rigless 0.2.0

// Copyright (c) 2026 Rigless Labs.
// SPDX-License-Identifier: MIT OR Apache-2.0
//! What joins a [`Bus`] to the models that give its peripherals behavior.
//!
//! A [`Bus`] knows where an address lands and what that register holds. It owns no models. An MCU
//! owns them as fields of its own type, like `mcu.clocks` and `mcu.serial`, and implements [`Mcu`]
//! to say which field answers for which slot. That one `match` is the whole of the mapping, and it
//! is why nothing after construction reaches a model by name or downcasts to its type.
//!
//! An SoC module writes its fields, its dispatch and what its part does at a reset and at a stop,
//! the five methods of [`Mcu`]. Everything the runtime does with an MCU is [`Operate`]:
//! [`Operate::read`], [`Operate::write`] and [`Operate::advance_to`] are written once against
//! [`Mcu::split`], and every MCU has them, so a part can't change them and a wrapper can't lose them.
//!
//! A board adds a chip to a part with [`Wired`], which puts it in a [`Window`] of the part's
//! addresses. It adds memory with [`Bus::add_region`].

use crate::chip::parallel;
use crate::device::{
    ClockChange, DeviceContext, ErasedDevice, InterruptChange, LineChange, PendingAccess,
    RegisterFile, RequestChange, ResetCause, Told,
};
use crate::emulator::{AccessKind, Error as EmulatorError, Memory};
use crate::snapshot::{Reader, Store, Writer};
use crate::soc::{
    Bus, Cpu, Error, Fault, NO_REGISTERS, RegisterSpec, SAME_INSTANT_LIMIT, SETTLE_LIMIT, Width,
    Window,
};
use crate::time::{EventId, VirtualNanos};

/// A requested access the bus refused.
///
/// A model is answered only when its access lands, so a refusal is otherwise silent: the controller waits
/// for a word that never arrives. A run collects these the way it collects the addresses a firmware reached
/// and nothing answered.
#[derive(Debug, Clone, PartialEq, Eq)]
pub struct Refused {
    /// The instance that asked.
    pub by: &'static str,
    /// The address it asked for.
    pub address: u64,
    /// Why the bus refused.
    pub fault: Fault,
}

/// One whole microcontroller: a bus, and a model for each of its slots that has one.
///
/// Every method is required, and they're all an SoC module writes by hand. [`Mcu::split`] borrows
/// the bus and one model apart, which is what lets a model be called with its own register file.
/// [`Mcu::reset`] and [`Mcu::poll`] are the part's own: a part that keeps what survives a reset or
/// polls only the models that take outside input says so there, and one that doesn't calls
/// [`Operate::reset_every_model`] and [`Operate::poll_every_model`]. A type that wraps a part
/// forwards all five, since none has a default to fall back on, and [`Wired`] does it for a board
/// that adds a chip.
pub trait Mcu {
    /// The bus, for reading the map and what the registers hold.
    fn bus(&self) -> &Bus;

    /// The bus, mutably. `split` gives it alongside a model, and this gives it alone.
    fn bus_mut(&mut self) -> &mut Bus;

    /// A system reset at `at`: the part as its firmware finds it at the reset vector, every register
    /// at its reset value and nothing in flight, with whatever a board put on its pins still there.
    /// A chip a controller carries through it hears so at `at`, through its seam's `restarted`,
    /// since every event it scheduled went with the reset. `cause` is why,
    /// for the part's own reset flags. A bus with no such flags ignores it. When a second cause joins a
    /// restart, like the core's own request at the stop a model asked at, it's called again with that
    /// cause, so the flags gain both.
    ///
    /// [`Operate::reset_every_model`] resets the bus, every register and nothing scheduled, driven or
    /// waiting for an answer, and tells every model through
    /// [`Device::reset`](crate::device::Device::reset), so each puts back what a reset clears in
    /// it. A part can instead rebuild itself around what's on its pins, like the parts in this crate
    /// do. A part that rebuilds keeps the regions and windows a board added to its bus by calling
    /// [`Bus::keep_added`].
    fn reset(&mut self, at: VirtualNanos, cause: ResetCause);

