#[doc = "Reader of register INTR"]
pub type R = crate::R<u32, super::INTR>;
#[doc = "Reader of field `EP_STALL_NAK`"]
pub type EP_STALL_NAK_R = crate::R<bool, bool>;
#[doc = "Reader of field `ABORT_DONE`"]
pub type ABORT_DONE_R = crate::R<bool, bool>;
#[doc = "Reader of field `DEV_SOF`"]
pub type DEV_SOF_R = crate::R<bool, bool>;
#[doc = "Reader of field `SETUP_REQ`"]
pub type SETUP_REQ_R = crate::R<bool, bool>;
#[doc = "Reader of field `DEV_RESUME_FROM_HOST`"]
pub type DEV_RESUME_FROM_HOST_R = crate::R<bool, bool>;
#[doc = "Reader of field `DEV_SUSPEND`"]
pub type DEV_SUSPEND_R = crate::R<bool, bool>;
#[doc = "Reader of field `DEV_CONN_DIS`"]
pub type DEV_CONN_DIS_R = crate::R<bool, bool>;
#[doc = "Reader of field `BUS_RESET`"]
pub type BUS_RESET_R = crate::R<bool, bool>;
#[doc = "Reader of field `VBUS_DETECT`"]
pub type VBUS_DETECT_R = crate::R<bool, bool>;
#[doc = "Reader of field `STALL`"]
pub type STALL_R = crate::R<bool, bool>;
#[doc = "Reader of field `ERROR_CRC`"]
pub type ERROR_CRC_R = crate::R<bool, bool>;
#[doc = "Reader of field `ERROR_BIT_STUFF`"]
pub type ERROR_BIT_STUFF_R = crate::R<bool, bool>;
#[doc = "Reader of field `ERROR_RX_OVERFLOW`"]
pub type ERROR_RX_OVERFLOW_R = crate::R<bool, bool>;
#[doc = "Reader of field `ERROR_RX_TIMEOUT`"]
pub type ERROR_RX_TIMEOUT_R = crate::R<bool, bool>;
#[doc = "Reader of field `ERROR_DATA_SEQ`"]
pub type ERROR_DATA_SEQ_R = crate::R<bool, bool>;
#[doc = "Reader of field `BUFF_STATUS`"]
pub type BUFF_STATUS_R = crate::R<bool, bool>;
#[doc = "Reader of field `TRANS_COMPLETE`"]
pub type TRANS_COMPLETE_R = crate::R<bool, bool>;
#[doc = "Reader of field `HOST_SOF`"]
pub type HOST_SOF_R = crate::R<bool, bool>;
#[doc = "Reader of field `HOST_RESUME`"]
pub type HOST_RESUME_R = crate::R<bool, bool>;
#[doc = "Reader of field `HOST_CONN_DIS`"]
pub type HOST_CONN_DIS_R = crate::R<bool, bool>;
impl R {
#[doc = "Bit 19 - Raised when any bit in EP_STATUS_STALL_NAK is set. Clear by clearing all bits in EP_STATUS_STALL_NAK."]
#[inline(always)]
pub fn ep_stall_nak(&self) -> EP_STALL_NAK_R {
EP_STALL_NAK_R::new(((self.bits >> 19) & 0x01) != 0)
}
#[doc = "Bit 18 - Raised when any bit in ABORT_DONE is set. Clear by clearing all bits in ABORT_DONE."]
