ra2a1-pac 0.3.0

/*
DISCLAIMER
This software is supplied by Renesas Electronics Corporation and is only intended for use with Renesas products.
No other uses are authorized. This software is owned by Renesas Electronics Corporation and is protected under all
applicable laws, including copyright laws.
THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING THIS SOFTWARE, WHETHER EXPRESS, IMPLIED
OR STATUTORY, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NON-INFRINGEMENT.  ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY
LAW, NEITHER RENESAS ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE FOR ANY DIRECT,
INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR
ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Renesas reserves the right, without notice, to make changes to this software and to discontinue the availability
of this software. By using this software, you agree to the additional terms and conditions found by accessing the
following link:
http://www.renesas.com/disclaimer

*/
// Generated from SVD 1.1, with svd2pac 0.6.1 on Sun, 15 Mar 2026 07:00:31 +0000

#![allow(clippy::identity_op)]
#![allow(clippy::module_inception)]
#![allow(clippy::derivable_impls)]
#[allow(unused_imports)]
use crate::common::sealed;
#[allow(unused_imports)]
use crate::common::*;
#[doc = r"Low-Power Analog Comparator"]
unsafe impl ::core::marker::Send for super::Acmplp {}
unsafe impl ::core::marker::Sync for super::Acmplp {}
impl super::Acmplp {
    #[allow(unused)]
    #[inline(always)]
    pub(crate) const fn _svd2pac_as_ptr(&self) -> *mut u8 {
        self.ptr
    }

    #[doc = "ACMPLP Mode Setting Register"]
    #[inline(always)]
    pub const fn compmdr(
        &self,
    ) -> &'static crate::common::Reg<self::Compmdr_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::Compmdr_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(0usize),
            )
        }
    }

    #[doc = "ACMPLP Filter Control Register"]
    #[inline(always)]
    pub const fn compfir(
        &self,
    ) -> &'static crate::common::Reg<self::Compfir_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::Compfir_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(1usize),
            )
        }
    }

    #[doc = "ACMPLP Output Control Register"]
    #[inline(always)]
    pub const fn compocr(
        &self,
    ) -> &'static crate::common::Reg<self::Compocr_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::Compocr_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(2usize),
            )
        }
    }

    #[doc = "Comparator Input Select Register"]
    #[inline(always)]
    pub const fn compsel0(
        &self,
    ) -> &'static crate::common::Reg<self::Compsel0_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::Compsel0_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(4usize),
            )
        }
    }

    #[doc = "Comparator Reference voltage Select Register"]
    #[inline(always)]
    pub const fn compsel1(
        &self,
    ) -> &'static crate::common::Reg<self::Compsel1_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::Compsel1_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(5usize),
            )
        }
    }
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Compmdr_SPEC;
impl crate::sealed::RegSpec for Compmdr_SPEC {
    type DataType = u8;
}

#[doc = "ACMPLP Mode Setting Register"]
pub type Compmdr = crate::RegValueT<Compmdr_SPEC>;

impl Compmdr {
    #[doc = "ACMPLP1 Monitor Flag"]
    #[inline(always)]
    pub fn c1mon(
        self,
    ) -> crate::common::RegisterField<
        7,
        0x1,
        1,
        0,
        compmdr::C1Mon,
        compmdr::C1Mon,
        Compmdr_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            7,
            0x1,
            1,
            0,
            compmdr::C1Mon,
            compmdr::C1Mon,
            Compmdr_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }

    #[doc = "ACMPLP1 Reference Voltage SelectionNote1:  It\'s effective only at the time of standard mode.IVREF0 and IVREF1 are chosen at window mode condition in spite of setting of this bit."]
    #[inline(always)]
    pub fn c1vrf(
        self,
    ) -> crate::common::RegisterField<
        6,
        0x1,
        1,
        0,
        compmdr::C1Vrf,
        compmdr::C1Vrf,
        Compmdr_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            6,
            0x1,
            1,
            0,
            compmdr::C1Vrf,
            compmdr::C1Vrf,
            Compmdr_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }

    #[doc = "ACMPLP1 Window Function Mode Enable"]
    #[inline(always)]
    pub fn c1wde(
        self,
    ) -> crate::common::RegisterField<
        5,
        0x1,
        1,
        0,
        compmdr::C1Wde,
        compmdr::C1Wde,
        Compmdr_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            5,
            0x1,
            1,
            0,
            compmdr::C1Wde,
            compmdr::C1Wde,
            Compmdr_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }

    #[doc = "ACMPLP1 Operation Enable"]
    #[inline(always)]
    pub fn c1enb(
        self,
    ) -> crate::common::RegisterField<
        4,
        0x1,
        1,
        0,
        compmdr::C1Enb,
        compmdr::C1Enb,
        Compmdr_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            4,
            0x1,
            1,
            0,
            compmdr::C1Enb,
            compmdr::C1Enb,
            Compmdr_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }

    #[doc = "ACMPLP0 Monitor Flag"]
    #[inline(always)]
    pub fn c0mon(
        self,
    ) -> crate::common::RegisterField<
        3,
        0x1,
        1,
        0,
        compmdr::C0Mon,
        compmdr::C0Mon,
        Compmdr_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            3,
            0x1,
            1,
            0,
            compmdr::C0Mon,
            compmdr::C0Mon,
            Compmdr_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }

    #[doc = "ACMPLP0 Reference Voltage SelectionNote1:  It\'s effective only at the time of standard mode.IVREF0 and IVREF1 are chosen at window mode condition in spite of setting of this bit."]
    #[inline(always)]
    pub fn c0vrf(
        self,
    ) -> crate::common::RegisterField<
        2,
        0x1,
        1,
        0,
        compmdr::C0Vrf,
        compmdr::C0Vrf,
        Compmdr_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            2,
            0x1,
            1,
            0,
            compmdr::C0Vrf,
            compmdr::C0Vrf,
            Compmdr_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }

    #[doc = "ACMPLP0 Window Function Mode Enable"]
    #[inline(always)]
    pub fn c0wde(
        self,
    ) -> crate::common::RegisterField<
        1,
        0x1,
        1,
        0,
        compmdr::C0Wde,
        compmdr::C0Wde,
        Compmdr_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            1,
            0x1,
            1,
            0,
            compmdr::C0Wde,
            compmdr::C0Wde,
            Compmdr_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }

    #[doc = "ACMPLP0 Operation Enable"]
    #[inline(always)]
    pub fn c0enb(
        self,
    ) -> crate::common::RegisterField<
        0,
        0x1,
        1,
        0,
        compmdr::C0Enb,
        compmdr::C0Enb,
        Compmdr_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            0,
            0x1,
            1,
            0,
            compmdr::C0Enb,
            compmdr::C0Enb,
            Compmdr_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }
}
impl ::core::default::Default for Compmdr {
    #[inline(always)]
    fn default() -> Compmdr {
        <crate::RegValueT<Compmdr_SPEC> as RegisterValue<_>>::new(0)
    }
}
pub mod compmdr {

    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct C1Mon_SPEC;
    pub type C1Mon = crate::EnumBitfieldStruct<u8, C1Mon_SPEC>;
    impl C1Mon {
        #[doc = "IVCMP1 < Comparator1 Reference level(When the window function is disabled)/IVCMP1 &lt; IVREF0 or IVCMP1 &gt; IVREF1(When the window function is enabled)"]
        pub const _0: Self = Self::new(0);

        #[doc = "IVCMP1 > Comparator1 Reference level(When the window function is disabled)/IVREF0 < IVCMP1 < IVREF1(When the window function is enabled)"]
        pub const _1: Self = Self::new(1);
    }
    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct C1Vrf_SPEC;
    pub type C1Vrf = crate::EnumBitfieldStruct<u8, C1Vrf_SPEC>;
    impl C1Vrf {
        #[doc = "CMPREF1 input"]
        pub const _0: Self = Self::new(0);

