rax 0.1.5

/* Rax -- A radix tree implementation.
 *
 * Copyright (c) 2017, Salvatore Sanfilippo <antirez at gmail dot com>
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 *   * Redistributions of source code must retain the above copyright notice,
 *     this list of conditions and the following disclaimer.
 *   * Redistributions in binary form must reproduce the above copyright
 *     notice, this list of conditions and the following disclaimer in the
 *     documentation and/or other materials provided with the distribution.
 *   * Neither the name of Redis nor the names of its contributors may be used
 *     to endorse or promote products derived from this software without
 *     specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

#include <stdlib.h>
#include <string.h>
#include <assert.h>
#include <stdio.h>
#include <errno.h>
#include <math.h>
#include "rax.h"

//#ifndef RAX_MALLOC_INCLUDE
//#define RAX_MALLOC_INCLUDE "rax_malloc.h"
//#endif
//
//#include RAX_MALLOC_INCLUDE "rax_malloc.h"
#include "rax_malloc.h"

/* This is a special pointer that is guaranteed to never have the same value
 * of a radix tree node. It's used in order to report "not found" error without
 * requiring the function to have multiple return values. */
void *raxNotFound = (void *) "rax-not-found-pointer";


/* -------------------------------- Debugging ------------------------------ */

void raxDebugShowNode(const char *msg, raxNode *n);

/* Turn debugging messages on/off. */
#if 0
#define debugf(...)                                                            \
    do {                                                                       \
        printf("%s:%s:%d:\t", __FILE__, __FUNCTION__, __LINE__);               \
        printf(__VA_ARGS__);                                                   \
        fflush(stdout);                                                        \
    } while (0);

#define debugnode(msg,n) raxDebugShowNode(msg,n)
#else
#define debugf(...)
#define debugnode(msg, n)
#endif

/* ------------------------- raxStack functions --------------------------
 * The raxStack is a simple stack of pointers that is capable of switching
 * from using a stack-allocated array to dynamic heap once a given number of
 * items are reached. It is used in order to retain the list of parent nodes
 * while walking the radix tree in order to implement certain operations that
 * need to navigate the tree upward.
 * ------------------------------------------------------------------------- */

/* Initialize the stack. */
static inline void raxStackInit(raxStack *ts) {
    ts->stack = ts->static_items;
    ts->items = 0;
    ts->maxitems = RAX_STACK_STATIC_ITEMS;
    ts->oom = 0;
}

/* Push an item into the stack, returns 1 on success, 0 on out of memory. */
static inline int raxStackPush(raxStack *ts, void *ptr) {
//int raxStackPush(raxStack *ts, void *ptr) {
    if (ts->items == ts->maxitems) {
        if (ts->stack == ts->static_items) {
            ts->stack = rax_malloc(sizeof(void *) * ts->maxitems * 2);
            if (ts->stack == NULL) {
                ts->stack = ts->static_items;
                ts->oom = 1;
                errno = ENOMEM;
                return 0;
            }
            memcpy(ts->stack, ts->static_items, sizeof(void *) * ts->maxitems);
        } else {
            void **newalloc = rax_realloc(ts->stack, sizeof(void *) * ts->maxitems * 2);
            if (newalloc == NULL) {
                ts->oom = 1;
                errno = ENOMEM;
                return 0;
            }
            ts->stack = newalloc;
        }
        ts->maxitems *= 2;
    }
    ts->stack[ts->items] = ptr;
    ts->items++;
    return 1;
}

/* Pop an item from the stack, the function returns NULL if there are no
 * items to pop. */
static inline void *raxStackPop(raxStack *ts) {
    if (ts->items == 0) return NULL;
    ts->items--;
    return ts->stack[ts->items];
}

/* Return the stack item at the top of the stack without actually consuming
 * it. */
static inline void *raxStackPeek(raxStack *ts) {
    if (ts->items == 0) return NULL;
    return ts->stack[ts->items - 1];
}

/* Free the stack in case we used heap allocation. */
static inline void raxStackFree(raxStack *ts) {
    if (ts->stack != ts->static_items) rax_free(ts->stack);
}

/* ----------------------------------------------------------------------------
 * Radix tree implementation
 * --------------------------------------------------------------------------*/

/* Allocate a new non compressed node with the specified number of children.
 * If datafiled is true, the allocation is made large enough to hold the
 * associated data pointer.
 * Returns the new node pointer. On out of memory NULL is returned. */
raxNode *raxNewNode(size_t children, int datafield) {
    size_t nodesize = sizeof(raxNode) + children +
                      sizeof(raxNode *) * children;
    if (datafield) nodesize += sizeof(void *);
    raxNode *node = rax_malloc(nodesize);
    if (node == NULL) return NULL;
    node->iskey = 0;
    node->isnull = 0;
    node->iscompr = 0;
    node->size = children;
    return node;
}

/* Allocate a new rax and return its pointer. On out of memory the function
 * returns NULL. */
rax *raxNew(void) {
    rax *rax = rax_malloc(sizeof(*rax));
    if (rax == NULL) return NULL;
    rax->numele = 0;
    rax->numnodes = 1;
    rax->head = raxNewNode(0, 0);
    if (rax->head == NULL) {
        rax_free(rax);
        return NULL;
    } else {
        return rax;
    }
}

/* Return the current total size of the node. */
#define raxNodeCurrentLength(n) ( \
    sizeof(raxNode)+(n)->size+ \
    ((n)->iscompr ? sizeof(raxNode*) : sizeof(raxNode*)*(n)->size)+ \
    (((n)->iskey && !(n)->isnull)*sizeof(void*)) \
)

/* realloc the node to make room for auxiliary data in order
 * to store an item in that node. On out of memory NULL is returned. */
raxNode *raxReallocForData(raxNode *n, void *data) {
    if (data == NULL) return n; /* No reallocation needed, setting isnull=1 */
    size_t curlen = raxNodeCurrentLength(n);
    return rax_realloc(n, curlen + sizeof(void *));
}

/* Set the node auxiliary data to the specified pointer. */
void raxSetData(raxNode *n, void *data) {
    n->iskey = 1;
    if (data != NULL) {
        n->isnull = 0;
        void **ndata = (void **)
                ((char *) n + raxNodeCurrentLength(n) - sizeof(void *));
        memcpy(ndata, &data, sizeof(data));
    } else {
        n->isnull = 1;
    }
}

/* Get the node auxiliary data. */
void *raxGetData(raxNode *n) {
    if (n->isnull) return NULL;
    void **ndata = (void **) ((char *) n + raxNodeCurrentLength(n) - sizeof(void *));
    void *data;
    memcpy(&data, ndata, sizeof(data));
    return data;
}

/* Add a new child to the node 'n' representing the character 'c' and return
 * its new pointer, as well as the child pointer by reference. Additionally
 * '***parentlink' is populated with the raxNode pointer-to-pointer of where
 * the new child was stored, which is useful for the caller to replace the
 * child pointer if it gets reallocated.
 *
 * On success the new parent node pointer is returned (it may change because
 * of the realloc, so the caller should discard 'n' and use the new value).
 * On out of memory NULL is returned, and the old node is still valid. */
raxNode *raxAddChild(raxNode *n, unsigned char c, raxNode **childptr, raxNode ***parentlink) {
    assert(n->iscompr == 0);

    size_t curlen = sizeof(raxNode) +
                    n->size +
                    sizeof(raxNode *) * n->size;
    size_t newlen;

    /* Alloc the new child we will link to 'n'. */
    raxNode *child = raxNewNode(0, 0);
    if (child == NULL) return NULL;

    /* Make space in the original node. */
    if (n->iskey) curlen += sizeof(void *);
    newlen = curlen + sizeof(raxNode *) + 1; /* Add 1 char and 1 pointer. */
    raxNode *newn = rax_realloc(n, newlen);
    if (newn == NULL) {
        rax_free(child);
        return NULL;
    }
    n = newn;

    /* After the reallocation, we have 5/9 (depending on the system
     * pointer size) bytes at the end, that is, the additional char
     * in the 'data' section, plus one pointer to the new child:
     *
     * [numc][abx][ap][bp][xp]|auxp|.....
     *
     * Let's find where to insert the new child in order to make sure
     * it is inserted in-place lexicographically. */
    int pos;
    for (pos = 0; pos < n->size; pos++) {
        if (n->data[pos] > c) break;
    }

