ra8e1-pac 0.3.0

/*
DISCLAIMER
This software is supplied by Renesas Electronics Corporation and is only intended for use with Renesas products.
No other uses are authorized. This software is owned by Renesas Electronics Corporation and is protected under all
applicable laws, including copyright laws.
THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING THIS SOFTWARE, WHETHER EXPRESS, IMPLIED
OR STATUTORY, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NON-INFRINGEMENT.  ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY
LAW, NEITHER RENESAS ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE FOR ANY DIRECT,
INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR
ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Renesas reserves the right, without notice, to make changes to this software and to discontinue the availability
of this software. By using this software, you agree to the additional terms and conditions found by accessing the
following link:
http://www.renesas.com/disclaimer

*/
// Generated from SVD 1.00.01, with svd2pac 0.6.1 on Sun, 15 Mar 2026 06:39:07 +0000

#![allow(clippy::identity_op)]
#![allow(clippy::module_inception)]
#![allow(clippy::derivable_impls)]
#[allow(unused_imports)]
use crate::common::sealed;
#[allow(unused_imports)]
use crate::common::*;
#[doc = r"SRAM Control"]
unsafe impl ::core::marker::Send for super::Sram {}
unsafe impl ::core::marker::Sync for super::Sram {}
impl super::Sram {
    #[allow(unused)]
    #[inline(always)]
    pub(crate) const fn _svd2pac_as_ptr(&self) -> *mut u8 {
        self.ptr
    }

    #[doc = "SRAM Protection Control Register for Secure"]
    #[inline(always)]
    pub const fn sramprcr_s(
        &self,
    ) -> &'static crate::common::Reg<self::SramprcrS_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::SramprcrS_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(0usize),
            )
        }
    }

    #[doc = "SRAM Wait State Control Register"]
    #[inline(always)]
    pub const fn sramwtsc(
        &self,
    ) -> &'static crate::common::Reg<self::Sramwtsc_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::Sramwtsc_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(8usize),
            )
        }
    }

    #[doc = "SRAM Control Register 1"]
    #[inline(always)]
    pub const fn sramcr1(
        &self,
    ) -> &'static crate::common::Reg<self::Sramcr1_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::Sramcr1_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(20usize),
            )
        }
    }

    #[doc = "SRAM Error Status Register"]
    #[inline(always)]
    pub const fn sramesr(
        &self,
    ) -> &'static crate::common::Reg<self::Sramesr_SPEC, crate::common::R> {
        unsafe {
            crate::common::Reg::<self::Sramesr_SPEC, crate::common::R>::from_ptr(
                self._svd2pac_as_ptr().add(64usize),
            )
        }
    }

    #[doc = "SRAM Error Status Clear Register"]
    #[inline(always)]
    pub const fn sramesclr(
        &self,
    ) -> &'static crate::common::Reg<self::Sramesclr_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::Sramesclr_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(72usize),
            )
        }
    }

    #[doc = "SRAM Error Address Register"]
    #[inline(always)]
    pub const fn sramear2(
        &self,
    ) -> &'static crate::common::Reg<self::Sramear2_SPEC, crate::common::R> {
        unsafe {
            crate::common::Reg::<self::Sramear2_SPEC, crate::common::R>::from_ptr(
                self._svd2pac_as_ptr().add(88usize),
            )
        }
    }

    #[doc = "Standby SRAM Control Register"]
    #[inline(always)]
    pub const fn stbramcr(
        &self,
    ) -> &'static crate::common::Reg<self::Stbramcr_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::Stbramcr_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(272usize),
            )
        }
    }

    #[doc = "Standby SRAM Error Address Register"]
    #[inline(always)]
    pub const fn stbramear(
        &self,
    ) -> &'static crate::common::Reg<self::Stbramear_SPEC, crate::common::R> {
        unsafe {
            crate::common::Reg::<self::Stbramear_SPEC, crate::common::R>::from_ptr(
                self._svd2pac_as_ptr().add(336usize),
            )
        }
    }
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct SramprcrS_SPEC;
impl crate::sealed::RegSpec for SramprcrS_SPEC {
    type DataType = u16;
}

#[doc = "SRAM Protection Control Register for Secure"]
pub type SramprcrS = crate::RegValueT<SramprcrS_SPEC>;

impl SramprcrS {
    #[doc = "Register Write Control"]
    #[inline(always)]
    pub fn pr(
        self,
    ) -> crate::common::RegisterField<
        0,
        0x1,
        1,
        0,
        sramprcr_s::Pr,
        sramprcr_s::Pr,
        SramprcrS_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            0,
            0x1,
            1,
            0,
            sramprcr_s::Pr,
            sramprcr_s::Pr,
            SramprcrS_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }

    #[doc = "Write Key Code"]
    #[inline(always)]
    pub fn kw(
        self,
    ) -> crate::common::RegisterField<8, 0xff, 1, 0, u8, u8, SramprcrS_SPEC, crate::common::RW>
    {
        crate::common::RegisterField::<8,0xff,1,0,u8,u8,SramprcrS_SPEC,crate::common::RW>::from_register(self,0)
    }
}
impl ::core::default::Default for SramprcrS {
    #[inline(always)]
    fn default() -> SramprcrS {
        <crate::RegValueT<SramprcrS_SPEC> as RegisterValue<_>>::new(0)
    }
}
pub mod sramprcr_s {

    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct Pr_SPEC;
    pub type Pr = crate::EnumBitfieldStruct<u8, Pr_SPEC>;
    impl Pr {
        #[doc = "Writing to registers are disabled"]
        pub const _0: Self = Self::new(0);

        #[doc = "Writing to registers are enabled"]
        pub const _1: Self = Self::new(1);
    }
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Sramwtsc_SPEC;
impl crate::sealed::RegSpec for Sramwtsc_SPEC {
    type DataType = u8;
}

#[doc = "SRAM Wait State Control Register"]
pub type Sramwtsc = crate::RegValueT<Sramwtsc_SPEC>;

impl Sramwtsc {
    #[doc = "SRAM Wait Enable"]
    #[inline(always)]
    pub fn wten(
        self,
    ) -> crate::common::RegisterField<
        0,
        0x1,
        1,
        0,
        sramwtsc::Wten,
        sramwtsc::Wten,
        Sramwtsc_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            0,
            0x1,
            1,
            0,
            sramwtsc::Wten,
            sramwtsc::Wten,
            Sramwtsc_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }
}
impl ::core::default::Default for Sramwtsc {
    #[inline(always)]
    fn default() -> Sramwtsc {
        <crate::RegValueT<Sramwtsc_SPEC> as RegisterValue<_>>::new(1)
    }
}
pub mod sramwtsc {

    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct Wten_SPEC;
    pub type Wten = crate::EnumBitfieldStruct<u8, Wten_SPEC>;
    impl Wten {
        #[doc = "No wait"]
        pub const _0: Self = Self::new(0);

        #[doc = "Add wait state in read access cycle to SRAMs"]
        pub const _1: Self = Self::new(1);
    }
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Sramcr1_SPEC;
impl crate::sealed::RegSpec for Sramcr1_SPEC {
    type DataType = u8;
}

#[doc = "SRAM Control Register 1"]
pub type Sramcr1 = crate::RegValueT<Sramcr1_SPEC>;

impl Sramcr1 {
    #[doc = "Operation after Detection for Parity Error Detection"]
    #[inline(always)]
    pub fn oad(
        self,
    ) -> crate::common::RegisterField<
        0,
        0x1,
        1,
        0,
        sramcr1::Oad,
        sramcr1::Oad,
        Sramcr1_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            0,
            0x1,
            1,
            0,
            sramcr1::Oad,
            sramcr1::Oad,
            Sramcr1_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }
}
impl ::core::default::Default for Sramcr1 {
    #[inline(always)]
    fn default() -> Sramcr1 {
        <crate::RegValueT<Sramcr1_SPEC> as RegisterValue<_>>::new(0)
    }
}
pub mod sramcr1 {

    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct Oad_SPEC;
    pub type Oad = crate::EnumBitfieldStruct<u8, Oad_SPEC>;
    impl Oad {
        #[doc = "Non-maskable interrupt"]
        pub const _0: Self = Self::new(0);

        #[doc = "Reset."]
        pub const _1: Self = Self::new(1);
    }
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Sramesr_SPEC;
impl crate::sealed::RegSpec for Sramesr_SPEC {
    type DataType = u16;
}

#[doc = "SRAM Error Status Register"]
pub type Sramesr = crate::RegValueT<Sramesr_SPEC>;

impl Sramesr {
    #[doc = "SRAM1 Parity Error Status"]
    #[inline(always)]
    pub fn err1(
        self,
    ) -> crate::common::RegisterField<
        2,
        0x1,
        1,
        0,
        sramesr::Err1,
        sramesr::Err1,
        Sramesr_SPEC,
        crate::common::R,
    > {
        crate::common::RegisterField::<
            2,
            0x1,
            1,
            0,
            sramesr::Err1,
            sramesr::Err1,
            Sramesr_SPEC,
            crate::common::R,
        >::from_register(self, 0)
    }

    #[doc = "Standby SRAM Parity Error status"]
    #[inline(always)]
    pub fn errs(
        self,
    ) -> crate::common::RegisterField<
        14,
        0x1,
        1,
        0,
        sramesr::Errs,
        sramesr::Errs,
        Sramesr_SPEC,
        crate::common::R,
    > {
        crate::common::RegisterField::<
            14,
            0x1,
            1,
            0,
            sramesr::Errs,
            sramesr::Errs,
            Sramesr_SPEC,
            crate::common::R,
        >::from_register(self, 0)
    }
}
impl ::core::default::Default for Sramesr {
    #[inline(always)]
    fn default() -> Sramesr {
        <crate::RegValueT<Sramesr_SPEC> as RegisterValue<_>>::new(0)
    }
}
pub mod sramesr {