        #[doc = "internal reference voltage (Vref)"]
        pub const _1: Self = Self::new(1);
    }
    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct C1Wde_SPEC;
    pub type C1Wde = crate::EnumBitfieldStruct<u8, C1Wde_SPEC>;
    impl C1Wde {
        #[doc = "Disabled"]
        pub const _0: Self = Self::new(0);

        #[doc = "Enabled"]
        pub const _1: Self = Self::new(1);
    }
    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct C1Enb_SPEC;
    pub type C1Enb = crate::EnumBitfieldStruct<u8, C1Enb_SPEC>;
    impl C1Enb {
        #[doc = "Disabled"]
        pub const _0: Self = Self::new(0);

        #[doc = "Enabled"]
        pub const _1: Self = Self::new(1);
    }
    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct C0Mon_SPEC;
    pub type C0Mon = crate::EnumBitfieldStruct<u8, C0Mon_SPEC>;
    impl C0Mon {
        #[doc = "IVCMP0 < Comparator0 Reference level(When the window function is disabled)/IVCMP0 &lt; IVREF0 or IVCMP0 &gt; IVREF1(When the window function is enabled)"]
        pub const _0: Self = Self::new(0);

        #[doc = "IVCMP0 > Comparator0 Reference level(When the window function is disabled)/IVREF0 < IVCMP0 < IVREF1(When the window function is enabled)"]
        pub const _1: Self = Self::new(1);
    }
    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct C0Vrf_SPEC;
    pub type C0Vrf = crate::EnumBitfieldStruct<u8, C0Vrf_SPEC>;
    impl C0Vrf {
        #[doc = "CMPREF0 input"]
        pub const _0: Self = Self::new(0);

        #[doc = "internal reference voltage (Vref)"]
        pub const _1: Self = Self::new(1);
    }
    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct C0Wde_SPEC;
    pub type C0Wde = crate::EnumBitfieldStruct<u8, C0Wde_SPEC>;
    impl C0Wde {
        #[doc = "Disabled"]
        pub const _0: Self = Self::new(0);

        #[doc = "Enabled"]
        pub const _1: Self = Self::new(1);
    }
    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct C0Enb_SPEC;
    pub type C0Enb = crate::EnumBitfieldStruct<u8, C0Enb_SPEC>;
    impl C0Enb {
        #[doc = "Disabled"]
        pub const _0: Self = Self::new(0);

        #[doc = "Enabled"]
        pub const _1: Self = Self::new(1);
    }
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Compfir_SPEC;
impl crate::sealed::RegSpec for Compfir_SPEC {
    type DataType = u8;
}

#[doc = "ACMPLP Filter Control Register"]
pub type Compfir = crate::RegValueT<Compfir_SPEC>;

impl Compfir {
    #[doc = "ACMPLP1 Filter Select"]
    #[inline(always)]
    pub fn c1edg(
        self,
    ) -> crate::common::RegisterField<
        7,
        0x1,
        1,
        0,
        compfir::C1Edg,
        compfir::C1Edg,
        Compfir_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            7,
            0x1,
            1,
            0,
            compfir::C1Edg,
            compfir::C1Edg,
            Compfir_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }

    #[doc = "ACMPLP1 Edge Polarity Switching"]
    #[inline(always)]
    pub fn c1epo(
        self,
    ) -> crate::common::RegisterField<
        6,
        0x1,
        1,
        0,
        compfir::C1Epo,
        compfir::C1Epo,
        Compfir_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            6,
            0x1,
            1,
            0,
            compfir::C1Epo,
            compfir::C1Epo,
            Compfir_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }

    #[doc = "ACMPLP1 Edge Detection Selection"]
    #[inline(always)]
    pub fn c1fck(
        self,
    ) -> crate::common::RegisterField<
        4,
        0x3,
        1,
        0,
        compfir::C1Fck,
        compfir::C1Fck,
        Compfir_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            4,
            0x3,
            1,
            0,
            compfir::C1Fck,
            compfir::C1Fck,
            Compfir_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }

    #[doc = "ACMPLP0 Filter Select"]
    #[inline(always)]
    pub fn c0edg(
        self,
    ) -> crate::common::RegisterField<
        3,
        0x1,
        1,
        0,
        compfir::C0Edg,
        compfir::C0Edg,
        Compfir_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            3,
            0x1,
            1,
            0,
            compfir::C0Edg,
            compfir::C0Edg,
            Compfir_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }

    #[doc = "ACMPLP0 Edge Polarity Switching"]
    #[inline(always)]
    pub fn c0epo(
        self,
    ) -> crate::common::RegisterField<
        2,
        0x1,
        1,
        0,
        compfir::C0Epo,
        compfir::C0Epo,
        Compfir_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            2,
            0x1,
            1,
            0,
            compfir::C0Epo,
            compfir::C0Epo,
            Compfir_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }

    #[doc = "ACMPLP0 Edge Detection Selection"]
    #[inline(always)]
    pub fn c0fck(
        self,
    ) -> crate::common::RegisterField<
        0,
        0x3,
        1,
        0,
        compfir::C0Fck,
        compfir::C0Fck,
        Compfir_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            0,
            0x3,
            1,
            0,
            compfir::C0Fck,
            compfir::C0Fck,
            Compfir_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }
}
impl ::core::default::Default for Compfir {
    #[inline(always)]
    fn default() -> Compfir {
        <crate::RegValueT<Compfir_SPEC> as RegisterValue<_>>::new(0)
    }
}
pub mod compfir {

    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct C1Edg_SPEC;
    pub type C1Edg = crate::EnumBitfieldStruct<u8, C1Edg_SPEC>;
    impl C1Edg {
        #[doc = "Interrupt and ELC event request by one-edge detection"]
        pub const _0: Self = Self::new(0);

        #[doc = "Interrupt and ELC event request by both-edge detection"]
        pub const _1: Self = Self::new(1);
    }
    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct C1Epo_SPEC;
    pub type C1Epo = crate::EnumBitfieldStruct<u8, C1Epo_SPEC>;
    impl C1Epo {
        #[doc = "Interrupt and ELC event request at rising edge"]
        pub const _0: Self = Self::new(0);

        #[doc = "Interrupt and ELC event request at falling edge"]
        pub const _1: Self = Self::new(1);
    }
    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct C1Fck_SPEC;
    pub type C1Fck = crate::EnumBitfieldStruct<u8, C1Fck_SPEC>;
    impl C1Fck {
        #[doc = "No Sampling (bypass)"]
        pub const _00: Self = Self::new(0);

        #[doc = "Sampling at PCLK"]
        pub const _01: Self = Self::new(1);

        #[doc = "Sampling at PCLK/8"]
        pub const _10: Self = Self::new(2);

        #[doc = "Sampling at PCLK/32"]
        pub const _11: Self = Self::new(3);
    }
    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct C0Edg_SPEC;
    pub type C0Edg = crate::EnumBitfieldStruct<u8, C0Edg_SPEC>;
    impl C0Edg {
        #[doc = "Interrupt and ELC event request by one-edge detection"]
        pub const _0: Self = Self::new(0);

        #[doc = "Interrupt and ELC event request by both-edge detection"]
        pub const _1: Self = Self::new(1);
    }
    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct C0Epo_SPEC;
    pub type C0Epo = crate::EnumBitfieldStruct<u8, C0Epo_SPEC>;
    impl C0Epo {
        #[doc = "Interrupt and ELC event request at rising edge"]
        pub const _0: Self = Self::new(0);

