rch-common 2.1.3

//! Error Catalog for Remote Compilation Helper
//!
//! This module defines a comprehensive error catalog with unique error codes,
//! categorized by subsystem. Each error includes:
//! - A unique code (RCH-E001 through RCH-E999)
//! - A human-readable message template
//! - Remediation steps
//! - Documentation links where applicable
//!
//! # Error Code Ranges
//!
//! | Range      | Category    | Description                          |
//! |------------|-------------|--------------------------------------|
//! | E001-E099  | Config      | Configuration and setup errors       |
//! | E100-E199  | Network     | Network and SSH connectivity         |
//! | E200-E299  | Worker      | Worker selection and management      |
//! | E300-E399  | Build       | Compilation and build errors         |
//! | E400-E499  | Transfer    | File transfer and sync errors        |
//! | E500-E599  | Internal    | Internal/unexpected errors           |
//!
//! ## Extended Sub-Ranges (within existing categories)
//!
//! | Range      | Subcategory        | Description                           |
//! |------------|--------------------|---------------------------------------|
//! | E013-E018  | Config/PathDeps    | Path-dependency resolution errors     |
//! | E019-E024  | Config/Closure     | Dependency-closure planner errors     |
//! | E210-E219  | Worker/Storage     | Disk pressure and storage errors      |
//! | E310-E319  | Build/Triage       | Process triage integration errors     |
//! | E320-E325  | Build/Cancellation | Build cancellation lifecycle errors   |
//! | E410-E414  | Transfer/Preflight | Remote dependency preflight errors    |
//!
//! # Example
//!
//! ```rust
//! use rch_common::errors::catalog::{ErrorCode, ErrorEntry};
//!
//! let error = ErrorCode::ConfigNotFound;
//! let entry = error.entry();
//!
//! println!("Error {}: {}", entry.code, entry.message);
//! for step in entry.remediation {
//!     println!("  - {}", step);
//! }
//! ```

use serde::{Deserialize, Serialize};
use std::fmt;

/// Error code enumeration covering all RCH error scenarios.
///
/// Each variant maps to a unique error code in the RCH-Exxx format.
#[derive(Debug, Clone, Copy, PartialEq, Eq, Hash, Serialize, Deserialize)]
#[serde(rename_all = "SCREAMING_SNAKE_CASE")]
#[non_exhaustive]
pub enum ErrorCode {
    // =========================================================================
    // Config Errors (E001-E099)
    // =========================================================================
    /// Configuration file not found
    ConfigNotFound,
    /// Configuration file could not be read
    ConfigReadError,
    /// Configuration file contains invalid TOML syntax
    ConfigParseError,
    /// Configuration contains invalid values
    ConfigValidationError,
    /// Environment variable has invalid value
    ConfigEnvError,
    /// Profile not found in configuration
    ConfigProfileNotFound,
    /// No workers configured
    ConfigNoWorkers,
    /// Worker configuration is invalid
    ConfigInvalidWorker,
    /// SSH key path is invalid or inaccessible
    ConfigSshKeyError,
    /// Socket path is invalid
    ConfigSocketPathError,

    // -- Path-Dependency Resolution (E013-E018) --
    /// Cargo manifest parse failure during path-dependency resolution
    PathDepManifestParseFailed,
    /// Path dependency declared but target directory not found
    PathDepMissing,
    /// Cyclic path dependency detected
    PathDepCyclic,
    /// Path dependency violates canonical-root policy
    PathDepPolicyViolation,
    /// cargo metadata invocation failed
    PathDepMetadataFailed,
    /// cargo metadata output could not be parsed
    PathDepMetadataParseFailed,

    // -- Dependency-Closure Planner (E019-E024) --
    /// Dependency closure plan computation failed
    ClosurePlanFailed,
    /// Closure entered fail-open state (unverifiable dependency data)
    ClosureFailOpen,
    /// High-risk path dependencies in closure
    ClosureHighRisk,
    /// Required closure data is missing or incomplete
    ClosureMissingData,
    /// Closure sync action ordering is non-deterministic
    ClosureNonDeterministic,
    /// Closure manifest fingerprint mismatch
    ClosureFingerprintMismatch,

    // =========================================================================
    // Network Errors (E100-E199)
    // =========================================================================
    /// SSH connection failed
    SshConnectionFailed,
    /// SSH authentication failed
    SshAuthFailed,
    /// SSH key not found or invalid format
    SshKeyError,
    /// SSH known hosts verification failed
    SshHostKeyError,
    /// SSH command execution timed out
    SshTimeout,
    /// SSH session terminated unexpectedly
    SshSessionDropped,
    /// DNS resolution failed for worker host
    NetworkDnsError,
    /// Network unreachable
    NetworkUnreachable,
    /// Connection refused by remote host
    NetworkConnectionRefused,
    /// TCP connection timed out
    NetworkTimeout,

    // =========================================================================
    // Worker Errors (E200-E299)
    // =========================================================================
    /// No workers available for selection
    WorkerNoneAvailable,
    /// All workers are unhealthy
    WorkerAllUnhealthy,
    /// Worker failed health check
    WorkerHealthCheckFailed,
    /// Worker self-test failed
    WorkerSelfTestFailed,
    /// Worker is at capacity
    WorkerAtCapacity,
    /// Worker missing required toolchain
    WorkerMissingToolchain,
    /// Worker state is inconsistent
    WorkerStateError,
    /// Worker circuit breaker is open
    WorkerCircuitOpen,
    /// Worker selection strategy failed
    WorkerSelectionFailed,
    /// Worker load query failed
    WorkerLoadQueryFailed,

    // -- Disk Pressure / Storage (E210-E219) --
    /// Worker disk usage is critically high
    WorkerDiskPressureCritical,
    /// Worker disk usage is elevated (warning threshold)
    WorkerDiskPressureWarning,
    /// Worker disk pressure telemetry is stale or missing
    WorkerTelemetryGap,
    /// Worker disk I/O utilization is too high for scheduling
    WorkerDiskIoHigh,
    /// Worker memory pressure exceeds scheduling threshold
    WorkerMemoryPressureHigh,
    /// Disk reclaim/ballast eviction failed on worker
    WorkerReclaimFailed,
    /// Disk headroom estimation too low for build reservation
    WorkerDiskHeadroomInsufficient,
    /// Active build protection prevented reclaim operation
    WorkerReclaimProtected,

    // =========================================================================
    // Build Errors (E300-E399)
    // =========================================================================
    /// Remote compilation failed
    BuildCompilationFailed,
    /// Build command not recognized
    BuildUnknownCommand,
    /// Build process was killed by signal
    BuildKilledBySignal,
    /// Build timed out
    BuildTimeout,
    /// Build output capture failed
    BuildOutputError,
    /// Remote working directory error
    BuildWorkdirError,
    /// Toolchain wrapper failed
    BuildToolchainError,
    /// Build environment setup failed
    BuildEnvError,
    /// Incremental build state corrupted
    BuildIncrementalError,
    /// Build artifact not found
    BuildArtifactMissing,
    /// Remote build succeeded but the artifact sync-back matched zero build
    /// outputs — local artifacts may be STALE (bd-mpbav)
    BuildArtifactSyncEmpty,
    /// Remote build succeeded but returned executables for a different target
    /// triple than the requesting host expects (GitHub #65)
    BuildArtifactForeignTarget,
    /// Cargo workspace inheritance failed under remote topology
    BuildCargoWorkspaceInheritance,

    // -- Process Triage (E310-E319) --
    /// Process triage adapter binary unavailable or not installed
    ProcessTriageAdapterUnavailable,
    /// Process detector could not classify process with sufficient confidence
    ProcessTriageDetectorUncertain,
    /// Process triage action violates safe-action policy
    ProcessTriagePolicyViolation,
    /// Transport error communicating with process triage adapter
    ProcessTriageTransportError,
    /// Process triage executor encountered a runtime error
    ProcessTriageExecutorError,
    /// Process triage operation timed out
    ProcessTriageTimeout,
    /// Process triage returned partial or incomplete results
    ProcessTriagePartialResult,
    /// Invalid process triage request (malformed input)
    ProcessTriageInvalidRequest,

    // -- Cancellation (E320-E325) --
    /// Graceful cancel signal dispatched
    CancelGracefulSent,
    /// Escalated to forced kill after timeout
    CancelEscalatedKill,
    /// Failed to kill remote process via SSH
    CancelRemoteKillFailed,
    /// Post-cancel cleanup encountered errors
    CancelCleanupFailed,
    /// Slots not properly released after cancel
    CancelSlotLeak,
    /// Cancellation exceeded policy time budget
    CancelTimeoutExceeded,