    /* Now, if present, move auxiliary data pointer at the end
     * so that we can mess with the other data without overwriting it.
     * We will obtain something like that:
     *
     * [numc][abx][ap][bp][xp].....|auxp| */
    unsigned char *src;
    if (n->iskey && !n->isnull) {
        src = n->data + n->size + sizeof(raxNode *) * n->size;
        memmove(src + 1 + sizeof(raxNode *), src, sizeof(void *));
    }

    /* Now imagine we are adding a node with edge 'c'. The insertion
     * point is between 'b' and 'x', so the 'pos' variable value is
     * To start, move all the child pointers after the insertion point
     * of 1+sizeof(pointer) bytes on the right, to obtain:
     *
     * [numc][abx][ap][bp].....[xp]|auxp| */
    src = n->data + n->size + sizeof(raxNode *) * pos;
    memmove(src + 1 + sizeof(raxNode *), src, sizeof(raxNode *) * (n->size - pos));

    /* Now make the space for the additional char in the data section,
     * but also move the pointers before the insertion point in the right
     * by 1 byte, in order to obtain the following:
     *
     * [numc][ab.x][ap][bp]....[xp]|auxp| */
    src = n->data + pos;
    memmove(src + 1, src, n->size - pos + sizeof(raxNode *) * pos);

    /* We can now set the character and its child node pointer to get:
     *
     * [numc][abcx][ap][bp][cp]....|auxp|
     * [numc][abcx][ap][bp][cp][xp]|auxp| */
    n->data[pos] = c;
    n->size++;
    raxNode **childfield = (raxNode **) (n->data + n->size + sizeof(raxNode *) * pos);
    memcpy(childfield, &child, sizeof(child));
    *childptr = child;
    *parentlink = childfield;
    return n;
}

/* Return the pointer to the last child pointer in a node. For the compressed
 * nodes this is the only child pointer. */
#define raxNodeLastChildPtr(n) ((raxNode**) ( \
    ((char*)(n)) + \
    raxNodeCurrentLength(n) - \
    sizeof(raxNode*) - \
    (((n)->iskey && !(n)->isnull) ? sizeof(void*) : 0) \
))

/* Return the pointer to the first child pointer. */
#define raxNodeFirstChildPtr(n) ((raxNode**)((n)->data+(n)->size))

/* Turn the node 'n', that must be a node without any children, into a
 * compressed node representing a set of nodes linked one after the other
 * and having exactly one child each. The node can be a key or not: this
 * property and the associated value if any will be preserved.
 *
 * The function also returns a child node, since the last node of the
 * compressed chain cannot be part of the chain: it has zero children while
 * we can only compress inner nodes with exactly one child each. */
raxNode *raxCompressNode(raxNode *n, unsigned char *s, size_t len, raxNode **child) {
    assert(n->size == 0 && n->iscompr == 0);
    void *data = NULL; /* Initialized only to avoid warnings. */
    size_t newsize;

    debugf("Compress node: %.*s\n", (int) len, s);

    /* Allocate the child to link to this node. */
    *child = raxNewNode(0, 0);
    if (*child == NULL) return NULL;

    /* Make space in the parent node. */
    newsize = sizeof(raxNode) + len + sizeof(raxNode *);
    if (n->iskey) {
        data = raxGetData(n); /* To restore it later. */
        if (!n->isnull) newsize += sizeof(void *);
    }
    raxNode *newn = rax_realloc(n, newsize);
    if (newn == NULL) {
        rax_free(*child);
        return NULL;
    }
    n = newn;

    n->iscompr = 1;
    n->size = len;
    memcpy(n->data, s, len);
    if (n->iskey) raxSetData(n, data);
    raxNode **childfield = raxNodeLastChildPtr(n);
    memcpy(childfield, child, sizeof(*child));
    return n;
}

/* Low level function that walks the tree looking for the string
 * 's' of 'len' bytes. The function returns the number of characters
 * of the key that was possible to process: if the returned integer
 * is the same as 'len', then it means that the node corresponding to the
 * string was found (however it may not be a key in case the node->iskey is
 * zero or if simply we stopped in the middle of a compressed node, so that
 * 'splitpos' is non zero).
 *
 * Otherwise if the returned integer is not the same as 'len', there was an
 * early stop during the tree walk because of a character mismatch.
 *
 * The node where the search ended (because the full string was processed
 * or because there was an early stop) is returned by reference as
 * '*stopnode' if the passed pointer is not NULL. This node link in the
 * parent's node is returned as '*plink' if not NULL. Finally, if the
 * search stopped in a compressed node, '*splitpos' returns the index
 * inside the compressed node where the search ended. This is useful to
 * know where to split the node for insertion.
 *
 * Note that when we stop in the middle of a compressed node with
 * a perfect match, this function will return a length equal to the
 * 'len' argument (all the key matched), and will return a *splitpos which is
 * always positive (that will represent the index of the character immediately
 * *after* the last match in the current compressed node).
 *
 * When instead we stop at a compressed node and *splitpos is zero, it
 * means that the current node represents the key (that is, none of the
 * compressed node characters are needed to represent the key, just all
 * its parents nodes). */
static inline size_t
raxLowWalk(rax *rax, unsigned char *s, size_t len, raxNode **stopnode, raxNode ***plink, int *splitpos, raxStack *ts) {
    raxNode *h = rax->head;
    raxNode **parentlink = &rax->head;

    size_t i = 0; /* Position in the string. */
    size_t j = 0; /* Position in the node children (or bytes if compressed).*/
    while (h->size && i < len) {
        debugnode("Lookup current node", h);
        unsigned char *v = h->data;

        if (h->iscompr) {
            for (j = 0; j < h->size && i < len; j++, i++) {
                if (v[j] != s[i]) break;
            }
            if (j != h->size) break;
        } else {
            /* Even when h->size is large, linear scan provides good
             * performances compared to other approaches that are in theory
             * more sounding, like performing a binary search. */
            for (j = 0; j < h->size; j++) {
                if (v[j] == s[i]) break;
            }
            if (j == h->size) break;
            i++;
        }

        if (ts) raxStackPush(ts, h); /* Save stack of parent nodes. */
        raxNode **children = raxNodeFirstChildPtr(h);
        if (h->iscompr) j = 0; /* Compressed node only child is at index 0. */
        memcpy(&h, children + j, sizeof(h));
        parentlink = children + j;
        j = 0; /* If the new node is compressed and we do not
                  iterate again (since i == l) set the split
                  position to 0 to signal this node represents
                  the searched key. */
    }
    debugnode("Lookup stop node is", h);
    if (stopnode) *stopnode = h;
    if (plink) *plink = parentlink;
    if (splitpos && h->iscompr) *splitpos = j;
    return i;
}

/* Insert the element 's' of size 'len', setting as auxiliary data
 * the pointer 'data'. If the element is already present, the associated
 * data is updated (only if 'overwrite' is set to 1), and 0 is returned,
 * otherwise the element is inserted and 1 is returned. On out of memory the
 * function returns 0 as well but sets errno to ENOMEM, otherwise errno will
 * be set to 0.
 */
int raxGenericInsert(rax *rax, unsigned char *s, size_t len, void *data, void **old, int overwrite) {
    size_t i;
    int j = 0; /* Split position. If raxLowWalk() stops in a compressed
                  node, the index 'j' represents the char we stopped within the
                  compressed node, that is, the position where to split the
                  node for insertion. */
    raxNode *h, **parentlink;

    debugf("### Insert %.*s with value %p\n", (int) len, s, data);
    i = raxLowWalk(rax, s, len, &h, &parentlink, &j, NULL);

    /* If i == len we walked following the whole string. If we are not
     * in the middle of a compressed node, the string is either already
     * inserted or this middle node is currently not a key, but can represent
     * our key. We have just to reallocate the node and make space for the
     * data pointer. */
    if (i == len && (!h->iscompr || j == 0 /* not in the middle if j is 0 */)) {
        debugf("### Insert: node representing key exists\n");
        /* Make space for the value pointer if needed. */
        if (!h->iskey || (h->isnull && overwrite)) {
            h = raxReallocForData(h, data);
            if (h) memcpy(parentlink, &h, sizeof(h));
        }
        if (h == NULL) {
            errno = ENOMEM;
            return 0;
        }

        /* Update the existing key if there is already one. */
        if (h->iskey) {
            if (old) *old = raxGetData(h);
            if (overwrite) raxSetData(h, data);
            errno = 0;
            return 0; /* Element already exists. */
        }

