rs-rich-interact 0.0.12

//! The terminal session: raw mode, the alternate screen, mouse and paste
//! modes, the kitty keyboard protocol, synchronized output, and their
//! restoration on every way out (#489).
//!
//! Everything a [`Session`] turns on is recorded in a process-wide flag
//! set, and undone by whichever comes first: [`Session::leave`], dropping
//! the session (an early return, `?`), or a panic, through a hook installed
//! on first use that restores the terminal before the panic message prints
//! (a panic caught by [`catch_panic`], which the session survives, leaves
//! it alone).
//! Ctrl+C arrives as a key in raw mode, so it ends the event loop the
//! ordinary way. On Unix, SIGTERM, SIGHUP and SIGQUIT restore the terminal
//! too, from a thread that then takes the signal's default action. Ctrl+Z
//! (a key in raw mode) and SIGTSTP suspend: the terminal is given back, the
//! process stops as the shell expects, and on `fg` the modes come back and
//! the view repaints. [`Session::handoff`] gives the terminal to another program
//! (`$EDITOR`, a pager) and takes it back.
//!
//! A session drives the terminal with one library, its
//! [`BackendKind`]: crossterm by default, or termion (#677) or termwiz
//! (#678) behind their features. The library reads keys, the mouse and
//! resizes, measures the terminal, and turns raw mode and the alternate
//! screen on and off; what is turned on, and how it is given back on every
//! way out above, is the same whichever it is.
//!
//! Where the terminal has synchronized output (DEC private mode 2026), each
//! frame is written as one synchronized update: between `CSI ? 2026 h` and
//! `CSI ? 2026 l`, so the terminal shows it whole, without tearing, and a
//! screen reader that follows the cursor does not see it jump across each
//! changed region. The terminal is asked in the start-up query that asks
//! for the kitty keyboard protocol, so detecting it costs no extra wait;
//! `RICH_SYNC_OUTPUT` and [`SessionOptions::synchronized_output`] override
//! what it answers.
//!
//! The terminal's modes are process-wide, so only one session exists at a
//! time: starting a second while the first is alive (a component that
//! calls [`run`](crate::run) from inside another) fails with
//! [`io::ErrorKind::ResourceBusy`] and changes nothing.

#[cfg(target_arch = "wasm32")]
use crate::crossterm_stub as crossterm;
use std::cell::Cell;
use std::fmt;
use std::io::{self, Write};
use std::panic::UnwindSafe;
use std::process::Command;
use std::sync::Once;
use std::sync::atomic::{AtomicBool, AtomicU8, Ordering};
use std::time::{Duration, Instant};

#[cfg(target_arch = "wasm32")]
use crate::crossterm_stub::{from_crossterm, from_crossterm_kitty};
use crate::event::Event;
#[cfg(not(target_arch = "wasm32"))]
use crate::event::{from_crossterm, from_crossterm_kitty};

#[cfg(all(unix, feature = "termion"))]
mod with_termion;
#[cfg(feature = "termwiz")]
mod with_termwiz;

const RAW: u8 = 1;
const ALTERNATE: u8 = 2;
const MOUSE: u8 = 4;
const PASTE: u8 = 8;
const KITTY: u8 = 16;
/// Frames are written as synchronized updates: the restore ends one a write
/// cut short left open.
const SYNC: u8 = 32;
/// The mouse is reported in pixels (SGR-Pixels, mode 1016; #819).
const PIXELS: u8 = 64;

/// The kitty keyboard protocol's flags a session pushes: disambiguate the
/// keys a legacy terminal sends alike (1) and report releases and repeats
/// (2). Not every key as an escape code (8): typed text would then arrive
/// as a base key and modifiers rather than the character the layout makes,
/// so plain text keys, Enter, Tab and Backspace report no release. The
/// terminal keeps a stack of flags for each screen, so they are pushed
/// after entering the alternate screen and popped before leaving it.
/// termwiz reads the first flag's keys but not the second's releases, so
/// a termwiz session pushes the first only.
const PUSH_KITTY: &str = "\x1b[>3u";
/// The flags [`SessionOptions::all_keys`] pushes: those two, every key as
/// an escape code (8), so text keys report releases and modifier keys
/// report themselves, and the alternate keys (4), so a shifted key still
/// arrives as the character the layout makes (`!`, not Shift and `1`).
const PUSH_KITTY_ALL: &str = "\x1b[>15u";
#[cfg(feature = "termwiz")]
const PUSH_KITTY_KEYS: &str = "\x1b[>1u";
const POP_KITTY: &str = "\x1b[<1u";

/// What the terminal answered the start-up query ([`Answers::encode`]): 0
/// not asked yet. Asked once a process, since asking can wait for a
/// terminal that does not answer.
static ANSWERS: AtomicU8 = AtomicU8::new(0);

/// Begins a synchronized update (DEC private mode 2026): the terminal holds
/// the screen until [`END_SYNCHRONIZED_UPDATE`].
pub const BEGIN_SYNCHRONIZED_UPDATE: &str = "\x1b[?2026h";
/// Ends a synchronized update: the terminal shows what was written since
/// [`BEGIN_SYNCHRONIZED_UPDATE`] in one go.
pub const END_SYNCHRONIZED_UPDATE: &str = "\x1b[?2026l";
/// Asks whether the terminal knows mode 2026 (DECRQM). Sent first, before
/// the kitty query and the device attributes: a reply arriving after the
/// session stopped waiting then runs into theirs, which crossterm's parser
/// reads as one answer of its own, never as keys.
#[cfg(unix)]
const ASK_SYNC: &str = "\x1b[?2026$p";
/// The environment variable that turns synchronized output off (`0`) or on
/// (`1`) whatever the terminal answers.
pub const SYNC_OUTPUT_ENV: &str = "RICH_SYNC_OUTPUT";
/// Asks whether the terminal knows SGR-Pixels mouse reports (mode 1016,
/// DECRQM), in the start-up query after synchronized output's question.
#[cfg(unix)]
const ASK_PIXELS: &str = "\x1b[?1016$p";
/// The environment variable that turns pixel-precise mouse reports off
/// (`0`) whatever the terminal answers. On by default where the terminal
/// knows mode 1016 and says how big its cells are.
pub const PIXEL_MOUSE_ENV: &str = "RICH_PIXEL_MOUSE";

/// Whether `RICH_PIXEL_MOUSE`'s `value` allows pixel reports: anything but
/// `0` (unset too).
fn pixels_allowed(value: Option<&str>) -> bool {
    value.map(str::trim) != Some("0")
}

/// `frame` as one synchronized update; nothing for an empty frame.
pub fn synchronized_update(frame: &str) -> String {
    if frame.is_empty() {
        return String::new();
    }
    let mut out = String::with_capacity(
        BEGIN_SYNCHRONIZED_UPDATE.len() + frame.len() + END_SYNCHRONIZED_UPDATE.len(),
    );
    out.push_str(BEGIN_SYNCHRONIZED_UPDATE);
    out.push_str(frame);
    out.push_str(END_SYNCHRONIZED_UPDATE);
    out
}

/// What `RICH_SYNC_OUTPUT`'s `value` forces: `0` off, `1` on; anything else,
/// or unset, leaves it to the terminal's answer.
fn sync_override(value: Option<&str>) -> Option<bool> {
    match value.map(str::trim) {
        Some("0") => Some(false),
        Some("1") => Some(true),
        _ => None,
    }
}

/// What the environment forces synchronized output to, if anything.
fn sync_from_env() -> Option<bool> {
    sync_override(std::env::var(SYNC_OUTPUT_ENV).ok().as_deref())
}

/// What is currently turned on, for the panic hook.
static ACTIVE: AtomicU8 = AtomicU8::new(0);
static HOOK: Once = Once::new();
/// Whether a [`Session`] is alive. Held from `start` until drop.
static OWNED: AtomicBool = AtomicBool::new(false);
/// Whether the live session paints to standard error, for the panic hook.
static ON_STDERR: AtomicBool = AtomicBool::new(false);
/// The library the live session drives the terminal with
/// ([`BackendKind::index`]), for the panic hook and the signal thread.
static LIBRARY: AtomicU8 = AtomicU8::new(0);

/// The library a [`Session`] drives the terminal with
/// ([`SessionOptions::backend`]).
///
/// Each reads keys, the mouse and resizes its own way and turns raw mode
/// and the alternate screen on and off itself; the modes a session turns
/// on, and their restoration on every way out, are the same for all of
/// them. termion and termwiz are behind the crate's features of the same
/// names, off by default.
#[derive(Clone, Copy, Debug, Default, PartialEq, Eq, Hash)]
#[non_exhaustive]
pub enum BackendKind {
    /// crossterm, on every platform: the default. With a terminal that has
    /// the kitty keyboard protocol, every key is
    /// [`exact`](crate::Key::exact) and releases arrive.
    #[default]
    Crossterm,
    /// termion (feature `termion`), on Unix. Keys arrive as a legacy
    /// terminal sends them, whatever the terminal: termion does not read
    /// the kitty keyboard protocol. The mouse comes without modifiers, and
    /// without movement while no button is held.
    #[cfg(all(unix, feature = "termion"))]
    Termion,
    /// termwiz (feature `termwiz`), on Unix and Windows. With a terminal
    /// that has the kitty keyboard protocol every key is exact, but releases
    /// do not arrive: termwiz does not read them. Its probe of the terminal
    /// (terminfo, `COLORTERM`) decides the colours an
    /// [`EventLoop`](crate::EventLoop) paints with.
    #[cfg(feature = "termwiz")]
    Termwiz,
}

impl BackendKind {
    /// Every backend this build has, crossterm first.
    pub const ALL: &'static [BackendKind] = &[
        BackendKind::Crossterm,
        #[cfg(all(unix, feature = "termion"))]
        BackendKind::Termion,
        #[cfg(feature = "termwiz")]
        BackendKind::Termwiz,
    ];