    // =========================================================================
    // Transfer Errors (E400-E499)
    // =========================================================================
    /// Rsync transfer failed
    TransferRsyncFailed,
    /// File sync timed out
    TransferTimeout,
    /// Source files not found
    TransferSourceMissing,
    /// Destination path error
    TransferDestError,
    /// Insufficient disk space on worker
    TransferDiskFull,
    /// Permission denied during transfer
    TransferPermissionDenied,
    /// Transfer checksum mismatch
    TransferChecksumError,
    /// Binary download failed
    TransferBinaryFailed,
    /// Partial transfer detected
    TransferIncomplete,
    /// Transfer protocol error
    TransferProtocolError,
    /// Required dependency path missing on remote worker after sync
    DependencyPreflightMissing,
    /// Dependency root was not refreshed before preflight
    DependencyPreflightStale,
    /// Dependency preflight could not determine remote state
    DependencyPreflightUnknown,
    /// Dependency topology policy blocked remote execution
    DependencyPreflightPolicyViolation,
    /// Dependency preflight planning timed out
    DependencyPreflightTimeout,

    // =========================================================================
    // Internal Errors (E500-E599)
    // =========================================================================
    /// Daemon socket connection failed
    InternalDaemonSocket,
    /// Daemon protocol error
    InternalDaemonProtocol,
    /// Daemon not running
    InternalDaemonNotRunning,
    /// Inter-process communication error
    InternalIpcError,
    /// Unexpected internal state
    InternalStateError,
    /// Serialization/deserialization error
    InternalSerdeError,
    /// Hook execution failed
    InternalHookError,
    /// Metrics collection error
    InternalMetricsError,
    /// Logging system error
    InternalLoggingError,
    /// Update check failed
    InternalUpdateError,
}

impl ErrorCode {
    /// Returns the numeric error code (without prefix).
    #[must_use]
    pub const fn code_number(&self) -> u16 {
        match self {
            // Config (001-099)
            Self::ConfigNotFound => 1,
            Self::ConfigReadError => 2,
            Self::ConfigParseError => 3,
            Self::ConfigValidationError => 4,
            Self::ConfigEnvError => 5,
            Self::ConfigProfileNotFound => 6,
            Self::ConfigNoWorkers => 7,
            Self::ConfigInvalidWorker => 8,
            Self::ConfigSshKeyError => 9,
            Self::ConfigSocketPathError => 10,

            // Path-Dependency (013-018)
            Self::PathDepManifestParseFailed => 13,
            Self::PathDepMissing => 14,
            Self::PathDepCyclic => 15,
            Self::PathDepPolicyViolation => 16,
            Self::PathDepMetadataFailed => 17,
            Self::PathDepMetadataParseFailed => 18,

            // Dependency-Closure (019-024)
            Self::ClosurePlanFailed => 19,
            Self::ClosureFailOpen => 20,
            Self::ClosureHighRisk => 21,
            Self::ClosureMissingData => 22,
            Self::ClosureNonDeterministic => 23,
            Self::ClosureFingerprintMismatch => 24,

            // Network (100-199)
            Self::SshConnectionFailed => 100,
            Self::SshAuthFailed => 101,
            Self::SshKeyError => 102,
            Self::SshHostKeyError => 103,
            Self::SshTimeout => 104,
            Self::SshSessionDropped => 105,
            Self::NetworkDnsError => 106,
            Self::NetworkUnreachable => 107,
            Self::NetworkConnectionRefused => 108,
            Self::NetworkTimeout => 109,

            // Worker (200-299)
            Self::WorkerNoneAvailable => 200,
            Self::WorkerAllUnhealthy => 201,
            Self::WorkerHealthCheckFailed => 202,
            Self::WorkerSelfTestFailed => 203,
            Self::WorkerAtCapacity => 204,
            Self::WorkerMissingToolchain => 205,
            Self::WorkerStateError => 206,
            Self::WorkerCircuitOpen => 207,
            Self::WorkerSelectionFailed => 208,
            Self::WorkerLoadQueryFailed => 209,

            // Disk Pressure / Storage (210-219)
            Self::WorkerDiskPressureCritical => 210,
            Self::WorkerDiskPressureWarning => 211,
            Self::WorkerTelemetryGap => 212,
            Self::WorkerDiskIoHigh => 213,
            Self::WorkerMemoryPressureHigh => 214,
            Self::WorkerReclaimFailed => 215,
            Self::WorkerDiskHeadroomInsufficient => 216,
            Self::WorkerReclaimProtected => 217,

            // Build (300-399)
            Self::BuildCompilationFailed => 300,
            Self::BuildUnknownCommand => 301,
            Self::BuildKilledBySignal => 302,
            Self::BuildTimeout => 303,
            Self::BuildOutputError => 304,
            Self::BuildWorkdirError => 305,
            Self::BuildToolchainError => 306,
            Self::BuildEnvError => 307,
            Self::BuildIncrementalError => 308,
            Self::BuildArtifactMissing => 309,
            // 326 (past the cancellation block E320-E325): codes occupy free
            // slots of the E300-E399 range, not contiguous positions.
            Self::BuildArtifactSyncEmpty => 326,
            Self::BuildArtifactForeignTarget => 327,
            Self::BuildCargoWorkspaceInheritance => 329,

            // Process Triage (310-319)
            Self::ProcessTriageAdapterUnavailable => 310,
            Self::ProcessTriageDetectorUncertain => 311,
            Self::ProcessTriagePolicyViolation => 312,
            Self::ProcessTriageTransportError => 313,
            Self::ProcessTriageExecutorError => 314,
            Self::ProcessTriageTimeout => 315,
            Self::ProcessTriagePartialResult => 316,
            Self::ProcessTriageInvalidRequest => 317,

            // Cancellation (320-325)
            Self::CancelGracefulSent => 320,
            Self::CancelEscalatedKill => 321,
            Self::CancelRemoteKillFailed => 322,
            Self::CancelCleanupFailed => 323,
            Self::CancelSlotLeak => 324,
            Self::CancelTimeoutExceeded => 325,

            // Transfer (400-499)
            Self::TransferRsyncFailed => 400,
            Self::TransferTimeout => 401,
            Self::TransferSourceMissing => 402,
            Self::TransferDestError => 403,
            Self::TransferDiskFull => 404,
            Self::TransferPermissionDenied => 405,
            Self::TransferChecksumError => 406,
            Self::TransferBinaryFailed => 407,
            Self::TransferIncomplete => 408,
            Self::TransferProtocolError => 409,
            Self::DependencyPreflightMissing => 410,
            Self::DependencyPreflightStale => 411,
            Self::DependencyPreflightUnknown => 412,
            Self::DependencyPreflightPolicyViolation => 413,
            Self::DependencyPreflightTimeout => 414,

            // Internal (500-599)
            Self::InternalDaemonSocket => 500,
            Self::InternalDaemonProtocol => 501,
            Self::InternalDaemonNotRunning => 502,
            Self::InternalIpcError => 503,
            Self::InternalStateError => 504,
            Self::InternalSerdeError => 505,
            Self::InternalHookError => 506,
            Self::InternalMetricsError => 507,
            Self::InternalLoggingError => 508,
            Self::InternalUpdateError => 509,
        }
    }

    /// Returns the formatted error code string (e.g., "RCH-E001").
    #[must_use]
    pub fn code_string(&self) -> String {
        format!("RCH-E{:03}", self.code_number())
    }

    /// Returns the error category.
    #[must_use]
    pub const fn category(&self) -> ErrorCategory {
        match self.code_number() {
            1..=99 => ErrorCategory::Config,
            100..=199 => ErrorCategory::Network,
            200..=299 => ErrorCategory::Worker,
            300..=399 => ErrorCategory::Build,
            400..=499 => ErrorCategory::Transfer,
            500..=599 => ErrorCategory::Internal,
            _ => ErrorCategory::Internal,
        }
    }

    /// Returns the full error entry with all metadata.
    #[must_use]
    pub fn entry(&self) -> ErrorEntry {
        ErrorEntry {
            code: self.code_string(),
            category: self.category(),
            message: self.message().to_string(),
            remediation: self
                .remediation()
                .iter()
                .map(|s| (*s).to_string())
                .collect(),
            doc_url: self.doc_url().map(String::from),
        }
    }

    /// Returns the error message template.
    #[must_use]
    pub const fn message(&self) -> &'static str {
        match self {
            // Config
            Self::ConfigNotFound => "Configuration file not found",
            Self::ConfigReadError => "Failed to read configuration file",
            Self::ConfigParseError => "Configuration file contains invalid TOML syntax",
            Self::ConfigValidationError => "Configuration contains invalid values",
            Self::ConfigEnvError => "Environment variable has invalid value",
            Self::ConfigProfileNotFound => "Profile not found in configuration",
            Self::ConfigNoWorkers => "No workers are configured",
            Self::ConfigInvalidWorker => "Worker configuration is invalid",
            Self::ConfigSshKeyError => "SSH key path is invalid or inaccessible",
            Self::ConfigSocketPathError => "Socket path is invalid or inaccessible",

