pingora-core 0.9.1

// Copyright 2026 Cloudflare, Inc.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

//! HTTP server session APIs

use super::custom::server::Session as SessionCustom;
use super::error_resp;
use super::subrequest::server::HttpSession as SessionSubrequest;
use super::v1::server::HttpSession as SessionV1;
use super::v2::server::{HttpSession as SessionV2, Idle};
use super::HttpTask;
use crate::custom_session;
use crate::protocols::{Digest, SocketAddr, Stream};
use bytes::{Bytes, BytesMut};
use http::HeaderValue;
use http::{header::AsHeaderName, HeaderMap};
use pingora_error::{Error, Result};
use pingora_http::{RequestHeader, ResponseHeader};
use std::any::Any;
use std::time::Duration;

/// A reusable HTTP/1.x stream and bytes already read for the next request.
#[derive(Debug)]
pub struct ReusableHttpStream {
    stream: Stream,
    pipelined_prefix: Option<BytesMut>,
}

impl ReusableHttpStream {
    pub(crate) fn new(stream: Stream, pipelined_prefix: Option<BytesMut>) -> Self {
        Self {
            stream,
            pipelined_prefix,
        }
    }

    /// Split the reusable connection into its underlying stream and optional
    /// bytes already read for the next pipelined request.
    pub fn into_parts(self) -> (Stream, Option<BytesMut>) {
        (self.stream, self.pipelined_prefix)
    }
}

/// HTTP server session object for both HTTP/1.x and HTTP/2
pub enum Session {
    H1(SessionV1),
    H2(SessionV2),
    Subrequest(SessionSubrequest),
    Custom(Box<dyn SessionCustom>),
}

impl Session {
    /// Create a new [`Session`] from an established connection for HTTP/1.x
    pub fn new_http1(stream: Stream) -> Self {
        Self::H1(SessionV1::new(stream))
    }

    /// Create a new [`Session`] from an established HTTP/2 stream
    pub fn new_http2(session: SessionV2) -> Self {
        Self::H2(session)
    }

    /// Create a new [`Session`] from a subrequest session
    pub fn new_subrequest(session: SessionSubrequest) -> Self {
        Self::Subrequest(session)
    }

    /// Create a new [`Session`] from a custom session
    pub fn new_custom(session: Box<dyn SessionCustom>) -> Self {
        Self::Custom(session)
    }

    /// Whether the session is HTTP/2. If not it is HTTP/1.x
    pub fn is_http2(&self) -> bool {
        matches!(self, Self::H2(_))
    }

    /// Whether the session is for a subrequest.
    pub fn is_subrequest(&self) -> bool {
        matches!(self, Self::Subrequest(_))
    }

    /// Whether the session is Custom
    pub fn is_custom(&self) -> bool {
        matches!(self, Self::Custom(_))
    }

    /// Return a stable, human-readable label for this downstream session type.
    pub fn session_type(&self) -> &'static str {
        match self {
            Self::H1(_) => "h1",
            Self::H2(_) => "h2",
            Self::Subrequest(_) => "subrequest",
            Self::Custom(_) => "custom",
        }
    }

    /// Read the request header. This method is required to be called first before doing anything
    /// else with the session.
    /// - `Ok(true)`: successful
    /// - `Ok(false)`: client exit without sending any bytes. This is normal on reused connection.
    ///   In this case the user should give up this session.
    pub async fn read_request(&mut self) -> Result<bool> {
        match self {
            Self::H1(s) => {
                let read = s.read_request().await?;
                Ok(read.is_some())
            }
            // This call will always return `Ok(true)` for Http2 because the request is already read
            Self::H2(_) => Ok(true),
            Self::Subrequest(s) => {
                let read = s.read_request().await?;
                Ok(read.is_some())
            }
            Self::Custom(_) => Ok(true),
        }
    }

    /// Return the request header it just read.
    /// # Panic
    /// This function will panic if [`Self::read_request()`] is not called.
    pub fn req_header(&self) -> &RequestHeader {
        match self {
            Self::H1(s) => s.req_header(),
            Self::H2(s) => s.req_header(),
            Self::Subrequest(s) => s.req_header(),
            Self::Custom(s) => s.req_header(),
        }
    }

    /// Return a mutable reference to request header it just read.
    /// # Panic
    /// This function will panic if [`Self::read_request()`] is not called.
    pub fn req_header_mut(&mut self) -> &mut RequestHeader {
        match self {
            Self::H1(s) => s.req_header_mut(),
            Self::H2(s) => s.req_header_mut(),
            Self::Subrequest(s) => s.req_header_mut(),
            Self::Custom(s) => s.req_header_mut(),
        }
    }