    /// The library's name: `crossterm`, `termion` or `termwiz`.
    pub fn name(self) -> &'static str {
        match self {
            BackendKind::Crossterm => "crossterm",
            #[cfg(all(unix, feature = "termion"))]
            BackendKind::Termion => "termion",
            #[cfg(feature = "termwiz")]
            BackendKind::Termwiz => "termwiz",
        }
    }

    /// The backend named `name` (any case), if this build has it.
    pub fn from_name(name: &str) -> Option<BackendKind> {
        BackendKind::ALL
            .iter()
            .copied()
            .find(|kind| kind.name().eq_ignore_ascii_case(name))
    }

    fn index(self) -> u8 {
        match self {
            BackendKind::Crossterm => 0,
            #[cfg(all(unix, feature = "termion"))]
            BackendKind::Termion => 1,
            #[cfg(feature = "termwiz")]
            BackendKind::Termwiz => 2,
        }
    }

    /// The library the live session uses.
    fn live() -> BackendKind {
        let index = LIBRARY.load(Ordering::SeqCst);
        BackendKind::ALL
            .iter()
            .copied()
            .find(|kind| kind.index() == index)
            .unwrap_or_default()
    }

    /// Turn raw mode on or off. `wait`: wait for the library's lock (off
    /// in the panic hook, whose thread may hold it).
    fn raw_mode(self, on: bool, wait: bool) -> io::Result<()> {
        let _ = wait;
        match self {
            BackendKind::Crossterm if on => crossterm::terminal::enable_raw_mode(),
            BackendKind::Crossterm => crossterm::terminal::disable_raw_mode(),
            #[cfg(all(unix, feature = "termion"))]
            BackendKind::Termion => with_termion::raw_mode(on, wait),
            #[cfg(feature = "termwiz")]
            BackendKind::Termwiz => with_termwiz::raw_mode(on, wait),
        }
    }

    /// Whether the library enters and leaves the alternate screen with a
    /// call of its own, keeping track of it (termwiz), rather than having
    /// the session write it with the other modes.
    fn owns_alternate_screen(self) -> bool {
        #[cfg(feature = "termwiz")]
        if self == BackendKind::Termwiz {
            return true;
        }
        false
    }

    /// Enter or leave the alternate screen through a library that
    /// [owns it](Self::owns_alternate_screen); `None` for one that has the
    /// session write it, as [`alternate_sequence`](Self::alternate_sequence)
    /// says.
    fn alternate_screen(self, on: bool, wait: bool) -> Option<io::Result<()>> {
        let _ = (on, wait);
        match self {
            #[cfg(feature = "termwiz")]
            BackendKind::Termwiz => Some(with_termwiz::alternate_screen(on, wait)),
            _ => None,
        }
    }

    /// The sequence that enters (`on`) or leaves the alternate screen, for
    /// a library without a call of its own: termion's
    /// `ToAlternateScreen` and `ToMainScreen`, and crossterm's same bytes.
    fn alternate_sequence(self, on: bool) -> String {
        match self {
            #[cfg(all(unix, feature = "termion"))]
            BackendKind::Termion if on => termion::screen::ToAlternateScreen.to_string(),
            #[cfg(all(unix, feature = "termion"))]
            BackendKind::Termion => termion::screen::ToMainScreen.to_string(),
            _ if on => "\x1b[?1049h".into(),
            _ => "\x1b[?1049l".into(),
        }
    }

    /// The kitty keyboard flags this library reads keys with.
    fn kitty_push(self) -> &'static str {
        match self {
            #[cfg(feature = "termwiz")]
            BackendKind::Termwiz => PUSH_KITTY_KEYS,
            _ => PUSH_KITTY,
        }
    }

    /// What to write once the library's raw mode is off, for what turning
    /// it off leaves on: termwiz's raw mode sets xterm's modifyOtherKeys to
    /// level 2 and its cooked mode to 1, and only dropping its terminal
    /// sets it back to 0, as a shell or a program handed the terminal
    /// expects.
    fn after_raw_mode(self) -> &'static str {
        match self {
            #[cfg(all(unix, feature = "termwiz"))]
            BackendKind::Termwiz => "\x1b[>4;0m",
            _ => "",
        }
    }

    /// Give back what the library holds once the session is over.
    fn release(self) {
        match self {
            #[cfg(all(unix, feature = "termion"))]
            BackendKind::Termion => with_termion::release(),
            #[cfg(feature = "termwiz")]
            BackendKind::Termwiz => with_termwiz::release(),
            _ => {}
        }
    }
}

impl fmt::Display for BackendKind {
    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
        f.write_str(self.name())
    }
}

/// Where a session paints.
#[derive(Clone, Copy, Debug, Default, PartialEq, Eq)]
pub enum Output {
    /// Standard output.
    #[default]
    Stdout,
    /// Standard error, which leaves standard output to the answer a script
    /// captures: `choice=$(rich choose a b c)`. Keys still come from the
    /// terminal, which crossterm opens itself when standard input is a pipe.
    Stderr,
}

impl Output {
    /// Whether the stream is a terminal.
    pub fn is_terminal(self) -> bool {
        use std::io::IsTerminal;
        match self {
            Output::Stdout => io::stdout().is_terminal(),
            Output::Stderr => io::stderr().is_terminal(),
        }
    }

    fn write(self, text: &str) -> io::Result<()> {
        match self {
            Output::Stdout => {
                let mut out = io::stdout().lock();
                out.write_all(text.as_bytes())?;
                out.flush()
            }
            Output::Stderr => {
                let mut out = io::stderr().lock();
                out.write_all(text.as_bytes())?;
                out.flush()
            }
        }
    }

    /// The live session's stream.
    fn live() -> Output {
        if ON_STDERR.load(Ordering::SeqCst) {
            Output::Stderr
        } else {
            Output::Stdout
        }
    }
}

/// Whether keys can be read from a terminal: standard input, or the
/// process's controlling terminal when standard input is a pipe.
pub(crate) fn keys_available() -> bool {
    use std::io::IsTerminal;
    if io::stdin().is_terminal() {
        return true;
    }
    #[cfg(unix)]
    let terminal = "/dev/tty";
    #[cfg(windows)]
    let terminal = "CONIN$";
    #[cfg(any(unix, windows))]
    return std::fs::OpenOptions::new()
        .read(true)
        .write(true)
        .open(terminal)
        .is_ok();
    #[cfg(not(any(unix, windows)))]
    false
}

/// Undo whatever `ACTIVE` records. Safe to call twice. `wait`: as for
/// [`BackendKind::raw_mode`].
fn restore(wait: bool) -> io::Result<()> {
    let active = ACTIVE.swap(0, Ordering::SeqCst);
    if active == 0 {
        return Ok(());
    }
    let library = BackendKind::live();
    let out = undo(active, library);
    // Every step is tried, so a failed one leaves no other on; the first
    // error is the one returned.
    let written = Output::live().write(&out);
    let left = if active & ALTERNATE != 0 {
        library.alternate_screen(false, wait).unwrap_or(Ok(()))
    } else {
        Ok(())
    };
    let raw = if active & RAW != 0 {
        let off = library.raw_mode(false, wait);
        let after = match library.after_raw_mode() {
            "" => Ok(()),
            after => Output::live().write(after),
        };
        off.and(after)
    } else {
        Ok(())
    };
    written.and(left).and(raw)
}

/// The sequences that turn off what `active` records: all of it, but for
/// the alternate screen of a library that leaves it itself. A synchronized
/// update first, so a frame cut short (a panic, a signal mid-write) is
/// shown and the rest are not held.
fn undo(active: u8, library: BackendKind) -> String {
    let mut out = String::new();
    if active & SYNC != 0 {
        out.push_str(END_SYNCHRONIZED_UPDATE);
    }
    if active & KITTY != 0 {
        out.push_str(POP_KITTY);
    }
    if active & PIXELS != 0 {
        out.push_str("\x1b[?1016l");
    }
    if active & MOUSE != 0 {
        out.push_str("\x1b[?1006l\x1b[?1015l\x1b[?1003l\x1b[?1002l\x1b[?1000l");
    }
    if active & PASTE != 0 {
        out.push_str("\x1b[?2004l");
    }
    out.push_str("\x1b[?25h");
    if active & ALTERNATE != 0 && !library.owns_alternate_screen() {
        out.push_str(&library.alternate_sequence(false));
    }
    out
}

/// Raw mode is on for a line read without echo
/// ([`StdLineIo::read_secret`](crate::policy::StdLineIo)), outside any
/// session: the signal thread turns it off too.
static RAW_LINE: AtomicBool = AtomicBool::new(false);
#[cfg(unix)]
static SIGNALS: Once = Once::new();

/// Record that a line is being read in raw mode (`on`), or no longer is.
pub(crate) fn raw_line(on: bool) {
    if on {
        watch_signals();
    }
    RAW_LINE.store(on, Ordering::SeqCst);
}

/// SIGTERM, SIGHUP and SIGQUIT end the process without unwinding, so
/// neither `Drop` nor the panic hook would give the terminal back. From
/// the first session on, a thread waits for them: it restores whatever is
/// on, then takes the signal's default action (the process ends as it
/// would have). The handlers stay installed once the session ends, since
/// removing them would leave the signals ignored; with nothing on they
/// only take the default action.
fn watch_signals() {
    #[cfg(unix)]
    SIGNALS.call_once(|| {
        use signal_hook::consts::{SIGHUP, SIGQUIT, SIGTERM, SIGTSTP};
        let Ok(mut signals) =
            signal_hook::iterator::Signals::new([SIGTERM, SIGHUP, SIGQUIT, SIGTSTP])
        else {
            return;
        };
        let _ = std::thread::Builder::new()
            .name("rich-interact-signals".into())
            .spawn(move || {
                for signal in signals.forever() {
                    if signal == SIGTSTP {
                        suspend();
                        RESUMED.store(true, Ordering::SeqCst);
                    } else {
                        restore_for_signal();
                        run_teardowns();
                        let _ = signal_hook::low_level::emulate_default_handler(signal);
                    }
                }
            });
    });
}

