# Changelog
All notable changes to this project are documented in this file.
The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.1.0/),
and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
Add entries to `[Unreleased]` as you work — manual bullets always win over the
git-cliff auto-fill (config: `cliff.toml`). On release, promote `[Unreleased]`
to a dated version section.
## [Unreleased]
### Added
-
### Changed
-
### Fixed
-
## [0.9.2] - 2026-06-11
### Added
- `Error::Stdin { program, source }` — a non-broken-pipe stdin-writer failure surfaced on an
otherwise-successful run (see the Phase H stdin fixes below).
- `StdioMode` enum (`Piped` / `Inherit` / `Null`) + `Command::stdout(mode)` /
`Command::stderr(mode)` builders — control per-stream connection independently.
`Piped` (the default) captures as before; `Inherit` lets the child share the parent's
terminal/log; `Null` suppresses output entirely without tying up a pipe.
- `OutputEvent` enum (`Stdout(String)` / `Stderr(String)`) and `OutputEvents` stream —
merge both stdout and stderr into a single ordered sequence of tagged lines.
`RunningProcess::output_events()` starts both pumps and returns the stream;
`RunningProcess::finish_events()` waits for exit and returns the run's `Outcome`.
Lines interleave in arrival order (best-effort; no kernel timestamp).
- `OverflowMode::Error` variant and `OutputBufferPolicy::fail_loud(n)` builder — a
fail-loud capture ceiling: once `n` lines are buffered, subsequent lines are counted
but not retained, and the consuming verb errors with `Error::OutputTooLarge` after the
run. The pipe is still fully drained so the child never blocks on a full pipe.
Use this when unbounded output is a misbehavior rather than a policy choice.
- `Error::OutputTooLarge { program, limit, total_lines }` — produced by the fail-loud
overflow path when the captured line count exceeds the configured ceiling.
- `Command::stdout_tee<W: Write + Send>(writer)` / `Command::stderr_tee<W>(writer)` —
simultaneously capture *and* write each decoded line to `writer` (a `Vec<u8>`, a
`File`, a locked stdout — any `std::io::Write + Send`). Replaces any previously set
per-stream handler; compose inside `on_stdout_line` when multiple sinks are needed.
- `Error::NotFound { program, searched }` — a bare program name (no path separators)
not found now surfaces a distinct, structured error: `` `git` not found on PATH ``.
Enriched from the OS's opaque not-found error rather than a `PATH` pre-check, so a
program the OS resolves by another route (e.g. the application directory on Windows)
is never falsely reported missing. `Error::is_not_found()` returns `true` for this
variant (as it does for the existing `Error::Spawn(NotFound)` / missing-cwd case).
The `searched` field carries the `PATH` directories for programmatic diagnostics.
- `Command::envs([(key, val), …])` — set multiple environment variables in one call.
Equivalent to chaining `env()` calls; order is preserved and a later entry for the
same key wins.
- `Error::Signalled { program, signal }` — a process terminated by a signal now surfaces
a distinct, structured error (was an opaque `Error::Io`). `signal` is the Unix signal
number when the platform reports it, `None` otherwise (e.g. on Windows). The checking
verbs (`run`, `exit_code`, `probe`, `ensure_success`, `require_code`) raise it.
- `StreamedFinish { outcome, stderr }` — the named return of
`RunningProcess::finish_streamed()` (was a bare `(Option<i32>, String)` tuple).
Derives `Debug`, `Clone`, `PartialEq`, `Eq`.
- `Reply::signalled(Option<i32>)` on the test-double seam — script a signal-killed reply
so a hermetic test can exercise `Outcome::Signalled` / `Error::Signalled` handling
without a real subprocess.
### Changed
- **Breaking:** `Outcome::Signalled` now carries the Unix signal number as
`Signalled(Option<i32>)` (was a unit variant). `Some(n)` is the signal that killed the
process when the platform reports it; `None` when unavailable (e.g. on Windows).
- **Breaking:** `RunningProcess::wait()`, `wait_any()`, and `wait_all()` now return the
run's `Outcome` (`Outcome`, `(usize, Outcome)`, and `Vec<Outcome>` respectively) instead
of the raw `Option<i32>` exit code — distinguishing a clean exit, a signal kill, and a
timeout instead of collapsing the last two to `None`. A cancelled run raises
`Error::Cancelled` on every one of these paths.
- **Breaking:** `RunningProcess::finish_streamed()` returns `StreamedFinish { outcome,
stderr }` instead of `(Option<i32>, String)`; `finish_events()` returns `Outcome`
instead of `Option<i32>`.
- `Command::current_dir` doc now explicitly calls out that a relative-path program
(e.g. `"./tool"`) passed to `Command::new` resolves against the *caller's* cwd, not
the directory set here — use an absolute path for the program when combining
`current_dir` with a relative-path executable.
### Changed (Phase I — design block)
- `ProcessGroup::spawn` now takes its `tokio::process::Command` **by value** (D8) instead of
`&mut`: reusing one command across spawns would stack `pre_exec` hooks / re-set creation
flags, so by-value makes that a compile error rather than a silent footgun. The crate's own
run helpers already rebuild the command per run, so only direct `spawn` callers are affected.
- `Command::to_tokio_command` is now `#[doc(hidden)]` (D8) — it remains public and callable as
a raw-tokio bridge to `ProcessGroup::spawn`, but is no longer advertised as 1.0 surface.
- `Invocation::cwd` is now `Option<PathBuf>` instead of `Option<OsString>` (D9) — a working
directory is a path.
- The bulk capture verbs (`output_string`/`output_bytes`) now **error loudly** when `stdout` was
set to `StdioMode::Inherit`/`Null` (D5) — there is no pipe to read, so returning silently-empty
output was a footgun; the streaming verbs document that the stream is empty instead. The
discard verbs (`wait`/`profile`) are unaffected.
- `OutputBufferPolicy::Error` overflow on an **unbounded** buffer is no longer a silent no-op (D9c):
`unbounded().with_overflow(Error)` is a misconfiguration (a ceiling with no ceiling), so it now
fails loud on any **line-pumped** output (`Error::OutputTooLarge`). (`output_bytes` captures stdout
raw, so its stdout is exempt — only its line-pumped stderr trips the ceiling.) Use `fail_loud(n)`
for a real cap.
- `Supervisor` now defaults to a **bounded-tail** capture per incarnation (D3) instead of the
unbounded one-shot default — a long-lived chatty supervised process no longer accumulates its
entire output in memory. An explicit bounded/`fail_loud` command policy is respected; override
via the new `Supervisor::capture`.
- `OutputEvents` (the merged stdout+stderr stream) now alternates which stream it polls first (D9d),
so a continuously-ready stream can't starve the other.
- `Command::first_line`'s predicate now requires `F: Send` (D6) — it delegates through the new
`ProcessRunnerExt::first_line` seam (see Added).