    /// Return the header by name. None if the header doesn't exist.
    ///
    /// In case there are multiple headers under the same name, the first one will be returned. To
    /// get all the headers: use `self.req_header().headers.get_all()`.
    pub fn get_header<K: AsHeaderName>(&self, key: K) -> Option<&HeaderValue> {
        self.req_header().headers.get(key)
    }

    /// Get the header value in its raw format.
    /// If the header doesn't exist, return an empty slice.
    pub fn get_header_bytes<K: AsHeaderName>(&self, key: K) -> &[u8] {
        self.get_header(key).map_or(b"", |v| v.as_bytes())
    }

    /// Read the request body. Ok(None) if no (more) body to read
    pub async fn read_request_body(&mut self) -> Result<Option<Bytes>> {
        match self {
            Self::H1(s) => s.read_body_bytes().await,
            Self::H2(s) => s.read_body_bytes().await,
            Self::Subrequest(s) => s.read_body_bytes().await,
            Self::Custom(s) => s.read_body_bytes().await,
        }
    }

    /// Discard the request body by reading it until completion.
    ///
    /// This is useful for making streams reusable (in particular for HTTP/1.1) after returning an
    /// error before the whole body has been read.
    pub async fn drain_request_body(&mut self) -> Result<()> {
        match self {
            Self::H1(s) => s.drain_request_body().await,
            Self::H2(s) => s.drain_request_body().await,
            Self::Subrequest(s) => s.drain_request_body().await,
            Self::Custom(s) => s.drain_request_body().await,
        }
    }

    /// Write the response header to client
    /// Informational headers (status code 100-199, excluding 101) can be written multiple times the final
    /// response header (status code 200+ or 101) is written.
    pub async fn write_response_header(&mut self, resp: Box<ResponseHeader>) -> Result<()> {
        match self {
            Self::H1(s) => {
                s.write_response_header(resp).await?;
                Ok(())
            }
            Self::H2(s) => s.write_response_header(resp, false),
            Self::Subrequest(s) => {
                s.write_response_header(resp).await?;
                Ok(())
            }
            Self::Custom(s) => s.write_response_header(resp, false).await,
        }
    }

    /// Similar to `write_response_header()`, this fn will clone the `resp` internally
    pub async fn write_response_header_ref(&mut self, resp: &ResponseHeader) -> Result<()> {
        match self {
            Self::H1(s) => {
                s.write_response_header_ref(resp).await?;
                Ok(())
            }
            Self::H2(s) => s.write_response_header_ref(resp, false),
            Self::Subrequest(s) => {
                s.write_response_header_ref(resp).await?;
                Ok(())
            }
            Self::Custom(s) => s.write_response_header_ref(resp, false).await,
        }
    }

    /// Write the response body to client
    pub async fn write_response_body(&mut self, data: Bytes, end: bool) -> Result<()> {
        if data.is_empty() && !end {
            // writing 0 byte to a chunked encoding h1 would finish the stream
            // writing 0 bytes to h2 is noop
            // we don't want to actually write in either cases
            return Ok(());
        }
        match self {
            Self::H1(s) => {
                if !data.is_empty() {
                    s.write_body(&data).await?;
                }
                if end {
                    s.finish_body().await?;
                }
                Ok(())
            }
            Self::H2(s) => s.write_body(data, end).await,
            Self::Subrequest(s) => {
                s.write_body(data).await?;
                Ok(())
            }
            Self::Custom(s) => s.write_body(data, end).await,
        }
    }

    /// Write the response trailers to client
    pub async fn write_response_trailers(&mut self, trailers: HeaderMap) -> Result<()> {
        match self {
            Self::H1(_) => Ok(()), // TODO: support trailers for h1
            Self::H2(s) => s.write_trailers(trailers),
            Self::Subrequest(s) => s.write_trailers(Some(Box::new(trailers))).await,
            Self::Custom(s) => s.write_trailers(trailers).await,
        }
    }