/// What [`on_terminate`] registered.
type Teardown = Box<dyn Fn() + Send + Sync>;
static TEARDOWNS: std::sync::Mutex<Vec<Teardown>> = std::sync::Mutex::new(Vec::new());

/// Run `teardown` when SIGTERM, SIGHUP or SIGQUIT ends the process, from
/// the first session on: on the signal thread, after the terminal is given
/// back and before the signal's default action ends the process. Those
/// signals end it without unwinding, so a `Drop` that stops a child
/// process or removes temporary files never runs; this is where to do that
/// work. Keep it short: the process ends when it returns. Teardowns run in
/// the order they were registered, once each. Not on Windows, which has
/// none of those signals.
pub fn on_terminate(teardown: impl Fn() + Send + Sync + 'static) {
    TEARDOWNS
        .lock()
        .unwrap_or_else(|e| e.into_inner())
        .push(Box::new(teardown));
}

/// Run and forget every teardown [`on_terminate`] registered.
#[cfg(unix)]
fn run_teardowns() {
    let all = std::mem::take(&mut *TEARDOWNS.lock().unwrap_or_else(|e| e.into_inner()));
    for teardown in all {
        teardown();
    }
}

/// [`restore`] from the signal thread. The sequences go straight to the
/// terminal rather than through the standard stream's lock, which the
/// interrupted thread may hold.
#[cfg(unix)]
fn restore_for_signal() {
    let active = ACTIVE.swap(0, Ordering::SeqCst);
    let library = BackendKind::live();
    if active != 0 {
        write_direct(&undo(active, library));
    }
    if active & ALTERNATE != 0 {
        let _ = library.alternate_screen(false, true);
    }
    if active & RAW != 0 {
        let _ = library.raw_mode(false, true);
        write_direct(library.after_raw_mode());
    }
    if RAW_LINE.swap(false, Ordering::SeqCst) {
        let _ = crossterm::terminal::disable_raw_mode();
    }
}

/// Set when the process came back from a suspend it did not start itself
/// (SIGTSTP from outside): [`Session::read`] then asks for a repaint.
static RESUMED: AtomicBool = AtomicBool::new(false);

/// Give the terminal back, stop the process as a shell's job control
/// expects (Ctrl+Z, `kill -TSTP`), and when it continues (`fg`, SIGCONT)
/// turn back on what was on. SIGSTOP cannot be caught, so it still stops
/// with the modes on.
/// Held for the whole of a suspend, from giving the terminal back until its
/// modes are on again, and by [`Session::leave`]. A resume from an outside
/// SIGTSTP runs on the signal thread while the event loop runs on, so
/// without it a session that ended during the stop (a key queued, a timer
/// due) would have its modes turned back on after it restored them.
/// `enter` holds it while it marks the modes on and writes them.
static SUSPENDING: std::sync::Mutex<()> = std::sync::Mutex::new(());

#[cfg(unix)]
fn suspend() {
    let _suspending = SUSPENDING.lock().unwrap_or_else(|e| e.into_inner());
    let active = ACTIVE.load(Ordering::SeqCst);
    let raw_line = RAW_LINE.load(Ordering::SeqCst);
    let library = BackendKind::live();
    restore_for_signal();
    // Stops here until SIGCONT.
    let _ = signal_hook::low_level::emulate_default_handler(signal_hook::consts::SIGTSTP);
    if active & RAW != 0 {
        let _ = library.raw_mode(true, true);
    }
    if raw_line {
        let _ = crossterm::terminal::enable_raw_mode();
    }
    RAW_LINE.store(raw_line, Ordering::SeqCst);
    let mut out = String::new();
    if active & ALTERNATE != 0 {
        if library.alternate_screen(true, true).is_none() {
            out.push_str(&library.alternate_sequence(true));
        }
        out.push_str("\x1b[H");
    }
    if active & KITTY != 0 {
        out.push_str(library.kitty_push());
    }
    if active & MOUSE != 0 {
        out.push_str("\x1b[?1000h\x1b[?1002h\x1b[?1015h\x1b[?1006h");
    }
    if active & PIXELS != 0 {
        out.push_str("\x1b[?1016h");
    }
    if active & PASTE != 0 {
        out.push_str("\x1b[?2004h");
    }
    if active != 0 {
        out.push_str("\x1b[?25l");
    }
    ACTIVE.fetch_or(active, Ordering::SeqCst);
    write_direct(&out);
}

/// `text` straight to the terminal, else to the session's stream.
#[cfg(unix)]
fn write_direct(text: &str) {
    if text.is_empty() {
        return;
    }
    let direct = std::fs::OpenOptions::new()
        .write(true)
        .open("/dev/tty")
        .and_then(|mut tty| tty.write_all(text.as_bytes()));
    if direct.is_err() {
        let _ = Output::live().write(text);
    }
}

/// A library's lock, for a backend that keeps its terminal where the panic
/// hook and the signal thread reach it. With `wait` off it gives up at once
/// rather than wait for a holder, which may be the panicking thread itself.
#[cfg(any(all(unix, feature = "termion"), feature = "termwiz"))]
fn lock<T>(mutex: &std::sync::Mutex<T>, wait: bool) -> io::Result<std::sync::MutexGuard<'_, T>> {
    use std::sync::TryLockError;
    if wait {
        return Ok(mutex.lock().unwrap_or_else(|e| e.into_inner()));
    }
    match mutex.try_lock() {
        Ok(guard) => Ok(guard),
        Err(TryLockError::Poisoned(e)) => Ok(e.into_inner()),
        Err(TryLockError::WouldBlock) => Err(io::ErrorKind::WouldBlock.into()),
    }
}

/// How long the session waits for the terminal to answer a query: a
/// terminal that answers does so within a few milliseconds, even over a
/// slow link well inside this.
#[cfg(unix)]
const ANSWER_WAIT: Duration = Duration::from_secs(1);

/// How much longer it waits once keys come instead of an answer: someone
/// is typing, and a terminal that has not answered by then likely never
/// will. The keys are kept, not lost.
#[cfg(unix)]
const ANSWER_WAIT_TYPING: Duration = Duration::from_millis(250);

/// What [`ask_terminal`] read: everything, answer or not (keys typed
/// meanwhile among it), and whether `done` said the answer was complete.
#[cfg(unix)]
struct Asked {
    bytes: Vec<u8>,
    answered: bool,
}

/// Ask the terminal `query` through `/dev/tty`, and read until `done` says
/// the answer is complete, for [`ANSWER_WAIT`] at most (a terminal that
/// does not answer), or [`ANSWER_WAIT_TYPING`] after keys come. What it
/// returns holds anything else read meanwhile, such as keys typed, for
/// the reader; `None` only when the terminal cannot be opened or asked.
#[cfg(unix)]
fn ask_terminal(query: &str, done: impl Fn(&[u8]) -> bool) -> Option<Asked> {
    use std::io::Read;
    use std::os::unix::io::AsRawFd;
    let mut tty = std::fs::OpenOptions::new()
        .read(true)
        .write(true)
        .open("/dev/tty")
        .ok()?;
    tty.write_all(query.as_bytes()).ok()?;
    tty.flush().ok()?;
    let mut end = Instant::now() + ANSWER_WAIT;
    let mut typing = false;
    let mut bytes = Vec::new();
    loop {
        if done(&bytes) {
            return Some(Asked {
                bytes,
                answered: true,
            });
        }
        if !typing && !strip_answers(&bytes).is_empty() {
            typing = true;
            end = end.min(Instant::now() + ANSWER_WAIT_TYPING);
        }
        let left = end.saturating_duration_since(Instant::now());
        if left.is_zero() {
            break;
        }
        let mut ready = [filedescriptor::pollfd {
            fd: tty.as_raw_fd(),
            events: filedescriptor::POLLIN,
            revents: 0,
        }];
        match filedescriptor::poll(&mut ready, Some(left)) {
            Ok(0) => break,
            Ok(_) => {}
            Err(filedescriptor::Error::Poll(e)) if e.kind() == io::ErrorKind::Interrupted => {
                continue;
            }
            Err(_) => break,
        }
        let mut buffer = [0u8; 256];
        match tty.read(&mut buffer) {
            Ok(0) | Err(_) => break,
            Ok(read) => bytes.extend_from_slice(&buffer[..read]),
        }
    }
    Some(Asked {
        bytes,
        answered: false,
    })
}

/// `bytes` without the private answers in it (see [`private_answers`]),
/// nor one cut short at its end: what was typed meanwhile.
#[cfg(any(unix, test))]
fn strip_answers(bytes: &[u8]) -> Vec<u8> {
    let mut rest = Vec::new();
    let mut at = 0;
    while at < bytes.len() {
        if !bytes[at..].starts_with(b"\x1b[?") {
            rest.push(bytes[at]);
            at += 1;
            continue;
        }
        let mut end = at + 3;
        while end < bytes.len() && (0x20..=0x3f).contains(&bytes[end]) {
            end += 1;
        }
        match bytes.get(end) {
            // Cut short: it is not keys.
            None => break,
            Some(0x40..=0x7e) => at = end + 1,
            Some(_) => at = end,
        }
    }
    rest
}

/// One complete `ESC [ ? <parameters> <intermediates> <final>` in what the
/// terminal answered: the shape of the device attributes answer (`c`), the
/// kitty flags one (`u`) and DECRQM's (`$ y`).
#[cfg(any(unix, test))]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
struct PrivateAnswer<'a> {
    parameters: &'a [u8],
    intermediates: &'a [u8],
    last: u8,
}