### Added (Phase I — design block)
- `RunningProcess::kills_tree_on_drop()` (D10) — reports whether dropping the handle tears down
the process tree: `true` for a private-group handle (kill-on-close leak-safety), `false` for a
shared-`ProcessGroup` handle (the group owner tears down). Lets a receiving function reason
about whether dropping the handle is sufficient cleanup.
- `ProcessRunnerExt::first_line` (D6) — the streaming first-matching-line search, routed through
the `start` seam so it is exercisable with any runner (a `ScriptedRunner` in tests), not just the
real `JobRunner`. `Command::first_line` now delegates to it.
- `Supervisor::capture(policy)` (D3) — override the per-incarnation output-capture policy (the
default is a bounded tail; see Changed).
- Documented the deliberate design choices the block confirmed: `ProcessRunner::start` stays a
defaulted runtime capability (`Error::Unsupported`) rather than a compile-time `ProcessStarter`
split (D4); the `cli_client!` macro is kept and documented as committed public API (D7); and
`Command::timeout_signal` stays behind `process-control` because the `Signal` type does — the
divergence is accepted rather than enlarging the always-on surface (D9b).
### Fixed (Phase H — stdin)
- A stdin-writer failure is no longer silently swallowed: a non-broken-pipe error feeding the
child's standard input now surfaces as the new `Error::Stdin { program, source }` — **but
only when the run otherwise succeeded** (a non-zero exit, signal, or timeout is the "realer"
failure and wins; a broken pipe, the child closing stdin early, never surfaces). Diagnoses a
silently-truncated input the otherwise-successful child may have acted on.
- `Stdin::write_to` now releases the one-shot source mutex *before* the copy/stream (B17), so a
concurrent second run on a cloned `Stdin` sees the consumed source and gets prompt EOF instead
of blocking on the lock for the whole copy.
- `wait_any` / `wait_all` now close an untaken `keep_stdin_open` pipe (L5), matching the bulk
verbs — a stdin-reading child joined via the race path sees EOF instead of blocking forever
(the race path applies no timeout).
- Doc fixes (L12): `run` / `run_unit` document that `ok_codes` widens the accepted exit set;
`Command::env`'s doc no longer falsely claims a `None` value removes a variable (use
`env_remove`).
### Security (Phase G — security / hygiene)
- `Command`, `CliClient`, and `Invocation` now have a redacted `Debug`: it surfaces the
argument *count* and the env variable *names* (sorted), never argv or env *values* — so a
`{cmd:?}` log line or an `assert_eq!` failure can't leak a secret. `command_line()` stays
the documented, explicitly-secret-bearing escape hatch for the real argv.
- `Error` now has a manual `Debug` (was derived): the `Exit` variant's captured streams are
bounded to a 200-byte preview (mirroring the `Display` tail cap) so `{e:?}` / `.unwrap()`
can't dump a multi-MiB stream, and `NotFound`'s `searched` (the `PATH` env value) is
redacted to a directory count rather than logged. The size-bound is deliberately
`Error`-only — the reflexive `{e:?}` / `.unwrap()` logging vector; `ProcessResult` keeps
full streams in its `Debug` for test inspection (and its stdout/stderr are policy-verbatim
regardless).
- Cassette (`RecordReplayRunner`) hardening: the file is written owner-only (`0600`) on Unix;
the best-effort drop-flush is skipped while unwinding, so a panic mid-recording no longer
persists a surprise cassette; and the docs now scope the "no secrets" guarantee to env
*values* only — argv, cwd, stdout, and stderr are stored verbatim and may carry secrets.
- Documented the cassette's lossy-key limitation: two distinct non-UTF-8 invocations that
differ only in their invalid bytes decode to the same match key and collide on replay
(valid-UTF-8 invocations never collide).
### Fixed (Phase F — group / limits / sys layer)
- Linux cgroup resource limits (B13): made the `cgroup.subtree_control` controller-enable
conditional (it now writes only the controllers not *already* enabled, skipping a redundant
write) and corrected the previously **misleading** error/docs. The honest story: the crate
creates the limit cgroup as a child of this process's own cgroup and enables the controllers
there, which cgroup v2's "no internal processes" rule permits only at the **real cgroup-v2
hierarchy root** (the one exempt cgroup) — so limits apply only when this process is a direct
member of that real root, and fail fast (`Error::ResourceLimit`) under a systemd
session/scope/service or an ordinary (private-cgroupns) container, both of which place it in a
non-root cgroup. A cgroup *namespace* root does **not** count. The crate deliberately does not
migrate your process into a sub-cgroup to work around the rule. (The previous error/docs
recommended `Delegate=yes` / `systemd-run --scope` and a "delegated leaf", which all still
`EBUSY` — that advice is removed.) Docs (`ResourceLimits`, README, platform-support,
process-groups) corrected to match.
- Documented the Linux `max_processes` cross-platform divergence (B14): the kernel checks
`pids.max` only for forks *inside* the cgroup, so on Linux the cap bounds a contained tree's own
forks but does not reject additional `ProcessGroup::start` calls that each add a top-level child
(Windows' `ActiveProcessLimit` does). `ResourceLimits::max_processes` now spells this out.
- Documented the POSIX process-group graceful-shutdown zombie caveat (B16): on the
`ProcessGroup` mechanism (macOS/BSD, Linux fallback) an unreaped zombie still answers the
liveness probe, so `ProcessGroup::shutdown` burns the full `shutdown_timeout` on a child that
exited on `SIGTERM` but whose handle was never awaited — await each child you start into the
group. The Job Object / cgroup mechanisms are immune.
- `ProcessGroup::shutdown` with `escalate_to_kill(false)` now actually preserves survivors:
the `Drop` impls for all three backends (Linux cgroup, POSIX process-group, Windows Job
Object) no longer hard-kill the tree when `graceful_shutdown` was invoked with
`escalate=false`. Previously, the per-platform `Drop` backstop unconditionally killed
regardless of the escalation setting. (The run-level `timeout_grace` path always escalates,
so it is unaffected.)
- Fixed a provenance UB in the Windows `job_member_pids` helper: the flexible-array
`ProcessIdList` field in `JOBOBJECT_BASIC_PROCESS_ID_LIST` is now addressed via
`std::ptr::addr_of!((*list).ProcessIdList[0])` instead of `.as_ptr()` on the `[ULONG_PTR;1]`
field, which previously created a reference with incorrect provenance over the out-of-bounds
elements.
- `ProcessGroupStats::total_cpu_time` doc now explains the semantic divergence: the Windows
Job Object accumulates CPU time historically (including terminated processes), while the
Linux cgroup path sums only currently-live processes' `/proc` counters.