        #[doc = "Interrupt and ELC event request at falling edge"]
        pub const _1: Self = Self::new(1);
    }
    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct C0Fck_SPEC;
    pub type C0Fck = crate::EnumBitfieldStruct<u8, C0Fck_SPEC>;
    impl C0Fck {
        #[doc = "No Sampling (bypass)"]
        pub const _00: Self = Self::new(0);

        #[doc = "Sampling at PCLK"]
        pub const _01: Self = Self::new(1);

        #[doc = "Sampling at PCLK/8"]
        pub const _10: Self = Self::new(2);

        #[doc = "Sampling at PCLK/32"]
        pub const _11: Self = Self::new(3);
    }
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Compocr_SPEC;
impl crate::sealed::RegSpec for Compocr_SPEC {
    type DataType = u8;
}

#[doc = "ACMPLP Output Control Register"]
pub type Compocr = crate::RegValueT<Compocr_SPEC>;

impl Compocr {
    #[doc = "ACMPLP0/ACMPLP1 Speed Selection"]
    #[inline(always)]
    pub fn spdmd(
        self,
    ) -> crate::common::RegisterField<
        7,
        0x1,
        1,
        0,
        compocr::Spdmd,
        compocr::Spdmd,
        Compocr_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            7,
            0x1,
            1,
            0,
            compocr::Spdmd,
            compocr::Spdmd,
            Compocr_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }

    #[doc = "ACMPLP1 VCOUT Output Polarity Selection"]
    #[inline(always)]
    pub fn c1op(
        self,
    ) -> crate::common::RegisterField<
        6,
        0x1,
        1,
        0,
        compocr::C1Op,
        compocr::C1Op,
        Compocr_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            6,
            0x1,
            1,
            0,
            compocr::C1Op,
            compocr::C1Op,
            Compocr_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }

    #[doc = "ACMPLP1 VCOUT Pin Output Enable"]
    #[inline(always)]
    pub fn c1oe(
        self,
    ) -> crate::common::RegisterField<
        5,
        0x1,
        1,
        0,
        compocr::C1Oe,
        compocr::C1Oe,
        Compocr_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            5,
            0x1,
            1,
            0,
            compocr::C1Oe,
            compocr::C1Oe,
            Compocr_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }

    #[doc = "ACMPLP0 VCOUT Output Polarity Selection"]
    #[inline(always)]
    pub fn c0op(
        self,
    ) -> crate::common::RegisterField<
        2,
        0x1,
        1,
        0,
        compocr::C0Op,
        compocr::C0Op,
        Compocr_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            2,
            0x1,
            1,
            0,
            compocr::C0Op,
            compocr::C0Op,
            Compocr_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }

    #[doc = "ACMPLP0 VCOUT Pin Output Enable"]
    #[inline(always)]
    pub fn c0oe(
        self,
    ) -> crate::common::RegisterField<
        1,
        0x1,
        1,
        0,
        compocr::C0Oe,
        compocr::C0Oe,
        Compocr_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            1,
            0x1,
            1,
            0,
            compocr::C0Oe,
            compocr::C0Oe,
            Compocr_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }

    #[doc = "This bit is read as 0. The write value should be 0."]
    #[inline(always)]
    pub fn reserved(
        self,
    ) -> crate::common::RegisterFieldBool<0, 1, 0, Compocr_SPEC, crate::common::RW> {
        crate::common::RegisterFieldBool::<0, 1, 0, Compocr_SPEC, crate::common::RW>::from_register(
            self, 0,
        )
    }
}
impl ::core::default::Default for Compocr {
    #[inline(always)]
    fn default() -> Compocr {
        <crate::RegValueT<Compocr_SPEC> as RegisterValue<_>>::new(0)
    }
}
pub mod compocr {

    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct Spdmd_SPEC;
    pub type Spdmd = crate::EnumBitfieldStruct<u8, Spdmd_SPEC>;
    impl Spdmd {
        #[doc = "Comparator low-speed mode"]
        pub const _0: Self = Self::new(0);