    /// Gives the models a look outside at `now`, which the session does at every stop of the
    /// target. See [`Device::poll`](crate::device::Device::poll). [`Operate::poll_every_model`]
    /// asks every one.
    fn poll(&mut self, now: VirtualNanos);

    /// The bus, and the model that answers for `slot` if this MCU has one, borrowed apart.
    ///
    /// The implementation is one `match` from the slot to a field. A board can add slots after the
    /// part's own with [`Bus::add_window`], so a slot the part doesn't know answers `None`:
    ///
    /// ```ignore
    /// fn split(&mut self, slot: usize) -> (&mut Bus, Option<&mut dyn ErasedDevice>) {
    ///     let Self { bus, clocks, serial, wiring, .. } = self;
    ///     let model: Option<&mut dyn ErasedDevice> = match wiring.get(slot) {
    ///         Some(Field::Clocks) => Some(clocks),
    ///         Some(Field::Serial) => Some(serial),
    ///         Some(Field::None) | None => None,
    ///     };
    ///     (bus, model)
    /// }
    /// ```
    fn split(&mut self, slot: usize) -> (&mut Bus, Option<&mut dyn ErasedDevice>);
}

/// What the runtime does with an MCU: serve an access, move it on in time, settle what its models
/// asked for, and take what they drove. Every [`Mcu`] has it, written once against
/// [`Mcu::split`], and no part changes it. Bring it into scope with `use rigless::mcu::Operate`.
pub trait Operate: Mcu {
    /// [`Mcu::reset`] as a part with nothing of its own to keep does it: the bus, every register
    /// and nothing scheduled, driven or waiting for an answer, and every model told through
    /// [`Device::reset`](crate::device::Device::reset).
    fn reset_every_model(&mut self) {
        self.bus_mut().reset();
        for slot in 0..self.bus().slots().len() {
            if let (_, Some(model)) = self.split(slot) {
                model.reset();
            }
        }
    }

    /// [`Mcu::poll`] as a part that asks every model does it.
    fn poll_every_model(&mut self, now: VirtualNanos) {
        for slot in 0..self.bus().slots().len() {
            let (bus, model) = self.split(slot);
            let Some(model) = model else {
                continue;
            };
            let (carried, mut context) = bus.call(now, slot);
            model.poll(carried.registers_mut(), &mut context);
        }
    }

    /// That every model is wired to a slot carrying the layout it was written for.
    ///
    /// The one mistake a hand-written dispatch can make is pointing a slot at the wrong field, and it
    /// is a mistake the type system cannot catch, because every model erases to the same trait object.
    /// This asks `split` itself what it hands over and compares that model's own layout to the slot's,
    /// so the answer comes from the dispatch under test rather than from a second table beside it.
    /// It also refuses a description that routes interrupts to an instance with no model, which
    /// would take every interrupt and give the core none.
    fn check(&mut self) -> Result<(), Error> {
        for index in 0..self.bus().slots().len() {
            let (bus, model) = self.split(index);
            let Some(model) = model else {
                continue;
            };
            let carried = bus.slots()[index].peripheral();
            if !std::ptr::eq(model.layout(), carried.registers) {
                return Err(Error::LayoutMismatch {
                    instance: carried.name,
                });
            }
        }
        // A router with no model would take every interrupt and give the core none.
        if let Some(router) = self.bus().router()
            && let (bus, None) = self.split(router)
        {
            return Err(Error::UnheardRouter {
                instance: bus.slots()[router].peripheral().name,
            });
        }
        Ok(())
    }

    /// The processor core this MCU carries.
    fn cpu(&self) -> Cpu {
        self.bus().cpu()
    }

    /// The instant of the earliest pending event, which is when the emulator next has to stop.
    fn next_event(&self) -> Option<VirtualNanos> {
        self.bus().next_event()
    }