- POSIX process-group `exists()` probe no longer permanently prunes a just-spawned pid
whose process group does not yet exist: `ESRCH` on the negative group-id probe now falls
back to a direct pid probe, so a child between fork and its `setpgid(0,0)` call is not
incorrectly evicted from the tracking set. The teardown sweep mirrors this — when
`killpg` finds no group it falls back to a direct pid signal, so such an entry is actually
delivered to and drains instead of being retained-but-never-signalled (which would have
stalled `shutdown` to its full timeout).
### Fixed
- `ProcessResult::combined()` now inserts a `\n` separator between stdout and stderr when
stdout is non-empty and does not already end with a newline, preventing the last stdout
line from being glued to the first stderr line.
- Pipeline `pipefail` attribution now honors per-stage `ok_codes`: an inner stage that
exits with a code in its `ok_codes` set is considered clean and does not trigger
attribution, instead of checking only for `Exited(0)`.
- Pipeline `pipefail` now attributes to the first **non-SIGPIPE** checked failure rather
than the first checked failure of any kind. A SIGPIPE-killed upstream stage is typically
a victim of a downstream failure; the downstream culprit is now correctly attributed.
When all failures are SIGPIPE, the leftmost is still attributed as before.
- Pipeline `pipefail` now preserves the real exit code of an `unchecked()` last stage
instead of fabricating `Exited(0)`. `is_success()` remains `true` and `ensure_success()`
still passes; `code()` now returns the actual exit code for callers that inspect it.
- `Error::NotFound` `Display` no longer includes the raw `PATH` environment value
(e.g. `searched: /usr/bin:/usr/local/bin`). The `searched` field remains accessible for
programmatic use. `PATH` is an environment value and must not appear in logs.
- When a bare program name is on `PATH` but the OS cannot execute it directly (e.g. a
`.cmd`/`.bat` script on Windows that requires `cmd.exe`), the error is now the raw
`Error::Spawn` rather than the misleading `Error::NotFound` — the program was found.
- `is_bare_name("git/")` now correctly returns `false`; a trailing path separator makes
a name path-ish and it should not be looked up on `PATH` as a bare name.
- Windows `command_line()` display: a path argument ending with a backslash (e.g.
`C:\my tools\`) now doubles the trailing backslash before the closing `"` so it does
not escape the closing quote (was: `"C:\my tools\"`, now: `"C:\my tools\\"`).
- A signal-killed process is no longer reported as a generic `Error::Io("terminated by
signal")`; the checking verbs now raise the structured `Error::Signalled` (carrying the
signal number on Unix), and `Outcome::Signalled` preserves it for inspection.
- `finish_streamed` and `finish_events` previously drained an untaken stdout pipe into an
unbounded `Vec`, bypassing any configured `OutputBufferPolicy`. They now route the pipe
through the normal pumping path, respecting the buffer policy (including `fail_loud`).
- `wait` and `profile` previously accumulated all output in the user-configured buffer even
though output is discarded on those paths, causing O(total-lines) peak heap use. Both now
use a retain-nothing sink that keeps the pipe drained without buffering any lines.
**Behavior note:** `OverflowMode::Error` (via `fail_loud`) no longer fires during `wait`
or `profile` — it fires only on the capturing verbs (`output_string`, `output_bytes`,
`finish_streamed`, `finish_events`). If you need the DoS guard on a run you don't capture,
use a capturing verb.
- `output_string` / `output_bytes` called after `stdout_lines` previously returned empty
output because they created fresh empty sinks and ignored the running streaming pump.
They now reuse the existing pump's sink and join its handle, capturing all buffered and
in-flight output correctly.
- Calling `stdout_lines` or `output_events` a second time on the same `RunningProcess` now
returns an empty stream instead of silently replacing the first call's sink reference,
which previously caused the overflow flag to be lost.
- A second `output_events` call no longer shares the same stderr `SharedLines` as the first;
it receives a fresh already-closed sink, preventing a `notify_one` race that could leave
the first consumer's internal task permanently parked.
- Pump task handles previously held in a frame-local `Vec` were leaked (left as detached
tasks) if an early `?` exit occurred between the pump spawns and the explicit join. Handles
are now stored on `RunningProcess` fields and aborted by `Drop`, bounding the leak to
the process handle's lifetime.
## [0.9.1] - 2026-06-09
### Added
- `Command::ok_codes([..])` — treat the given exit codes (not just `0`) as success for
the checking verbs (`run`/`run_unit` and `ProcessResult::is_success`/`ensure_success`),
for tools whose non-zero exit is a normal result — `grep` (1 = no match), `diff`
(1 = differs), rsync's code families. `exit_code` (raw code) and `probe` (0/1
convention) are unchanged; an empty set is ignored.
- `ProcessResult::duration()` — the run's wall-clock time (spawn → exit/kill), carried
on the result instead of making callers wrap each run in their own `Instant::now()`.
`Duration::ZERO` for synthetic results (scripted/replayed bulk `output`).
- `ProcessResult::truncated()` — whether a bounded `OutputBufferPolicy` dropped captured
output lines, so a caller that bounds the buffer can tell when output was lost
(the unbounded default never truncates).
- `Command::command_line()` — render the command as a single shell-quoted line for
logs, error messages, or a dry-run echo (per-platform quoting; **display only** —
the crate never invokes a shell). It includes argv (which may carry secrets), so —
unlike the `tracing` feature, which never logs argv — it is opt-in.
- A `current_dir` that does not exist now fails with a clear *"working directory does
not exist"* error (`Error::is_not_found()` is `true`) instead of the opaque `ENOENT`
that looked like the program itself was missing.
- `Command::timeout_grace(Duration)` + `Command::timeout_signal(Signal)` — a **graceful
run-level timeout**: at the deadline the tree is signalled (`SIGTERM` by default, or
the chosen signal), given up to the grace window to exit, then `SIGKILL`ed — instead
of the immediate hard kill. Reuses the `ProcessGroup::shutdown` tier and reaps
concurrently, so a signal-handling child ends the grace early. Applies to bulk and
streaming runs, own- and shared-group; `timed_out()` stays `true`. Windows has no
signal tier (atomic kill at the deadline). `timeout_signal` needs `process-control`.
### Changed
- **Breaking:** `RestartPolicy`, `OverflowMode`, `OutputBufferPolicy`, `ResourceLimits`,
and `ProcessGroupOptions` are now `#[non_exhaustive]` — they may gain variants/fields
later without another breaking change. Build the structs via their
constructors/builders (`ProcessGroupOptions::default()`, `OutputBufferPolicy::bounded(..)`,
…) instead of struct literals.
- `ProcessGroupOptions::shutdown_timeout(Duration)` / `escalate_to_kill(bool)` builders —
the grace-window fields now have builders, matching the `limits` knobs.
### Fixed
- `Error::Exit` now carries the **full** captured `stdout`/`stderr` instead of truncating
each to 4 KiB. Truncation happened before the caller could classify on the streams
(grep for a marker, parse a sub-code), silently destroying the data they needed. The
one-line `Display` message is still bounded, so logs stay tidy — only the fields grew.