    /// Finish the life of this request and return a reusable stream, if any.
    ///
    /// For H1, if connection reuse is supported, a reusable stream will be returned,
    /// otherwise None.
    /// For H2, always return None because H2 stream is not reusable.
    /// For subrequests, there is no true underlying stream to return.
    pub async fn finish(self) -> Result<Option<ReusableHttpStream>> {
        match self {
            Self::H1(mut s) => {
                // need to flush body due to buffering
                s.finish_body().await?;
                s.reuse().await
            }
            Self::H2(mut s) => {
                s.finish()?;
                Ok(None)
            }
            Self::Subrequest(mut s) => {
                s.finish().await?;
                Ok(None)
            }
            Self::Custom(mut s) => {
                s.finish().await?;
                Ok(None)
            }
        }
    }

    /// Callback for cleanup logic on downstream specifically when we fail to proxy the session
    /// other than cleanup via finish().
    ///
    /// If caching the downstream failure may be independent of (and precede) an upstream error in
    /// which case this function may be called more than once.
    pub fn on_proxy_failure(&mut self, e: Box<Error>) {
        match self {
            Self::H1(_) | Self::H2(_) | Self::Custom(_) => {
                // all cleanup logic handled in finish(),
                // stream and resources dropped when session dropped
            }
            Self::Subrequest(ref mut s) => s.on_proxy_failure(e),
        }
    }

    pub async fn response_duplex_vec(&mut self, tasks: Vec<HttpTask>) -> Result<bool> {
        match self {
            Self::H1(s) => s.response_duplex_vec(tasks).await,
            Self::H2(s) => s.response_duplex_vec(tasks).await,
            Self::Subrequest(s) => s.response_duplex_vec(tasks).await,
            Self::Custom(s) => s.response_duplex_vec(tasks).await,
        }
    }

    /// Set connection reuse. `duration` defines how long the connection is kept open for the next
    /// request to reuse. Noop for h2 and subrequest
    pub fn set_keepalive(&mut self, duration: Option<u64>) {
        match self {
            Self::H1(s) => s.set_server_keepalive(duration),
            Self::H2(_) => {}
            Self::Subrequest(_) => {}
            Self::Custom(_) => {}
        }
    }

    /// Get the keepalive timeout. None if keepalive is disabled. Not applicable for h2 or
    /// subrequest
    pub fn get_keepalive(&self) -> Option<u64> {
        match self {
            Self::H1(s) => s.get_keepalive_timeout(),
            Self::H2(_) => None,
            Self::Subrequest(_) => None,
            Self::Custom(_) => None,
        }
    }

    /// Set the number of times the upstream connection connection for this
    /// session can be reused via keepalive. Noop for h2 and subrequest
    pub fn set_keepalive_reuses_remaining(&mut self, reuses: Option<u32>) {
        if let Self::H1(s) = self {
            s.set_keepalive_reuses_remaining(reuses);
        }
    }

    /// Get the number of times the upstream connection connection for this
    /// session can be reused via keepalive. Not applicable for h2 or
    /// subrequest
    pub fn get_keepalive_reuses_remaining(&self) -> Option<u32> {
        if let Self::H1(s) = self {
            s.get_keepalive_reuses_remaining()
        } else {
            None
        }
    }

    /// Set user-defined context to carry across requests on the same keepalive connection.
    ///
    /// Only applicable for HTTP/1.x connections; noop for h2, subrequest, and custom sessions.
    pub fn set_connection_user_context(&mut self, ctx: Option<Box<dyn Any + Send + Sync>>) {
        if let Self::H1(s) = self {
            s.set_connection_user_context(ctx);
        }
    }

    /// Take the user-defined context from the previous request on this keepalive connection.
    ///
    /// Returns `None` for h2, subrequest, and custom sessions, or if no context was persisted.
    pub fn take_connection_user_context(&mut self) -> Option<Box<dyn Any + Send + Sync>> {
        if let Self::H1(s) = self {
            s.take_connection_user_context()
        } else {
            None
        }
    }

    /// Sets the downstream read timeout. This will trigger if we're unable
    /// to read from the stream after `timeout`.
    ///
    /// This is a noop for h2.
    pub fn set_read_timeout(&mut self, timeout: Option<Duration>) {
        match self {
            Self::H1(s) => s.set_read_timeout(timeout),
            Self::H2(_) => {}
            Self::Subrequest(s) => s.set_read_timeout(timeout),
            Self::Custom(c) => c.set_read_timeout(timeout),
        }
    }

    /// Gets the downstream read timeout if set.
    pub fn get_read_timeout(&self) -> Option<Duration> {
        match self {
            Self::H1(s) => s.get_read_timeout(),
            Self::H2(_) => None,
            Self::Subrequest(s) => s.get_read_timeout(),
            Self::Custom(s) => s.get_read_timeout(),
        }
    }