    /// A read from the firmware of `width` bits at `address`, which may be part of a wider register.
    ///
    /// The model answering for that slot sees it first. What it doesn't answer, the register file
    /// does. In a [`Window`](crate::soc::Window), the chip in it answers. A window with no chip is
    /// unmapped.
    fn read(&mut self, at: VirtualNanos, address: u64, width: Width) -> Result<u64, Fault> {
        let located = self.bus().locate(address, width, AccessKind::Read)?;
        let (bus, model) = self.split(located.slot);
        let (slot, mut context) = bus.call(at, located.slot);
        if let Some(offset) = located.window {
            let chip = model.ok_or(Fault::Unmapped { address })?;
            return Ok(chip.read_window(offset, width, &mut context) & width.mask());
        }
        let answered =
            model.and_then(|model| model.read(located.row, slot.registers_mut(), &mut context));
        let value = answered.unwrap_or_else(|| slot.registers_mut().bus_read(located.row));
        Ok((value >> located.lane.shift) & width.mask())
    }

    /// What [`Operate::read`] would answer at `at`, with nothing changed and no model told, whatever
    /// the instance's gate says. That's a debugger's read. The model answers through
    /// [`Device::peek`](crate::device::Device::peek), and what it doesn't answer, the register file
    /// does. Advance the part to `at` first, as the runtime does before a debugger looks, since a
    /// peek doesn't catch up on what's due. It takes `&mut` only because [`Mcu::split`] does.
    fn peek(&mut self, at: VirtualNanos, address: u64, width: Width) -> Result<u64, Fault> {
        let located = self
            .bus()
            .locate_ungated(address, width, AccessKind::Read)?;
        let (bus, model) = self.split(located.slot);
        if let Some(offset) = located.window {
            let chip = model.ok_or(Fault::Unmapped { address })?;
            return chip
                .peek_window(offset, width, at)
                .map(|value| value & width.mask())
                .ok_or(Fault::Unmapped { address });
        }
        let registers = bus.slots()[located.slot].registers();
        let value = model
            .and_then(|model| model.peek(located.row, registers, at))
            .unwrap_or_else(|| registers.bus_peek(located.row));
        Ok((value >> located.lane.shift) & width.mask())
    }

    /// A write over the bus at `at`: the register file applies the rules, then the model sees what landed.
    fn write(
        &mut self,
        at: VirtualNanos,
        address: u64,
        width: Width,
        value: u64,
    ) -> Result<(), Fault> {
        let located = self.bus().locate(address, width, AccessKind::Write)?;
        let (bus, model) = self.split(located.slot);
        let (slot, mut context) = bus.call(at, located.slot);
        if let Some(offset) = located.window {
            let chip = model.ok_or(Fault::Unmapped { address })?;
            chip.write_window(offset, width, value & width.mask(), &mut context);
            return Ok(());
        }
        let register = &slot.peripheral().registers[located.row];
        // A write-only register stores nothing, so the lanes a narrow write leaves alone carry no action.
        let neutral = if register.access.is_readable() {
            let registers = slot.registers_mut();
            registers
                .write_rule(located.row)
                .neutral(registers.get_row(located.row))
        } else {
            0
        };
        let untouched = neutral & !(width.mask() << located.lane.shift);
        let written = untouched | ((value & width.mask()) << located.lane.shift);
        slot.registers_mut().bus_write(located.row, written);
        if let Some(model) = model {
            model.write(located.row, written, slot.registers_mut(), &mut context);
        }
        Ok(())
    }

    /// Fires every event due by `now`, earliest first, each to the model that scheduled it. An
    /// event scheduled meanwhile at `now` fires in the same pass.
    ///
    /// What the events asked for beyond their own registers is carried out by the next
    /// [`Operate::settle`], each at the instant of the event that asked. A caller stepping across
    /// several instants at once therefore settles them all after the last of them. A session steps
    /// to its next event, so for it one call is one instant.
    fn advance_to(&mut self, now: VirtualNanos) {
        // Each event runs at its own instant, not at the one being advanced to: a model that schedules a
        // second event from the first would otherwise anchor it to however far the caller happened to step.
        //
        // A model that asks for an instant already gone gets this one instead, and would then be called
        // again in this same pass, forever. That is a model bug rather than a state a run should reach, so
        // it is caught here where it can be named rather than left to hang.
        let mut fired_here = 0_u32;
        let mut last = None;
        while let Some((event, owner, at)) = self.bus_mut().pop_due(now) {
            if last == Some(at) {
                fired_here += 1;
                assert!(
                    fired_here <= SAME_INSTANT_LIMIT,
                    "{} scheduled {fired_here} events at {at:?} without advancing the clock",
                    self.bus().slots()[owner].peripheral().name
                );
            } else {
                last = Some(at);
                fired_here = 0;
            }
            let (bus, model) = self.split(owner);
            let (slot, mut context) = bus.call(at, owner);
            if let Some(model) = model {
                model.on_event(event, slot.registers_mut(), &mut context);
            }
        }
    }