            // Path-Dependency
            Self::PathDepManifestParseFailed => {
                "Cargo manifest parse failure during path-dependency resolution"
            }
            Self::PathDepMissing => "Path dependency declared but target directory not found",
            Self::PathDepCyclic => "Cyclic path dependency detected in dependency graph",
            Self::PathDepPolicyViolation => {
                "Path dependency violates canonical-root topology policy"
            }
            Self::PathDepMetadataFailed => "cargo metadata invocation failed",
            Self::PathDepMetadataParseFailed => "cargo metadata output could not be parsed",

            // Dependency-Closure
            Self::ClosurePlanFailed => "Dependency closure plan computation failed",
            Self::ClosureFailOpen => {
                "Dependency closure entered fail-open state due to unverifiable data"
            }
            Self::ClosureHighRisk => "High-risk path dependencies detected in closure plan",
            Self::ClosureMissingData => "Required dependency closure data is missing or incomplete",
            Self::ClosureNonDeterministic => "Closure sync action ordering is non-deterministic",
            Self::ClosureFingerprintMismatch => "Closure manifest fingerprint mismatch detected",

            // Network
            Self::SshConnectionFailed => "SSH connection to worker failed",
            Self::SshAuthFailed => "SSH authentication failed",
            Self::SshKeyError => "SSH key not found or has invalid format",
            Self::SshHostKeyError => "SSH host key verification failed",
            Self::SshTimeout => "SSH command execution timed out",
            Self::SshSessionDropped => "SSH session terminated unexpectedly",
            Self::NetworkDnsError => "DNS resolution failed for worker host",
            Self::NetworkUnreachable => "Network is unreachable",
            Self::NetworkConnectionRefused => "Connection refused by remote host",
            Self::NetworkTimeout => "TCP connection timed out",

            // Worker
            Self::WorkerNoneAvailable => "No workers available for selection",
            Self::WorkerAllUnhealthy => "All configured workers are unhealthy",
            Self::WorkerHealthCheckFailed => "Worker failed health check",
            Self::WorkerSelfTestFailed => "Worker self-test failed",
            Self::WorkerAtCapacity => "Worker is at maximum capacity",
            Self::WorkerMissingToolchain => "Worker is missing required toolchain",
            Self::WorkerStateError => "Worker state is inconsistent",
            Self::WorkerCircuitOpen => "Worker circuit breaker is open",
            Self::WorkerSelectionFailed => "Worker selection strategy failed",
            Self::WorkerLoadQueryFailed => "Failed to query worker load",

            // Disk Pressure / Storage
            Self::WorkerDiskPressureCritical => "Worker disk usage is critically high",
            Self::WorkerDiskPressureWarning => "Worker disk usage has exceeded warning threshold",
            Self::WorkerTelemetryGap => "Worker disk pressure telemetry is stale or missing",
            Self::WorkerDiskIoHigh => "Worker disk I/O utilization is too high for scheduling",
            Self::WorkerMemoryPressureHigh => "Worker memory pressure exceeds scheduling threshold",
            Self::WorkerReclaimFailed => "Disk reclaim operation failed on worker",
            Self::WorkerDiskHeadroomInsufficient => {
                "Insufficient disk headroom for build reservation"
            }
            Self::WorkerReclaimProtected => "Active build protection prevented reclaim operation",

            // Build
            Self::BuildCompilationFailed => "Remote compilation failed",
            Self::BuildUnknownCommand => "Build command not recognized",
            Self::BuildKilledBySignal => "Build process was killed by signal",
            Self::BuildTimeout => "Build operation timed out",
            Self::BuildOutputError => "Failed to capture build output",
            Self::BuildWorkdirError => "Remote working directory error",
            Self::BuildToolchainError => "Toolchain wrapper failed",
            Self::BuildEnvError => "Build environment setup failed",
            Self::BuildIncrementalError => "Incremental build state is corrupted",
            Self::BuildArtifactMissing => "Build artifact not found",
            Self::BuildArtifactSyncEmpty => {
                "Remote build succeeded but no build outputs were synced back"
            }
            Self::BuildArtifactForeignTarget => {
                "Retrieved build artifacts target a different platform than this host"
            }
            Self::BuildCargoWorkspaceInheritance => {
                "Cargo workspace inheritance failed under remote topology"
            }

            // Process Triage
            Self::ProcessTriageAdapterUnavailable => {
                "Process triage adapter is unavailable or not installed"
            }
            Self::ProcessTriageDetectorUncertain => {
                "Process detector could not classify with sufficient confidence"
            }
            Self::ProcessTriagePolicyViolation => {
                "Process triage action violates safe-action policy"
            }
            Self::ProcessTriageTransportError => {
                "Transport error communicating with process triage adapter"
            }
            Self::ProcessTriageExecutorError => {
                "Process triage executor encountered a runtime error"
            }
            Self::ProcessTriageTimeout => "Process triage operation timed out",
            Self::ProcessTriagePartialResult => {
                "Process triage returned partial or incomplete results"
            }
            Self::ProcessTriageInvalidRequest => "Invalid process triage request",

            // Cancellation
            Self::CancelGracefulSent => "Graceful cancel signal dispatched",
            Self::CancelEscalatedKill => "Escalated to forced kill after timeout",
            Self::CancelRemoteKillFailed => "Failed to kill remote process via SSH",
            Self::CancelCleanupFailed => "Post-cancel cleanup encountered errors",
            Self::CancelSlotLeak => "Slots not properly released after cancel",
            Self::CancelTimeoutExceeded => "Cancellation exceeded policy time budget",

            // Transfer
            Self::TransferRsyncFailed => "Rsync transfer failed",
            Self::TransferTimeout => "File sync operation timed out",
            Self::TransferSourceMissing => "Source files not found",
            Self::TransferDestError => "Destination path error",
            Self::TransferDiskFull => "Insufficient disk space on worker",
            Self::TransferPermissionDenied => "Permission denied during file transfer",
            Self::TransferChecksumError => "Transfer checksum mismatch",
            Self::TransferBinaryFailed => "Binary download failed",
            Self::TransferIncomplete => "Transfer completed partially",
            Self::TransferProtocolError => "Transfer protocol error",
            Self::DependencyPreflightMissing => {
                "Remote dependency preflight found a missing required path"
            }
            Self::DependencyPreflightStale => {
                "Remote dependency preflight found a stale dependency root"
            }
            Self::DependencyPreflightUnknown => {
                "Remote dependency preflight could not verify dependency state"
            }
            Self::DependencyPreflightPolicyViolation => {
                "Remote dependency preflight blocked a topology policy violation"
            }
            Self::DependencyPreflightTimeout => "Remote dependency preflight planning timed out",

            // Internal
            Self::InternalDaemonSocket => "Failed to connect to daemon socket",
            Self::InternalDaemonProtocol => "Daemon protocol error",
            Self::InternalDaemonNotRunning => "RCH daemon is not running",
            Self::InternalIpcError => "Inter-process communication error",
            Self::InternalStateError => "Unexpected internal state",
            Self::InternalSerdeError => "Serialization/deserialization error",
            Self::InternalHookError => "Hook execution failed",
            Self::InternalMetricsError => "Metrics collection error",
            Self::InternalLoggingError => "Logging system error",
            Self::InternalUpdateError => "Update check failed",
        }
    }

    /// Returns remediation steps for this error.
    #[must_use]
    pub const fn remediation(&self) -> &'static [&'static str] {
        match self {
            // Config
            Self::ConfigNotFound => &[
                "Run 'rch init' to create a default configuration",
                "Check if ~/.config/rch/config.toml exists",
                "Set RCH_CONFIG_DIR environment variable to specify custom config directory",
            ],
            Self::ConfigReadError => &[
                "Check file permissions on the configuration file",
                "Verify the file is not corrupted",
                "Ensure no other process has locked the file",
            ],
            Self::ConfigParseError => &[
                "Run 'rch config validate' to identify syntax errors",
                "Check TOML syntax at the indicated line",
                "Ensure all strings are properly quoted",
            ],
            Self::ConfigValidationError => &[
                "Run 'rch config validate' for detailed diagnostics",
                "Check that all required fields are present",
                "Verify values are within allowed ranges",
            ],
            Self::ConfigEnvError => &[
                "Check the environment variable value format",
                "Unset the variable to use config file defaults",
                "See 'rch help env' for valid environment variables",
            ],
            Self::ConfigProfileNotFound => &[
                "List available profiles with 'rch config profiles'",
                "Create the profile in your configuration file",
                "Check for typos in the profile name",
            ],
            Self::ConfigNoWorkers => &[
                "Add at least one worker to your configuration",
                "Run 'rch discover' to find available workers",
                "Check the [workers] section in your config",
            ],
            Self::ConfigInvalidWorker => &[
                "Verify worker hostname is correct",
                "Check SSH username and key configuration",
                "Ensure remote_base_dir is a valid path",
            ],
            Self::ConfigSshKeyError => &[
                "Check that the SSH key file exists",
                "Verify file permissions (should be 600)",
                "Ensure the key format is valid (ssh-keygen -y -f KEY)",
            ],
            Self::ConfigSocketPathError => &[
                "Check directory permissions for socket path",
                "Ensure parent directory exists",
                "Try using the default socket path",
            ],