## [0.9.0] - 2026-06-08
### Added
- `Error::is_not_found()` / `is_permission_denied()` / `is_transient()` — io-level
classifiers over the `Spawn`/`Io` error: distinguish a missing binary (`ENOENT`),
a permission denial (`EACCES`/`EPERM`), and a transient condition a bare retry can
clear (`EINTR`/`EAGAIN`/busy, `ETXTBSY`, Windows sharing/lock violation) without
matching raw `io::ErrorKind`. Pairs with `Command::retry(.., |e| e.is_transient())`.
Scope is io/spawn-level only — exit-code retryability stays the caller's domain,
and `Error::Timeout` is excluded (compose it explicitly if wanted).
- `Command::groups([gid, ..])` — set the child's supplementary groups (Unix
privilege drop), the missing third leg beside `uid`/`gid`: dropping the uid alone
leaves the child holding the parent's (often root's) supplementary groups. The OS
applies `setgroups → setgid → setuid`. POSIX-only — non-Unix fails with
`Error::Unsupported`, never a silent skip.
### Changed
-
### Fixed
-
## [0.8.2] - 2026-06-08
### Added
- `wait_all(&mut [&mut RunningProcess])` — the join companion to `wait_any`:
drives every handle to exit and returns the exit codes in input order (an
empty slice resolves to an empty `Vec`). Cancel-safe and borrow-only, like
`wait_any`.
- `output_all(commands, concurrency, runner)` — run a batch of commands with a
concurrency cap, collecting every `Result<ProcessResult<String>>` in input
order (collect-all: a non-zero exit is data, never a short-circuit). The
back-pressure the one-shot verbs lack when fanning out many commands. Pass
`&group` to share one kill-on-drop group, or `&JobRunner` for private groups.
Not a pool/scheduler/retrier by design.
### Changed
-
### Fixed
-
## [0.8.1] - 2026-06-08
### Fixed
- fix(readme): use direct raw.githubusercontent URL for cover so crates.io stops generating a CSP-blocked github.com/raw redirect
## [0.8.0] - 2026-06-07
### Added
- `ProcessRunner::start` — the live-handle half of a run joins the seam (with
an `Error::Unsupported` default, so `output`-only runners keep compiling).
`ScriptedRunner::start` returns a **scripted `RunningProcess`** whose canned
output flows through the same pump machinery as a real child: streaming
(`stdout_lines`), readiness probes, and `finish_streamed` are now
hermetically testable. `Reply::lines([...])` scripts the lines;
`Reply::with_line_delay(d)` paces them (paused-clock friendly);
`RecordingRunner` records `start` invocations. Scripted handles have no pid,
don't compose into a real `Pipeline`, and don't model interactive stdin
(documented). Cassette record/replay does not yet cover streaming runs.
- `ScriptedRunner::output` now replays canned stdout/stderr through the
command's `on_stdout_line`/`on_stderr_line` handlers, so progress-reporting
wrappers test hermetically (requested by a downstream wrapper crate's
streaming spec).
- `ProcessRunnerExt::run_unit` — run for the side effect, require a zero
exit, discard the output (the verb `CliClient::run_unit` delegates to).
- More `tracing` events (behind the `tracing` feature, `processkit` target):
child spawn (program/pid/mechanism), timeout and cancellation firing, group
terminate/shutdown, retry attempts, stdin-writer failures, output-pump
panics and teardown overruns, and `adopt`. Still never logs argv or
environment values.
- `ProcessResult::outcome() -> Outcome` — how the run ended as an explicit
`Exited(i32) | Signalled | TimedOut` enum, now the internal representation
behind the `code()`/`timed_out()`/`is_success()` accessors (which are
unchanged, derived, and remain the everyday surface). `Outcome` is
`#[non_exhaustive]`. Cassette wire format is untouched.
- `CliClient::default_cancel_on(token)` (`cancellation` feature) — a
client-level cancellation default, completing the run-control default set
(`default_timeout`/`default_env`): every command the client builds carries
the token, so cancelling it kills all of that client's in-flight runs. A
per-command `cancel_on` *replaces* the default (explicit beats default).
The `cli_client!` macro re-emits the builder on generated wrappers.
Requested by a downstream wrapper crate.
- `Reply::pending()` (`cancellation` feature) — a `ScriptedRunner` reply that
parks the call until the command's cancellation token fires, then resolves
with `Error::Cancelled`, making cancellation *behaviour* (not just its
aftermath) hermetically testable. With no token it parks forever, like a
hung child.
- `Command::kill_on_parent_death()` — opt-in hardening so an abruptly-dying
parent (`SIGKILL`, where `Drop` never runs) still takes its child down:
Linux arms `PR_SET_PDEATHSIG(SIGKILL)` on the direct child (the
parent-died-first race is closed by re-checking `getppid` against the
spawner's pre-fork pid — PID-1-entrypoint-safe); Windows already
guarantees the whole tree via the job handle closing; macOS/BSD have no
equivalent (documented no-op). Idea borrowed from `execa`'s
cleanup-on-exit, mapped to native primitives.
- `Command::unchecked()` — exempt a pipeline stage from pipefail attribution
(design borrowed from `duct`): its unclean exit (non-zero, signal kill
including SIGPIPE, or its per-stage-timeout kill) is skipped when blaming
the chain, fixing the `producer | head -1` false failure. Checked failures
always trump unchecked ones; a chain whose only failures are unchecked
reports success. No-op outside a pipeline; never relaxes a whole-chain
`Pipeline::timeout`.
- `|` operator on `Command`/`Pipeline` — `a | b | c` is sugar for
`a.pipe(b).pipe(c)`: the same shell-free, one-group, pipefail pipeline.
Parenthesize the chain before a terminal verb.
- `Supervisor::storm_pause` / `failure_decay` / `failure_threshold` — an
opt-in failure-storm guard (design borrowed from Go's `suture`): each
failure feeds a score that halves every `failure_decay`
(`score = score × 0.5^(Δt/decay) + 1`); past `failure_threshold` the
supervisor takes one jittered `storm_pause` and resets the score,
distinguishing "fails rarely" from "crash-looping". Off by default;
pauses taken are reported in `SupervisionOutcome::storm_pauses`.
### Changed
- A **panicking line handler no longer poisons the run**: the panic is caught,
the handler is disabled for the rest of the run (surfaced as a `tracing`
warn), and the child keeps being drained — the final result still carries
every line. Previously the pump died with the panic and capture was cut at
that point. The `on_stdout_line`/`on_stderr_line` docs now also state the
ordering guarantees: FIFO within a stream, no cross-stream order, and all
handler calls happen-before the consuming verb resolves (requested by a
downstream wrapper crate's streaming spec).