/// Each complete private answer in `bytes`, in order. Anything else (keys
/// typed meanwhile, an answer cut short) is passed over.
#[cfg(any(unix, test))]
fn private_answers(bytes: &[u8]) -> impl Iterator<Item = PrivateAnswer<'_>> + '_ {
    let mut at = 0;
    std::iter::from_fn(move || {
        while at + 3 <= bytes.len() {
            if !bytes[at..].starts_with(b"\x1b[?") {
                at += 1;
                continue;
            }
            let start = at + 3;
            let mut end = start;
            while end < bytes.len() && (0x30..=0x3f).contains(&bytes[end]) {
                end += 1;
            }
            let middle = end;
            while end < bytes.len() && (0x20..=0x2f).contains(&bytes[end]) {
                end += 1;
            }
            match bytes.get(end) {
                None => return None,
                Some(&last @ 0x40..=0x7e) => {
                    at = end + 1;
                    return Some(PrivateAnswer {
                        parameters: &bytes[start..middle],
                        intermediates: &bytes[middle..end],
                        last,
                    });
                }
                // Not an answer: look again from the byte that broke it.
                Some(_) => at = end,
            }
        }
        None
    })
}

/// What the terminal answered the start-up query.
#[derive(Clone, Copy, Debug, Default, PartialEq, Eq)]
struct Answers {
    /// It has the kitty keyboard protocol.
    kitty: bool,
    /// It knows synchronized output (mode 2026).
    sync: bool,
    /// It knows SGR-Pixels mouse reports (mode 1016).
    pixels: bool,
}

impl Answers {
    /// For [`ANSWERS`]: never 0.
    fn encode(self) -> u8 {
        1 | (u8::from(self.kitty) << 1) | (u8::from(self.sync) << 2) | (u8::from(self.pixels) << 3)
    }

    fn decode(bits: u8) -> Answers {
        Answers {
            kitty: bits & 2 != 0,
            sync: bits & 4 != 0,
            pixels: bits & 8 != 0,
        }
    }

    /// The answers in `bytes`, once the device attributes, which every
    /// terminal answers last, have come; `None` before. A DECRQM report of
    /// mode 2026 set, reset or permanently set (1, 2, 3) means the terminal
    /// knows it; not recognised (0) or permanently reset (4), or no report,
    /// means it does not.
    #[cfg(any(unix, test))]
    fn read(bytes: &[u8]) -> Option<Answers> {
        let mut answers = Answers::default();
        for answer in private_answers(bytes) {
            match (answer.last, answer.intermediates) {
                (b'c', b"") => return Some(answers),
                (b'u', b"") => answers.kitty = true,
                (b'y', b"$") => {
                    if let Some(state) = answer.parameters.strip_prefix(b"2026;") {
                        answers.sync = matches!(state, b"1" | b"2" | b"3");
                    }
                    if let Some(state) = answer.parameters.strip_prefix(b"1016;") {
                        answers.pixels = matches!(state, b"1" | b"2" | b"3");
                    }
                }
                _ => {}
            }
        }
        None
    }
}

/// The start-up query, asked directly: synchronized output, the kitty
/// keyboard protocol's flags, then the device attributes, which every
/// terminal answers, so a terminal without the others answers only the
/// last. One round trip for both questions. Also what was typed while the
/// session waited (keys pressed as the program opened), for the reader.
#[cfg(unix)]
fn ask_start() -> (Answers, Vec<u8>) {
    let query = format!("{ASK_SYNC}{ASK_PIXELS}\x1b[?u\x1b[c");
    match ask_terminal(&query, |bytes| Answers::read(bytes).is_some()) {
        Some(asked) => {
            let answers = match asked.answered {
                true => Answers::read(&asked.bytes).unwrap_or_default(),
                false => Answers::default(),
            };
            (answers, strip_answers(&asked.bytes))
        }
        None => (Answers::default(), Vec::new()),
    }
}

/// The first complete cursor position report (`ESC [ <row> ; <column> R`)
/// in `bytes`: its row (0-based), and where it is. Anything else (a key
/// typed meanwhile, a mouse report, an answer cut short) is passed over.
#[cfg(any(all(unix, any(feature = "termion", feature = "termwiz")), test))]
fn cursor_report(bytes: &[u8]) -> Option<(u16, std::ops::Range<usize>)> {
    let digits = |from: usize| {
        from + bytes[from..]
            .iter()
            .take_while(|b| b.is_ascii_digit())
            .count()
    };
    let mut at = 0;
    while let Some(found) = bytes[at..].windows(2).position(|w| w == b"\x1b[") {
        let start = at + found;
        let row_end = digits(start + 2);
        if row_end > start + 2 && bytes.get(row_end) == Some(&b';') {
            let end = digits(row_end + 1);
            if end > row_end + 1 && bytes.get(end) == Some(&b'R') {
                let row = std::str::from_utf8(&bytes[start + 2..row_end]).map(str::parse::<u16>);
                if let Ok(Ok(row)) = row {
                    return Some((row.saturating_sub(1), start..end + 1));
                }
            }
        }
        at = start + 1;
    }
    None
}

/// The cursor's row (0-based), asked directly (`CSI 6 n`), and the rest of
/// what was read with the answer (keys typed meanwhile), for the reader.
#[cfg(all(unix, any(feature = "termion", feature = "termwiz")))]
fn ask_cursor_row() -> (Option<u16>, Vec<u8>) {
    let Some(Asked { bytes, .. }) = ask_terminal("\x1b[6n", |bytes| cursor_report(bytes).is_some())
    else {
        return (None, Vec::new());
    };
    match cursor_report(&bytes) {
        Some((row, at)) => {
            let mut rest = bytes[..at.start].to_vec();
            rest.extend_from_slice(&bytes[at.end..]);
            (Some(row), rest)
        }
        None => (None, bytes),
    }
}

/// The terminal's cell size in pixels (width, height), from the window
/// size's pixel fields (`TIOCGWINSZ`); `None` where the terminal leaves
/// them 0 or there is none, and then the mouse stays in cells.
fn cell_size() -> Option<(u16, u16)> {
    let size = crossterm::terminal::window_size().ok()?;
    cell_of(size.columns, size.rows, size.width, size.height)
}

/// One cell's size for a window of `columns` by `rows` cells and `width`
/// by `height` pixels; `None` when any is 0.
fn cell_of(columns: u16, rows: u16, width: u16, height: u16) -> Option<(u16, u16)> {
    if columns == 0 || rows == 0 || width < columns || height < rows {
        return None;
    }
    Some((width / columns, height / rows))
}

thread_local! {
    /// How many [`catch_panic`] calls are running on this thread.
    static CATCHING: Cell<usize> = const { Cell::new(0) };
}

/// [`std::panic::catch_unwind`] for code that runs inside a live session
/// and carries on after a panic (a plugin component's
/// [`PluginView`](crate::plugin::PluginView)): the session's panic hook
/// neither gives the terminal back nor prints the panic message over the
/// view for a panic caught here, since the session goes on. A panic nothing
/// catches still restores the terminal before its message prints.
pub fn catch_panic<R>(f: impl FnOnce() -> R + UnwindSafe) -> std::thread::Result<R> {
    CATCHING.with(|depth| depth.set(depth.get() + 1));
    let result = std::panic::catch_unwind(f);
    CATCHING.with(|depth| depth.set(depth.get() - 1));
    result
}

fn install_hook() {
    HOOK.call_once(|| {
        let previous = std::panic::take_hook();
        std::panic::set_hook(Box::new(move |info| {
            // Caught on this thread while a session is live: the session
            // runs on, and the catcher reports the panic itself.
            if CATCHING.with(Cell::get) > 0 && ACTIVE.load(Ordering::SeqCst) != 0 {
                return;
            }
            let _ = restore(false);
            previous(info);
        }));
    });
}

/// What a session turns on.
#[derive(Clone, Copy, Debug, Default, PartialEq, Eq)]
pub struct SessionOptions {
    /// Take over the whole screen, and give it back as it was on exit.
    /// Without it, components paint inline, below the cursor.
    pub alternate_screen: bool,
    /// Report mouse clicks and the wheel.
    pub mouse: bool,
    /// Deliver pasted text as one [`Event::Paste`].
    pub bracketed_paste: bool,
    /// Where to paint.
    pub output: Output,
    /// Read keys as a legacy terminal sends them, even from a terminal with
    /// the kitty keyboard protocol. Without it, a terminal that answers the
    /// protocol's query has it turned on: Ctrl+I and Tab are told apart
    /// (see [`Key::matches`](crate::Key::matches)), and key releases arrive
    /// as [`Event::KeyUp`] (with crossterm; see [`BackendKind`]).
    pub legacy_keys: bool,
    /// The library that drives the terminal: crossterm unless this says
    /// otherwise.
    pub backend: BackendKind,
    /// Write each frame as one synchronized update (DEC private mode 2026):
    /// `Some(true)` always, `Some(false)` never. `None`, the default, leaves
    /// it to `RICH_SYNC_OUTPUT` (`0` off, `1` on) and then to the terminal,
    /// which is asked in the kitty keyboard protocol's start-up query. A
    /// session that asks nothing ([`legacy_keys`](Self::legacy_keys), the
    /// termion backend, standard output not a terminal) leaves it off
    /// unless this or the environment turns it on.
    pub synchronized_output: Option<bool>,
    /// With the kitty keyboard protocol, have every key reported as an
    /// escape code: releases then arrive for text keys too (letters,
    /// Space, Enter), and modifier keys pressed on their own arrive as
    /// [`KeyCode::Modifier`](crate::KeyCode::Modifier), as a game wants
    /// them. Off by default: typed text then arrives as a base key and the
    /// modifiers held, which loses characters an input method composes.
    /// crossterm only (termwiz reads no releases); see
    /// [`Session::releases_reported`].
    pub all_keys: bool,
}

