1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
//! Prints a counter over the UART0 console, once a second or so, with
//! the GPIO4 LED toggling alongside it.
//!
//! The first line is the core's `MIDR` Main ID register (see
//! [`rpi_hal::cpu::main_id`] for how to read it): on a board whose
//! console has never worked before, it answers "are characters getting
//! out" and "is this the chip the binary was built for" at the same
//! time. `0x410fb767` is an ARM1176JZF-S (Pi 1, Pi Zero), `0x410fc075`
//! a Cortex-A7 (Pi 2), `0x410fd034` a Cortex-A53 (Pi 3), `0x414fd0b1` a
//! Cortex-A76 (Pi 5).
//!
//! Wiring is the standard console setup: a 3.3V USB-serial cable on
//! GPIO14/15, 115200 8N1, plus an LED and resistor on GPIO4. See
//! `docs/getting-started.md`.
#![no_std]
#![no_main]
use core::fmt::Write;
use embedded_hal::digital::StatefulOutputPin;
use rpi_hal::cpu;
use rpi_hal::gpio::{Input, Pin};
use rpi_hal::halt;
use rpi_hal::{pac, uart::Uart};
#[panic_handler]
fn panic(info: &core::panic::PanicInfo) -> ! {
let peripherals = unsafe { pac::Peripherals::steal() };
let mut uart = Uart::init(&peripherals.GPIO, peripherals.UART0);
let _ = writeln!(uart, "PANIC: {info}");
halt();
}
#[no_mangle]
pub extern "C" fn kmain() -> ! {
let peripherals = unsafe { pac::Peripherals::steal() };
let mut uart = Uart::init(&peripherals.GPIO, peripherals.UART0);
// Which core is actually running this -- see the module header for
// what the value means. First, so that a console that only manages
// one line still says something useful.
let _ = writeln!(uart, "rpi-hal: MIDR {:#010x}", cpu::main_id());
// LED heartbeat: toggles every loop iteration regardless of
// whether the UART message actually gets anywhere, so you can
// tell the loop is alive even with nothing showing in a terminal.
let mut led = Pin::<4, Input>::new(peripherals.GPIO).into_output();
let mut count: u32 = 0;
loop {
let _ = writeln!(uart, "hello from rpi-hal ({count})");
count += 1;
let _ = led.toggle();
delay(10_000_000);
}
}
fn delay(cycles: u32) {
for _ in 0..cycles {
unsafe { core::arch::asm!("nop") };
}
}