- **Breaking**: `CliClient`'s run helpers renamed to the crate-wide verb
vocabulary — `text → run`, `capture → output`, `unit → run_unit`,
`code → exit_code` (`probe`/`parse`/`try_parse` unchanged). The same verb
now means the same thing on `Command`, `ProcessRunnerExt`, and `CliClient`;
`ProcessRunnerExt` gained `run_unit` for full symmetry. No deprecated
aliases (pre-1.0). `ProcessResult::code()` — the plain accessor — is
unrelated and unchanged.
- `Error::Exit`'s `Display` now appends a bounded diagnostic excerpt — the
last non-empty line of stderr (or stdout as fallback), capped at 200
bytes: `` `git` exited with code 2: fatal: boom `` (idea borrowed from
`execa`'s error messages). Display text is not part of the semver
contract; the carried `stdout`/`stderr` fields and `diagnostic()` are
unchanged.
- `SupervisionOutcome` is now `#[non_exhaustive]` (it gained the
`storm_pauses` field; like `ProcessGroupStats`/`RunProfile` it is a
read-only report the crate produces, so future telemetry can be added
without another breaking change). **Breaking** for exhaustive
destructuring or struct-literal construction outside the crate.
### Fixed
- `keep_stdin_open` combined with a **bulk** verb (`output_string`/`run`/…)
no longer hangs a stdin-reading child: a consuming verb now closes an
**untaken** interactive stdin pipe (nothing could ever write to it again),
so the child sees EOF instead of blocking to its timeout. A writer taken
via `standard_input()` is unaffected. The `keep_stdin_open` docs previously
claimed bulk helpers "always close stdin" — now they actually do.
## [0.7.1] - 2026-06-06
### Fixed
- fix: repair main after the v0.7.0 release commit was dropped (manifest, changelog, release guard)
### Added
- Add cover art to the project overview
## [0.6.2] - 2026-06-06 [YANKED]
- **Yanked on crates.io — use 0.7.0.** A force-push had dropped the
`Release v0.7.0` commit from `main` before this patch release ran, so the
release workflow computed the next version from the stale `0.6.1` manifest
and published the **entire 0.7.0 content below under a `^0.6`-compatible
patch version** — including the changes that are breaking for
`default-features = false` consumers. The `v0.6.2` tag and GitHub Release
remain for the record; the crates.io version is yanked. (The release
workflow now refuses to run when the manifest is behind the latest release
tag, so this failure mode is caught before publishing.)
## [0.7.0] - 2026-06-06
> **Release note:** this cycle contains a **breaking** change for
> `default-features = false` consumers (resource measurement moved behind the
> now-default `stats` feature — see *Changed*).
### Changed
- The tree-control surface is now behind a **default-on** `process-control`
feature: `Signal` and
`ProcessGroup::{signal, suspend, resume, members, adopt}`. The flag is
additive and gates *visibility only* — the kill-on-drop tree guarantee
(and `terminate_all`/`shutdown`) is unconditional in every configuration.
**Migration note** for `default-features = false` consumers: previously
that disabled only `stats`; now it also hides the surface above —
re-enable it explicitly. (A broader visibility split — gating
pipelines/supervisor/CliClient/test doubles too — was implemented and
deliberately rolled back: those gates removed no dependencies while
costing cfg noise and doc quality; see `ideas/three-layer-resource-split.md`
for the full decision record.)
- `windows-sys` bumped 0.59 → 0.61 to dedup with the copy tokio/mio already
ship — the lockfile now carries a single `windows-sys`.
- Every public type now implements `Debug` (enforced by a crate lint), and
`Command` is `#[must_use]` — building one and dropping it unused now warns.
- Resource measurement (`ProcessGroupStats`, `ProcessGroup::stats`,
`RunningProcess::cpu_time`/`peak_memory_bytes`) now sits behind a default-on
`stats` Cargo feature: `default-features = false` compiles the accounting code
(and its Windows ProcessStatus FFI) out. Consumers on default features see no
change; consumers who already set `default-features = false` must add
`features = ["stats"]` to keep that API.
- `ProcessGroupStats` and `RunProfile` are now `#[non_exhaustive]`: they are
read-only outputs the crate produces, so future metrics can be added without
a breaking change. Reading fields is unaffected; struct-literal construction
and exhaustive destructuring outside the crate no longer compile.
(`ProcessGroupOptions`, `ResourceLimits`, and `Invocation` deliberately stay
exhaustive — constructing them is their intended use.)
### Fixed
- POSIX process-group liveness probes treated `EPERM` as "process gone": a
live tree whose members the caller may no longer signal (e.g. after a
third-party uid change) was silently pruned from tracking — and therefore
never killed on drop. Probes now distinguish `ESRCH` (gone — prune) from
`EPERM` (exists — keep and still attempt the best-effort signal).
- `output_bytes` awaited an **unbounded** raw stdout drain: on a shared-group
handle whose timeout/cancel kills only the direct child, a surviving
descendant holding the pipe could park the call forever. The drain is now
bounded by the same pump-teardown grace as every other consumer, aborting
the straggler and returning the partial bytes read so far.
- The streaming deadline/cancel watchdog tasks are now stopped as soon as the
child's fate is settled (not only on handle drop), closing a narrow window
where a late firing could signal an already-reaped pid.
- POSIX process-group `ProcessGroup::adopt` was a silent no-op for any child
that had already `exec`'d (the normal case): POSIX refuses `setpgid` there
(`EACCES`), and the pid was recorded as a process-*group* id that doesn't
exist, so teardown never reached the child. Such children are now tracked
and signalled individually — the adopted child is contained (killed with the
group), though its future forks are not (unlike Windows/cgroup adoption).
Adopting a child the group already tracks (a self-spawned leader, or a
repeated adopt) is also de-duplicated now, so `members()`/`stats()` no
longer over-report or grow per call.
- The streaming deadline/cancellation kill paths now also kill the **direct
child by pid** after the group teardown — parity with the run-to-completion
path's `start_kill` + `terminate_all` pairing, so a group-kill miss on the
direct child can't leave a bounded stream running. Safe against pid reuse:
the tasks are aborted when the handle drops, so they can only fire while
the child is live or an unreaped zombie (its pid still held). (Note: this
cannot rescue a *grandchild* forked mid-broadcast — the POSIX group
broadcast is documented best-effort against a forking tree, which is what
one macOS CI run actually hit.)
### Added
- `ProcessResult::program()` — the program a result is attributed to (for a
`Pipeline` outcome, the pipefail-attributed stage). Previously the name was
only recoverable by failing the result and matching the error.
- `docs/` guide set — eight cross-linked, per-topic guides (running commands,
process groups, streaming & interactive I/O, pipelines, timeouts/retries/
cancellation, supervision, testing, platform support) with richer examples
and all capability matrices and platform caveats collected in one place;
linked from the README's new Documentation section.