        /* Otherwise set the node as a key. Note that raxSetData()
         * will set h->iskey. */
        raxSetData(h, data);
        rax->numele++;
        return 1; /* Element inserted. */
    }

    /* If the node we stopped at is a compressed node, we need to
     * split it before to continue.
     *
     * Splitting a compressed node have a few possibile cases.
     * Imagine that the node 'h' we are currently at is a compressed
     * node contaning the string "ANNIBALE" (it means that it represents
     * nodes A -> N -> N -> I -> B -> A -> L -> E with the only child
     * pointer of this node pointing at the 'E' node, because remember that
     * we have characters at the edges of the graph, not inside the nodes
     * themselves.
     *
     * In order to show a real case imagine our node to also point to
     * another compressed node, that finally points at the node without
     * children, representing 'O':
     *
     *     "ANNIBALE" -> "SCO" -> []
     *
     * When inserting we may face the following cases. Note that all the cases
     * require the insertion of a non compressed node with exactly two
     * children, except for the last case which just requires splitting a
     * compressed node.
     *
     * 1) Inserting "ANNIENTARE"
     *
     *               |B| -> "ALE" -> "SCO" -> []
     *     "ANNI" -> |-|
     *               |E| -> (... continue algo ...) "NTARE" -> []
     *
     * 2) Inserting "ANNIBALI"
     *
     *                  |E| -> "SCO" -> []
     *     "ANNIBAL" -> |-|
     *                  |I| -> (... continue algo ...) []
     *
     * 3) Inserting "AGO" (Like case 1, but set iscompr = 0 into original node)
     *
     *            |N| -> "NIBALE" -> "SCO" -> []
     *     |A| -> |-|
     *            |G| -> (... continue algo ...) |O| -> []
     *
     * 4) Inserting "CIAO"
     *
     *     |A| -> "NNIBALE" -> "SCO" -> []
     *     |-|
     *     |C| -> (... continue algo ...) "IAO" -> []
     *
     * 5) Inserting "ANNI"
     *
     *     "ANNI" -> "BALE" -> "SCO" -> []
     *
     * The final algorithm for insertion covering all the above cases is as
     * follows.
     *
     * ============================= ALGO 1 =============================
     *
     * For the above cases 1 to 4, that is, all cases where we stopped in
     * the middle of a compressed node for a character mismatch, do:
     *
     * Let $SPLITPOS be the zero-based index at which, in the
     * compressed node array of characters, we found the mismatching
     * character. For example if the node contains "ANNIBALE" and we add
     * "ANNIENTARE" the $SPLITPOS is 4, that is, the index at which the
     * mismatching character is found.
     *
     * 1. Save the current compressed node $NEXT pointer (the pointer to the
     *    child element, that is always present in compressed nodes).
     *
     * 2. Create "split node" having as child the non common letter
     *    at the compressed node. The other non common letter (at the key)
     *    will be added later as we continue the normal insertion algorithm
     *    at step "6".
     *
     * 3a. IF $SPLITPOS == 0:
     *     Replace the old node with the split node, by copying the auxiliary
     *     data if any. Fix parent's reference. Free old node eventually
     *     (we still need its data for the next steps of the algorithm).
     *
     * 3b. IF $SPLITPOS != 0:
     *     Trim the compressed node (reallocating it as well) in order to
     *     contain $splitpos characters. Change chilid pointer in order to link
     *     to the split node. If new compressed node len is just 1, set
     *     iscompr to 0 (layout is the same). Fix parent's reference.
     *
     * 4a. IF the postfix len (the length of the remaining string of the
     *     original compressed node after the split character) is non zero,
     *     create a "postfix node". If the postfix node has just one character
     *     set iscompr to 0, otherwise iscompr to 1. Set the postfix node
     *     child pointer to $NEXT.
     *
     * 4b. IF the postfix len is zero, just use $NEXT as postfix pointer.
     *
     * 5. Set child[0] of split node to postfix node.
     *
     * 6. Set the split node as the current node, set current index at child[1]
     *    and continue insertion algorithm as usually.
     *
     * ============================= ALGO 2 =============================
     *
     * For case 5, that is, if we stopped in the middle of a compressed
     * node but no mismatch was found, do:
     *
     * Let $SPLITPOS be the zero-based index at which, in the
     * compressed node array of characters, we stopped iterating because
     * there were no more keys character to match. So in the example of
     * the node "ANNIBALE", addig the string "ANNI", the $SPLITPOS is 4.
     *
     * 1. Save the current compressed node $NEXT pointer (the pointer to the
     *    child element, that is always present in compressed nodes).
     *
     * 2. Create a "postfix node" containing all the characters from $SPLITPOS
     *    to the end. Use $NEXT as the postfix node child pointer.
     *    If the postfix node length is 1, set iscompr to 0.
     *    Set the node as a key with the associated value of the new
     *    inserted key.
     *
     * 3. Trim the current node to contain the first $SPLITPOS characters.
     *    As usually if the new node length is just 1, set iscompr to 0.
     *    Take the iskey / associated value as it was in the orignal node.
     *    Fix the parent's reference.
     *
     * 4. Set the postfix node as the only child pointer of the trimmed
     *    node created at step 1.
     */

    /* ------------------------- ALGORITHM 1 --------------------------- */
    if (h->iscompr && i != len) {
        debugf("ALGO 1: Stopped at compressed node %.*s (%p)\n",
               h->size, h->data, (void *) h);
        debugf("Still to insert: %.*s\n", (int) (len - i), s + i);
        debugf("Splitting at %d: '%c'\n", j, ((char *) h->data)[j]);
        debugf("Other (key) letter is '%c'\n", s[i]);

        /* 1: Save next pointer. */
        raxNode **childfield = raxNodeLastChildPtr(h);
        raxNode *next;
        memcpy(&next, childfield, sizeof(next));
        debugf("Next is %p\n", (void *) next);
        debugf("iskey %d\n", h->iskey);
        if (h->iskey) {
            debugf("key value is %p\n", raxGetData(h));
        }

        /* Set the length of the additional nodes we will need. */
        size_t trimmedlen = j;
        size_t postfixlen = h->size - j - 1;
        int split_node_is_key = !trimmedlen && h->iskey && !h->isnull;
        size_t nodesize;

        /* 2: Create the split node. Also allocate the other nodes we'll need
         *    ASAP, so that it will be simpler to handle OOM. */
        raxNode *splitnode = raxNewNode(1, split_node_is_key);
        raxNode *trimmed = NULL;
        raxNode *postfix = NULL;

        if (trimmedlen) {
            nodesize = sizeof(raxNode) + trimmedlen + sizeof(raxNode *);
            if (h->iskey && !h->isnull) nodesize += sizeof(void *);
            trimmed = rax_malloc(nodesize);
        }

        if (postfixlen) {
            nodesize = sizeof(raxNode) + postfixlen +
                       sizeof(raxNode *);
            postfix = rax_malloc(nodesize);
        }

        /* OOM? Abort now that the tree is untouched. */
        if (splitnode == NULL ||
            (trimmedlen && trimmed == NULL) ||
            (postfixlen && postfix == NULL)) {
            rax_free(splitnode);
            rax_free(trimmed);
            rax_free(postfix);
            errno = ENOMEM;
            return 0;
        }
        splitnode->data[0] = h->data[j];

        if (j == 0) {
            /* 3a: Replace the old node with the split node. */
            if (h->iskey) {
                void *ndata = raxGetData(h);
                raxSetData(splitnode, ndata);
            }
            memcpy(parentlink, &splitnode, sizeof(splitnode));
        } else {
            /* 3b: Trim the compressed node. */
            trimmed->size = j;
            memcpy(trimmed->data, h->data, j);
            trimmed->iscompr = j > 1 ? 1 : 0;
            trimmed->iskey = h->iskey;
            trimmed->isnull = h->isnull;
            if (h->iskey && !h->isnull) {
                void *ndata = raxGetData(h);
                raxSetData(trimmed, ndata);
            }
            raxNode **cp = raxNodeLastChildPtr(trimmed);
            memcpy(cp, &splitnode, sizeof(splitnode));
            memcpy(parentlink, &trimmed, sizeof(trimmed));
            parentlink = cp; /* Set parentlink to splitnode parent. */
            rax->numnodes++;
        }

