[−][src]Struct rapier3d::geometry::HeightFieldCellStatus
The status of the cell of an heightfield.
Implementations
impl HeightFieldCellStatus
[src]
pub const ZIGZAG_SUBDIVISION: HeightFieldCellStatus
[src]
If this bit is set, the concerned heightfield cell is subdivided using a Z pattern.
pub const LEFT_TRIANGLE_REMOVED: HeightFieldCellStatus
[src]
If this bit is set, the leftmost triangle of the concerned heightfield cell is removed.
pub const RIGHT_TRIANGLE_REMOVED: HeightFieldCellStatus
[src]
If this bit is set, the rightmost triangle of the concerned heightfield cell is removed.
pub const CELL_REMOVED: HeightFieldCellStatus
[src]
If this bit is set, both triangles of the concerned heightfield cell are removed.
pub const fn empty() -> HeightFieldCellStatus
[src]
Returns an empty set of flags
pub const fn all() -> HeightFieldCellStatus
[src]
Returns the set containing all flags.
pub const fn bits(&self) -> u8
[src]
Returns the raw value of the flags currently stored.
pub fn from_bits(bits: u8) -> Option<HeightFieldCellStatus>
[src]
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
pub const fn from_bits_truncate(bits: u8) -> HeightFieldCellStatus
[src]
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
pub const unsafe fn from_bits_unchecked(bits: u8) -> HeightFieldCellStatus
[src]
Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).
pub const fn is_empty(&self) -> bool
[src]
Returns true
if no flags are currently stored.
pub const fn is_all(&self) -> bool
[src]
Returns true
if all flags are currently set.
pub const fn intersects(&self, other: HeightFieldCellStatus) -> bool
[src]
Returns true
if there are flags common to both self
and other
.
pub const fn contains(&self, other: HeightFieldCellStatus) -> bool
[src]
Returns true
all of the flags in other
are contained within self
.
pub fn insert(&mut self, other: HeightFieldCellStatus)
[src]
Inserts the specified flags in-place.
pub fn remove(&mut self, other: HeightFieldCellStatus)
[src]
Removes the specified flags in-place.
pub fn toggle(&mut self, other: HeightFieldCellStatus)
[src]
Toggles the specified flags in-place.
pub fn set(&mut self, other: HeightFieldCellStatus, value: bool)
[src]
Inserts or removes the specified flags depending on the passed value.
Trait Implementations
impl Binary for HeightFieldCellStatus
[src]
impl BitAnd<HeightFieldCellStatus> for HeightFieldCellStatus
[src]
type Output = HeightFieldCellStatus
The resulting type after applying the &
operator.
pub fn bitand(self, other: HeightFieldCellStatus) -> HeightFieldCellStatus
[src]
Returns the intersection between the two sets of flags.
impl BitAndAssign<HeightFieldCellStatus> for HeightFieldCellStatus
[src]
pub fn bitand_assign(&mut self, other: HeightFieldCellStatus)
[src]
Disables all flags disabled in the set.
impl BitOr<HeightFieldCellStatus> for HeightFieldCellStatus
[src]
type Output = HeightFieldCellStatus
The resulting type after applying the |
operator.
pub fn bitor(self, other: HeightFieldCellStatus) -> HeightFieldCellStatus
[src]
Returns the union of the two sets of flags.
impl BitOrAssign<HeightFieldCellStatus> for HeightFieldCellStatus
[src]
pub fn bitor_assign(&mut self, other: HeightFieldCellStatus)
[src]
Adds the set of flags.
impl BitXor<HeightFieldCellStatus> for HeightFieldCellStatus
[src]
type Output = HeightFieldCellStatus
The resulting type after applying the ^
operator.
pub fn bitxor(self, other: HeightFieldCellStatus) -> HeightFieldCellStatus
[src]
Returns the left flags, but with all the right flags toggled.
impl BitXorAssign<HeightFieldCellStatus> for HeightFieldCellStatus
[src]
pub fn bitxor_assign(&mut self, other: HeightFieldCellStatus)
[src]
Toggles the set of flags.
impl Clone for HeightFieldCellStatus
[src]
pub fn clone(&self) -> HeightFieldCellStatus
[src]
pub fn clone_from(&mut self, source: &Self)
1.0.0[src]
impl Copy for HeightFieldCellStatus
[src]
impl Debug for HeightFieldCellStatus
[src]
impl Default for HeightFieldCellStatus
[src]
pub fn default() -> HeightFieldCellStatus
[src]
impl Eq for HeightFieldCellStatus
[src]
impl Extend<HeightFieldCellStatus> for HeightFieldCellStatus
[src]
pub fn extend<T>(&mut self, iterator: T) where
T: IntoIterator<Item = HeightFieldCellStatus>,
[src]
T: IntoIterator<Item = HeightFieldCellStatus>,
pub fn extend_one(&mut self, item: A)
[src]
pub fn extend_reserve(&mut self, additional: usize)
[src]
impl FromIterator<HeightFieldCellStatus> for HeightFieldCellStatus
[src]
pub fn from_iter<T>(iterator: T) -> HeightFieldCellStatus where
T: IntoIterator<Item = HeightFieldCellStatus>,
[src]
T: IntoIterator<Item = HeightFieldCellStatus>,
impl Hash for HeightFieldCellStatus
[src]
pub fn hash<__H>(&self, state: &mut __H) where
__H: Hasher,
[src]
__H: Hasher,
pub fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher,
1.3.0[src]
H: Hasher,
impl LowerHex for HeightFieldCellStatus
[src]
impl Not for HeightFieldCellStatus
[src]
type Output = HeightFieldCellStatus
The resulting type after applying the !