- Record/replay cassettes (`record` feature, off by default, pulls optional
`serde` + `serde_json`): `RecordReplayRunner::record(path, inner)` captures
real `Invocation → ProcessResult` pairs through any inner runner and writes
a human-diffable JSON cassette (`save()`, or best-effort on drop);
`RecordReplayRunner::replay(path)` serves them back hermetically — no
subprocess. Matching is by program + args + cwd + has-stdin; env override
values are never written (sorted names only — a committed fixture can't
leak secrets) and env is not part of the match key. Duplicates of one
invocation replay in capture order, then the last entry repeats. A miss in
replay is a strict `Error::Spawn` (NotFound) — replay never spawns. The
cassette carries a format `version` for forward evolution; non-UTF-8
program/args/cwd are stored lossily (documented).
- Cancellation (`cancellation` feature, off by default, pulls optional
`tokio-util`): `Command::cancel_on(token)` ties a run to a re-exported
`CancellationToken` — cancelling it kills the process tree and every
consuming path (`run`/`output_string`/`output_bytes`/`wait`/`profile`/
`finish_streamed`) reports the new `Error::Cancelled`. Asymmetric with
timeout by design: a timeout is *captured* in the result (`timed_out`), a
cancellation is always an error; when both land, cancellation wins. A token
cancelled before launch short-circuits without spawning. On a shared
`ProcessGroup` handle, cancel kills the child only — siblings are untouched
(same scope as timeout). A `stdout_lines` stream ends on cancel (own-group
runs); the raw `wait_any`/`first_line` primitives don't synthesize the error
for a mid-run cancel. A cancelled run is never re-attempted: `retry` policies
and `Supervisor` restarts both treat it as terminal — no retry into a
still-cancelled token.
- Environment and privilege builders on `Command`: `inherit_env([names])`
(allow-list on a cleared environment, copied from the parent at each spawn;
explicit `env`/`env_remove` still win), `uid(u32)`/`gid(u32)` (Unix privilege
drop; gid applied before uid; on the Linux cgroup mechanism the spawn
currently fails with a permission error — the cgroup join runs after the
drop — while the process-group mechanism composes cleanly), `setsid()`
(Unix new session — containment is
preserved, the group tracks the new session's process group), and
`create_no_window()` (Windows `CREATE_NO_WINDOW`, now OR'd with the group's
`CREATE_SUSPENDED` on the Command-driven launch paths instead of being
clobbered; harmless no-op elsewhere). On non-Unix targets `uid`/`gid`/
`setsid` fail the run with `Error::Unsupported` — a requested privilege drop
is never silently skipped.
- Shell-free pipelines: `Command::pipe(next)` starts a `Pipeline` (extend with
`.pipe(...)`, bound with `.timeout(...)`, drive with `output_string()` /
`run()`). Stages connect stdout→stdin through native pipes — no shell, no
quoting/injection surface — and all run inside one shared kill-on-drop group.
Pipefail outcome: stdout is the last stage's, while code/stderr/program are
attributed to the first stage that didn't exit cleanly; `run()` requires
every stage to succeed.
- Readiness probes on `RunningProcess` — wait until a started child is
actually ready instead of sleeping: `wait_for_line(predicate, within)`
(stream stdout until a line matches, returning it; consumes stdout up to the
match), `wait_for_port(addr, within)` (until a TCP connect is accepted), and
`wait_for(check, within)` (until any async predicate passes; ~50 ms cadence).
All three fail with the new `Error::NotReady` when the deadline elapses — or
immediately once readiness can no longer happen (the child exits; for
`wait_for_line`, its stdout closes) — and never kill the child (a probe
deadline is separate from `Command::timeout`).
- `Supervisor` — keep a child alive: restart per `RestartPolicy`
(`Always`/`OnCrash`/`Never`, where a crash is any run without a clean exit —
non-zero, timeout, signal, or spawn failure), bounded by `max_restarts`, with
exponential backoff (`backoff(base, factor)`, capped by `max_backoff`,
jittered ×[0.5, 1.5) by default — `jitter(false)` for determinism) and a
`stop_when` predicate that ends supervision regardless of policy. `run()`
reports a `SupervisionOutcome` (final result, restart count, `StopReason`).
Platform-agnostic, built on the `ProcessRunner` seam: `with_runner(&group)`
supervises inside one shared kill-on-drop group; doubles make it hermetic.
- Stats sampling over time (`stats` feature): `ProcessGroup::sample_stats(every)`
yields a `Stream` of `ProcessGroupStats` snapshots (first sample immediate,
missed ticks skipped, a zero interval clamped to 1 ms, series ends when the
group can no longer report), and
`RunningProcess::profile(every)` runs a child to completion while sampling it,
returning a `RunProfile` summary (exit code, wall duration, last CPU reading,
peak RSS, sample count, derived `avg_cpu()`).
- Tree inspection: `ProcessGroup::members()` snapshots the live member pids
(whole tree via the Windows Job Object pid list / Linux `cgroup.procs`;
tracked group leaders only on the POSIX process-group backends; always empty
with no containment), and a free `wait_any` races several `RunningProcess`es
and returns the index + exit code of whichever exits first — contenders are
only borrowed (the race is cancel-safe), so losers stay fully usable.
- Whole-tree signals and suspend/resume: `ProcessGroup::signal(Signal)` broadcasts
a signal to every member (new `Signal` enum — `Term`/`Kill`/`Int`/`Hup`/`Quit`/
`Usr1`/`Usr2` plus an `Other(i32)` escape hatch), and
`ProcessGroup::suspend`/`resume` freeze and thaw the tree. Per backend: Linux
cgroup uses a single whole-subtree `cgroup.freeze` write (falling back to
per-process `SIGSTOP`/`SIGCONT` on kernels without it), the POSIX process-group
backends
broadcast to each group, and Windows suspends/resumes every member thread
(best-effort; suspend counts nest; the walks are mutually exclusive with a
concurrent `spawn`'s assign-and-resume, so a mid-spawn child can't be
stranded suspended). On Windows only `Signal::Kill` is
deliverable (Job Object terminate); any other signal — and these operations on
the no-containment target — return the new typed `Error::Unsupported`.
- `ProcessGroupOptions` resource limits (behind the new, off-by-default `limits`
Cargo feature) — `memory_max`, `max_processes`, and `cpu_quota` cap a group's
whole tree at creation, plus a public `limits:
ResourceLimits` field. Enforced by the Windows Job Object (job memory limit,
active-process limit, hard CPU-rate cap) and Linux cgroup v2 (`memory.max` /
`pids.max` / `cpu.max`, enabling the matching controllers). `cpu_quota` is a
fraction of one core (`0.5` = half a core); on Windows it is converted against the
host CPU count and is approximate. Where no real container exists (macOS/BSD, the
Linux process-group fallback, the no-containment target) — or a Linux cgroup lacks
controller delegation — `ProcessGroup::with_options` fails fast with the new
`Error::ResourceLimit` rather than handing back an unbounded group.