    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct Err1_SPEC;
    pub type Err1 = crate::EnumBitfieldStruct<u8, Err1_SPEC>;
    impl Err1 {
        #[doc = "Parity error has not occurred."]
        pub const _0: Self = Self::new(0);

        #[doc = "Parity error has occurred."]
        pub const _1: Self = Self::new(1);
    }
    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct Errs_SPEC;
    pub type Errs = crate::EnumBitfieldStruct<u8, Errs_SPEC>;
    impl Errs {
        #[doc = "Parity error has not occurred."]
        pub const _0: Self = Self::new(0);

        #[doc = "Parity error has occurred."]
        pub const _1: Self = Self::new(1);
    }
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Sramesclr_SPEC;
impl crate::sealed::RegSpec for Sramesclr_SPEC {
    type DataType = u16;
}

#[doc = "SRAM Error Status Clear Register"]
pub type Sramesclr = crate::RegValueT<Sramesclr_SPEC>;

impl Sramesclr {
    #[doc = "SRAM1 Parity Error Status Clear"]
    #[inline(always)]
    pub fn clr1(
        self,
    ) -> crate::common::RegisterField<
        2,
        0x1,
        1,
        0,
        sramesclr::Clr1,
        sramesclr::Clr1,
        Sramesclr_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            2,
            0x1,
            1,
            0,
            sramesclr::Clr1,
            sramesclr::Clr1,
            Sramesclr_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }

    #[doc = "Standby SRAM Parity Error Status Clear"]
    #[inline(always)]
    pub fn clrs(
        self,
    ) -> crate::common::RegisterField<
        14,
        0x1,
        1,
        0,
        sramesclr::Clrs,
        sramesclr::Clrs,
        Sramesclr_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            14,
            0x1,
            1,
            0,
            sramesclr::Clrs,
            sramesclr::Clrs,
            Sramesclr_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }
}
impl ::core::default::Default for Sramesclr {
    #[inline(always)]
    fn default() -> Sramesclr {
        <crate::RegValueT<Sramesclr_SPEC> as RegisterValue<_>>::new(0)
    }
}
pub mod sramesclr {

    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct Clr1_SPEC;
    pub type Clr1 = crate::EnumBitfieldStruct<u8, Clr1_SPEC>;
    impl Clr1 {
        #[doc = "Clear Parity error."]
        pub const _1: Self = Self::new(1);
    }
    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct Clrs_SPEC;
    pub type Clrs = crate::EnumBitfieldStruct<u8, Clrs_SPEC>;
    impl Clrs {
        #[doc = "Clear Parity error."]
        pub const _1: Self = Self::new(1);
    }
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Sramear2_SPEC;
impl crate::sealed::RegSpec for Sramear2_SPEC {
    type DataType = u32;
}

#[doc = "SRAM Error Address Register"]
pub type Sramear2 = crate::RegValueT<Sramear2_SPEC>;

impl NoBitfieldReg<Sramear2_SPEC> for Sramear2 {}
impl ::core::default::Default for Sramear2 {
    #[inline(always)]
    fn default() -> Sramear2 {
        <crate::RegValueT<Sramear2_SPEC> as RegisterValue<_>>::new(0)
    }
}

#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Stbramcr_SPEC;
impl crate::sealed::RegSpec for Stbramcr_SPEC {
    type DataType = u8;
}

#[doc = "Standby SRAM Control Register"]
pub type Stbramcr = crate::RegValueT<Stbramcr_SPEC>;

impl Stbramcr {
    #[doc = "Operation after detection"]
    #[inline(always)]
    pub fn oad(
        self,
    ) -> crate::common::RegisterField<
        0,
        0x1,
        1,
        0,
        stbramcr::Oad,
        stbramcr::Oad,
        Stbramcr_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            0,
            0x1,
            1,
            0,
            stbramcr::Oad,
            stbramcr::Oad,
            Stbramcr_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }
}
impl ::core::default::Default for Stbramcr {
    #[inline(always)]
    fn default() -> Stbramcr {
        <crate::RegValueT<Stbramcr_SPEC> as RegisterValue<_>>::new(0)
    }
}
pub mod stbramcr {

    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct Oad_SPEC;
    pub type Oad = crate::EnumBitfieldStruct<u8, Oad_SPEC>;
    impl Oad {
        #[doc = "Non-maskable interrupt."]
        pub const _0: Self = Self::new(0);

        #[doc = "Reset."]
        pub const _1: Self = Self::new(1);
    }
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Stbramear_SPEC;
impl crate::sealed::RegSpec for Stbramear_SPEC {
    type DataType = u32;
}

#[doc = "Standby SRAM Error Address Register"]
pub type Stbramear = crate::RegValueT<Stbramear_SPEC>;

impl NoBitfieldReg<Stbramear_SPEC> for Stbramear {}
impl ::core::default::Default for Stbramear {
    #[inline(always)]
    fn default() -> Stbramear {
        <crate::RegValueT<Stbramear_SPEC> as RegisterValue<_>>::new(0)
    }
}