        /* 4: Create the postfix node: what remains of the original
         * compressed node after the split. */
        if (postfixlen) {
            /* 4a: create a postfix node. */
            postfix->iskey = 0;
            postfix->isnull = 0;
            postfix->size = postfixlen;
            postfix->iscompr = postfixlen > 1;
            memcpy(postfix->data, h->data + j + 1, postfixlen);
            raxNode **cp = raxNodeLastChildPtr(postfix);
            memcpy(cp, &next, sizeof(next));
            rax->numnodes++;
        } else {
            /* 4b: just use next as postfix node. */
            postfix = next;
        }

        /* 5: Set splitnode first child as the postfix node. */
        raxNode **splitchild = raxNodeLastChildPtr(splitnode);
        memcpy(splitchild, &postfix, sizeof(postfix));

        /* 6. Continue insertion: this will cause the splitnode to
         * get a new child (the non common character at the currently
         * inserted key). */
        rax_free(h);
        h = splitnode;
    } else if (h->iscompr && i == len) {
        /* ------------------------- ALGORITHM 2 --------------------------- */
        debugf("ALGO 2: Stopped at compressed node %.*s (%p) j = %d\n",
               h->size, h->data, (void *) h, j);

        /* Allocate postfix & trimmed nodes ASAP to fail for OOM gracefully. */
        size_t postfixlen = h->size - j;
        size_t nodesize = sizeof(raxNode) + postfixlen + sizeof(raxNode *);
        if (data != NULL) nodesize += sizeof(void *);
        raxNode *postfix = rax_malloc(nodesize);

        nodesize = sizeof(raxNode) + j + sizeof(raxNode *);
        if (h->iskey && !h->isnull) nodesize += sizeof(void *);
        raxNode *trimmed = rax_malloc(nodesize);

        if (postfix == NULL || trimmed == NULL) {
            rax_free(postfix);
            rax_free(trimmed);
            errno = ENOMEM;
            return 0;
        }

        /* 1: Save next pointer. */
        raxNode **childfield = raxNodeLastChildPtr(h);
        raxNode *next;
        memcpy(&next, childfield, sizeof(next));

        /* 2: Create the postfix node. */
        postfix->size = postfixlen;
        postfix->iscompr = postfixlen > 1;
        postfix->iskey = 1;
        postfix->isnull = 0;
        memcpy(postfix->data, h->data + j, postfixlen);
        raxSetData(postfix, data);
        raxNode **cp = raxNodeLastChildPtr(postfix);
        memcpy(cp, &next, sizeof(next));
        rax->numnodes++;

        /* 3: Trim the compressed node. */
        trimmed->size = j;
        trimmed->iscompr = j > 1;
        trimmed->iskey = 0;
        trimmed->isnull = 0;
        memcpy(trimmed->data, h->data, j);
        memcpy(parentlink, &trimmed, sizeof(trimmed));
        if (h->iskey) {
            void *aux = raxGetData(h);
            raxSetData(trimmed, aux);
        }

        /* Fix the trimmed node child pointer to point to
         * the postfix node. */
        cp = raxNodeLastChildPtr(trimmed);
        memcpy(cp, &postfix, sizeof(postfix));

        /* Finish! We don't need to contine with the insertion
         * algorithm for ALGO 2. The key is already inserted. */
        rax->numele++;
        rax_free(h);
        return 1; /* Key inserted. */
    }

    /* We walked the radix tree as far as we could, but still there are left
     * chars in our string. We need to insert the missing nodes. */
    while (i < len) {
        raxNode *child;

        /* If this node is going to have a single child, and there
         * are other characters, so that that would result in a chain
         * of single-childed nodes, turn it into a compressed node. */
        if (h->size == 0 && len - i > 1) {
            debugf("Inserting compressed node\n");
            size_t comprsize = len - i;
            if (comprsize > RAX_NODE_MAX_SIZE)
                comprsize = RAX_NODE_MAX_SIZE;
            raxNode *newh = raxCompressNode(h, s + i, comprsize, &child);
            if (newh == NULL) goto oom;
            h = newh;
            memcpy(parentlink, &h, sizeof(h));
            parentlink = raxNodeLastChildPtr(h);
            i += comprsize;
        } else {
            debugf("Inserting normal node\n");
            raxNode **new_parentlink;
            raxNode *newh = raxAddChild(h, s[i], &child, &new_parentlink);
            if (newh == NULL) goto oom;
            h = newh;
            memcpy(parentlink, &h, sizeof(h));
            parentlink = new_parentlink;
            i++;
        }
        rax->numnodes++;
        h = child;
    }
    raxNode *newh = raxReallocForData(h, data);
    if (newh == NULL) goto oom;
    h = newh;
    if (!h->iskey) rax->numele++;
    raxSetData(h, data);
    memcpy(parentlink, &h, sizeof(h));
    return 1; /* Element inserted. */

    oom:
    /* This code path handles out of memory after part of the sub-tree was
     * already modified. Set the node as a key, and then remove it. However we
     * do that only if the node is a terminal node, otherwise if the OOM
     * happened reallocating a node in the middle, we don't need to free
     * anything. */
    if (h->size == 0) {
        h->isnull = 1;
        h->iskey = 1;
        rax->numele++; /* Compensate the next remove. */
        assert(raxRemove(rax, s, i, NULL) != 0);
    }
    errno = ENOMEM;
    return 0;
}

/* Overwriting insert. Just a wrapper for raxGenericInsert() that will
 * update the element if there is already one for the same key. */
int raxInsert(rax *rax, unsigned char *s, size_t len, void *data, void **old) {
    return raxGenericInsert(rax, s, len, data, old, 1);
}

/* Non overwriting insert function: this if an element with the same key
 * exists, the value is not updated and the function returns 0.
 * This is a just a wrapper for raxGenericInsert(). */
int raxTryInsert(rax *rax, unsigned char *s, size_t len, void *data, void **old) {
    return raxGenericInsert(rax, s, len, data, old, 0);
}

/* Find a key in the rax, returns raxNotFound special void pointer value
 * if the item was not found, otherwise the value associated with the
 * item is returned. */
void *raxFind(rax *rax, unsigned char *s, size_t len) {
    raxNode *h;

    debugf("### Lookup: %.*s\n", (int) len, s);
    int splitpos = 0;
    size_t i = raxLowWalk(rax, s, len, &h, NULL, &splitpos, NULL);
    if (i != len || (h->iscompr && splitpos != 0) || !h->iskey)
        return raxNotFound;
    return raxGetData(h);
}



/* Return the memory address where the 'parent' node stores the specified
 * 'child' pointer, so that the caller can update the pointer with another
 * one if needed. The function assumes it will find a match, otherwise the
 * operation is an undefined behavior (it will continue scanning the
 * memory without any bound checking). */
raxNode **raxFindParentLink(raxNode *parent, raxNode *child) {
    raxNode **cp = raxNodeFirstChildPtr(parent);
    raxNode *c;
    while (1) {
        memcpy(&c, cp, sizeof(c));
        if (c == child) break;
        cp++;
    }
    return cp;
}

/* Low level child removal from node. The new node pointer (after the child
 * removal) is returned. Note that this function does not fix the pointer
 * of the parent node in its parent, so this task is up to the caller.
 * The function never fails for out of memory. */
raxNode *raxRemoveChild(raxNode *parent, raxNode *child) {
    debugnode("raxRemoveChild before", parent);
    /* If parent is a compressed node (having a single child, as for definition
     * of the data structure), the removal of the child consists into turning
     * it into a normal node without children. */
    if (parent->iscompr) {
        void *data = NULL;
        if (parent->iskey) data = raxGetData(parent);
        parent->isnull = 0;
        parent->iscompr = 0;
        parent->size = 0;
        if (parent->iskey) raxSetData(parent, data);
        debugnode("raxRemoveChild after", parent);
        return parent;
    }

    /* Otherwise we need to scan for the children pointer and memmove()
     * accordingly.
     *
     * 1. To start we seek the first element in both the children
     *    pointers and edge bytes in the node. */
    raxNode **cp = raxNodeFirstChildPtr(parent);
    raxNode **c = cp;
    unsigned char *e = parent->data;

    /* 2. Search the child pointer to remove inside the array of children
     *    pointers. */
    while (1) {
        raxNode *aux;
        memcpy(&aux, c, sizeof(aux));
        if (aux == child) break;
        c++;
        e++;
    }