/// Ends a [`Backend::read`] under way early, from any thread: a value made
/// on another thread is then picked up at once, rather than when the read's
/// timeout runs out. Clones wake the same reads. A wake that comes while
/// no read is under way ends the next one at once, so none is lost; a
/// read woken returns `None`, as if its timeout had passed.
///
/// [`Session`] waits on it with the terminal (a self-pipe beside the
/// terminal in one `poll`, on Unix; elsewhere it looks between short
/// waits). Any other backend, or a loop of one's own, can wait on it with
/// [`wait`](Waker::wait).
///
/// ```
/// use rich_interact::Waker;
/// use std::time::Duration;
///
/// let waker = Waker::new();
/// let other = waker.clone();
/// std::thread::spawn(move || other.wake());
/// assert!(waker.wait(Duration::from_secs(5)));
/// // Taken: the next wait waits.
/// assert!(!waker.wait(Duration::from_millis(1)));
/// ```
#[derive(Clone)]
pub struct Waker(std::sync::Arc<WakeState>);

struct WakeState {
    woken: std::sync::Mutex<bool>,
    changed: std::sync::Condvar,
    /// A byte is written to the second end on a wake, so a `poll` on the
    /// first sees it.
    #[cfg(unix)]
    pipe: Option<(
        std::os::unix::net::UnixStream,
        std::os::unix::net::UnixStream,
    )>,
}

impl Default for Waker {
    fn default() -> Waker {
        Waker::new()
    }
}

impl fmt::Debug for Waker {
    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
        f.debug_struct("Waker")
            .field("woken", &*self.lock())
            .finish()
    }
}

impl Waker {
    pub fn new() -> Waker {
        #[cfg(unix)]
        let pipe = std::os::unix::net::UnixStream::pair()
            .ok()
            .filter(|(a, b)| a.set_nonblocking(true).is_ok() && b.set_nonblocking(true).is_ok());
        Waker(std::sync::Arc::new(WakeState {
            woken: std::sync::Mutex::new(false),
            changed: std::sync::Condvar::new(),
            #[cfg(unix)]
            pipe,
        }))
    }

    fn lock(&self) -> std::sync::MutexGuard<'_, bool> {
        self.0.woken.lock().unwrap_or_else(|e| e.into_inner())
    }

    /// End the read under way, or the next one.
    pub fn wake(&self) {
        let mut woken = self.lock();
        if std::mem::replace(&mut *woken, true) {
            // Woken already: the byte is there.
            return;
        }
        #[cfg(unix)]
        if let Some((_, writer)) = &self.0.pipe {
            use std::io::Write as _;
            let _ = (&*writer).write(&[1]);
        }
        self.0.changed.notify_all();
    }

    /// Whether it was woken since the last call (or [`wait`](Self::wait));
    /// it is not woken after.
    pub fn take(&self) -> bool {
        let mut woken = self.lock();
        #[cfg(unix)]
        if let Some((reader, _)) = &self.0.pipe {
            use std::io::Read as _;
            let mut drained = [0u8; 16];
            while matches!((&*reader).read(&mut drained), Ok(n) if n > 0) {}
        }
        std::mem::replace(&mut *woken, false)
    }

    /// Wait until woken, `timeout` at most; whether it was (and it is not
    /// woken after).
    pub fn wait(&self, timeout: Duration) -> bool {
        {
            let woken = self.lock();
            let _ = self
                .0
                .changed
                .wait_timeout_while(woken, timeout, |woken| !*woken)
                .unwrap_or_else(|e| e.into_inner());
        }
        self.take()
    }

    /// What a `poll` waits on to see a wake: readable once woken, until
    /// [`take`](Self::take).
    #[cfg(unix)]
    pub(crate) fn fd(&self) -> Option<std::os::unix::io::RawFd> {
        use std::os::unix::io::AsRawFd;
        self.0.pipe.as_ref().map(|(reader, _)| reader.as_raw_fd())
    }
}

/// How long a read waits between looks at its [`Waker`] where it cannot
/// wait on it with the terminal.
const WAKE_SLICE: Duration = Duration::from_millis(4);

/// The longest a read woken over and over goes without looking at the
/// terminal: a look on every wake costs a wake rate on some terminals
/// (macOS's), none starves the keys.
const KEYS_SLICE: Duration = Duration::from_millis(20);

/// What a read waits on to see a [`Waker`]'s wake: its pipe on Unix.
#[cfg(unix)]
pub(crate) type WakeFd = std::os::unix::io::RawFd;
#[cfg(not(unix))]
pub(crate) type WakeFd = ();

/// Wait up to `wait` for input on `tty` or a wake on `wake`; whether input
/// came, and no wake. A signal ends the wait early, as nothing.
#[cfg(unix)]
fn input_before_wake(
    tty: std::os::unix::io::RawFd,
    wake: std::os::unix::io::RawFd,
    wait: Duration,
) -> io::Result<bool> {
    use filedescriptor::{POLLIN, poll, pollfd};
    let mut ready = [
        pollfd {
            fd: tty,
            events: POLLIN,
            revents: 0,
        },
        pollfd {
            fd: wake,
            events: POLLIN,
            revents: 0,
        },
    ];
    match poll(&mut ready, Some(wait)) {
        Ok(_) => Ok(ready[0].revents != 0 && ready[1].revents == 0),
        Err(filedescriptor::Error::Poll(e)) if e.kind() == io::ErrorKind::Interrupted => Ok(false),
        Err(e) => Err(io::Error::other(e.to_string())),
    }
}

/// Where the event loop reads events and writes paints: the terminal, or
/// the [headless](crate::headless) driver.
pub trait Backend {
    /// (columns, rows).
    fn size(&self) -> (u16, u16);
    /// The next event, or `None` when `timeout` passes first. `None` for
    /// `timeout` waits as long as it takes.
    fn read(&mut self, timeout: Option<Duration>) -> io::Result<Option<Event>>;
    /// Write and flush.
    fn write(&mut self, text: &str) -> io::Result<()>;
    /// Whether [`write_frame`](Backend::write_frame) writes each frame as
    /// one synchronized update. The default: no.
    fn synchronized_output(&self) -> bool {
        false
    }
    /// Write a frame the painter made: nothing at all when it is empty,
    /// and with [`synchronized_output`](Backend::synchronized_output)
    /// between `CSI ? 2026 h` and `CSI ? 2026 l`, in the one write.
    fn write_frame(&mut self, frame: &str) -> io::Result<()> {
        if frame.is_empty() {
            Ok(())
        } else if self.synchronized_output() {
            self.write(&synchronized_update(frame))
        } else {
            self.write(frame)
        }
    }
    /// Time since the backend started (virtual in the headless driver).
    fn elapsed(&self) -> Duration;
    /// Run `command` with the terminal as it was before the session, then
    /// take the terminal back. Returns the exit code.
    fn handoff(&mut self, command: &mut Command) -> io::Result<Option<i32>>;
    /// Whether the region is the alternate screen (painted from the top).
    fn alternate_screen(&self) -> bool;
    /// The terminal row an inline region started on, for placing mouse
    /// events; 0 when unknown. The alternate screen always starts at 0.
    fn origin(&self) -> u16 {
        0
    }
    /// The plain text of a view just painted: the headless driver records
    /// it.
    fn painted(&mut self, text: &str) {
        let _ = text;
    }
    /// Whether Ctrl+Z suspends (a real terminal on Unix), rather than
    /// reaching the component as a key.
    fn can_suspend(&self) -> bool {
        false
    }
    /// Give the terminal back, stop until the shell continues the process,
    /// then take the terminal back. Only called when
    /// [`can_suspend`](Backend::can_suspend).
    fn suspend(&mut self) -> io::Result<()> {
        Ok(())
    }
    /// Whether the process was suspended from outside (SIGTSTP) and has
    /// continued since the last call: the screen is then the shell's.
    fn take_resumed(&mut self) -> bool {
        false
    }
    /// Whether [`copy`](Backend::copy) reaches a clipboard (#488): `Ok`
    /// when it does, or why not. The default: it does not.
    fn clipboard(&self) -> Result<(), String> {
        Err("this backend has no clipboard".into())
    }
    /// Put `text` on the clipboard. Only called when
    /// [`clipboard`](Backend::clipboard) is `Ok`.
    fn copy(&mut self, text: &str) -> io::Result<()> {
        let _ = text;
        Ok(())
    }
    /// A [`Waker`] that ends a [`read`](Backend::read) under way early,
    /// for another thread to call when it has something for the loop; the
    /// same one each time. The default: none, so what another thread sends
    /// waits for the read's timeout.
    fn waker(&mut self) -> Option<Waker> {
        None
    }
    /// Which key releases the backend reports (see
    /// [`Releases`](crate::Releases)). The default: none.
    fn releases_reported(&self) -> crate::Releases {
        crate::Releases::None
    }
}

/// How a session reads the terminal: the library's reader, opened on the
/// first [`Session::enter`] and kept across hand-offs and suspends.
enum Input {
    Crossterm,
    #[cfg(all(unix, feature = "termion"))]
    Termion(with_termion::Reader),
    #[cfg(feature = "termwiz")]
    Termwiz {
        held: crate::event::HeldButton,
        probed: with_termwiz::Probed,
    },
}

impl Input {
    fn open(kind: BackendKind, output: Output) -> io::Result<Input> {
        let _ = output;
        Ok(match kind {
            BackendKind::Crossterm => Input::Crossterm,
            #[cfg(all(unix, feature = "termion"))]
            BackendKind::Termion => Input::Termion(with_termion::Reader::open()?),
            #[cfg(feature = "termwiz")]
            BackendKind::Termwiz => Input::Termwiz {
                held: Default::default(),
                probed: with_termwiz::open(output)?,
            },
        })
    }
}