## [0.6.1] - 2026-06-03
### Added
-
### Changed
- Move the Testing and Releasing guides out of `README.md` into a dedicated
`CONTRIBUTING.md`, keeping the README focused on usage.
### Fixed
-
## [0.6.0] - 2026-06-03
### Added
- `probe` — run a predicate command and read its exit code as a `bool`: exit `0` →
`Ok(true)`, exit `1` → `Ok(false)`, anything else → `Err` (other code / timeout /
signal-kill). On `Command`, `CliClient`, and `ProcessRunnerExt`. Collapses the
`match code { 0 => …, 1 => …, _ => Err }` idiom (`git diff --quiet`, `grep -q`, …).
- `Command::retry(max_attempts, backoff, retry_if)` — replay the run while
`retry_if(&Error)` accepts the failure, with fixed backoff. Honored by the
success-checking helpers (`run`/`exit_code`/`probe` and the `CliClient`
`text`/`unit`/`code`/`parse`/`try_parse` helpers); the non-erroring `output_string`/
`output_bytes`/`capture` paths don't retry. One-shot stdin sources can't replay.
### Changed
- `RunningProcess::stdout_lines` now honors the command's `timeout`: at the deadline
the process tree is killed and the stream ends, so a streamed run can no longer hang
past its timeout (`finish_streamed` then reports the kill — `code` is `None` on a Unix
signal-kill, a platform code on a Windows Job kill). Previously the timeout applied
only to the run-to-completion helpers.
### Fixed
- Linux (cgroup backend): `Drop` no longer leaks the cgroup directory. `cgroup.kill`
is asynchronous, so the immediate `rmdir` used to race the still-draining members
and fail with `EBUSY`; `Drop` now waits (bounded) for the subtree to drain first.
- Linux (cgroup backend, pre-5.14 kernels): the per-pid SIGKILL fallback no longer
busy-spins — it sleeps briefly between sweeps.
- Streaming: a panicking `on_stdout_line` / `on_stderr_line` handler no longer hangs a
`stdout_lines` consumer. The pump now closes its sink on any exit (including a panic
unwind), so the stream always ends instead of parking forever.
- Streaming: a second `stdout_lines()` call no longer silently discards the first call's
stderr (it previously overwrote the stderr sink, so `finish_streamed` returned empty).
- Test double: `Reply::timeout()` now reports the command's real configured deadline in
`Error::Timeout` (it previously surfaced a zero duration, diverging from the live runner).
## [0.5.2] - 2026-06-03
### Changed
- ci(release): push the release commit via a GitHub App token (App bypasses branch protection; no PAT expiry); attribute commit to owner (#1)
## [0.5.1] - 2026-06-02
### Added
-
### Changed
- `Error::diagnostic()` and `ProcessResult::diagnostic()` now return the message
trimmed of surrounding whitespace (the trailing newline a tool leaves on its
output is noise for a human-facing message). For the raw streams, match
`Error::Exit`'s fields or use `ProcessResult::stdout`/`stderr`.
### Fixed
-
## [0.5.0] - 2026-06-02
### Added
- `Error::Exit` now carries `stdout` alongside `stderr` (each truncated to 4 KiB),
so a failed `git`/`jj` run's stdout diagnostics (`CONFLICT (content): …`,
`nothing to commit, working tree clean`) survive the typed error instead of
being dropped.
- `Error::diagnostic()` and `ProcessResult::diagnostic()` — the best human message
for a failed run: standard error if it has text, otherwise standard output.
- `CliClient::default_env` / `default_env_remove` (and matching `cli_client!`
macro methods): set an environment variable on every command the client builds
(e.g. `GIT_TERMINAL_PROMPT=0`) instead of repeating it per call.
### Changed
- `ProcessResult::exit_code() -> i32` is replaced by `code() -> Option<i32>`:
a run that yields no code (killed by its timeout, or by a signal on Unix) is
`None` — the synthetic `-1` sentinel is gone. `RunningProcess::wait` and
`finish_streamed` likewise return `Option<i32>`. The `exit_code` convenience
helpers (`Command`/`ProcessRunnerExt`/`CliClient`) still return `Result<i32>`,
now surfacing a signal-kill as an IO error rather than `-1`.
- `CliClient::text` trims trailing whitespace only (`trim_end`), matching
`run` — previously it trimmed both ends.
### Fixed
- Windows: closed the spawn→assign race in the kill-on-close guarantee. A child
is now created `CREATE_SUSPENDED`, assigned to the Job Object, then resumed, so
a fast-forking child can no longer escape containment in the window between
spawn and assignment.
## [0.4.1] - 2026-06-02
### Changed
- review: harden macOS/BSD process-group containment
## [0.4.0] - 2026-06-01
### Added
- macOS and the BSDs now contain process trees with a POSIX process group
(`killpg` on drop) instead of a plain, uncontained spawn — `mechanism()`
reports `ProcessGroup` there rather than `None`. The shared backend is the same
one Linux already uses when no cgroup is writable.
### Changed
-
### Fixed
-
## [0.3.4] - 2026-06-01
### Changed
- Release: reject dispatch from any ref other than main
- Stop tracking agent-instruction files (AGENTS.md, CLAUDE.md, .claude/) — keep them local only
## [0.3.3] - 2026-06-01
### Changed
- Release: always target main (check out + push main regardless of the dispatch ref)
## [0.3.2] - 2026-06-01
### Changed
- Release: publish to crates.io before tagging + retry/idempotent publish & GitHub Release, --locked
## [0.3.1] - 2026-06-01
### Added
- Async stdin/stdout usage examples on `RunningProcess::standard_input` and
`RunningProcess::stdout_lines`, plus a `StreamExt` re-export so callers can
consume the `stdout_lines` stream with `use processkit::StreamExt;` (no direct
`tokio-stream` dependency).
### Changed
-
### Fixed
- `Command::first_line` now honors the command's `timeout` while streaming. It
previously enforced the deadline only on the run-to-completion path, so a
command that produced no matching line (e.g. a silent long-running process)
could hang forever; it now returns `Error::Timeout` once the deadline elapses.
## [0.3.0] - 2026-06-01
### Changed
- **Timeouts are now a first-class `Error::Timeout`** on the success-checking
helpers. `ProcessResult::ensure_success` (hence `ProcessRunnerExt::run`/`checked`,
`CliClient::text`/`unit`/`parse`/`try_parse`, and `Command::run`) and
`ProcessRunnerExt::exit_code` / `CliClient::code` / `Command::exit_code` now return
`Error::Timeout` for a run killed by its deadline, instead of folding it into
`Error::Exit { code: -1 }` / a synthetic `-1`.
`capture`/`output` still expose the inspectable `ProcessResult::timed_out()`
without erroring. **Breaking:** a timeout that previously surfaced as `Error::Exit`
is now `Error::Timeout` (the variant was formerly unreachable).