    /* 3. Remove the edge and the pointer by memmoving the remaining children
     *    pointer and edge bytes one position before. */
    int taillen = parent->size - (e - parent->data) - 1;
    debugf("raxRemoveChild tail len: %d\n", taillen);
    memmove(e, e + 1, taillen);

    /* Since we have one data byte less, also child pointers start one byte
     * before now. */
    memmove(((char *) cp) - 1, cp, (parent->size - taillen - 1) * sizeof(raxNode **));

    /* Move the remaining "tail" pointer at the right position as well. */
    size_t valuelen = (parent->iskey && !parent->isnull) ? sizeof(void *) : 0;
    memmove(((char *) c) - 1, c + 1, taillen * sizeof(raxNode **) + valuelen);

    /* 4. Update size. */
    parent->size--;

    /* realloc the node according to the theoretical memory usage, to free
     * data if we are over-allocating right now. */
    raxNode *newnode = rax_realloc(parent, raxNodeCurrentLength(parent));
    if (newnode) {
        debugnode("raxRemoveChild after", newnode);
    }
    /* Note: if rax_realloc() fails we just return the old address, which
     * is valid. */
    return newnode ? newnode : parent;
}

/* Remove the specified item. Returns 1 if the item was found and
 * deleted, 0 otherwise. */
int raxRemove(rax *rax, unsigned char *s, size_t len, void **old) {
    raxNode *h;
    raxStack ts;

    debugf("### Delete: %.*s\n", (int) len, s);
    raxStackInit(&ts);
    int splitpos = 0;
    size_t i = raxLowWalk(rax, s, len, &h, NULL, &splitpos, &ts);
    if (i != len || (h->iscompr && splitpos != 0) || !h->iskey) {
        raxStackFree(&ts);
        return 0;
    }
    if (old) *old = raxGetData(h);
    h->iskey = 0;
    rax->numele--;

    /* If this node has no children, the deletion needs to reclaim the
     * no longer used nodes. This is an iterative process that needs to
     * walk the three upward, deleting all the nodes with just one child
     * that are not keys, until the head of the rax is reached or the first
     * node with more than one child is found. */

    int trycompress = 0; /* Will be set to 1 if we should try to optimize the
                            tree resulting from the deletion. */

    if (h->size == 0) {
        debugf("Key deleted in node without children. Cleanup needed.\n");
        raxNode *child = NULL;
        while (h != rax->head) {
            child = h;
            debugf("Freeing child %p [%.*s] key:%d\n", (void *) child,
                   (int) child->size, (char *) child->data, child->iskey);
            rax_free(child);
            rax->numnodes--;
            h = raxStackPop(&ts);
            /* If this node has more then one child, or actually holds
             * a key, stop here. */
            if (h->iskey || (!h->iscompr && h->size != 1)) break;
        }
        if (child) {
            debugf("Unlinking child %p from parent %p\n",
                   (void *) child, (void *) h);
            raxNode *
            new = raxRemoveChild(h, child);
            if (new != h) {
                raxNode *parent = raxStackPeek(&ts);
                raxNode **parentlink;
                if (parent == NULL) {
                    parentlink = &rax->head;
                } else {
                    parentlink = raxFindParentLink(parent, h);
                }
                memcpy(parentlink, &new, sizeof(new));
            }

            /* If after the removal the node has just a single child
             * and is not a key, we need to try to compress it. */
            if (new->size == 1 && new->iskey == 0) {
                trycompress = 1;
                h = new;
            }
        }
    } else if (h->size == 1) {
        /* If the node had just one child, after the removal of the key
         * further compression with adjacent nodes is pontentially possible. */
        trycompress = 1;
    }

    /* Don't try node compression if our nodes pointers stack is not
     * complete because of OOM while executing raxLowWalk() */
    if (trycompress && ts.oom) trycompress = 0;

    /* Recompression: if trycompress is true, 'h' points to a radix tree node
     * that changed in a way that could allow to compress nodes in this
     * sub-branch. Compressed nodes represent chains of nodes that are not
     * keys and have a single child, so there are two deletion events that
     * may alter the tree so that further compression is needed:
     *
     * 1) A node with a single child was a key and now no longer is a key.
     * 2) A node with two children now has just one child.
     *
     * We try to navigate upward till there are other nodes that can be
     * compressed, when we reach the upper node which is not a key and has
     * a single child, we scan the chain of children to collect the
     * compressable part of the tree, and replace the current node with the
     * new one, fixing the child pointer to reference the first non
     * compressable node.
     *
     * Example of case "1". A tree stores the keys "FOO" = 1 and
     * "FOOBAR" = 2:
     *
     *
     * "FOO" -> "BAR" -> [] (2)
     *           (1)
     *
     * After the removal of "FOO" the tree can be compressed as:
     *
     * "FOOBAR" -> [] (2)
     *
     *
     * Example of case "2". A tree stores the keys "FOOBAR" = 1 and
     * "FOOTER" = 2:
     *
     *          |B| -> "AR" -> [] (1)
     * "FOO" -> |-|
     *          |T| -> "ER" -> [] (2)
     *
     * After the removal of "FOOTER" the resulting tree is:
     *
     * "FOO" -> |B| -> "AR" -> [] (1)
     *
     * That can be compressed into:
     *
     * "FOOBAR" -> [] (1)
     */
    if (trycompress) {
        debugf("After removing %.*s:\n", (int) len, s);
        debugnode("Compression may be needed", h);
        debugf("Seek start node\n");

        /* Try to reach the upper node that is compressible.
         * At the end of the loop 'h' will point to the first node we
         * can try to compress and 'parent' to its parent. */
        raxNode *parent;
        while (1) {
            parent = raxStackPop(&ts);
            if (!parent || parent->iskey ||
                (!parent->iscompr && parent->size != 1))
                break;
            h = parent;
            debugnode("Going up to", h);
        }
        raxNode *start = h; /* Compression starting node. */

        /* Scan chain of nodes we can compress. */
        size_t comprsize = h->size;
        int nodes = 1;
        while (h->size != 0) {
            raxNode **cp = raxNodeLastChildPtr(h);
            memcpy(&h, cp, sizeof(h));
            if (h->iskey || (!h->iscompr && h->size != 1)) break;
            /* Stop here if going to the next node would result into
             * a compressed node larger than h->size can hold. */
            if (comprsize + h->size > RAX_NODE_MAX_SIZE) break;
            nodes++;
            comprsize += h->size;
        }
        if (nodes > 1) {
            /* If we can compress, create the new node and populate it. */
            size_t nodesize =
                    sizeof(raxNode) + comprsize + sizeof(raxNode *);
            raxNode *
            new = rax_malloc(nodesize);
            /* An out of memory here just means we cannot optimize this
             * node, but the tree is left in a consistent state. */
            if (new == NULL) {
                raxStackFree(&ts);
                return 1;
            }
            new->iskey = 0;
            new->isnull = 0;
            new->iscompr = 1;
            new->size = comprsize;
            rax->numnodes++;

            /* Scan again, this time to populate the new node content and
             * to fix the new node child pointer. At the same time we free
             * all the nodes that we'll no longer use. */
            comprsize = 0;
            h = start;
            while (h->size != 0) {
                memcpy(new->data + comprsize, h->data, h->size);
                comprsize += h->size;
                raxNode **cp = raxNodeLastChildPtr(h);
                raxNode *tofree = h;
                memcpy(&h, cp, sizeof(h));
                rax_free(tofree);
                rax->numnodes--;
                if (h->iskey || (!h->iscompr && h->size != 1)) break;
            }
            debugnode("New node", new);

            /* Now 'h' points to the first node that we still need to use,
             * so our new node child pointer will point to it. */
            raxNode **cp = raxNodeLastChildPtr(new);
            memcpy(cp, &h, sizeof(h));

            /* Fix parent link. */
            if (parent) {
                raxNode **parentlink = raxFindParentLink(parent, start);
                memcpy(parentlink, &new, sizeof(new));
            } else {
                rax->head = new;
            }

            debugf("Compressed %d nodes, %d total bytes\n",
                   nodes, (int) comprsize);
        }
    }
    raxStackFree(&ts);
    return 1;
}