/// The real terminal: keys from it, paints to standard output or standard
/// error ([`SessionOptions::output`]), through the library
/// [`SessionOptions::backend`] names.
pub struct Session {
    options: SessionOptions,
    start: Instant,
    active: bool,
    /// The row the cursor was on when the session started (inline, with
    /// the mouse on).
    origin: u16,
    /// Whether the terminal takes OSC 52 copies, detected at the start.
    clipboard: rich_ext::clipboard::Clipboard,
    /// Whether keys are read with the kitty keyboard protocol.
    kitty: bool,
    /// Whether frames are written as synchronized updates.
    sync: bool,
    /// The cells' size in pixels while the mouse is reported in pixels
    /// (mode 1016): each report is read back into cells with it.
    cell: Option<(u16, u16)>,
    /// `None` until the first `enter`.
    input: Option<Input>,
    /// The [`Waker`] handed out, once one was.
    waker: Option<Waker>,
    /// Keys typed while the start-up query waited for its answer, read
    /// before anything else.
    typed: std::collections::VecDeque<Event>,
    /// When the terminal was last looked at, so a session woken over and
    /// over still reads its keys (see [`KEYS_SLICE`]).
    looked: Instant,
    /// The terminal crossterm reads, when it is not standard input, opened
    /// to wait on it beside the waker.
    #[cfg(unix)]
    tty: Option<std::fs::File>,
}

/// What the terminal answered the start-up query, asked once a process
/// with `ask` (with raw mode on), and the bytes typed while it was asked:
/// a terminal that answers none of it, not even the device attributes
/// query at its end, keeps the session waiting (a second, or a quarter
/// of one once keys come).
fn answered(ask: impl FnOnce() -> (Answers, Vec<u8>)) -> (Answers, Vec<u8>) {
    match ANSWERS.load(Ordering::SeqCst) {
        0 => {
            let (answers, typed) = if query_reaches_terminal() {
                ask()
            } else {
                (Answers::default(), Vec::new())
            };
            ANSWERS.store(answers.encode(), Ordering::SeqCst);
            (answers, typed)
        }
        bits => (Answers::decode(bits), Vec::new()),
    }
}

/// Whether the start-up query is asked. crossterm's own keyboard query
/// meant to write to `/dev/tty`, but opened it read-only, so it went to
/// standard output: in `answer=$(rich write)` it would have landed in the
/// answer, and the terminal's reply at the shell prompt afterwards. The
/// session asks directly now, but still only with standard output a
/// terminal, so a captured answer starts as it did; every backend asks the
/// same way, so a terminal is asked or not whichever drives it.
fn query_reaches_terminal() -> bool {
    use std::io::IsTerminal;
    io::stdout().is_terminal()
}

impl Session {
    /// Turn on raw mode and the options. Fails, changing nothing, when the
    /// terminal cannot do raw mode or another session is alive.
    pub fn start(options: SessionOptions) -> io::Result<Session> {
        if OWNED
            .compare_exchange(false, true, Ordering::SeqCst, Ordering::SeqCst)
            .is_err()
        {
            return Err(io::Error::new(
                io::ErrorKind::ResourceBusy,
                "a terminal session is already running",
            ));
        }
        install_hook();
        watch_signals();
        // From here on, dropping the session releases ownership, including
        // when `enter` fails part way.
        let mut session = Session {
            options,
            start: Instant::now(),
            active: false,
            origin: 0,
            clipboard: rich_ext::clipboard::Clipboard::detect(
                &crate::clipboard::SessionEnvironment,
            ),
            kitty: false,
            sync: false,
            cell: None,
            input: None,
            waker: None,
            typed: Default::default(),
            looked: Instant::now(),
            #[cfg(unix)]
            tty: None,
        };
        session.enter()?;
        Ok(session)
    }

    fn enter(&mut self) -> io::Result<()> {
        let library = self.options.backend;
        ON_STDERR.store(self.options.output == Output::Stderr, Ordering::SeqCst);
        LIBRARY.store(library.index(), Ordering::SeqCst);
        if self.input.is_none() {
            self.input = Some(Input::open(library, self.options.output)?);
        }
        library.raw_mode(true, true)?;
        ACTIVE.fetch_or(RAW, Ordering::SeqCst);
        // Active as soon as anything is on, so a failure below still
        // restores on drop.
        self.active = true;
        let mut out = String::new();
        if self.options.alternate_screen {
            ACTIVE.fetch_or(ALTERNATE, Ordering::SeqCst);
            match library.alternate_screen(true, true) {
                Some(entered) => entered?,
                None => out.push_str(&library.alternate_sequence(true)),
            }
            out.push_str("\x1b[H");
        }
        // The start-up query asks for the kitty keyboard protocol and
        // synchronized output in one round trip. With nothing to read the
        // protocol's keys (legacy keys, termion), it is not asked at all:
        // synchronized output then waits on being forced.
        let answers = if self.options.legacy_keys {
            Answers::default()
        } else {
            self.answered()
        };
        self.kitty = answers.kitty;
        if self.kitty {
            out.push_str(match (library, self.options.all_keys) {
                (BackendKind::Crossterm, true) => PUSH_KITTY_ALL,
                _ => library.kitty_push(),
            });
        }
        self.sync = self
            .options
            .synchronized_output
            .or_else(sync_from_env)
            .unwrap_or(answers.sync);
        if self.sync {
            ACTIVE.fetch_or(SYNC, Ordering::SeqCst);
        }
        let (mouse, paste) = self.capable();
        if self.options.mouse && mouse {
            out.push_str("\x1b[?1000h\x1b[?1002h\x1b[?1015h\x1b[?1006h");
            ACTIVE.fetch_or(MOUSE, Ordering::SeqCst);
            // Pixels where the terminal knows them and says how big its
            // cells are, else cells (1006) as ever (#819).
            self.cell = None;
            if answers.pixels
                && pixels_allowed(std::env::var(PIXEL_MOUSE_ENV).ok().as_deref())
                && let Some(cell) = cell_size()
            {
                out.push_str("\x1b[?1016h");
                ACTIVE.fetch_or(PIXELS, Ordering::SeqCst);
                self.cell = Some(cell);
            }
        }
        if self.options.bracketed_paste && paste {
            out.push_str("\x1b[?2004h");
            ACTIVE.fetch_or(PASTE, Ordering::SeqCst);
        }
        out.push_str("\x1b[?25l");
        {
            // The kitty flags are a stack: marked pushed with the write
            // that pushes them, under the suspend's lock, so a suspend
            // between the two neither pops flags not yet pushed nor
            // pushes them on `fg` before this pushes them again.
            let _suspending = SUSPENDING.lock().unwrap_or_else(|e| e.into_inner());
            if self.kitty {
                ACTIVE.fetch_or(KITTY, Ordering::SeqCst);
            }
            self.options.output.write(&out)?;
        }
        // Where an inline region starts, so clicks land on the right rows.
        // Asking writes a query to standard output, so only when that is
        // the terminal being painted.
        if self.options.mouse
            && !self.options.alternate_screen
            && self.options.output == Output::Stdout
        {
            self.origin = self.cursor_row().unwrap_or(0);
        }
        Ok(())
    }

    /// What the terminal answered the start-up query, for a library that
    /// reads the kitty keyboard protocol's keys; nothing asked for one that
    /// does not. Keys typed while it was asked go to the reader, so none
    /// is lost to a terminal slow to answer, or one that never does.
    fn answered(&mut self) -> Answers {
        let (answers, typed) = match self.options.backend {
            #[cfg(unix)]
            BackendKind::Crossterm => answered(ask_start),
            // Windows: crossterm's own answer, which reads no reply.
            #[cfg(not(unix))]
            BackendKind::Crossterm => answered(|| {
                let kitty = crossterm::terminal::supports_keyboard_enhancement().unwrap_or(false);
                (
                    Answers {
                        kitty,
                        ..Answers::default()
                    },
                    Vec::new(),
                )
            }),
            // termion's reader does not know the protocol's keys.
            #[cfg(all(unix, feature = "termion"))]
            BackendKind::Termion => (Answers::default(), Vec::new()),
            #[cfg(all(unix, feature = "termwiz"))]
            BackendKind::Termwiz => answered(ask_start),
            #[cfg(all(not(unix), feature = "termwiz"))]
            BackendKind::Termwiz => (Answers::default(), Vec::new()),
        };
        #[cfg(unix)]
        if !typed.is_empty() {
            match &mut self.input {
                #[cfg(feature = "termwiz")]
                Some(Input::Termwiz { probed, .. }) => with_termwiz::unread(probed, &typed),
                // crossterm reads only the terminal: what was typed is read
                // here, as the legacy terminal it still is before the
                // protocol is pushed.
                _ => self.typed.extend(crate::event::from_legacy_bytes(&typed)),
            }
        }
        // Elsewhere nothing is read before the library's reader opens.
        #[cfg(not(unix))]
        debug_assert!(typed.is_empty());
        answers
    }

    /// Whether the library's probe of the terminal allows the mouse and
    /// bracketed paste.
    fn capable(&self) -> (bool, bool) {
        match &self.input {
            #[cfg(feature = "termwiz")]
            Some(Input::Termwiz { probed, .. }) => (probed.mouse, probed.paste),
            _ => (true, true),
        }
    }

    /// The cursor's row, asked of the terminal. Keys that came with the
    /// answer go to the reader.
    fn cursor_row(&mut self) -> Option<u16> {
        match self.options.backend {
            BackendKind::Crossterm => crossterm::cursor::position().ok().map(|(_, row)| row),
            #[cfg(all(unix, any(feature = "termion", feature = "termwiz")))]
            #[allow(unreachable_patterns)]
            _ => {
                let (row, rest) = ask_cursor_row();
                match &mut self.input {
                    #[cfg(feature = "termion")]
                    Some(Input::Termion(reader)) => reader.unread(&rest),
                    #[cfg(feature = "termwiz")]
                    Some(Input::Termwiz { probed, .. }) => with_termwiz::unread(probed, &rest),
                    _ => {}
                }
                row
            }
            #[cfg(all(not(unix), feature = "termwiz"))]
            _ => None,
        }
    }