    /// Sets the downstream write timeout. This will trigger if we're unable
    /// to write to the stream after `timeout`. If a `min_send_rate` is
    /// configured then the `min_send_rate` calculated timeout has higher priority.
    pub fn set_write_timeout(&mut self, timeout: Option<Duration>) {
        match self {
            Self::H1(s) => s.set_write_timeout(timeout),
            Self::H2(s) => s.set_write_timeout(timeout),
            Self::Subrequest(s) => s.set_write_timeout(timeout),
            Self::Custom(c) => c.set_write_timeout(timeout),
        }
    }

    /// Gets the downstream write timeout if set.
    pub fn get_write_timeout(&self) -> Option<Duration> {
        match self {
            Self::H1(s) => s.get_write_timeout(),
            Self::H2(s) => s.get_write_timeout(),
            Self::Subrequest(s) => s.get_write_timeout(),
            Self::Custom(s) => s.get_write_timeout(),
        }
    }

    /// Sets the total drain timeout, which will be applied while discarding the
    /// request body using `drain_request_body`.
    ///
    /// For HTTP/1.1, reusing a session requires ensuring that the request body
    /// is consumed. If the timeout is exceeded, the caller should give up on
    /// trying to reuse the session.
    pub fn set_total_drain_timeout(&mut self, timeout: Option<Duration>) {
        match self {
            Self::H1(s) => s.set_total_drain_timeout(timeout),
            Self::H2(s) => s.set_total_drain_timeout(timeout),
            Self::Subrequest(s) => s.set_total_drain_timeout(timeout),
            Self::Custom(c) => c.set_total_drain_timeout(timeout),
        }
    }

    /// Gets the total drain timeout if set.
    pub fn get_total_drain_timeout(&self) -> Option<Duration> {
        match self {
            Self::H1(s) => s.get_total_drain_timeout(),
            Self::H2(s) => s.get_total_drain_timeout(),
            Self::Subrequest(s) => s.get_total_drain_timeout(),
            Self::Custom(s) => s.get_total_drain_timeout(),
        }
    }

    /// Sets the minimum downstream send rate in bytes per second. This
    /// is used to calculate a write timeout in seconds based on the size
    /// of the buffer being written. If a `min_send_rate` is configured it
    /// has higher priority over a set `write_timeout`. The minimum send
    /// rate must be greater than zero.
    ///
    /// Calculated write timeout is guaranteed to be at least 1s if `min_send_rate`
    /// is greater than zero, a send rate of zero is equivalent to disabling.
    ///
    /// This is a noop for h2.
    pub fn set_min_send_rate(&mut self, rate: Option<usize>) {
        match self {
            Self::H1(s) => s.set_min_send_rate(rate),
            Self::H2(_) => {}
            Self::Subrequest(_) => {}
            Self::Custom(_) => {}
        }
    }

    /// Sets whether we ignore writing informational responses downstream.
    ///
    /// For HTTP/1.1 this is a noop if the response is Upgrade or Continue and
    /// Expect: 100-continue was set on the request.
    ///
    /// This is a noop for h2 because informational responses are always ignored.
    /// Subrequests will always proxy the info response and let the true downstream
    /// decide to ignore or not.
    pub fn set_ignore_info_resp(&mut self, ignore: bool) {
        match self {
            Self::H1(s) => s.set_ignore_info_resp(ignore),
            Self::H2(_) => {} // always ignored
            Self::Subrequest(_) => {}
            Self::Custom(_) => {} // always ignored
        }
    }

    /// Sets whether keepalive should be disabled if response is written prior to
    /// downstream body finishing.
    ///
    /// This is a noop for h2.
    pub fn set_close_on_response_before_downstream_finish(&mut self, close: bool) {
        match self {
            Self::H1(s) => s.set_close_on_response_before_downstream_finish(close),
            Self::H2(_) => {}         // always ignored
            Self::Subrequest(_) => {} // always ignored
            Self::Custom(_) => {}     // always ignored
        }
    }

    /// Controls behaviour when the client closes the connection after the request body.
    ///
    /// When **enabled** (default), a client close is returned as a `ConnectionClosed`
    /// error so the proxy aborts immediately. When **disabled**, `read_body_or_idle`
    /// stays pending so the proxy can finish delivering the upstream response.
    ///
    /// Only meaningful for H1 (TCP). Noop for H2/subrequest/custom.
    pub fn set_abort_on_close(&mut self, abort: bool) {
        match self {
            Self::H1(s) => s.set_abort_on_close(abort),
            Self::H2(_) => {}
            Self::Subrequest(_) => {}
            Self::Custom(_) => {}
        }
    }