            // Path-Dependency
            Self::PathDepManifestParseFailed => &[
                "Check Cargo.toml syntax with 'cargo verify-project'",
                "Ensure all path-dependency Cargo.toml files are valid TOML",
                "Run 'cargo metadata' manually to see detailed parse errors",
            ],
            Self::PathDepMissing => &[
                "Verify the path in Cargo.toml [dependencies] exists on disk",
                "Check for typos in the dependency path value",
                "Ensure all workspace members are checked out",
            ],
            Self::PathDepCyclic => &[
                "Review the path dependency graph for cycles",
                "Run 'cargo metadata' to visualize the dependency tree",
                "Break the cycle by restructuring crate boundaries",
            ],
            Self::PathDepPolicyViolation => &[
                "Ensure all path dependencies are under the configured canonical root (path_topology.canonical_root, default /data/projects)",
                "Check that paths resolve within allowed topology prefixes",
                "Review the PathTopologyPolicy configuration",
            ],
            Self::PathDepMetadataFailed => &[
                "Verify 'cargo' is installed and on PATH",
                "Check that Cargo.toml is a valid project manifest",
                "Try running 'cargo metadata --format-version=1' manually",
            ],
            Self::PathDepMetadataParseFailed => &[
                "Run 'cargo metadata --format-version=1' and check JSON output",
                "Ensure cargo version is recent enough for the workspace layout",
                "Check for toolchain incompatibilities with rust-toolchain.toml",
            ],

            // Dependency-Closure
            Self::ClosurePlanFailed => &[
                "Check that all path dependencies are resolvable",
                "Run 'cargo metadata' to verify dependency graph health",
                "Review dependency closure planner logs for specific failures",
            ],
            Self::ClosureFailOpen => &[
                "The transfer will proceed with project root only (fail-open semantics)",
                "Check path dependency graph health to restore full closure",
                "Review the fail-open reason in structured diagnostics output",
            ],
            Self::ClosureHighRisk => &[
                "Review the high-risk dependencies flagged in the plan",
                "Ensure all dependency paths are canonical and stable",
                "Consider pinning dependency versions to reduce risk",
            ],
            Self::ClosureMissingData => &[
                "Ensure Cargo.toml and Cargo.lock are present and valid",
                "Check that all workspace members are accessible",
                "Run 'cargo update' to regenerate lock file if needed",
            ],
            Self::ClosureNonDeterministic => &[
                "Report this as a bug — closure ordering must be deterministic",
                "Check for filesystem race conditions or concurrent modifications",
                "Retry the operation to see if the ordering stabilizes",
            ],
            Self::ClosureFingerprintMismatch => &[
                "A dependency manifest changed since the plan was computed",
                "Recompute the closure plan to pick up the latest manifests",
                "Check for concurrent modifications to Cargo.toml files",
            ],

            // Network
            Self::SshConnectionFailed => &[
                "Verify the worker host is reachable: ping <host>",
                "Check that SSH service is running on the worker",
                "Verify firewall allows SSH (port 22)",
                "Try connecting manually: ssh <user>@<host>",
            ],
            Self::SshAuthFailed => &[
                "Verify SSH key is in authorized_keys on the worker",
                "Check SSH key passphrase if applicable",
                "Ensure ssh-agent is running with key loaded",
                "Try: ssh-add -l to list loaded keys",
            ],
            Self::SshKeyError => &[
                "Check that the SSH key file exists at the configured path",
                "Verify key file permissions are 600",
                "Regenerate key if format is corrupted",
            ],
            Self::SshHostKeyError => &[
                "Accept the host key: ssh <user>@<host> (confirm fingerprint)",
                "Check known_hosts for conflicting entries",
                "Update known_hosts_policy in config if appropriate",
            ],
            Self::SshTimeout => &[
                "Check network connectivity to the worker",
                "Increase timeout in configuration",
                "Verify worker is not overloaded",
            ],
            Self::SshSessionDropped => &[
                "Check network stability",
                "Verify worker has not rebooted",
                "Look for keepalive settings in SSH config",
            ],
            Self::NetworkDnsError => &[
                "Verify worker hostname is correct",
                "Check DNS server configuration",
                "Try using IP address instead of hostname",
            ],
            Self::NetworkUnreachable => &[
                "Check network connection on local machine",
                "Verify VPN connection if required",
                "Check routing to worker network",
            ],
            Self::NetworkConnectionRefused => &[
                "Verify SSH service is running on worker",
                "Check if worker firewall allows connections",
                "Ensure correct port is being used",
            ],
            Self::NetworkTimeout => &[
                "Check network latency to worker",
                "Verify worker is responsive",
                "Increase connection timeout in config",
            ],

            // Worker
            Self::WorkerNoneAvailable => &[
                "Configure at least one worker in config.toml",
                "Run 'rch discover' to find available workers",
                "Check that configured workers are enabled",
            ],
            Self::WorkerAllUnhealthy => &[
                "Run 'rch doctor' to diagnose worker issues",
                "Check individual worker connectivity",
                "Review worker health check logs",
            ],
            Self::WorkerHealthCheckFailed => &[
                "Verify SSH connectivity to worker",
                "Check worker disk space and load",
                "Review health check timeout settings",
            ],
            Self::WorkerSelfTestFailed => &[
                "Run 'rch self-test --worker <name>' for details",
                "Verify Rust toolchain on worker",
                "Check worker has required dependencies",
            ],
            Self::WorkerAtCapacity => &[
                "Wait for current builds to complete",
                "Add more workers to distribute load",
                "Increase max_concurrent_builds on worker",
            ],
            Self::WorkerMissingToolchain => &[
                "Install required toolchain on worker",
                "Run 'rustup show' on worker to verify",
                "Update worker toolchain configuration",
            ],
            Self::WorkerStateError => &[
                "Restart the RCH daemon: rchd restart",
                "Check for stale lock files",
                "Review daemon logs for details",
            ],
            Self::WorkerCircuitOpen => &[
                "Wait for circuit breaker reset period",
                "Check worker health manually",
                "Review recent build failures on worker",
            ],
            Self::WorkerSelectionFailed => &[
                "Verify at least one worker is healthy",
                "Check selection strategy configuration",
                "Review worker weights and priorities",
            ],
            Self::WorkerLoadQueryFailed => &[
                "Verify SSH connectivity to worker",
                "Check that load query command works on worker",
                "Review timeout settings for load queries",
            ],

            // Disk Pressure / Storage
            Self::WorkerDiskPressureCritical => &[
                "Worker disk usage is above 95% — builds will not be scheduled here",
                "Clean up old build caches: rch cache clean --worker <id>",
                "Check disk usage on worker: ssh <worker> df -h",
            ],
            Self::WorkerDiskPressureWarning => &[
                "Worker disk usage is above 80% — scheduling priority reduced",
                "Consider cleaning old caches: rch cache clean --worker <id>",
                "Monitor disk usage trend to prevent critical state",
            ],
            Self::WorkerTelemetryGap => &[
                "Worker disk telemetry is stale — pressure assessment is unreliable",
                "Check worker health: rch workers probe <id>",
                "Verify telemetry collection is running on the worker",
            ],
            Self::WorkerDiskIoHigh => &[
                "Worker disk I/O is saturated — builds may experience latency",
                "Wait for current I/O-heavy operations to complete",
                "Check for stuck or runaway processes: rch workers probe <id>",
            ],
            Self::WorkerMemoryPressureHigh => &[
                "Worker memory pressure is high — scheduling priority reduced",
                "Check for memory leaks or over-committed builds on the worker",
                "Review worker slot count to prevent over-scheduling",
            ],
            Self::WorkerReclaimFailed => &[
                "Disk space reclaim operation failed on the worker",
                "Check worker filesystem health and permissions",
                "Inspect both root and temp usage: ssh <worker> 'df -h / /tmp'",
            ],
            Self::WorkerDiskHeadroomInsufficient => &[
                "Estimated build disk requirement exceeds available free space",
                "Try a different worker with more headroom",
                "Clean up old build artifacts to free space",
            ],
            Self::WorkerReclaimProtected => &[
                "Active build artifacts were protected from reclaim",
                "Wait for current builds to complete before retrying reclaim",
                "Only idle cache entries are eligible for eviction",
            ],