    /// The terminal's size, as the library measures it.
    fn measure(&self) -> io::Result<(u16, u16)> {
        match &self.input {
            #[cfg(all(unix, feature = "termion"))]
            Some(Input::Termion(reader)) => reader.size(),
            #[cfg(feature = "termwiz")]
            Some(Input::Termwiz { .. }) => with_termwiz::size(),
            _ => crossterm::terminal::size(),
        }
    }

    /// The next event within `wait`, or `None`: the wait passed, or the
    /// library read something components do not see (focus changes, a
    /// sequence it does not know).
    /// `event` with a pixel report read back into cells, while the mouse
    /// is reported in pixels; a resize measures the cells again.
    fn in_cells(&mut self, event: Event) -> Event {
        let Some(cell) = self.cell else {
            return event;
        };
        match event {
            Event::Mouse(mouse) => match mouse.reread_as_pixels(cell) {
                Some(read) => Event::Mouse(read),
                None => Event::Mouse(mouse),
            },
            Event::Resize { .. } => {
                if let Some(size) = cell_size() {
                    self.cell = Some(size);
                }
                event
            }
            event => event,
        }
    }

    fn next_event(&mut self, wait: Duration) -> io::Result<Option<Event>> {
        let kitty = self.kitty;
        #[cfg(unix)]
        let wake: Option<WakeFd> = self.waker.as_ref().and_then(Waker::fd);
        #[cfg(not(unix))]
        let wake: Option<WakeFd> = None;
        match &mut self.input {
            #[cfg(all(unix, feature = "termion"))]
            Some(Input::Termion(reader)) => reader.next(wait, wake),
            #[cfg(feature = "termwiz")]
            Some(Input::Termwiz { held, probed }) => Ok(with_termwiz::poll(probed, wait, wake)?
                .and_then(|event| {
                    if kitty {
                        crate::event::from_termwiz_kitty(event, held)
                    } else {
                        crate::event::from_termwiz(event, held)
                    }
                })),
            _ => {
                // With a waker: wait on the terminal and the waker together,
                // then let crossterm read what came. It may hold events
                // already read, so it is asked first; a millisecond, as with
                // no time at all it does not look at what it holds.
                #[cfg(unix)]
                if let Some(wake) = wake {
                    if !crossterm::event::poll(Duration::from_millis(1))? {
                        let tty = self.crossterm_tty()?;
                        // Nothing, or woken: back to the loop.
                        if !input_before_wake(tty, wake, wait)? {
                            return Ok(None);
                        }
                        // Input: a sequence's rest may come after its
                        // start, as crossterm would wait for it.
                        if !crossterm::event::poll(wait.min(Duration::from_millis(10)))? {
                            return Ok(None);
                        }
                    }
                } else if !crossterm::event::poll(wait)? {
                    return Ok(None);
                }
                #[cfg(not(unix))]
                {
                    let _ = wake;
                    if !crossterm::event::poll(wait)? {
                        return Ok(None);
                    }
                }
                let event = crossterm::event::read()?;
                Ok(if kitty {
                    from_crossterm_kitty(event)
                } else {
                    from_crossterm(event)
                })
            }
        }
    }

    /// The terminal crossterm reads, as it finds it: standard input when
    /// that is a terminal, else `/dev/tty`.
    #[cfg(unix)]
    fn crossterm_tty(&mut self) -> io::Result<std::os::unix::io::RawFd> {
        use std::io::IsTerminal;
        use std::os::unix::io::AsRawFd;
        if io::stdin().is_terminal() {
            return Ok(io::stdin().as_raw_fd());
        }
        if self.tty.is_none() {
            self.tty = Some(std::fs::File::open("/dev/tty")?);
        }
        Ok(self.tty.as_ref().map_or(0, |tty| tty.as_raw_fd()))
    }

    /// Restore the terminal. Also done on drop and on panic.
    pub fn leave(&mut self) -> io::Result<()> {
        if !std::mem::take(&mut self.active) {
            return Ok(());
        }
        // After any suspend under way has turned the modes back on, so
        // this restores them rather than being undone by it.
        let _suspending = SUSPENDING.lock().unwrap_or_else(|e| e.into_inner());
        restore(true)
    }

    pub fn options(&self) -> SessionOptions {
        self.options
    }

    /// Whether keys are read with the kitty keyboard protocol: the terminal
    /// has it, the backend reads it, and [`SessionOptions::legacy_keys`] is
    /// off. Every key is then [`exact`](crate::Key::exact), and with
    /// crossterm releases arrive.
    pub fn kitty_keys(&self) -> bool {
        self.kitty
    }

    /// Which key releases arrive as [`Event::KeyUp`]: with crossterm and
    /// the kitty keyboard protocol, every key's but the text keys', or
    /// every key's with [`SessionOptions::all_keys`]; every key's on the
    /// Windows console; none otherwise.
    pub fn releases_reported(&self) -> crate::Releases {
        use crate::Releases;
        match self.options.backend {
            BackendKind::Crossterm if cfg!(windows) => Releases::All,
            BackendKind::Crossterm if self.kitty && self.options.all_keys => Releases::All,
            BackendKind::Crossterm if self.kitty => Releases::ExceptText,
            #[allow(unreachable_patterns)]
            _ => Releases::None,
        }
    }

    /// Whether frames are written as synchronized updates: forced by
    /// [`SessionOptions::synchronized_output`] or `RICH_SYNC_OUTPUT`, or
    /// the terminal answered that it knows mode 2026.
    pub fn synchronized_output(&self) -> bool {
        self.sync
    }

    /// The colours the backend's own probe of the terminal found, when it
    /// has one (termwiz's: terminfo and `COLORTERM`); `None` to leave it to
    /// rich's detection. `Some(None)` is no colour.
    pub fn color_system(&self) -> Option<Option<rich::ColorSystem>> {
        match &self.input {
            #[cfg(feature = "termwiz")]
            Some(Input::Termwiz { probed, .. }) => Some(probed.color),
            _ => None,
        }
    }

    /// A resize to the current size, which repaints the whole view: after a
    /// suspend, what is on the screen is the shell's.
    fn repaint(&mut self) -> Event {
        if self.options.mouse
            && !self.options.alternate_screen
            && self.options.output == Output::Stdout
        {
            self.origin = self.cursor_row().unwrap_or(0);
        }
        let (columns, rows) = self.measure().unwrap_or((80, 24));
        Event::Resize { columns, rows }
    }
}

impl Drop for Session {
    fn drop(&mut self) {
        let _ = self.leave();
        if self.input.take().is_some() {
            self.options.backend.release();
        }
        OWNED.store(false, Ordering::SeqCst);
    }
}

impl Backend for Session {
    fn size(&self) -> (u16, u16) {
        self.measure().unwrap_or((80, 24))
    }

    fn read(&mut self, timeout: Option<Duration>) -> io::Result<Option<Event>> {
        if let Some(event) = self.typed.pop_front() {
            return Ok(Some(event));
        }
        let end = timeout.map(|timeout| Instant::now() + timeout);
        loop {
            // Back from a SIGTSTP sent from outside: the screen is the
            // shell's, so repaint all of it.
            if RESUMED.load(Ordering::SeqCst) {
                return Ok(Some(self.repaint()));
            }
            // Woken: back to the loop, which has something to pick up. An
            // app woken over and over (frames arriving faster than it draws
            // them) would never read the keyboard, so every `KEYS_SLICE` a
            // key already waiting comes first, with no wait; the loop picks
            // up what woke it all the same.
            if self.waker.as_ref().is_some_and(Waker::take) {
                if self.looked.elapsed() < KEYS_SLICE {
                    return Ok(None);
                }
                self.looked = Instant::now();
                return Ok(self.next_event(Duration::ZERO)?.map(|e| self.in_cells(e)));
            }
            // Short waits, so a resume is noticed without a key; shorter
            // where the waker cannot be waited on with the terminal.
            let mut wait = match end {
                Some(end) => end.saturating_duration_since(Instant::now()),
                None => Duration::from_secs(3600),
            }
            .min(Duration::from_millis(250));
            if self.waker.is_some() && !cfg!(unix) {
                wait = wait.min(WAKE_SLICE);
            }
            // Events the library reports that components do not see (focus)
            // are skipped, not returned as a timeout.
            self.looked = Instant::now();
            if let Some(event) = self.next_event(wait)? {
                return Ok(Some(self.in_cells(event)));
            }
            if end.is_some_and(|end| Instant::now() >= end) {
                return Ok(None);
            }
        }
    }

    fn write(&mut self, text: &str) -> io::Result<()> {
        self.options.output.write(text)
    }

    /// The session's [`Waker`]: on Unix the terminal and it are waited on
    /// in one `poll`, on every backend; elsewhere a read looks at it every
    /// few milliseconds.
    fn waker(&mut self) -> Option<Waker> {
        Some(self.waker.get_or_insert_with(Waker::new).clone())
    }

    fn releases_reported(&self) -> crate::Releases {
        Session::releases_reported(self)
    }

    fn synchronized_output(&self) -> bool {
        self.sync
    }

    fn clipboard(&self) -> Result<(), String> {
        let field = self.clipboard.field();
        if field.value {
            Ok(())
        } else {
            Err(field.reason.clone())
        }
    }

    fn copy(&mut self, text: &str) -> io::Result<()> {
        let sequence = rich_ext::clipboard::osc52(text)
            .map_err(|error| io::Error::new(io::ErrorKind::InvalidInput, error.to_string()))?;
        self.options.output.write(&sequence)
    }

    fn elapsed(&self) -> Duration {
        self.start.elapsed()
    }

    fn handoff(&mut self, command: &mut Command) -> io::Result<Option<i32>> {
        self.leave()?;
        let status = command.status();
        self.enter()?;
        Ok(status?.code())
    }

    fn alternate_screen(&self) -> bool {
        self.options.alternate_screen
    }

    fn origin(&self) -> u16 {
        self.origin
    }

    fn can_suspend(&self) -> bool {
        cfg!(unix)
    }

    fn suspend(&mut self) -> io::Result<()> {
        #[cfg(unix)]
        {
            suspend();
            self.repaint();
        }
        Ok(())
    }

    fn take_resumed(&mut self) -> bool {
        RESUMED.swap(false, Ordering::SeqCst)
    }
}