### Added
- `Reply::timeout()` — a canned `ScriptedRunner` reply that drives the timeout
path, so tests can assert that a command exceeding its deadline surfaces as
`Error::Timeout`.
## [0.2.0] - 2026-06-01
### Changed
- Release workflow: pick the version bump from a menu, with auto-increment.
(Release tooling only — no changes to the published library.)
## [0.1.2] - 2026-05-31
_No functional changes — republished to recover a failed crates.io upload; the
first version to actually reach crates.io._
## [0.1.1] - 2026-05-31
_No functional changes — republished to recover a failed crates.io upload._
## [0.1.0] - 2026-05-31
### Added
- `ProcessGroup` — a kill-on-drop container for a child-process tree, backed by
Windows Job Objects, Linux cgroup v2 (with a POSIX process-group fallback), or
no containment elsewhere. Async `shutdown` performs a graceful
SIGTERM → wait → SIGKILL teardown on Unix; the mechanism in effect is
observable via `Mechanism`.
- `Command` builder and async run-and-capture helpers: `output_string`,
`output_bytes`, `exit_code`, `run`, `first_line`, and `start` (live handle).
- `RunningProcess` handle with incremental `stdout_lines` streaming (stderr
drained in the background), `output_string`/`output_bytes`/`wait`, and process
metadata.
- `ProcessResult<T>` with `is_success` / `ensure_success`, and a structured
`Error` (`Spawn` / `Exit` / `Timeout` / `Io`).
- `Stdin` sources: `empty`, `from_string`, `from_bytes`, `from_file`,
`from_iter_lines`, `from_reader`, and `from_lines` (async stream).
- `ProcessRunner` mock seam with `JobRunner`, `ScriptedRunner`,
`RecordingRunner`, and a `mock`-feature `MockRunner`.
- Interactive stdin: `Command::keep_stdin_open` plus `RunningProcess::standard_input`
returning a `ProcessStdin` writer (`write`/`write_line`/`flush`/`finish`).
- Push line-handlers: `Command::on_stdout_line` / `on_stderr_line`, invoked per
decoded line as it is read.
- Output-buffer policy: `OutputBufferPolicy` (`bounded`/`unbounded`) with
`OverflowMode::{DropOldest, DropNewest}`, plus exact `RunningProcess::stdout_line_count`
/ `stderr_line_count` (count survives dropped lines).
- Encoding overrides: `Command::stdout_encoding` / `stderr_encoding` / `encoding`
to decode non-UTF-8 legacy output (via `encoding_rs`); default stays UTF-8.
- Diagnostics: `ProcessGroup::stats` → `ProcessGroupStats` (active count, and
CPU/peak-memory where the platform reports them), and per-process
`RunningProcess::cpu_time` / `peak_memory_bytes` / `elapsed`.
- `CliClient<R>` + the `cli_client!` macro — a reusable core for building typed
wrappers around an external CLI tool (`command`/`command_in` builders;
`text`/`capture`/`unit`/`code`/`parse`/`try_parse` run helpers), with the
runner injectable for hermetic tests.
- Top-level `processkit::run` / `processkit::output` free functions.
- Public `Command` accessors (`program`/`arguments`/`working_dir`/
`env_overrides`/`stdin_source`/`configured_timeout`) so external
`ScriptedRunner::when` predicates can inspect a command; plus public
`Command::to_tokio_command`.
- `ProcessRunnerExt::checked`, `ProcessResult::combined`, `Invocation::args_str`,
`RunningProcess::finish_streamed` (exit code + collected stderr after
streaming) and `RunningProcess::start_kill`.
- `Error::Parse { program, message }` for fallible output parsing.
- The `tracing` feature emits a per-run `debug` event (program, exit code,
timed-out, elapsed) on the `processkit` target.
### Changed
- Output capture is line-oriented (pumped): captured text is normalized to
`\n` line endings. `output_bytes` still returns exact raw stdout.
[Unreleased]: https://github.com/ZelAnton/ProcessKit-rs/compare/v0.9.2...HEAD
[0.9.2]: https://github.com/ZelAnton/ProcessKit-rs/compare/v0.9.1...v0.9.2
[0.9.1]: https://github.com/ZelAnton/ProcessKit-rs/compare/v0.9.0...v0.9.1
[0.9.0]: https://github.com/ZelAnton/ProcessKit-rs/compare/v0.8.2...v0.9.0
[0.8.2]: https://github.com/ZelAnton/ProcessKit-rs/compare/v0.8.1...v0.8.2
[0.8.1]: https://github.com/ZelAnton/ProcessKit-rs/compare/v0.8.0...v0.8.1
[0.8.0]: https://github.com/ZelAnton/ProcessKit-rs/compare/v0.7.1...v0.8.0
[0.7.1]: https://github.com/ZelAnton/ProcessKit-rs/compare/v0.7.0...v0.7.1
[0.6.2]: https://github.com/ZelAnton/ProcessKit-rs/releases/tag/v0.6.2
[0.7.0]: https://github.com/ZelAnton/ProcessKit-rs/compare/v0.6.1...v0.7.0
[0.6.1]: https://github.com/ZelAnton/ProcessKit-rs/compare/v0.6.0...v0.6.1
[0.6.0]: https://github.com/ZelAnton/ProcessKit-rs/compare/v0.5.2...v0.6.0
[0.5.2]: https://github.com/ZelAnton/ProcessKit-rs/compare/v0.5.1...v0.5.2
[0.5.1]: https://github.com/ZelAnton/ProcessKit-rs/compare/v0.5.0...v0.5.1
[0.5.0]: https://github.com/ZelAnton/ProcessKit-rs/compare/v0.4.1...v0.5.0
[0.4.1]: https://github.com/ZelAnton/ProcessKit-rs/compare/v0.4.0...v0.4.1
[0.4.0]: https://github.com/ZelAnton/ProcessKit-rs/compare/v0.3.4...v0.4.0
[0.3.4]: https://github.com/ZelAnton/ProcessKit-rs/compare/v0.3.3...v0.3.4
[0.3.3]: https://github.com/ZelAnton/ProcessKit-rs/compare/v0.3.2...v0.3.3
[0.3.2]: https://github.com/ZelAnton/ProcessKit-rs/compare/v0.3.1...v0.3.2
[0.3.1]: https://github.com/ZelAnton/ProcessKit-rs/compare/v0.3.0...v0.3.1
[0.3.0]: https://github.com/ZelAnton/ProcessKit-rs/compare/v0.2.0...v0.3.0
[0.2.0]: https://github.com/ZelAnton/ProcessKit-rs/compare/v0.1.2...v0.2.0
[0.1.2]: https://github.com/ZelAnton/ProcessKit-rs/compare/v0.1.1...v0.1.2
[0.1.1]: https://github.com/ZelAnton/ProcessKit-rs/compare/v0.1.0...v0.1.1
[0.1.0]: https://github.com/ZelAnton/ProcessKit-rs/releases/tag/v0.1.0