/* This is the core of raxFree(): performs a depth-first scan of the
 * tree and releases all the nodes found. */
void raxRecursiveFree(rax *rax, raxNode *n, void (*free_callback)(void *)) {
    debugnode("free traversing", n);
    int numchildren = n->iscompr ? 1 : n->size;
    raxNode **cp = raxNodeLastChildPtr(n);
    while (numchildren--) {
        raxNode *child;
        memcpy(&child, cp, sizeof(child));
        raxRecursiveFree(rax, child, free_callback);
        cp--;
    }
    debugnode("free depth-first", n);
    if (free_callback && n->iskey && !n->isnull)
        free_callback(raxGetData(n));
    rax_free(n);
    rax->numnodes--;
}

/* Free a whole radix tree, calling the specified callback in order to
 * free the auxiliary data. */
void raxFreeWithCallback(rax *rax, void (*free_callback)(void *)) {
    raxRecursiveFree(rax, rax->head, free_callback);
    assert(rax->numnodes == 0);
    rax_free(rax);
}

/* Free a whole radix tree. */
void raxFree(rax *rax) {
    raxFreeWithCallback(rax, NULL);
}

/* ------------------------------- Iterator --------------------------------- */


/* Initialize a Rax iterator. This call should be performed a single time
 * to initialize the iterator, and must be followed by a raxSeek() call,
 * otherwise the raxPrev()/raxNext() functions will just return EOF. */
void raxStart(raxIterator *it, rax *rt) {
    it->flags = RAX_ITER_EOF; /* No crash if the iterator is not seeked. */
    it->rt = rt;
    it->key_len = 0;
    it->key = it->key_static_string;
    it->key_max = RAX_ITER_STATIC_LEN;
    it->data = NULL;
    it->node_cb = NULL;
    raxStackInit(&it->stack);
}

/* Append characters at the current key string of the iterator 'it'. This
 * is a low level function used to implement the iterator, not callable by
 * the user. Returns 0 on out of memory, otherwise 1 is returned. */
int raxIteratorAddChars(raxIterator *it, unsigned char *s, size_t len) {
    if (it->key_max < it->key_len + len) {
        unsigned char *old = (it->key == it->key_static_string) ? NULL :
                             it->key;
        size_t new_max = (it->key_len + len) * 2;
        it->key = rax_realloc(old, new_max);
        if (it->key == NULL) {
            it->key = (!old) ? it->key_static_string : old;
            errno = ENOMEM;
            return 0;
        }
        if (old == NULL) memcpy(it->key, it->key_static_string, it->key_len);
        it->key_max = new_max;
    }
    /* Use memmove since there could be an overlap between 's' and
     * it->key when we use the current key in order to re-seek. */
    memmove(it->key + it->key_len, s, len);
    it->key_len += len;
    return 1;
}

/* Remove the specified number of chars from the right of the current
 * iterator key. */
void raxIteratorDelChars(raxIterator *it, size_t count) {
    it->key_len -= count;
}

/* Do an iteration step towards the next element. At the end of the step the
 * iterator key will represent the (new) current key. If it is not possible
 * to step in the specified direction since there are no longer elements, the
 * iterator is flagged with RAX_ITER_EOF.
 *
 * If 'noup' is true the function starts directly scanning for the next
 * lexicographically smaller children, and the current node is already assumed
 * to be the parent of the last key node, so the first operation to go back to
 * the parent will be skipped. This option is used by raxSeek() when
 * implementing seeking a non existing element with the ">" or "<" options:
 * the starting node is not a key in that particular case, so we start the scan
 * from a node that does not represent the key set.
 *
 * The function returns 1 on success or 0 on out of memory. */
int raxIteratorNextStep(raxIterator *it, int noup) {
    if (it->flags & RAX_ITER_EOF) {
        return 1;
    } else if (it->flags & RAX_ITER_JUST_SEEKED) {
        it->flags &= ~RAX_ITER_JUST_SEEKED;
        return 1;
    }

    /* Save key len, stack items and the node where we are currently
     * so that on iterator EOF we can restore the current key and state. */
    size_t orig_key_len = it->key_len;
    size_t orig_stack_items = it->stack.items;
    raxNode *orig_node = it->node;

    while (1) {
        int children = it->node->iscompr ? 1 : it->node->size;
        if (!noup && children) {
            debugf("GO DEEPER\n");
            /* Seek the lexicographically smaller key in this subtree, which
             * is the first one found always going torwards the first child
             * of every successive node. */
            if (!raxStackPush(&it->stack, it->node)) return 0;
            raxNode **cp = raxNodeFirstChildPtr(it->node);
            if (!raxIteratorAddChars(it, it->node->data,
                                     it->node->iscompr ? it->node->size : 1))
                return 0;
            memcpy(&it->node, cp, sizeof(it->node));
            /* Call the node callback if any, and replace the node pointer
             * if the callback returns true. */
            if (it->node_cb && it->node_cb(&it->node))
                memcpy(cp, &it->node, sizeof(it->node));
            /* For "next" step, stop every time we find a key along the
             * way, since the key is lexicograhically smaller compared to
             * what follows in the sub-children. */
            if (it->node->iskey) {
                it->data = raxGetData(it->node);
                return 1;
            }
        } else {
            /* If we finished exporing the previous sub-tree, switch to the
             * new one: go upper until a node is found where there are
             * children representing keys lexicographically greater than the
             * current key. */
            while (1) {
                int old_noup = noup;

                /* Already on head? Can't go up, iteration finished. */
                if (!noup && it->node == it->rt->head) {
                    it->flags |= RAX_ITER_EOF;
                    it->stack.items = orig_stack_items;
                    it->key_len = orig_key_len;
                    it->node = orig_node;
                    return 1;
                }
                /* If there are no children at the current node, try parent's
                 * next child. */
                unsigned char prevchild = it->key[it->key_len - 1];
                if (!noup) {
                    it->node = raxStackPop(&it->stack);
                } else {
                    noup = 0;
                }
                /* Adjust the current key to represent the node we are
                 * at. */
                int todel = it->node->iscompr ? it->node->size : 1;
                raxIteratorDelChars(it, todel);

                /* Try visiting the next child if there was at least one
                 * additional child. */
                if (!it->node->iscompr && it->node->size > (old_noup ? 0 : 1)) {
                    raxNode **cp = raxNodeFirstChildPtr(it->node);
                    int i = 0;
                    while (i < it->node->size) {
                        debugf("SCAN NEXT %c\n", it->node->data[i]);
                        if (it->node->data[i] > prevchild) break;
                        i++;
                        cp++;
                    }
                    if (i != it->node->size) {
                        debugf("SCAN found a new node\n");
                        raxIteratorAddChars(it, it->node->data + i, 1);
                        if (!raxStackPush(&it->stack, it->node)) return 0;
                        memcpy(&it->node, cp, sizeof(it->node));
                        /* Call the node callback if any, and replace the node
                         * pointer if the callback returns true. */
                        if (it->node_cb && it->node_cb(&it->node))
                            memcpy(cp, &it->node, sizeof(it->node));
                        if (it->node->iskey) {
                            it->data = raxGetData(it->node);
                            return 1;
                        }
                        break;
                    }
                }
            }
        }
    }
}

/* Seek the grestest key in the subtree at the current node. Return 0 on
 * out of memory, otherwise 1. This is an helper function for different
 * iteration functions below. */
int raxSeekGreatest(raxIterator *it) {
    while (it->node->size) {
        if (it->node->iscompr) {
            if (!raxIteratorAddChars(it, it->node->data,
                                     it->node->size))
                return 0;
        } else {
            if (!raxIteratorAddChars(it, it->node->data + it->node->size - 1, 1))
                return 0;
        }
        raxNode **cp = raxNodeLastChildPtr(it->node);
        if (!raxStackPush(&it->stack, it->node)) return 0;
        memcpy(&it->node, cp, sizeof(it->node));
    }
    return 1;
}

/* Like raxIteratorNextStep() but implements an iteration step moving
 * to the lexicographically previous element. The 'noup' option has a similar
 * effect to the one of raxIteratorNextStep(). */
int raxIteratorPrevStep(raxIterator *it, int noup) {
    if (it->flags & RAX_ITER_EOF) {
        return 1;
    } else if (it->flags & RAX_ITER_JUST_SEEKED) {
        it->flags &= ~RAX_ITER_JUST_SEEKED;
        return 1;
    }

    /* Save key len, stack items and the node where we are currently
     * so that on iterator EOF we can restore the current key and state. */
    size_t orig_key_len = it->key_len;
    size_t orig_stack_items = it->stack.items;
    raxNode *orig_node = it->node;

    while (1) {
        int old_noup = noup;