            // Build
            Self::BuildCompilationFailed => &[
                "Review compilation errors in output",
                "Verify code compiles locally first",
                "Check for missing dependencies on worker",
            ],
            Self::BuildUnknownCommand => &[
                "Check that the command is supported",
                "Verify cargo/rustc version compatibility",
                "Review RCH command pattern configuration",
            ],
            Self::BuildKilledBySignal => &[
                "Check worker system logs for OOM killer",
                "Review build memory requirements",
                "Check if build was manually interrupted",
            ],
            Self::BuildTimeout => &[
                "Increase build timeout in configuration",
                "Check for infinite loops or hangs",
                "Verify worker is not overloaded",
            ],
            Self::BuildOutputError => &[
                "Check worker disk space",
                "Verify PTY allocation settings",
                "Review output buffer configuration",
            ],
            Self::BuildWorkdirError => &[
                "Verify remote_base_dir is writable",
                "Check directory permissions on worker",
                "Ensure path does not contain special characters",
            ],
            Self::BuildToolchainError => &[
                "Verify toolchain is installed on worker",
                "Check rustup default toolchain",
                "Review toolchain override settings",
            ],
            Self::BuildEnvError => &[
                "Check environment variable configuration",
                "Verify required environment is set on worker",
                "Review shell initialization on worker",
            ],
            Self::BuildIncrementalError => &[
                "Run 'cargo clean' on remote workspace",
                "Delete incremental compilation cache",
                "Try full rebuild with --release",
            ],
            Self::BuildArtifactMissing => &[
                "Verify build completed successfully",
                "Check artifact path configuration",
                "Review build output for artifact location",
            ],
            Self::BuildArtifactSyncEmpty => &[
                "Treat the local build as INCOMPLETE: local binaries may be stale",
                "Re-run the build (or build locally) before trusting any binary",
                "Check that the cargo profile's output directory matches the artifact patterns",
            ],
            Self::BuildArtifactForeignTarget => &[
                "Treat the local target directory as POISONED: rebuild for this host",
                "Pin the build to an explicit --target so the output triple is unambiguous",
                "Restrict the project to a same-platform worker (RCH_WORKER, or a worker `os` declaration)",
            ],
            Self::BuildCargoWorkspaceInheritance => &[
                "Verify dependency workspace metadata roots are synced",
                "Isolate remote sync roots from unrelated outer Cargo workspaces",
                "Check path dependency manifests for workspace-inherited fields",
            ],

            // Process Triage
            Self::ProcessTriageAdapterUnavailable => &[
                "Ensure the process triage adapter binary is installed",
                "Check PATH includes the adapter binary location",
                "Verify the adapter version is compatible with this RCH version",
            ],
            Self::ProcessTriageDetectorUncertain => &[
                "Process classification was inconclusive — no action taken",
                "Review the process list manually for suspicious entries",
                "Adjust detector confidence threshold if false negatives are common",
            ],
            Self::ProcessTriagePolicyViolation => &[
                "The requested action is blocked by safe-action policy",
                "Review the escalation level required for this action class",
                "Use a lower-risk action class or request manual approval",
            ],
            Self::ProcessTriageTransportError => &[
                "Communication with the process triage adapter failed",
                "Verify the adapter process is running and responsive",
                "Check for socket/pipe errors in adapter logs",
            ],
            Self::ProcessTriageExecutorError => &[
                "The process triage executor encountered a runtime error",
                "Check adapter logs for detailed error output",
                "Verify the target process is still running",
            ],
            Self::ProcessTriageTimeout => &[
                "Process triage operation exceeded the configured timeout",
                "Increase timeout in ProcessTriageTimeoutPolicy if needed",
                "Check for adapter hangs or system-level resource contention",
            ],
            Self::ProcessTriagePartialResult => &[
                "Not all requested triage actions completed successfully",
                "Review the partial result for which actions succeeded",
                "Retry failed actions individually for better diagnostics",
            ],
            Self::ProcessTriageInvalidRequest => &[
                "The process triage request is malformed or missing required fields",
                "Validate request against the ProcessTriage contract schema",
                "Check the contract schema version compatibility",
            ],

            // Cancellation
            Self::CancelGracefulSent => &[
                "Graceful cancellation signal (SIGTERM) was sent to the build process",
                "The build should terminate within the grace period",
                "Use force cancel if the process does not respond",
            ],
            Self::CancelEscalatedKill => &[
                "Build did not respond to graceful cancel within the grace period",
                "SIGKILL was sent to forcefully terminate the process",
                "Check worker for orphaned processes if this occurs frequently",
            ],
            Self::CancelRemoteKillFailed => &[
                "SSH kill command to the remote worker failed",
                "Verify SSH connectivity to the worker",
                "Check that the remote process PID is still valid",
            ],
            Self::CancelCleanupFailed => &[
                "Post-cancellation cleanup did not complete successfully",
                "Check worker disk space and permissions",
                "Verify remote working directory state manually",
            ],
            Self::CancelSlotLeak => &[
                "Worker slots were not properly released after cancellation",
                "Check worker slot accounting for inconsistencies",
                "Restart the daemon if slot leak persists",
            ],
            Self::CancelTimeoutExceeded => &[
                "Cancellation did not complete within the policy time budget",
                "The build may still be running on the worker",
                "Consider increasing cancellation timeouts or force-cancelling",
            ],

            // Transfer
            Self::TransferRsyncFailed => &[
                "Verify rsync is installed on both ends",
                "Check SSH connectivity to worker",
                "Review rsync exclude patterns",
            ],
            Self::TransferTimeout => &[
                "Increase transfer timeout in configuration",
                "Check network bandwidth to worker",
                "Consider using incremental sync",
            ],
            Self::TransferSourceMissing => &[
                "Verify source files exist locally",
                "Check file patterns in configuration",
                "Review .rchignore exclusions",
            ],
            Self::TransferDestError => &[
                "Check remote directory permissions and ownership",
                "Verify remote_base_dir is valid",
                "Ensure sufficient disk space on worker",
            ],
            Self::TransferDiskFull => &[
                "Clean up old builds on worker",
                "Check disk usage: df -h on worker",
                "Increase disk allocation for worker",
            ],
            Self::TransferPermissionDenied => &[
                "Check ownership of /data/projects/<repo> on the worker",
                "Verify SSH user has write permissions",
                "Repair drift if needed: sudo chown -R <ssh-user>:<ssh-user> /data/projects/<repo>",
            ],
            Self::TransferChecksumError => &[
                "Retry the transfer",
                "Check for network issues",
                "Verify file integrity on source",
            ],
            Self::TransferBinaryFailed => &[
                "Check network connectivity",
                "Verify binary URL is accessible",
                "Try manual download to diagnose",
            ],
            Self::TransferIncomplete => &[
                "Retry the transfer operation",
                "Check for network interruptions",
                "Review transfer logs for details",
            ],
            Self::TransferProtocolError => &[
                "Verify rsync version compatibility",
                "Check SSH protocol settings",
                "Review transfer configuration",
            ],
            Self::DependencyPreflightMissing => &[
                "Inspect the dependency preflight evidence for the missing remote path",
                "Ensure every dependency root in the closure is synced to the worker",
                "Verify Cargo.toml and required source entrypoints exist on the worker",
            ],
            Self::DependencyPreflightStale => &[
                "Rerun after a successful sync of all dependency roots",
                "Check whether transfer estimation skipped a dependency root",
                "Inspect dependency preflight evidence for the stale root",
            ],
            Self::DependencyPreflightUnknown => &[
                "Inspect sync and SSH logs for the dependency preflight probe",
                "Retry after worker connectivity and shell probes are healthy",
                "Use verbose output to view the full dependency preflight report",
            ],
            Self::DependencyPreflightPolicyViolation => &[
                "Move path dependencies under the configured canonical project root",
                "Use /data/projects or /dp topology aliases consistently",
                "Inspect the dependency closure policy diagnostics before retrying",
            ],
            Self::DependencyPreflightTimeout => &[
                "Retry after system load decreases",
                "Inspect cargo metadata latency for the workspace",
                "Increase planner timeout only after ruling out dependency graph issues",
            ],

            // Internal
            Self::InternalDaemonSocket => &[
                "Start the daemon: rchd start",
                "Check socket path permissions",
                "Verify no stale socket file exists",
            ],
            Self::InternalDaemonProtocol => &[
                "Restart the daemon: rchd restart",
                "Check for version mismatch between rch and rchd",
                "Review daemon logs for details",
            ],
            Self::InternalDaemonNotRunning => &[
                "Start the daemon: rchd start",
                "Check if daemon crashed: journalctl -u rchd",
                "Verify daemon configuration",
            ],
            Self::InternalIpcError => &[
                "Restart the daemon",
                "Check system message queue limits",
                "Review logs for detailed error",
            ],
            Self::InternalStateError => &[
                "Restart the daemon",
                "Clear any lock files",
                "Report bug if persists",
            ],
            Self::InternalSerdeError => &[
                "Check for corrupted state files",
                "Clear cache and restart",
                "Report bug with reproduction steps",
            ],
            Self::InternalHookError => &[
                "Verify hook script exists and is executable",
                "Check hook script for errors",
                "Review hook timeout settings",
            ],
            Self::InternalMetricsError => &[
                "Check metrics file permissions",
                "Verify disk space for metrics",
                "Review metrics configuration",
            ],
            Self::InternalLoggingError => &[
                "Check log directory permissions",
                "Verify disk space for logs",
                "Review logging configuration",
            ],
            Self::InternalUpdateError => &[
                "Check network connectivity",
                "Verify update server is reachable",
                "Try manual update check",
            ],
        }
    }