    /// Return a digest of the request including the method, path and Host header
    // TODO: make this use a `Formatter`
    pub fn request_summary(&self) -> String {
        match self {
            Self::H1(s) => s.request_summary(),
            Self::H2(s) => s.request_summary(),
            Self::Subrequest(s) => s.request_summary(),
            Self::Custom(s) => s.request_summary(),
        }
    }

    /// Return the written response header. `None` if it is not written yet.
    /// Only the final (status code >= 200 or 101) response header will be returned
    pub fn response_written(&self) -> Option<&ResponseHeader> {
        match self {
            Self::H1(s) => s.response_written(),
            Self::H2(s) => s.response_written(),
            Self::Subrequest(s) => s.response_written(),
            Self::Custom(s) => s.response_written(),
        }
    }

    /// Give up the http session abruptly.
    ///
    /// This is a failure path: the response is abandoned mid-message, so each
    /// protocol signals it in whatever way lets the peer tell this apart from a
    /// response that was completed.
    /// For H1 this will close the underlying connection
    /// For H2 this will send RESET frame to end this stream without impacting the connection
    /// For subrequests, this will drop task senders and receivers.
    pub async fn shutdown(&mut self) {
        match self {
            Self::H1(s) => s.shutdown().await,
            Self::H2(s) => s.shutdown(),
            Self::Subrequest(s) => s.shutdown(),
            Self::Custom(s) => s.abandon("shutdown").await,
        }
    }

    /// Give up the H2 stream with a custom reason.
    ///
    /// For H2, this sends a `RST_STREAM` frame with the specified reason.
    /// For H1, subrequests, and custom sessions, this is a no-op since they don't support
    /// stream reset reasons.
    ///
    /// See [`super::v2::server::HttpSession::shutdown_with_reason`] for available reasons.
    pub fn shutdown_with_reason(&mut self, reason: h2::Reason) {
        if let Self::H2(s) = self {
            s.shutdown_with_reason(reason);
        }
    }

    pub fn to_h1_raw(&self) -> Bytes {
        match self {
            Self::H1(s) => s.get_headers_raw_bytes(),
            Self::H2(s) => s.pseudo_raw_h1_request_header(),
            Self::Subrequest(s) => s.get_headers_raw_bytes(),
            Self::Custom(c) => c.pseudo_raw_h1_request_header(),
        }
    }

    /// Whether the whole request body is sent
    pub fn is_body_done(&mut self) -> bool {
        match self {
            Self::H1(s) => s.is_body_done(),
            Self::H2(s) => s.is_body_done(),
            Self::Subrequest(s) => s.is_body_done(),
            Self::Custom(s) => s.is_body_done(),
        }
    }

    /// Notify the client that the entire body is sent
    /// for H1 chunked encoding, this will end the last empty chunk
    /// for H1 content-length, this has no effect.
    /// for H2, this will send an empty DATA frame with END_STREAM flag
    /// for subrequest, this will send a Done http task
    pub async fn finish_body(&mut self) -> Result<()> {
        match self {
            Self::H1(s) => s.finish_body().await.map(|_| ()),
            Self::H2(s) => s.finish(),
            Self::Subrequest(s) => s.finish().await.map(|_| ()),
            Self::Custom(s) => s.finish().await,
        }
    }

    pub fn generate_error(error: u16) -> ResponseHeader {
        match error {
            /* common error responses are pre-generated */
            502 => error_resp::HTTP_502_RESPONSE.clone(),
            400 => error_resp::HTTP_400_RESPONSE.clone(),
            _ => error_resp::gen_error_response(error),
        }
    }

    /// Send error response to client using a pre-generated error message.
    pub async fn respond_error(&mut self, error: u16) -> Result<()> {
        self.respond_error_with_body(error, Bytes::default()).await
    }

    /// Send error response to client using a pre-generated error message and custom body.
    pub async fn respond_error_with_body(&mut self, error: u16, body: Bytes) -> Result<()> {
        let mut resp = Self::generate_error(error);
        if !body.is_empty() {
            // error responses have a default content-length of zero
            resp.set_content_length(body.len())?
        }
        self.write_error_response(resp, body).await
    }