    /// Carries out what the models asked for during an access or an event, until nothing is left
    /// or a model asks for a reset, and what the reset would discard is left undone.
    ///
    /// Five things reach this, and in this order. A clock one instance drives, which the instances
    /// the description runs on that output are told about. A request one instance drives, which
    /// every sink the description named is told about. An interrupt one instance sets, which the
    /// controller the description named to route them is told about, and which waits for
    /// [`Operate::drain_interrupts`] on a part with none. An answer to an access a model asked for,
    /// which goes back to the model that asked. And an access itself, which goes to a peripheral
    /// through [`Operate::read`] and [`Operate::write`] or to `memory` when it lies wholly inside one
    /// region. Each may produce more of any of them, so it repeats. A DMA controller moving a block
    /// between two memories does the whole block here.
    ///
    /// The order is what makes a request line mean what it means. An access a model makes may
    /// change a level, and a model handed its answer first would read the level as it stood before
    /// its own access. The hardware releases a request when whatever it asked reaches it, and that
    /// reader sees the release.
    ///
    /// Each effect happens at the instant of the access or the event that set it off, whatever instant
    /// the run has reached by the time it is served: a settle is the part reaching its next steady state
    /// and not time passing, so an event fired at one instant cannot have its consequences stamped with
    /// another's. An access the bus refuses is reported rather than answered, so a model waiting on one
    /// is told so and decides for itself what it means.
    ///
    /// # Panics
    ///
    /// Panics when the models have not run out of work after a bounded number of steps, which is a model
    /// asking for an access on every answer and never finishing. The bound is twice the largest transfer
    /// a part can legitimately ask for in one settle.
    fn settle(&mut self, memory: &mut dyn Memory) -> Result<Vec<Refused>, EmulatorError> {
        let mut refused = Vec::new();
        for _ in 0..SETTLE_LIMIT {
            if self.bus().reset_requested() {
                return Ok(refused);
            }
            if let Some((at, change)) = self.bus_mut().next_clock_change() {
                let readers: Vec<usize> = self.bus().readers_of(change).collect();
                for reader in readers {
                    let (bus, model) = self.split(reader);
                    let (slot, mut context) = bus.call(at, reader);
                    if let Some(model) = model {
                        model.on_clock(change.hz, slot.registers_mut(), &mut context);
                    }
                }
                continue;
            }
            if let Some((at, change)) = self.bus_mut().next_request_change() {
                for index in 0..self.bus().sinks().len() {
                    let sink = self.bus().sinks()[index];
                    let (bus, model) = self.split(sink);
                    let (slot, mut context) = bus.call(at, sink);
                    if let Some(model) = model {
                        model.on_request(change, slot.registers_mut(), &mut context);
                    }
                }
                continue;
            }
            if let Some(router) = self.bus().router()
                && let Some((at, change)) = self.bus_mut().next_interrupt_change()
            {
                let (bus, model) = self.split(router);
                let (slot, mut context) = bus.call(at, router);
                if let Some(model) = model {
                    model.on_interrupt(change, slot.registers_mut(), &mut context);
                }
                continue;
            }
            if let Some(answer) = self.bus_mut().next_answer() {
                let (bus, model) = self.split(answer.owner);
                let (slot, mut context) = bus.call(answer.at, answer.owner);
                if let Some(model) = model {
                    let registers = slot.registers_mut();
                    if let Some(value) = answer.found {
                        model.on_access(answer.token, value, registers, &mut context);
                    } else {
                        model.on_refused(answer.token, registers, &mut context);
                    }
                }
                continue;
            }
            let Some(access) = self.bus_mut().next_pending() else {
                return Ok(refused);
            };
            match perform(self, access, memory)? {
                Ok(value) => self.bus_mut().answer(&access, Some(value)),
                Err(fault) => {
                    refused.push(Refused {
                        by: self.bus().slots()[access.owner].peripheral().name,
                        address: access.address,
                        fault,
                    });
                    self.bus_mut().answer(&access, None);
                }
            }
        }
        panic!("the models took {SETTLE_LIMIT} steps without settling");
    }