    /// Returns documentation URL for this error, if available.
    #[must_use]
    pub const fn doc_url(&self) -> Option<&'static str> {
        // Use specific doc pages for new sub-ranges when available
        match self {
            Self::PathDepManifestParseFailed
            | Self::PathDepMissing
            | Self::PathDepCyclic
            | Self::PathDepPolicyViolation
            | Self::PathDepMetadataFailed
            | Self::PathDepMetadataParseFailed => Some("https://rch.dev/docs/path-deps"),

            Self::ClosurePlanFailed
            | Self::ClosureFailOpen
            | Self::ClosureHighRisk
            | Self::ClosureMissingData
            | Self::ClosureNonDeterministic
            | Self::ClosureFingerprintMismatch => Some("https://rch.dev/docs/dependency-closure"),

            Self::WorkerDiskPressureCritical
            | Self::WorkerDiskPressureWarning
            | Self::WorkerTelemetryGap
            | Self::WorkerDiskIoHigh
            | Self::WorkerMemoryPressureHigh
            | Self::WorkerReclaimFailed
            | Self::WorkerDiskHeadroomInsufficient
            | Self::WorkerReclaimProtected => Some("https://rch.dev/docs/disk-pressure"),

            Self::ProcessTriageAdapterUnavailable
            | Self::ProcessTriageDetectorUncertain
            | Self::ProcessTriagePolicyViolation
            | Self::ProcessTriageTransportError
            | Self::ProcessTriageExecutorError
            | Self::ProcessTriageTimeout
            | Self::ProcessTriagePartialResult
            | Self::ProcessTriageInvalidRequest => Some("https://rch.dev/docs/process-triage"),

            Self::CancelGracefulSent
            | Self::CancelEscalatedKill
            | Self::CancelRemoteKillFailed
            | Self::CancelCleanupFailed
            | Self::CancelSlotLeak
            | Self::CancelTimeoutExceeded => Some("https://rch.dev/docs/cancellation"),

            Self::DependencyPreflightMissing
            | Self::DependencyPreflightStale
            | Self::DependencyPreflightUnknown
            | Self::DependencyPreflightPolicyViolation
            | Self::DependencyPreflightTimeout => Some("https://rch.dev/docs/sync"),

            _ => match self.category() {
                ErrorCategory::Config => Some("https://rch.dev/docs/config"),
                ErrorCategory::Network => Some("https://rch.dev/docs/ssh"),
                ErrorCategory::Worker => Some("https://rch.dev/docs/workers"),
                ErrorCategory::Build => Some("https://rch.dev/docs/builds"),
                ErrorCategory::Transfer => Some("https://rch.dev/docs/sync"),
                ErrorCategory::Internal => Some("https://rch.dev/docs/troubleshooting"),
            },
        }
    }

    /// Returns all error codes.
    #[must_use]
    pub const fn all() -> &'static [ErrorCode] {
        &[
            // Config
            Self::ConfigNotFound,
            Self::ConfigReadError,
            Self::ConfigParseError,
            Self::ConfigValidationError,
            Self::ConfigEnvError,
            Self::ConfigProfileNotFound,
            Self::ConfigNoWorkers,
            Self::ConfigInvalidWorker,
            Self::ConfigSshKeyError,
            Self::ConfigSocketPathError,
            // Path-Dependency
            Self::PathDepManifestParseFailed,
            Self::PathDepMissing,
            Self::PathDepCyclic,
            Self::PathDepPolicyViolation,
            Self::PathDepMetadataFailed,
            Self::PathDepMetadataParseFailed,
            // Dependency-Closure
            Self::ClosurePlanFailed,
            Self::ClosureFailOpen,
            Self::ClosureHighRisk,
            Self::ClosureMissingData,
            Self::ClosureNonDeterministic,
            Self::ClosureFingerprintMismatch,
            // Network
            Self::SshConnectionFailed,
            Self::SshAuthFailed,
            Self::SshKeyError,
            Self::SshHostKeyError,
            Self::SshTimeout,
            Self::SshSessionDropped,
            Self::NetworkDnsError,
            Self::NetworkUnreachable,
            Self::NetworkConnectionRefused,
            Self::NetworkTimeout,
            // Worker
            Self::WorkerNoneAvailable,
            Self::WorkerAllUnhealthy,
            Self::WorkerHealthCheckFailed,
            Self::WorkerSelfTestFailed,
            Self::WorkerAtCapacity,
            Self::WorkerMissingToolchain,
            Self::WorkerStateError,
            Self::WorkerCircuitOpen,
            Self::WorkerSelectionFailed,
            Self::WorkerLoadQueryFailed,
            // Disk Pressure / Storage
            Self::WorkerDiskPressureCritical,
            Self::WorkerDiskPressureWarning,
            Self::WorkerTelemetryGap,
            Self::WorkerDiskIoHigh,
            Self::WorkerMemoryPressureHigh,
            Self::WorkerReclaimFailed,
            Self::WorkerDiskHeadroomInsufficient,
            Self::WorkerReclaimProtected,
            // Build
            Self::BuildCompilationFailed,
            Self::BuildUnknownCommand,
            Self::BuildKilledBySignal,
            Self::BuildTimeout,
            Self::BuildOutputError,
            Self::BuildWorkdirError,
            Self::BuildToolchainError,
            Self::BuildEnvError,
            Self::BuildIncrementalError,
            Self::BuildArtifactMissing,
            Self::BuildArtifactSyncEmpty,
            Self::BuildArtifactForeignTarget,
            Self::BuildCargoWorkspaceInheritance,
            // Process Triage
            Self::ProcessTriageAdapterUnavailable,
            Self::ProcessTriageDetectorUncertain,
            Self::ProcessTriagePolicyViolation,
            Self::ProcessTriageTransportError,
            Self::ProcessTriageExecutorError,
            Self::ProcessTriageTimeout,
            Self::ProcessTriagePartialResult,
            Self::ProcessTriageInvalidRequest,
            // Cancellation
            Self::CancelGracefulSent,
            Self::CancelEscalatedKill,
            Self::CancelRemoteKillFailed,
            Self::CancelCleanupFailed,
            Self::CancelSlotLeak,
            Self::CancelTimeoutExceeded,
            // Transfer
            Self::TransferRsyncFailed,
            Self::TransferTimeout,
            Self::TransferSourceMissing,
            Self::TransferDestError,
            Self::TransferDiskFull,
            Self::TransferPermissionDenied,
            Self::TransferChecksumError,
            Self::TransferBinaryFailed,
            Self::TransferIncomplete,
            Self::TransferProtocolError,
            Self::DependencyPreflightMissing,
            Self::DependencyPreflightStale,
            Self::DependencyPreflightUnknown,
            Self::DependencyPreflightPolicyViolation,
            Self::DependencyPreflightTimeout,
            // Internal
            Self::InternalDaemonSocket,
            Self::InternalDaemonProtocol,
            Self::InternalDaemonNotRunning,
            Self::InternalIpcError,
            Self::InternalStateError,
            Self::InternalSerdeError,
            Self::InternalHookError,
            Self::InternalMetricsError,
            Self::InternalLoggingError,
            Self::InternalUpdateError,
        ]
    }
}

impl fmt::Display for ErrorCode {
    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
        write!(f, "{}: {}", self.code_string(), self.message())
    }
}

/// Error category for grouping related errors.
#[derive(Debug, Clone, Copy, PartialEq, Eq, Hash, Serialize, Deserialize, schemars::JsonSchema)]
#[serde(rename_all = "lowercase")]
pub enum ErrorCategory {
    /// Configuration and setup errors (E001-E099)
    Config,
    /// Network and SSH connectivity errors (E100-E199)
    Network,
    /// Worker selection and management errors (E200-E299)
    Worker,
    /// Compilation and build errors (E300-E399)
    Build,
    /// File transfer and sync errors (E400-E499)
    Transfer,
    /// Internal/unexpected errors (E500-E599)
    Internal,
}

impl ErrorCategory {
    /// Returns a human-readable name for the category.
    #[must_use]
    pub const fn name(&self) -> &'static str {
        match self {
            Self::Config => "Configuration",
            Self::Network => "Network",
            Self::Worker => "Worker",
            Self::Build => "Build",
            Self::Transfer => "Transfer",
            Self::Internal => "Internal",
        }
    }