        #[doc = "Comparator high-speed mode"]
        pub const _1: Self = Self::new(1);
    }
    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct C1Op_SPEC;
    pub type C1Op = crate::EnumBitfieldStruct<u8, C1Op_SPEC>;
    impl C1Op {
        #[doc = "Non inverted"]
        pub const _0: Self = Self::new(0);

        #[doc = "Inverted"]
        pub const _1: Self = Self::new(1);
    }
    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct C1Oe_SPEC;
    pub type C1Oe = crate::EnumBitfieldStruct<u8, C1Oe_SPEC>;
    impl C1Oe {
        #[doc = "Disabled"]
        pub const _0: Self = Self::new(0);

        #[doc = "Enabled"]
        pub const _1: Self = Self::new(1);
    }
    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct C0Op_SPEC;
    pub type C0Op = crate::EnumBitfieldStruct<u8, C0Op_SPEC>;
    impl C0Op {
        #[doc = "Non inverted"]
        pub const _0: Self = Self::new(0);

        #[doc = "Inverted"]
        pub const _1: Self = Self::new(1);
    }
    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct C0Oe_SPEC;
    pub type C0Oe = crate::EnumBitfieldStruct<u8, C0Oe_SPEC>;
    impl C0Oe {
        #[doc = "Disabled"]
        pub const _0: Self = Self::new(0);

        #[doc = "Enabled"]
        pub const _1: Self = Self::new(1);
    }
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Compsel0_SPEC;
impl crate::sealed::RegSpec for Compsel0_SPEC {
    type DataType = u8;
}

#[doc = "Comparator Input Select Register"]
pub type Compsel0 = crate::RegValueT<Compsel0_SPEC>;

impl Compsel0 {
    #[doc = "ACMPLP1 Input (IVCMP1) Selection"]
    #[inline(always)]
    pub fn cmpsel54(
        self,
    ) -> crate::common::RegisterField<
        4,
        0x3,
        1,
        0,
        compsel0::Cmpsel54,
        compsel0::Cmpsel54,
        Compsel0_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            4,
            0x3,
            1,
            0,
            compsel0::Cmpsel54,
            compsel0::Cmpsel54,
            Compsel0_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }

    #[doc = "These bits are read as 00. The write value should be 00."]
    #[inline(always)]
    pub fn reserved(
        self,
    ) -> crate::common::RegisterField<2, 0x3, 1, 0, u8, u8, Compsel0_SPEC, crate::common::RW> {
        crate::common::RegisterField::<2,0x3,1,0,u8,u8,Compsel0_SPEC,crate::common::RW>::from_register(self,0)
    }

    #[doc = "ACMPLP0 Input (IVCMP0) Selection"]
    #[inline(always)]
    pub fn cmpsel10(
        self,
    ) -> crate::common::RegisterField<
        0,
        0x3,
        1,
        0,
        compsel0::Cmpsel10,
        compsel0::Cmpsel10,
        Compsel0_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            0,
            0x3,
            1,
            0,
            compsel0::Cmpsel10,
            compsel0::Cmpsel10,
            Compsel0_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }
}
impl ::core::default::Default for Compsel0 {
    #[inline(always)]
    fn default() -> Compsel0 {
        <crate::RegValueT<Compsel0_SPEC> as RegisterValue<_>>::new(17)
    }
}
pub mod compsel0 {

    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct Cmpsel54_SPEC;
    pub type Cmpsel54 = crate::EnumBitfieldStruct<u8, Cmpsel54_SPEC>;
    impl Cmpsel54 {
        #[doc = "No input"]
        pub const _00: Self = Self::new(0);

        #[doc = "CMPIN1 input selected"]
        pub const _01: Self = Self::new(1);

        #[doc = "AMP1O output selected"]
        pub const _10: Self = Self::new(2);
    }
    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct Cmpsel10_SPEC;
    pub type Cmpsel10 = crate::EnumBitfieldStruct<u8, Cmpsel10_SPEC>;
    impl Cmpsel10 {
        #[doc = "No input"]
        pub const _00: Self = Self::new(0);