    /// Takes the interrupt levels the models set since the last drain, in the order they set them.
    /// On a part whose description names an instance to route them, [`Operate::settle`] has handed
    /// that instance every one already, and this answers none.
    fn drain_interrupts(&mut self) -> Vec<InterruptChange> {
        self.bus_mut().drain_interrupts().collect()
    }

    /// Takes the levels the part's interrupt controller drove onto the core's lines since the last
    /// drain, in the order it drove them. A part with no controller drives none here, and the run
    /// drives the line of each interrupt's own number from [`Operate::drain_interrupts`].
    fn drain_lines(&mut self) -> Vec<LineChange> {
        self.bus_mut().drain_lines().collect()
    }

    /// Takes the request levels the models set since the last drain, in the order they set them.
    ///
    /// [`Operate::settle`] is what normally takes them, and gives each to every sink the description named. A
    /// test putting one model on a bus of its own has no sink, so this is how it reads what the model
    /// drove.
    fn drain_requests(&mut self) -> Vec<RequestChange> {
        self.bus_mut().drain_requests().collect()
    }

    /// Takes the clock rates the models drove since the last drain, in the order they drove them.
    /// It's what [`Operate::drain_requests`] is for a request, for a test reading what a clock tree
    /// drove.
    fn drain_clocks(&mut self) -> Vec<ClockChange> {
        self.bus_mut().drain_clocks().collect()
    }

    /// Takes the reset a model asked for during the last access or stop, if one did.
    fn take_reset_request(&mut self) -> Option<ResetCause> {
        self.bus_mut().take_reset_request()
    }

    /// Takes what the models told since the last drain, in the order they told it.
    fn drain_told(&mut self) -> Vec<Told> {
        self.bus_mut().drain_told().collect()
    }

    /// What one instance holds, for a test reading a register back.
    fn registers(&self, instance: &str) -> Option<&RegisterFile> {
        self.bus().registers(instance)
    }
}

impl<M: Mcu + ?Sized> Operate for M {}

/// One access a model asked for: memory where the whole access lies inside one region, and the
/// peripheral bus everywhere else. A write answers zero, which is what its model is told.
fn perform<M: Operate + ?Sized>(
    mcu: &mut M,
    access: PendingAccess,
    memory: &mut dyn Memory,
) -> Result<Result<u64, Fault>, EmulatorError> {
    let PendingAccess {
        at,
        kind,
        address,
        width,
        value,
        ..
    } = access;
    if mcu.bus().region_holding(address, width).is_some() {
        return match kind {
            AccessKind::Read => memory.read(address, width).map(Ok),
            AccessKind::Write => memory.write(address, width, value).map(|()| Ok(0)),
        };
    }
    Ok(match kind {
        AccessKind::Read => mcu.read(at, address, width),
        AccessKind::Write => mcu.write(at, address, width, value).map(|()| 0),
    })
}

/// One model on a bus of its own: what a test wants when it puts a model under the microscope.
///
/// It's an [`Mcu`] with exactly one field, so everything the runtime does to a whole part works on
/// it unchanged: serve a read, fire an event, drain an interrupt. The model is `single.model`, a
/// field, with `single.registers()` beside it.
#[derive(Debug)]
pub struct Single<D> {
    /// The model, reachable as a field like any other.
    pub model: D,
    bus: Bus,
    slot: usize,
}

impl<D: crate::device::Device + 'static> Single<D> {
    /// Puts `model` on `instance` of the bus `builder` describes, with every gate the description
    /// declared dropped, so that the one model answers alone. A part of your own builds its bus with
    /// [`crate::soc::Builder::build`] and keeps its gates.
    ///
    /// Fails when the bus has no such instance, or when that instance's layout is not the one the
    /// model was written for.
    pub fn new(
        builder: crate::soc::Builder,
        instance: &'static str,
        model: D,
    ) -> Result<Self, Error> {
        let bus = builder.ungated().build()?;
        let slot = bus
            .slot_of(instance)
            .ok_or(Error::UnknownInstance { instance })?;
        let mut single = Self { model, bus, slot };
        single.check()?;
        Ok(single)
    }