    /// Returns a short description of the category.
    #[must_use]
    pub const fn description(&self) -> &'static str {
        match self {
            Self::Config => "Configuration file and environment setup issues",
            Self::Network => "SSH connectivity and network communication issues",
            Self::Worker => "Remote worker selection, health, and management issues",
            Self::Build => "Remote compilation and build process issues",
            Self::Transfer => "File synchronization and transfer issues",
            Self::Internal => "Internal errors that may indicate bugs",
        }
    }
}

impl fmt::Display for ErrorCategory {
    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
        write!(f, "{}", self.name())
    }
}

/// Complete error entry with all metadata.
#[derive(Debug, Clone, PartialEq, Eq, Serialize, Deserialize)]
pub struct ErrorEntry {
    /// Error code string (e.g., "RCH-E001")
    pub code: String,
    /// Error category
    pub category: ErrorCategory,
    /// Human-readable error message
    pub message: String,
    /// Steps to remediate the error
    pub remediation: Vec<String>,
    /// Documentation URL, if available
    pub doc_url: Option<String>,
}

impl ErrorEntry {
    /// Formats the error for display with full remediation steps.
    #[must_use]
    pub fn format_full(&self) -> String {
        let mut output = format!("[{}] {}\n\n", self.code, self.message);

        if !self.remediation.is_empty() {
            output.push_str("Remediation steps:\n");
            for (i, step) in self.remediation.iter().enumerate() {
                output.push_str(&format!("  {}. {}\n", i + 1, step));
            }
        }

        if let Some(url) = &self.doc_url {
            output.push_str(&format!("\nFor more information: {}\n", url));
        }

        output
    }

    /// Formats the error as a single line.
    #[must_use]
    pub fn format_brief(&self) -> String {
        format!("[{}] {}", self.code, self.message)
    }
}

impl fmt::Display for ErrorEntry {
    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
        write!(f, "{}", self.format_brief())
    }
}

#[cfg(test)]
mod tests {
    use super::*;

    #[test]
    fn test_error_code_numbers_are_unique() {
        let mut seen = std::collections::HashSet::new();
        for code in ErrorCode::all() {
            let num = code.code_number();
            assert!(
                seen.insert(num),
                "Duplicate error code number: {} for {:?}",
                num,
                code
            );
        }
    }

    #[test]
    fn test_error_code_format() {
        assert_eq!(ErrorCode::ConfigNotFound.code_string(), "RCH-E001");
        assert_eq!(ErrorCode::SshConnectionFailed.code_string(), "RCH-E100");
        assert_eq!(ErrorCode::WorkerNoneAvailable.code_string(), "RCH-E200");
        assert_eq!(ErrorCode::BuildCompilationFailed.code_string(), "RCH-E300");
        assert_eq!(ErrorCode::TransferRsyncFailed.code_string(), "RCH-E400");
        assert_eq!(ErrorCode::InternalDaemonSocket.code_string(), "RCH-E500");

        // New subcategory codes
        assert_eq!(
            ErrorCode::PathDepManifestParseFailed.code_string(),
            "RCH-E013"
        );
        assert_eq!(ErrorCode::ClosurePlanFailed.code_string(), "RCH-E019");
        assert_eq!(
            ErrorCode::WorkerDiskPressureCritical.code_string(),
            "RCH-E210"
        );
        assert_eq!(
            ErrorCode::ProcessTriageAdapterUnavailable.code_string(),
            "RCH-E310"
        );
        assert_eq!(
            ErrorCode::DependencyPreflightMissing.code_string(),
            "RCH-E410"
        );
    }

    #[test]
    fn test_error_categories() {
        assert_eq!(ErrorCode::ConfigNotFound.category(), ErrorCategory::Config);
        assert_eq!(
            ErrorCode::SshConnectionFailed.category(),
            ErrorCategory::Network
        );
        assert_eq!(
            ErrorCode::WorkerNoneAvailable.category(),
            ErrorCategory::Worker
        );
        assert_eq!(
            ErrorCode::BuildCompilationFailed.category(),
            ErrorCategory::Build
        );
        assert_eq!(
            ErrorCode::TransferRsyncFailed.category(),
            ErrorCategory::Transfer
        );
        assert_eq!(
            ErrorCode::InternalDaemonSocket.category(),
            ErrorCategory::Internal
        );
    }

    #[test]
    fn test_all_errors_have_message() {
        for code in ErrorCode::all() {
            let msg = code.message();
            assert!(!msg.is_empty(), "Error {:?} has empty message", code);
        }
    }

    #[test]
    fn test_all_errors_have_remediation() {
        for code in ErrorCode::all() {
            let steps = code.remediation();
            assert!(
                !steps.is_empty(),
                "Error {:?} has no remediation steps",
                code
            );
        }
    }

    #[test]
    fn test_error_entry_serialization() {
        let entry = ErrorCode::ConfigNotFound.entry();
        let json = serde_json::to_string(&entry).expect("serialization failed");
        assert!(json.contains("RCH-E001"));
        assert!(json.contains("config"));

        let parsed: ErrorEntry = serde_json::from_str(&json).expect("deserialization failed");
        assert_eq!(parsed.code, "RCH-E001");
        assert_eq!(parsed.category, ErrorCategory::Config);
    }

    #[test]
    fn test_error_code_serialization() {
        let code = ErrorCode::SshAuthFailed;
        let json = serde_json::to_string(&code).expect("serialization failed");
        assert_eq!(json, "\"SSH_AUTH_FAILED\"");

        let parsed: ErrorCode = serde_json::from_str(&json).expect("deserialization failed");
        assert_eq!(parsed, ErrorCode::SshAuthFailed);
    }

    #[test]
    fn test_format_full() {
        let entry = ErrorCode::ConfigNotFound.entry();
        let formatted = entry.format_full();

        assert!(formatted.contains("[RCH-E001]"));
        assert!(formatted.contains("Configuration file not found"));
        assert!(formatted.contains("Remediation steps:"));
        assert!(formatted.contains("rch init"));
    }

    #[test]
    fn test_format_brief() {
        let entry = ErrorCode::ConfigNotFound.entry();
        let formatted = entry.format_brief();

        assert_eq!(formatted, "[RCH-E001] Configuration file not found");
    }

    #[test]
    fn test_display_implementations() {
        let code = ErrorCode::ConfigNotFound;
        let display = format!("{}", code);
        assert!(display.contains("RCH-E001"));
        assert!(display.contains("Configuration file not found"));

        let category = ErrorCategory::Config;
        assert_eq!(format!("{}", category), "Configuration");
    }

    #[test]
    fn test_category_ranges() {
        // Verify each category has errors in the correct range
        for code in ErrorCode::all() {
            let num = code.code_number();
            let cat = code.category();
            match cat {
                ErrorCategory::Config => assert!(num < 100, "{:?} should be < 100", code),
                ErrorCategory::Network => {
                    assert!((100..200).contains(&num), "{:?} should be 100-199", code)
                }
                ErrorCategory::Worker => {
                    assert!((200..300).contains(&num), "{:?} should be 200-299", code)
                }
                ErrorCategory::Build => {
                    assert!((300..400).contains(&num), "{:?} should be 300-399", code)
                }
                ErrorCategory::Transfer => {
                    assert!((400..500).contains(&num), "{:?} should be 400-499", code)
                }
                ErrorCategory::Internal => {
                    assert!((500..600).contains(&num), "{:?} should be 500-599", code)
                }
            }
        }
    }

    // =========================================================================
    // Contract Tests — Code Stability (bd-vvmd.6.1)
    // =========================================================================

    /// Contract test: path-dependency error codes are stable across versions.
    #[test]
    fn test_path_dep_error_codes_stable() {
        assert_eq!(ErrorCode::PathDepManifestParseFailed.code_number(), 13);
        assert_eq!(ErrorCode::PathDepMissing.code_number(), 14);
        assert_eq!(ErrorCode::PathDepCyclic.code_number(), 15);
        assert_eq!(ErrorCode::PathDepPolicyViolation.code_number(), 16);
        assert_eq!(ErrorCode::PathDepMetadataFailed.code_number(), 17);
        assert_eq!(ErrorCode::PathDepMetadataParseFailed.code_number(), 18);
    }

    /// Contract test: dependency-closure error codes are stable.
    #[test]
    fn test_closure_error_codes_stable() {
        assert_eq!(ErrorCode::ClosurePlanFailed.code_number(), 19);
        assert_eq!(ErrorCode::ClosureFailOpen.code_number(), 20);
        assert_eq!(ErrorCode::ClosureHighRisk.code_number(), 21);
        assert_eq!(ErrorCode::ClosureMissingData.code_number(), 22);
        assert_eq!(ErrorCode::ClosureNonDeterministic.code_number(), 23);
        assert_eq!(ErrorCode::ClosureFingerprintMismatch.code_number(), 24);
    }