#[inline(always)]
pub fn abort_done(&self) -> ABORT_DONE_R {
ABORT_DONE_R::new(((self.bits >> 18) & 0x01) != 0)
}
#[doc = "Bit 17 - Set every time the device receives a SOF (Start of Frame) packet. Cleared by reading SOF_RD"]
#[inline(always)]
pub fn dev_sof(&self) -> DEV_SOF_R {
DEV_SOF_R::new(((self.bits >> 17) & 0x01) != 0)
}
#[doc = "Bit 16 - Device. Source: SIE_STATUS.SETUP_REC"]
#[inline(always)]
pub fn setup_req(&self) -> SETUP_REQ_R {
SETUP_REQ_R::new(((self.bits >> 16) & 0x01) != 0)
}
#[doc = "Bit 15 - Set when the device receives a resume from the host. Cleared by writing to SIE_STATUS.RESUME"]
#[inline(always)]
pub fn dev_resume_from_host(&self) -> DEV_RESUME_FROM_HOST_R {
DEV_RESUME_FROM_HOST_R::new(((self.bits >> 15) & 0x01) != 0)
}
#[doc = "Bit 14 - Set when the device suspend state changes. Cleared by writing to SIE_STATUS.SUSPENDED"]
#[inline(always)]
pub fn dev_suspend(&self) -> DEV_SUSPEND_R {
DEV_SUSPEND_R::new(((self.bits >> 14) & 0x01) != 0)
}
#[doc = "Bit 13 - Set when the device connection state changes. Cleared by writing to SIE_STATUS.CONNECTED"]
#[inline(always)]
pub fn dev_conn_dis(&self) -> DEV_CONN_DIS_R {
DEV_CONN_DIS_R::new(((self.bits >> 13) & 0x01) != 0)
}
#[doc = "Bit 12 - Source: SIE_STATUS.BUS_RESET"]
#[inline(always)]
pub fn bus_reset(&self) -> BUS_RESET_R {
BUS_RESET_R::new(((self.bits >> 12) & 0x01) != 0)
}
#[doc = "Bit 11 - Source: SIE_STATUS.VBUS_DETECT"]
#[inline(always)]
pub fn vbus_detect(&self) -> VBUS_DETECT_R {
VBUS_DETECT_R::new(((self.bits >> 11) & 0x01) != 0)
}
#[doc = "Bit 10 - Source: SIE_STATUS.STALL_REC"]
#[inline(always)]
pub fn stall(&self) -> STALL_R {
STALL_R::new(((self.bits >> 10) & 0x01) != 0)
}
#[doc = "Bit 9 - Source: SIE_STATUS.CRC_ERROR"]
#[inline(always)]
pub fn error_crc(&self) -> ERROR_CRC_R {
ERROR_CRC_R::new(((self.bits >> 9) & 0x01) != 0)
}
#[doc = "Bit 8 - Source: SIE_STATUS.BIT_STUFF_ERROR"]
#[inline(always)]
pub fn error_bit_stuff(&self) -> ERROR_BIT_STUFF_R {
ERROR_BIT_STUFF_R::new(((self.bits >> 8) & 0x01) != 0)
}
#[doc = "Bit 7 - Source: SIE_STATUS.RX_OVERFLOW"]
#[inline(always)]
pub fn error_rx_overflow(&self) -> ERROR_RX_OVERFLOW_R {
ERROR_RX_OVERFLOW_R::new(((self.bits >> 7) & 0x01) != 0)
}
#[doc = "Bit 6 - Source: SIE_STATUS.RX_TIMEOUT"]
#[inline(always)]
pub fn error_rx_timeout(&self) -> ERROR_RX_TIMEOUT_R {
ERROR_RX_TIMEOUT_R::new(((self.bits >> 6) & 0x01) != 0)
}
#[doc = "Bit 5 - Source: SIE_STATUS.DATA_SEQ_ERROR"]
#[inline(always)]
pub fn error_data_seq(&self) -> ERROR_DATA_SEQ_R {
ERROR_DATA_SEQ_R::new(((self.bits >> 5) & 0x01) != 0)
}
#[doc = "Bit 4 - Raised when any bit in BUFF_STATUS is set. Clear by clearing all bits in BUFF_STATUS."]
#[inline(always)]
pub fn buff_status(&self) -> BUFF_STATUS_R {
BUFF_STATUS_R::new(((self.bits >> 4) & 0x01) != 0)
}
#[doc = "Bit 3 - Raised every time SIE_STATUS.TRANS_COMPLETE is set. Clear by writing to this bit."]
#[inline(always)]
pub fn trans_complete(&self) -> TRANS_COMPLETE_R {
TRANS_COMPLETE_R::new(((self.bits >> 3) & 0x01) != 0)
}
#[doc = "Bit 2 - Host: raised every time the host sends a SOF (Start of Frame). Cleared by reading SOF_RD"]
#[inline(always)]
pub fn host_sof(&self) -> HOST_SOF_R {
HOST_SOF_R::new(((self.bits >> 2) & 0x01) != 0)
}
#[doc = "Bit 1 - Host: raised when a device wakes up the host. Cleared by writing to SIE_STATUS.RESUME"]
#[inline(always)]
pub fn host_resume(&self) -> HOST_RESUME_R {
HOST_RESUME_R::new(((self.bits >> 1) & 0x01) != 0)
}
#[doc = "Bit 0 - Host: raised when a device is connected or disconnected (i.e. when SIE_STATUS.SPEED changes). Cleared by writing to SIE_STATUS.SPEED"]
#[inline(always)]
pub fn host_conn_dis(&self) -> HOST_CONN_DIS_R {
HOST_CONN_DIS_R::new((self.bits & 0x01) != 0)
}
}