        /* Already on head? Can't go up, iteration finished. */
        if (!noup && it->node == it->rt->head) {
            it->flags |= RAX_ITER_EOF;
            it->stack.items = orig_stack_items;
            it->key_len = orig_key_len;
            it->node = orig_node;
            return 1;
        }

        unsigned char prevchild = it->key[it->key_len - 1];
        if (!noup) {
            it->node = raxStackPop(&it->stack);
        } else {
            noup = 0;
        }

        /* Adjust the current key to represent the node we are
         * at. */
        int todel = it->node->iscompr ? it->node->size : 1;
        raxIteratorDelChars(it, todel);

        /* Try visiting the prev child if there is at least one
         * child. */
        if (!it->node->iscompr && it->node->size > (old_noup ? 0 : 1)) {
            raxNode **cp = raxNodeLastChildPtr(it->node);
            int i = it->node->size - 1;
            while (i >= 0) {
                debugf("SCAN PREV %c\n", it->node->data[i]);
                if (it->node->data[i] < prevchild) break;
                i--;
                cp--;
            }
            /* If we found a new subtree to explore in this node,
             * go deeper following all the last children in order to
             * find the key lexicographically greater. */
            if (i != -1) {
                debugf("SCAN found a new node\n");
                /* Enter the node we just found. */
                if (!raxIteratorAddChars(it, it->node->data + i, 1)) return 0;
                if (!raxStackPush(&it->stack, it->node)) return 0;
                memcpy(&it->node, cp, sizeof(it->node));
                /* Seek sub-tree max. */
                if (!raxSeekGreatest(it)) return 0;
            }
        }

        /* Return the key: this could be the key we found scanning a new
         * subtree, or if we did not find a new subtree to explore here,
         * before giving up with this node, check if it's a key itself. */
        if (it->node->iskey) {
            it->data = raxGetData(it->node);
            return 1;
        }
    }
}

/* Seek an iterator at the specified element.
 * Return 0 if the seek failed for syntax error or out of memory. Otherwise
 * 1 is returned. When 0 is returned for out of memory, errno is set to
 * the ENOMEM value. */
int raxSeek(raxIterator *it, const char *op, unsigned char *ele, size_t len) {
    int eq = 0, lt = 0, gt = 0, first = 0, last = 0;

    it->stack.items = 0; /* Just resetting. Intialized by raxStart(). */
    it->flags |= RAX_ITER_JUST_SEEKED;
    it->flags &= ~RAX_ITER_EOF;
    it->key_len = 0;
    it->node = NULL;

    /* Set flags according to the operator used to perform the seek. */
    if (op[0] == '>') {
        gt = 1;
        if (op[1] == '=') eq = 1;
    } else if (op[0] == '<') {
        lt = 1;
        if (op[1] == '=') eq = 1;
    } else if (op[0] == '=') {
        eq = 1;
    } else if (op[0] == '^') {
        first = 1;
    } else if (op[0] == '$') {
        last = 1;
    } else {
        errno = 0;
        return 0; /* Error. */
    }

    /* If there are no elements, set the EOF condition immediately and
     * return. */
    if (it->rt->numele == 0) {
        it->flags |= RAX_ITER_EOF;
        return 1;
    }

    if (first) {
        /* Seeking the first key greater or equal to the empty string
         * is equivalent to seeking the smaller key available. */
        return raxSeek(it, ">=", NULL, 0);
    }

    if (last) {
        /* Find the greatest key taking always the last child till a
         * final node is found. */
        it->node = it->rt->head;
        if (!raxSeekGreatest(it)) return 0;
        assert(it->node->iskey);
        it->data = raxGetData(it->node);
        return 1;
    }

    /* We need to seek the specified key. What we do here is to actually
     * perform a lookup, and later invoke the prev/next key code that
     * we already use for iteration. */
    int splitpos = 0;
    size_t i = raxLowWalk(it->rt, ele, len, &it->node, NULL, &splitpos, &it->stack);

    /* Return OOM on incomplete stack info. */
    if (it->stack.oom) return 0;

    if (eq && i == len && (!it->node->iscompr || splitpos == 0) &&
        it->node->iskey) {
        /* We found our node, since the key matches and we have an
         * "equal" condition. */
        if (!raxIteratorAddChars(it, ele, len)) return 0; /* OOM. */
        it->data = raxGetData(it->node);
    } else if (lt || gt) {
        /* Exact key not found or eq flag not set. We have to set as current
         * key the one represented by the node we stopped at, and perform
         * a next/prev operation to seek. To reconstruct the key at this node
         * we start from the parent and go to the current node, accumulating
         * the characters found along the way. */
        if (!raxStackPush(&it->stack, it->node)) return 0;
        for (size_t j = 1; j < it->stack.items; j++) {
            raxNode *parent = it->stack.stack[j - 1];
            raxNode *child = it->stack.stack[j];
            if (parent->iscompr) {
                if (!raxIteratorAddChars(it, parent->data, parent->size))
                    return 0;
            } else {
                raxNode **cp = raxNodeFirstChildPtr(parent);
                unsigned char *p = parent->data;
                while (1) {
                    raxNode *aux;
                    memcpy(&aux, cp, sizeof(aux));
                    if (aux == child) break;
                    cp++;
                    p++;
                }
                if (!raxIteratorAddChars(it, p, 1)) return 0;
            }
        }
        raxStackPop(&it->stack);

        /* We need to set the iterator in the correct state to call next/prev
         * step in order to seek the desired element. */
        debugf("After initial seek: i=%d len=%d key=%.*s\n",
               (int) i, (int) len, (int) it->key_len, it->key);
        if (i != len && !it->node->iscompr) {
            /* If we stopped in the middle of a normal node because of a
             * mismatch, add the mismatching character to the current key
             * and call the iterator with the 'noup' flag so that it will try
             * to seek the next/prev child in the current node directly based
             * on the mismatching character. */
            if (!raxIteratorAddChars(it, ele + i, 1)) return 0;
            debugf("Seek normal node on mismatch: %.*s\n",
                   (int) it->key_len, (char *) it->key);

            it->flags &= ~RAX_ITER_JUST_SEEKED;
            if (lt && !raxIteratorPrevStep(it, 1)) return 0;
            if (gt && !raxIteratorNextStep(it, 1)) return 0;
            it->flags |= RAX_ITER_JUST_SEEKED; /* Ignore next call. */
        } else if (i != len && it->node->iscompr) {
            debugf("Compressed mismatch: %.*s\n",
                   (int) it->key_len, (char *) it->key);
            /* In case of a mismatch within a compressed node. */
            int nodechar = it->node->data[splitpos];
            int keychar = ele[i];
            it->flags &= ~RAX_ITER_JUST_SEEKED;
            if (gt) {
                /* If the key the compressed node represents is greater
                 * than our seek element, continue forward, otherwise set the
                 * state in order to go back to the next sub-tree. */
                if (nodechar > keychar) {
                    if (!raxIteratorNextStep(it, 0)) return 0;
                } else {
                    if (!raxIteratorAddChars(it, it->node->data, it->node->size))
                        return 0;
                    if (!raxIteratorNextStep(it, 1)) return 0;
                }
            }
            if (lt) {
                /* If the key the compressed node represents is smaller
                 * than our seek element, seek the greater key in this
                 * subtree, otherwise set the state in order to go back to
                 * the previous sub-tree. */
                if (nodechar < keychar) {
                    if (!raxSeekGreatest(it)) return 0;
                    it->data = raxGetData(it->node);
                } else {
                    if (!raxIteratorAddChars(it, it->node->data, it->node->size))
                        return 0;
                    if (!raxIteratorPrevStep(it, 1)) return 0;
                }
            }
            it->flags |= RAX_ITER_JUST_SEEKED; /* Ignore next call. */
        } else {
            debugf("No mismatch: %.*s\n",
                   (int) it->key_len, (char *) it->key);
            /* If there was no mismatch we are into a node representing the
             * key, (but which is not a key or the seek operator does not
             * include 'eq'), or we stopped in the middle of a compressed node
             * after processing all the key. Continue iterating as this was
             * a legitimate key we stopped at. */
            it->flags &= ~RAX_ITER_JUST_SEEKED;
            if (it->node->iscompr && it->node->iskey && splitpos && lt) {
                /* If we stopped in the middle of a compressed node with
                 * perfect match, and the condition is to seek a key "<" than
                 * the specified one, then if this node is a key it already
                 * represents our match. For instance we may have nodes:
                 *
                 * "f" -> "oobar" = 1 -> "" = 2
                 *
                 * Representing keys "f" = 1, "foobar" = 2. A seek for
                 * the key < "foo" will stop in the middle of the "oobar"
                 * node, but will be our match, representing the key "f".
                 *
                 * So in that case, we don't seek backward. */
            } else {
                if (gt && !raxIteratorNextStep(it, 0)) return 0;
                if (lt && !raxIteratorPrevStep(it, 0)) return 0;
            }
            it->flags |= RAX_ITER_JUST_SEEKED; /* Ignore next call. */
        }
    } else {
        /* If we are here just eq was set but no match was found. */
        it->flags |= RAX_ITER_EOF;
        return 1;
    }
    return 1;
}