    /// What the instance holds, which is where a model keeps half its state.
    pub fn registers(&mut self) -> &mut RegisterFile {
        self.bus.slot_mut(self.slot).registers_mut()
    }

    /// The model and its registers together, which is what a boundary method takes.
    pub fn pair(&mut self) -> (&mut D, &mut RegisterFile) {
        let Self { model, bus, slot } = self;
        (model, bus.slot_mut(*slot).registers_mut())
    }

    /// Drives an input the bus does not carry at `at`: the model gets its registers and a context as
    /// on a bus access, so it may schedule and raise.
    pub fn drive<T>(
        &mut self,
        at: VirtualNanos,
        input: impl FnOnce(&mut D, &mut RegisterFile, &mut DeviceContext<'_>) -> T,
    ) -> T {
        let Self { model, bus, slot } = self;
        let (registers, mut context) = bus.drive(at, *slot);
        input(model, registers, &mut context)
    }
}

impl<D: crate::device::Device + 'static> Mcu for Single<D> {
    fn bus(&self) -> &Bus {
        &self.bus
    }

    fn split(&mut self, slot: usize) -> (&mut Bus, Option<&mut dyn ErasedDevice>) {
        let Self {
            model,
            bus,
            slot: mine,
        } = self;
        let answering: Option<&mut dyn ErasedDevice> = (slot == *mine).then_some(model);
        (bus, answering)
    }

    fn bus_mut(&mut self) -> &mut Bus {
        &mut self.bus
    }
    fn reset(&mut self, _at: VirtualNanos, _cause: ResetCause) {
        self.reset_every_model();
    }

    fn poll(&mut self, now: VirtualNanos) {
        self.poll_every_model(now);
    }
}

/// A bus with no models at all: every instance answers from its register file alone.
///
/// It is what "register-only" means, made a type. A part is this plus its models, and a test that
/// wants to see what the tables alone do wants this.
#[derive(Debug)]
pub struct Bare(Bus);

impl Bare {
    /// The bus `builder` describes, with nothing on it.
    pub fn new(builder: crate::soc::Builder) -> Result<Self, Error> {
        Ok(Self(builder.ungated().build()?))
    }
}

impl Mcu for Bare {
    fn bus(&self) -> &Bus {
        &self.0
    }

    fn split(&mut self, _slot: usize) -> (&mut Bus, Option<&mut dyn ErasedDevice>) {
        (&mut self.0, None)
    }

    fn bus_mut(&mut self) -> &mut Bus {
        &mut self.0
    }
    fn reset(&mut self, _at: VirtualNanos, _cause: ResetCause) {
        self.reset_every_model();
    }

    fn poll(&mut self, now: VirtualNanos) {
        self.poll_every_model(now);
    }
}

/// A part with a board's chip in one of its [`Window`]s.
///
/// `Wired` implements [`Mcu`], so a board holds it in place of the part. The part is `mcu.part`,
/// and the chip is `mcu.chip()` and `mcu.chip_mut()`, the same way a controller hands back a chip
/// it carries. The window gets a slot on the part's bus after all of the part's own slots, and
/// [`Mcu::split`] hands the chip out for that slot like any other model. That gives the chip the
/// window's time, events and interrupt lines. Accesses a model of the part makes in the window
/// reach it, and the window's gate refuses accesses the part hasn't enabled.
///
/// It forwards [`Mcu::reset`] and [`Mcu::poll`] to the part, and resets and polls the chip as well.
/// Everything [`Operate`] does runs through its own `split`, so the window is reachable. For two
/// chips, wrap one `Wired` in another.
#[derive(Debug)]
pub struct Wired<M, C> {
    /// The part.
    pub part: M,
    chip: Hung<C>,
    slot: usize,
}