    /// Contract test: disk pressure/storage error codes are stable.
    #[test]
    fn test_disk_pressure_error_codes_stable() {
        assert_eq!(ErrorCode::WorkerDiskPressureCritical.code_number(), 210);
        assert_eq!(ErrorCode::WorkerDiskPressureWarning.code_number(), 211);
        assert_eq!(ErrorCode::WorkerTelemetryGap.code_number(), 212);
        assert_eq!(ErrorCode::WorkerDiskIoHigh.code_number(), 213);
        assert_eq!(ErrorCode::WorkerMemoryPressureHigh.code_number(), 214);
        assert_eq!(ErrorCode::WorkerReclaimFailed.code_number(), 215);
        assert_eq!(ErrorCode::WorkerDiskHeadroomInsufficient.code_number(), 216);
        assert_eq!(ErrorCode::WorkerReclaimProtected.code_number(), 217);
    }

    /// Contract test: process triage error codes are stable.
    #[test]
    fn test_process_triage_error_codes_stable() {
        assert_eq!(
            ErrorCode::ProcessTriageAdapterUnavailable.code_number(),
            310
        );
        assert_eq!(ErrorCode::ProcessTriageDetectorUncertain.code_number(), 311);
        assert_eq!(ErrorCode::ProcessTriagePolicyViolation.code_number(), 312);
        assert_eq!(ErrorCode::ProcessTriageTransportError.code_number(), 313);
        assert_eq!(ErrorCode::ProcessTriageExecutorError.code_number(), 314);
        assert_eq!(ErrorCode::ProcessTriageTimeout.code_number(), 315);
        assert_eq!(ErrorCode::ProcessTriagePartialResult.code_number(), 316);
        assert_eq!(ErrorCode::ProcessTriageInvalidRequest.code_number(), 317);
    }

    /// Contract test: cancellation error codes are stable.
    #[test]
    fn test_cancellation_error_codes_stable() {
        assert_eq!(ErrorCode::CancelGracefulSent.code_number(), 320);
        assert_eq!(ErrorCode::CancelEscalatedKill.code_number(), 321);
        assert_eq!(ErrorCode::CancelRemoteKillFailed.code_number(), 322);
        assert_eq!(ErrorCode::CancelCleanupFailed.code_number(), 323);
        assert_eq!(ErrorCode::CancelSlotLeak.code_number(), 324);
        assert_eq!(ErrorCode::CancelTimeoutExceeded.code_number(), 325);
    }

    /// Contract test: topology-sensitive build error codes are stable.
    #[test]
    fn test_build_topology_error_codes_stable() {
        assert_eq!(ErrorCode::BuildCargoWorkspaceInheritance.code_number(), 329);
        assert_eq!(
            ErrorCode::BuildCargoWorkspaceInheritance.category(),
            ErrorCategory::Build
        );
    }

    /// Contract test: artifact-sync-emptiness build error code is stable.
    #[test]
    fn test_build_artifact_sync_empty_error_code_stable() {
        assert_eq!(ErrorCode::BuildArtifactSyncEmpty.code_number(), 326);
        assert_eq!(
            ErrorCode::BuildArtifactSyncEmpty.category(),
            ErrorCategory::Build
        );
        assert_eq!(ErrorCode::BuildArtifactSyncEmpty.code_string(), "RCH-E326");
        // Remediation must name the stale-local-artifact hazard.
        assert!(
            ErrorCode::BuildArtifactSyncEmpty
                .remediation()
                .iter()
                .any(|step| step.to_lowercase().contains("stale")),
            "RCH-E326 remediation must warn about stale local artifacts"
        );
    }

    /// Contract test: the foreign-target artifact build error code is stable.
    #[test]
    fn test_build_artifact_foreign_target_error_code_stable() {
        assert_eq!(ErrorCode::BuildArtifactForeignTarget.code_number(), 327);
        assert_eq!(
            ErrorCode::BuildArtifactForeignTarget.category(),
            ErrorCategory::Build
        );
        assert_eq!(
            ErrorCode::BuildArtifactForeignTarget.code_string(),
            "RCH-E327"
        );
        // Remediation must tell the operator the local tree needs a rebuild.
        assert!(
            ErrorCode::BuildArtifactForeignTarget
                .remediation()
                .iter()
                .any(|step| step.to_lowercase().contains("rebuild")),
            "RCH-E327 remediation must tell the operator to rebuild for this host"
        );
    }

    /// Contract test: dependency preflight error codes are stable.
    #[test]
    fn test_dependency_preflight_error_codes_stable() {
        assert_eq!(ErrorCode::DependencyPreflightMissing.code_number(), 410);
        assert_eq!(ErrorCode::DependencyPreflightStale.code_number(), 411);
        assert_eq!(ErrorCode::DependencyPreflightUnknown.code_number(), 412);
        assert_eq!(
            ErrorCode::DependencyPreflightPolicyViolation.code_number(),
            413
        );
        assert_eq!(ErrorCode::DependencyPreflightTimeout.code_number(), 414);
    }

    /// Contract test: new error codes belong to correct categories.
    #[test]
    fn test_new_error_codes_correct_categories() {
        // Path-dep and closure are in Config range (E001-E099)
        assert_eq!(ErrorCode::PathDepCyclic.category(), ErrorCategory::Config);
        assert_eq!(
            ErrorCode::ClosurePlanFailed.category(),
            ErrorCategory::Config
        );

        // Disk pressure in Worker range (E200-E299)
        assert_eq!(
            ErrorCode::WorkerDiskPressureCritical.category(),
            ErrorCategory::Worker
        );
        assert_eq!(
            ErrorCode::WorkerReclaimProtected.category(),
            ErrorCategory::Worker
        );

        // Process triage in Build range (E300-E399)
        assert_eq!(
            ErrorCode::ProcessTriageTimeout.category(),
            ErrorCategory::Build
        );
        assert_eq!(
            ErrorCode::ProcessTriageInvalidRequest.category(),
            ErrorCategory::Build
        );

        // Cancellation in Build range (E300-E399)
        assert_eq!(
            ErrorCode::CancelGracefulSent.category(),
            ErrorCategory::Build
        );
        assert_eq!(
            ErrorCode::CancelTimeoutExceeded.category(),
            ErrorCategory::Build
        );

        // Dependency preflight failures happen after sync and belong to Transfer.
        assert_eq!(
            ErrorCode::DependencyPreflightMissing.category(),
            ErrorCategory::Transfer
        );
        assert_eq!(
            ErrorCode::DependencyPreflightTimeout.category(),
            ErrorCategory::Transfer
        );
    }

    /// Contract test: all new error codes have doc URLs pointing to correct sections.
    #[test]
    fn test_new_error_codes_doc_urls() {
        assert_eq!(
            ErrorCode::PathDepCyclic.doc_url(),
            Some("https://rch.dev/docs/path-deps")
        );
        assert_eq!(
            ErrorCode::ClosureFailOpen.doc_url(),
            Some("https://rch.dev/docs/dependency-closure")
        );
        assert_eq!(
            ErrorCode::WorkerDiskPressureCritical.doc_url(),
            Some("https://rch.dev/docs/disk-pressure")
        );
        assert_eq!(
            ErrorCode::ProcessTriageTimeout.doc_url(),
            Some("https://rch.dev/docs/process-triage")
        );
        assert_eq!(
            ErrorCode::CancelGracefulSent.doc_url(),
            Some("https://rch.dev/docs/cancellation")
        );
        assert_eq!(
            ErrorCode::DependencyPreflightMissing.doc_url(),
            Some("https://rch.dev/docs/sync")
        );
    }

    /// Contract test: new error codes roundtrip through JSON serialization.
    #[test]
    fn test_new_error_codes_json_roundtrip() {
        let new_codes = [
            ErrorCode::PathDepManifestParseFailed,
            ErrorCode::ClosurePlanFailed,
            ErrorCode::WorkerDiskPressureCritical,
            ErrorCode::ProcessTriageAdapterUnavailable,
            ErrorCode::DependencyPreflightMissing,
        ];

        for code in new_codes {
            let json = serde_json::to_string(&code).expect("serialization failed");
            let parsed: ErrorCode = serde_json::from_str(&json).expect("deserialization failed");
            assert_eq!(parsed, code, "Roundtrip failed for {:?}", code);

            // Entry should also roundtrip
            let entry = code.entry();
            let entry_json = serde_json::to_string(&entry).expect("entry serialization failed");
            let parsed_entry: ErrorEntry =
                serde_json::from_str(&entry_json).expect("entry deserialization failed");
            assert_eq!(parsed_entry.code, code.code_string());
        }
    }

    /// Contract test: total error code count is as expected (guards against accidental removal).
    #[test]
    fn test_total_error_code_count() {
        let total = ErrorCode::all().len();
        // 10 config + 12 path-dep/closure + 10 network + 10 worker + 8 storage
        // + 10 build + 8 process-triage + 6 cancellation + 15 transfer + 10 internal = 99
        assert!(
            total >= 100,
            "Expected at least 100 error codes (was {}); did a code get accidentally removed?",
            total,
        );
    }
}