/* Go to the next element in the scope of the iterator 'it'.
 * If EOF (or out of memory) is reached, 0 is returned, otherwise 1 is
 * returned. In case 0 is returned because of OOM, errno is set to ENOMEM. */
int raxNext(raxIterator *it) {
    if (!raxIteratorNextStep(it, 0)) {
        errno = ENOMEM;
        return 0;
    }
    if (it->flags & RAX_ITER_EOF) {
        errno = 0;
        return 0;
    }
    return 1;
}

/* Go to the previous element in the scope of the iterator 'it'.
 * If EOF (or out of memory) is reached, 0 is returned, otherwise 1 is
 * returned. In case 0 is returned because of OOM, errno is set to ENOMEM. */
int raxPrev(raxIterator *it) {
    if (!raxIteratorPrevStep(it, 0)) {
        errno = ENOMEM;
        return 0;
    }
    if (it->flags & RAX_ITER_EOF) {
        errno = 0;
        return 0;
    }
    return 1;
}

/* Perform a random walk starting in the current position of the iterator.
 * Return 0 if the tree is empty or on out of memory. Otherwise 1 is returned
 * and the iterator is set to the node reached after doing a random walk
 * of 'steps' steps. If the 'steps' argument is 0, the random walk is performed
 * using a random number of steps between 1 and two times the logarithm of
 * the number of elements.
 *
 * NOTE: if you use this function to generate random elements from the radix
 * tree, expect a disappointing distribution. A random walk produces good
 * random elements if the tree is not sparse, however in the case of a radix
 * tree certain keys will be reported much more often than others. At least
 * this function should be able to expore every possible element eventually. */
int raxRandomWalk(raxIterator *it, size_t steps) {
    if (it->rt->numele == 0) {
        it->flags |= RAX_ITER_EOF;
        return 0;
    }

    if (steps == 0) {
        size_t fle = floor(log(it->rt->numele));
        fle *= 2;
        steps = 1 + rand() % fle;
    }

    raxNode *n = it->node;
    while (steps > 0 || !n->iskey) {
        int numchildren = n->iscompr ? 1 : n->size;
        int r = rand() % (numchildren + (n != it->rt->head));

        if (r == numchildren) {
            /* Go up to parent. */
            n = raxStackPop(&it->stack);
            int todel = n->iscompr ? n->size : 1;
            raxIteratorDelChars(it, todel);
        } else {
            /* Select a random child. */
            if (n->iscompr) {
                if (!raxIteratorAddChars(it, n->data, n->size)) return 0;
            } else {
                if (!raxIteratorAddChars(it, n->data + r, 1)) return 0;
            }
            raxNode **cp = raxNodeFirstChildPtr(n) + r;
            if (!raxStackPush(&it->stack, n)) return 0;
            memcpy(&n, cp, sizeof(n));
        }
        if (n->iskey) steps--;
    }
    it->node = n;
    return 1;
}

/* Compare the key currently pointed by the iterator to the specified
 * key according to the specified operator. Returns 1 if the comparison is
 * true, otherwise 0 is returned. */
int raxCompare(raxIterator *iter, const char *op, unsigned char *key, size_t key_len) {
    int eq = 0, lt = 0, gt = 0;

    if (op[0] == '=' || op[1] == '=') eq = 1;
    if (op[0] == '>') gt = 1;
    else if (op[0] == '<') lt = 1;
    else if (op[1] != '=') return 0; /* Syntax error. */

    size_t minlen = key_len < iter->key_len ? key_len : iter->key_len;
    int cmp = memcmp(iter->key, key, minlen);

    /* Handle == */
    if (lt == 0 && gt == 0) return cmp == 0 && key_len == iter->key_len;

    /* Handle >, >=, <, <= */
    if (cmp == 0) {
        /* Same prefix: longer wins. */
        if (eq && key_len == iter->key_len) return 1;
        else if (lt) return iter->key_len < key_len;
        else if (gt) return iter->key_len > key_len;
    }
    if (cmp > 0) {
        return gt ? 1 : 0;
    } else /* (cmp < 0) */ {
        return lt ? 1 : 0;
    }
}

/* Free the iterator. */
void raxStop(raxIterator *it) {
    if (it->key != it->key_static_string) rax_free(it->key);
    raxStackFree(&it->stack);
}

/* Return if the iterator is in an EOF state. This happens when raxSeek()
 * failed to seek an appropriate element, so that raxNext() or raxPrev()
 * will return zero, or when an EOF condition was reached while iterating
 * with raxNext() and raxPrev(). */
int raxEOF(raxIterator *it) {
    return it->flags & RAX_ITER_EOF;
}

/* Return the number of elements inside the radix tree. */
uint64_t raxSize(rax *rax) {
    return rax->numele;
}

/* ----------------------------- Introspection ------------------------------ */

/* This function is mostly used for debugging and learning purposes.
 * It shows an ASCII representation of a tree on standard output, outling
 * all the nodes and the contained keys.
 *
 * The representation is as follow:
 *
 *  "foobar" (compressed node)
 *  [abc] (normal node with three children)
 *  [abc]=0x12345678 (node is a key, pointing to value 0x12345678)
 *  [] (a normal empty node)
 *
 *  Children are represented in new idented lines, each children prefixed by
 *  the "`-(x)" string, where "x" is the edge byte.
 *
 *  [abc]
 *   `-(a) "ladin"
 *   `-(b) [kj]
 *   `-(c) []
 *
 *  However when a node has a single child the following representation
 *  is used instead:
 *
 *  [abc] -> "ladin" -> []
 */

/* The actual implementation of raxShow(). */
void raxRecursiveShow(int level, int lpad, raxNode *n) {
    char s = n->iscompr ? '"' : '[';
    char e = n->iscompr ? '"' : ']';

    int numchars = printf("%c%.*s%c", s, n->size, n->data, e);
    if (n->iskey) {
        numchars += printf("=%p", raxGetData(n));
    }

    int numchildren = n->iscompr ? 1 : n->size;
    /* Note that 7 and 4 magic constants are the string length
     * of " `-(x) " and " -> " respectively. */
    if (level) {
        lpad += (numchildren > 1) ? 7 : 4;
        if (numchildren == 1) lpad += numchars;
    }
    raxNode **cp = raxNodeFirstChildPtr(n);
    for (int i = 0; i < numchildren; i++) {
        char *branch = " `-(%c) ";
        if (numchildren > 1) {
            printf("\n");
            for (int j = 0; j < lpad; j++) putchar(' ');
            printf(branch, n->data[i]);
        } else {
            printf(" -> ");
        }
        raxNode *child;
        memcpy(&child, cp, sizeof(child));
        raxRecursiveShow(level + 1, lpad, child);
        cp++;
    }
}

/* Show a tree, as outlined in the comment above. */
void raxShow(rax *rax) {
    raxRecursiveShow(0, 0, rax->head);
    putchar('\n');
}

/* Used by debugnode() macro to show info about a given node. */
void raxDebugShowNode(const char *msg, raxNode *n) {
    printf("%s: %p [%.*s] key:%d size:%d children:",
           msg, (void *) n, (int) n->size, (char *) n->data, n->iskey, n->size);
    int numcld = n->iscompr ? 1 : n->size;
    raxNode **cldptr = raxNodeLastChildPtr(n) - (numcld - 1);
    while (numcld--) {
        raxNode *child;
        memcpy(&child, cldptr, sizeof(child));
        cldptr++;
        printf("%p ", (void *) child);
    }
    printf("\n");
    fflush(stdout);
}