impl<M: Mcu, C: parallel::Peer> Wired<M, C> {
    /// Puts `chip` in `window` of `part`.
    ///
    /// Fails like [`Bus::add_window`]: when the window overlaps a region, an instance or another
    /// window, or its gate names a bit the part doesn't have.
    pub fn new(mut part: M, window: Window, chip: C) -> Result<Self, Error> {
        let slot = part.bus_mut().add_window(window)?;
        Ok(Self {
            part,
            chip: Hung(chip),
            slot,
        })
    }

    /// The chip.
    pub fn chip(&self) -> &C {
        &self.chip.0
    }

    /// The chip, mutably, to set its inputs or read its state.
    pub fn chip_mut(&mut self) -> &mut C {
        &mut self.chip.0
    }
}

impl<M: Mcu, C: parallel::Peer> Mcu for Wired<M, C> {
    fn bus(&self) -> &Bus {
        self.part.bus()
    }

    fn bus_mut(&mut self) -> &mut Bus {
        self.part.bus_mut()
    }

    fn split(&mut self, slot: usize) -> (&mut Bus, Option<&mut dyn ErasedDevice>) {
        if slot == self.slot {
            return (self.part.bus_mut(), Some(&mut self.chip));
        }
        self.part.split(slot)
    }

    fn reset(&mut self, at: VirtualNanos, cause: ResetCause) {
        self.part.reset(at, cause);
        self.chip.0.reset();
    }

    fn poll(&mut self, now: VirtualNanos) {
        self.part.poll(now);
        let (_, mut context) = self.part.bus_mut().call(now, self.slot);
        self.chip.0.poll(&mut context);
    }
}

impl<M: Store, C: Store> Store for Wired<M, C> {
    fn store(&self, to: &mut Writer) -> Result<(), crate::snapshot::Error> {
        self.part.store(to)?;
        self.chip.0.store(to)
    }

    fn load(&mut self, from: &mut Reader) -> Result<(), crate::snapshot::Error> {
        self.part.load(from)?;
        self.chip.0.load(from)
    }
}

/// The model [`Mcu::split`] hands out for a window's slot.
#[derive(Debug)]
struct Hung<C>(C);

impl<C: parallel::Peer> ErasedDevice for Hung<C> {
    fn layout(&self) -> &'static [RegisterSpec] {
        &NO_REGISTERS
    }

    fn read(&mut self, _: usize, _: &mut RegisterFile, _: &mut DeviceContext<'_>) -> Option<u64> {
        None
    }

    fn write(&mut self, _: usize, _: u64, _: &mut RegisterFile, _: &mut DeviceContext<'_>) {}

    fn on_event(&mut self, event: EventId, _: &mut RegisterFile, context: &mut DeviceContext<'_>) {
        self.0.on_event(event, context);
    }

    fn on_request(&mut self, _: RequestChange, _: &mut RegisterFile, _: &mut DeviceContext<'_>) {}

    fn on_clock(&mut self, _: u64, _: &mut RegisterFile, _: &mut DeviceContext<'_>) {}

    fn poll(&mut self, _: &mut RegisterFile, context: &mut DeviceContext<'_>) {
        self.0.poll(context);
    }

    fn reset(&mut self) {
        self.0.reset();
    }

    fn on_access(&mut self, _: u64, _: u64, _: &mut RegisterFile, _: &mut DeviceContext<'_>) {}

    fn on_refused(&mut self, _: u64, _: &mut RegisterFile, _: &mut DeviceContext<'_>) {}

    fn read_window(&mut self, offset: u64, width: Width, context: &mut DeviceContext<'_>) -> u64 {
        self.0.read(offset, width, context)
    }

    fn write_window(
        &mut self,
        offset: u64,
        width: Width,
        value: u64,
        context: &mut DeviceContext<'_>,
    ) {
        self.0.write(offset, width, value, context);
    }

    fn peek_window(&self, offset: u64, width: Width, now: VirtualNanos) -> Option<u64> {
        self.0.peek(offset, width, now)
    }
}