        #[doc = "CMPIN0 input selected"]
        pub const _01: Self = Self::new(1);

        #[doc = "AMP0O output selected"]
        pub const _10: Self = Self::new(2);
    }
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Compsel1_SPEC;
impl crate::sealed::RegSpec for Compsel1_SPEC {
    type DataType = u8;
}

#[doc = "Comparator Reference voltage Select Register"]
pub type Compsel1 = crate::RegValueT<Compsel1_SPEC>;

impl Compsel1 {
    #[doc = "ACMPLP1 Reference Voltage Selection"]
    #[inline(always)]
    pub fn c1vrf2(
        self,
    ) -> crate::common::RegisterField<
        7,
        0x1,
        1,
        0,
        compsel1::C1Vrf2,
        compsel1::C1Vrf2,
        Compsel1_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            7,
            0x1,
            1,
            0,
            compsel1::C1Vrf2,
            compsel1::C1Vrf2,
            Compsel1_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }

    #[doc = "ACMPLP1 Reference Voltage(IVREF1) Selection"]
    #[inline(always)]
    pub fn crvs54(
        self,
    ) -> crate::common::RegisterField<
        4,
        0x3,
        1,
        0,
        compsel1::Crvs54,
        compsel1::Crvs54,
        Compsel1_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            4,
            0x3,
            1,
            0,
            compsel1::Crvs54,
            compsel1::Crvs54,
            Compsel1_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }

    #[doc = "These bits are read as 00. The write value should be 00."]
    #[inline(always)]
    pub fn reserved(
        self,
    ) -> crate::common::RegisterField<2, 0x3, 1, 0, u8, u8, Compsel1_SPEC, crate::common::RW> {
        crate::common::RegisterField::<2,0x3,1,0,u8,u8,Compsel1_SPEC,crate::common::RW>::from_register(self,0)
    }

    #[doc = "ACMPLP0 Reference Voltage (IVREF0) Selection"]
    #[inline(always)]
    pub fn crvs10(
        self,
    ) -> crate::common::RegisterField<
        0,
        0x3,
        1,
        0,
        compsel1::Crvs10,
        compsel1::Crvs10,
        Compsel1_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            0,
            0x3,
            1,
            0,
            compsel1::Crvs10,
            compsel1::Crvs10,
            Compsel1_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }
}
impl ::core::default::Default for Compsel1 {
    #[inline(always)]
    fn default() -> Compsel1 {
        <crate::RegValueT<Compsel1_SPEC> as RegisterValue<_>>::new(145)
    }
}
pub mod compsel1 {

    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct C1Vrf2_SPEC;
    pub type C1Vrf2 = crate::EnumBitfieldStruct<u8, C1Vrf2_SPEC>;
    impl C1Vrf2 {
        #[doc = "IVREF0 selected"]
        pub const _0: Self = Self::new(0);

        #[doc = "IVREF1 selected"]
        pub const _1: Self = Self::new(1);
    }
    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct Crvs54_SPEC;
    pub type Crvs54 = crate::EnumBitfieldStruct<u8, Crvs54_SPEC>;
    impl Crvs54 {
        #[doc = "No reference voltage"]
        pub const _00: Self = Self::new(0);

        #[doc = "CMPREF1 selected"]
        pub const _01: Self = Self::new(1);

        #[doc = "DA8_1 output selected"]
        pub const _10: Self = Self::new(2);
    }
    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct Crvs10_SPEC;
    pub type Crvs10 = crate::EnumBitfieldStruct<u8, Crvs10_SPEC>;
    impl Crvs10 {
        #[doc = "No reference voltage"]
        pub const _00: Self = Self::new(0);

        #[doc = "CMPREF0 selected"]
        pub const _01: Self = Self::new(1);

        #[doc = "DA8_0 output selected"]
        pub const _10: Self = Self::new(2);
    }
}