unwrap();
        assert_eq!(attr.config(), config);
        let props = changes.put.into_iter()
            .map(|(prop, values)| Named::new(prop.name().into(), Spectrum::from_strs(values).unwrap()))
            .collect::<Vec<_>>();

        let mut loader = ConfigLoader::new(&AttrConfig::default(), Some(AttrDataKind::Long));
        loader.apply_level("device", Ok(&props));
        assert_eq!(loader.finish(), (config, None));

    }

}