#[cfg(test)]
mod tests {
    use super::*;

    #[test]
    fn backends_are_named() {
        assert_eq!(BackendKind::default(), BackendKind::Crossterm);
        assert_eq!(BackendKind::ALL[0], BackendKind::Crossterm);
        for kind in BackendKind::ALL {
            assert_eq!(BackendKind::from_name(kind.name()), Some(*kind));
            assert_eq!(
                BackendKind::from_name(&kind.name().to_uppercase()),
                Some(*kind)
            );
            assert_eq!(kind.to_string(), kind.name());
        }
        assert_eq!(BackendKind::from_name("curses"), None);
        assert_eq!(
            BackendKind::ALL.len(),
            1 + usize::from(cfg!(all(unix, feature = "termion")))
                + usize::from(cfg!(feature = "termwiz"))
        );
    }

    #[test]
    fn every_backend_leaves_the_same_modes() {
        let all = RAW | ALTERNATE | MOUSE | PASTE | KITTY;
        let expected =
            "\x1b[<1u\x1b[?1006l\x1b[?1015l\x1b[?1003l\x1b[?1002l\x1b[?1000l\x1b[?2004l\x1b[?25h";
        for kind in BackendKind::ALL {
            let out = undo(all, *kind);
            assert!(out.starts_with(expected), "{kind}: {out:?}");
            // The alternate screen last: in the sequences, or by the
            // library's own call.
            let rest = &out[expected.len()..];
            assert!(rest == "\x1b[?1049l" || rest.is_empty(), "{kind}: {rest:?}");
            assert_eq!(rest.is_empty(), kind.owns_alternate_screen());
        }
    }

    #[test]
    fn answers_are_stripped_from_what_was_typed() {
        assert_eq!(strip_answers(b"\x1b[?2026;2$yq\x1b[?62c"), b"q");
        assert_eq!(strip_answers(b"ab\x1b[?62"), b"ab");
        assert_eq!(strip_answers(b"\x1b[A\x1b"), b"\x1b[A\x1b");
        assert!(strip_answers(b"\x1b[?0u\x1b[?62c").is_empty());
    }

    #[test]
    fn private_answers_are_found() {
        let lasts = |bytes: &[u8]| -> Vec<u8> { private_answers(bytes).map(|a| a.last).collect() };
        assert_eq!(lasts(b"x\x1b[?0u\x1b[?62;22c"), b"uc");
        assert_eq!(lasts(b"\x1b[?62"), b"");
        let decrqm: Vec<_> = private_answers(b"\x1b[?2026;2$y").collect();
        assert_eq!(
            decrqm,
            [PrivateAnswer {
                parameters: b"2026;2",
                intermediates: b"$",
                last: b'y',
            }]
        );
        // An answer broken off by another sequence is passed over, and the
        // next one still read.
        assert_eq!(lasts(b"\x1b[?2026\x1b[?62c"), b"c");
    }

    #[test]
    fn the_start_up_answers_are_read() {
        let read = |bytes: &[u8]| Answers::read(bytes);
        let both = Answers {
            kitty: true,
            sync: true,
            pixels: false,
        };
        let sync = Answers {
            sync: true,
            ..Answers::default()
        };
        // Supported: set or reset (recognised), or permanently set.
        assert_eq!(read(b"\x1b[?2026;2$y\x1b[?0u\x1b[?62;22c"), Some(both));
        assert_eq!(read(b"\x1b[?2026;1$y\x1b[?62c"), Some(sync));
        assert_eq!(read(b"\x1b[?2026;3$y\x1b[?62c"), Some(sync));
        // Not recognised, or permanently reset: not supported.
        assert_eq!(read(b"\x1b[?2026;0$y\x1b[?62c"), Some(Answers::default()));
        assert_eq!(read(b"\x1b[?2026;4$y\x1b[?62c"), Some(Answers::default()));
        // No report at all (a terminal that does not know DECRQM).
        assert_eq!(
            read(b"\x1b[?1u\x1b[?62c"),
            Some(Answers {
                kitty: true,
                ..Answers::default()
            })
        );
        // Another mode's report says nothing about 2026.
        assert_eq!(read(b"\x1b[?2004;1$y\x1b[?62c"), Some(Answers::default()));
        // Until the device attributes come, the answer is not complete:
        // the session waits, then goes on with neither.
        assert_eq!(read(b""), None);
        assert_eq!(read(b"\x1b[?2026;2$y\x1b[?0u"), None);
        assert_eq!(read(b"\x1b[?2026;2$y\x1b[?6"), None);
        // Keys typed while it waits, between and inside the answers' runs,
        // are passed over.
        assert_eq!(
            read(b"j\x1b[A\x1b[?2026;2$yk\x1b[?0u\r\x1b[?62;22c"),
            Some(both)
        );
        // SGR-Pixels (1016), asked after 2026, read on its own (#819).
        let pixels = Answers {
            pixels: true,
            ..Answers::default()
        };
        let all = Answers {
            pixels: true,
            ..both
        };
        assert_eq!(read(b"\x1b[?1016;2$y\x1b[?62c"), Some(pixels));
        assert_eq!(read(b"\x1b[?1016;1$y\x1b[?62c"), Some(pixels));
        assert_eq!(read(b"\x1b[?1016;0$y\x1b[?62c"), Some(Answers::default()));
        assert_eq!(read(b"\x1b[?1016;4$y\x1b[?62c"), Some(Answers::default()));
        assert_eq!(
            read(b"\x1b[?2026;2$y\x1b[?1016;2$y\x1b[?0u\x1b[?62;22c"),
            Some(all)
        );
        // 2026's report says nothing about 1016, and the other way round.
        assert_eq!(read(b"\x1b[?2026;2$y\x1b[?62c"), Some(sync));
        for answers in [Answers::default(), sync, both, pixels, all] {
            assert_ne!(answers.encode(), 0);
            assert_eq!(Answers::decode(answers.encode()), answers);
        }
    }

    #[test]
    fn the_cell_size_comes_from_the_window_size_in_pixels() {
        assert_eq!(cell_of(80, 24, 800, 480), Some((10, 20)));
        // Rounded down: a window with a margin of a few pixels.
        assert_eq!(cell_of(80, 24, 805, 490), Some((10, 20)));
        // A terminal that leaves the pixel fields 0, or no window.
        assert_eq!(cell_of(80, 24, 0, 0), None);
        assert_eq!(cell_of(0, 0, 800, 480), None);
        assert_eq!(cell_of(80, 24, 40, 480), None);
    }

    #[test]
    fn pixel_reports_are_allowed_unless_turned_off() {
        assert!(pixels_allowed(None));
        assert!(pixels_allowed(Some("1")));
        assert!(!pixels_allowed(Some("0")));
        assert!(!pixels_allowed(Some(" 0 ")));
    }

    #[test]
    fn the_restore_turns_pixel_reports_off_before_the_mouse() {
        for kind in BackendKind::ALL {
            let out = undo(RAW | MOUSE | PIXELS, *kind);
            assert!(out.starts_with("\x1b[?1016l\x1b[?1006l"), "{kind}: {out:?}");
            assert!(!undo(RAW | MOUSE, *kind).contains("1016"));
        }
    }

    #[test]
    fn a_cursor_report_is_found_among_other_input() {
        assert_eq!(cursor_report(b"\x1b[12;1R"), Some((11, 0..7)));
        // After an arrow key, a mouse report or a sequence cut short, and
        // with a key after it.
        assert_eq!(cursor_report(b"\x1b[A\x1b[12;1R"), Some((11, 3..10)));
        assert_eq!(
            cursor_report(b"\x1b[<0;2;13M\x1b[3;40Rx"),
            Some((2, 10..17))
        );
        assert_eq!(cursor_report(b"\x1b[1;\x1b[5;1R"), Some((4, 4..10)));
        // Not complete, or not a report.
        for bytes in [
            &b"\x1b[12;"[..],
            b"\x1b[12R",
            b"\x1b[;1R",
            b"\x1b[1;5C",
            b"12;1R",
        ] {
            assert_eq!(cursor_report(bytes), None, "{bytes:?}");
        }
    }

    #[test]
    fn the_environment_forces_synchronized_output() {
        assert_eq!(sync_override(Some("0")), Some(false));
        assert_eq!(sync_override(Some("1")), Some(true));
        assert_eq!(sync_override(Some(" 1\n")), Some(true));
        assert_eq!(sync_override(None), None);
        assert_eq!(sync_override(Some("")), None);
        assert_eq!(sync_override(Some("auto")), None);
    }

    #[test]
    fn a_frame_is_one_synchronized_update_and_an_empty_one_nothing() {
        assert_eq!(
            synchronized_update("\x1b[2;1Hhi\x1b[?25l"),
            "\x1b[?2026h\x1b[2;1Hhi\x1b[?25l\x1b[?2026l"
        );
        assert_eq!(synchronized_update(""), "");
    }

    #[test]
    fn the_restore_ends_a_synchronized_update_first() {
        for kind in BackendKind::ALL {
            let out = undo(RAW | SYNC | MOUSE, *kind);
            assert!(out.starts_with("\x1b[?2026l\x1b[?1006l"), "{kind}: {out:?}");
            assert_eq!(out.matches("2026").count(), 1);
            // Off, nothing about it.
            assert!(!undo(RAW | MOUSE, *kind).contains("2026"));
        }
    }
}