operator.
pub fn not(self) -> HeightFieldCellStatus
[src]
Returns the complement of this set of flags.
impl Octal for HeightFieldCellStatus
[src]
impl Ord for HeightFieldCellStatus
[src]
pub fn cmp(&self, other: &HeightFieldCellStatus) -> Ordering
[src]
#[must_use]pub fn max(self, other: Self) -> Self
1.21.0[src]
#[must_use]pub fn min(self, other: Self) -> Self
1.21.0[src]
#[must_use]pub fn clamp(self, min: Self, max: Self) -> Self
1.50.0[src]
impl PartialEq<HeightFieldCellStatus> for HeightFieldCellStatus
[src]
pub fn eq(&self, other: &HeightFieldCellStatus) -> bool
[src]
pub fn ne(&self, other: &HeightFieldCellStatus) -> bool
[src]
impl PartialOrd<HeightFieldCellStatus> for HeightFieldCellStatus
[src]
pub fn partial_cmp(&self, other: &HeightFieldCellStatus) -> Option<Ordering>
[src]
pub fn lt(&self, other: &HeightFieldCellStatus) -> bool
[src]
pub fn le(&self, other: &HeightFieldCellStatus) -> bool
[src]
pub fn gt(&self, other: &HeightFieldCellStatus) -> bool
[src]
pub fn ge(&self, other: &HeightFieldCellStatus) -> bool
[src]
impl StructuralEq for HeightFieldCellStatus
[src]
impl StructuralPartialEq for HeightFieldCellStatus
[src]
impl Sub<HeightFieldCellStatus> for HeightFieldCellStatus
[src]
type Output = HeightFieldCellStatus
The resulting type after applying the -
operator.
pub fn sub(self, other: HeightFieldCellStatus) -> HeightFieldCellStatus
[src]
Returns the set difference of the two sets of flags.
impl SubAssign<HeightFieldCellStatus> for HeightFieldCellStatus
[src]
pub fn sub_assign(&mut self, other: HeightFieldCellStatus)
[src]
Disables all flags enabled in the set.
impl UpperHex for HeightFieldCellStatus
[src]
Auto Trait Implementations
impl RefUnwindSafe for HeightFieldCellStatus
[src]
impl Send for HeightFieldCellStatus
[src]
impl Sync for HeightFieldCellStatus
[src]
impl Unpin for HeightFieldCellStatus
[src]
impl UnwindSafe for HeightFieldCellStatus
[src]
Blanket Implementations
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
pub fn borrow_mut(&mut self) -> &mut T
[src]
impl<T, Right> ClosedSub<Right> for T where
T: Sub<Right, Output = T> + SubAssign<Right>,
[src]
T: Sub<Right, Output = T> + SubAssign<Right>,
impl<T> Downcast for T where
T: Any,
[src]
T: Any,
pub fn into_any(self: Box<T, Global>) -> Box<dyn Any + 'static, Global>
[src]
pub fn into_any_rc(self: Rc<T>) -> Rc<dyn Any + 'static>
[src]
pub fn as_any(&self) -> &(dyn Any + 'static)
[src]
pub fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
[src]
impl<T> DowncastSync for T where
T: Send + Sync + Any,
[src]
T: Send + Sync + Any,
impl<T> From<T> for T
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> Pointable for T
pub const ALIGN: usize
type Init = T
The type for initializers.
pub unsafe fn init(init: <T as Pointable>::Init) -> usize
pub unsafe fn deref<'a>(ptr: usize) -> &'a T
pub unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T
pub unsafe fn drop(ptr: usize)
impl<T> Same<T> for T
type Output = T
Should always be Self
impl<T> Scalar for T where
T: PartialEq<T> + Copy + Any + Debug,
[src]
T: PartialEq<T> + Copy + Any + Debug,
impl<SS, SP> SupersetOf<SS> for SP where
SS: SubsetOf<SP>,
[src]
SS: SubsetOf<SP>,
pub fn to_subset(&self) -> Option<SS>
[src]
pub fn is_in_subset(&self) -> bool
[src]
pub fn to_subset_unchecked(&self) -> SS
[src]
pub fn from_subset(element: &SS) -> SP
[src]
impl<T> ToOwned for T where
T: Clone,
[src]
T: Clone,
type Owned = T
The resulting type after obtaining ownership.
pub fn to_owned(&self) -> T
[src]
pub fn clone_into(&self, target: &mut T)
[src]
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
pub fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
pub fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<V, T> VZip<V> for T where
V: MultiLane<T>,
V: MultiLane<T>,