    /// Send an error response to a client with a response header and body.
    pub async fn write_error_response(&mut self, resp: ResponseHeader, body: Bytes) -> Result<()> {
        // TODO: we shouldn't be closing downstream connections on internally generated errors
        // and possibly other upstream connect() errors (connection refused, timeout, etc)
        //
        // This change is only here because we DO NOT re-use downstream connections
        // today on these errors and we should signal to the client that pingora is dropping it
        // rather than a misleading the client with 'keep-alive'
        self.set_keepalive(None);

        // If a response was already written and it's not informational 1xx, return.
        // The only exception is an informational 101 Switching Protocols, which is treated
        // as final response https://www.rfc-editor.org/rfc/rfc9110#section-15.2.2.
        if let Some(resp_written) = self.response_written().as_ref() {
            if !resp_written.status.is_informational() || resp_written.status == 101 {
                return Ok(());
            }
        }

        self.write_response_header(Box::new(resp)).await?;

        if !body.is_empty() {
            self.write_response_body(body, true).await?;
        } else {
            self.finish_body().await?;
        }

        custom_session!(self.finish_custom().await?);

        Ok(())
    }

    /// Whether there is no request body
    pub fn is_body_empty(&mut self) -> bool {
        match self {
            Self::H1(s) => s.is_body_empty(),
            Self::H2(s) => s.is_body_empty(),
            Self::Subrequest(s) => s.is_body_empty(),
            Self::Custom(s) => s.is_body_empty(),
        }
    }

    pub fn retry_buffer_truncated(&self) -> bool {
        match self {
            Self::H1(s) => s.retry_buffer_truncated(),
            Self::H2(s) => s.retry_buffer_truncated(),
            Self::Subrequest(s) => s.retry_buffer_truncated(),
            Self::Custom(s) => s.retry_buffer_truncated(),
        }
    }

    pub fn enable_retry_buffering(&mut self) {
        match self {
            Self::H1(s) => s.enable_retry_buffering(),
            Self::H2(s) => s.enable_retry_buffering(),
            Self::Subrequest(s) => s.enable_retry_buffering(),
            Self::Custom(s) => s.enable_retry_buffering(),
        }
    }

    pub fn get_retry_buffer(&self) -> Option<Bytes> {
        match self {
            Self::H1(s) => s.get_retry_buffer(),
            Self::H2(s) => s.get_retry_buffer(),
            Self::Subrequest(s) => s.get_retry_buffer(),
            Self::Custom(s) => s.get_retry_buffer(),
        }
    }

    /// Read body (same as `read_request_body()`) or pending forever until downstream
    /// terminates the session.
    pub async fn read_body_or_idle(&mut self, no_body_expected: bool) -> Result<Option<Bytes>> {
        match self {
            Self::H1(s) => s.read_body_or_idle(no_body_expected).await,
            Self::H2(s) => s.read_body_or_idle(no_body_expected).await,
            Self::Subrequest(s) => s.read_body_or_idle(no_body_expected).await,
            Self::Custom(s) => s.read_body_or_idle(no_body_expected).await,
        }
    }

    /// Return an [`Idle`] future that waits for this H2 stream to close without
    /// reading any body data.
    ///
    /// For HTTP/2 this resolves when the client resets the stream (`RST_STREAM`),
    /// cleanly closes the stream, or the stream errors. Other protocols have no
    /// out-of-band close signal, so this returns `None` for them.
    pub fn watch_h2_stream_close(&mut self) -> Option<Idle<'_>> {
        match self {
            Self::H2(s) => Some(s.idle()),
            _ => None,
        }
    }

    pub fn as_http1(&self) -> Option<&SessionV1> {
        match self {
            Self::H1(s) => Some(s),
            Self::H2(_) => None,
            Self::Subrequest(_) => None,
            Self::Custom(_) => None,
        }
    }

    pub fn as_http2(&self) -> Option<&SessionV2> {
        match self {
            Self::H1(_) => None,
            Self::H2(s) => Some(s),
            Self::Subrequest(_) => None,
            Self::Custom(_) => None,
        }
    }

    pub fn as_subrequest(&self) -> Option<&SessionSubrequest> {
        match self {
            Self::H1(_) => None,
            Self::H2(_) => None,
            Self::Subrequest(s) => Some(s),
            Self::Custom(_) => None,
        }
    }

    pub fn as_subrequest_mut(&mut self) -> Option<&mut SessionSubrequest> {
        match self {
            Self::H1(_) => None,
            Self::H2(_) => None,
            Self::Subrequest(s) => Some(s),
            Self::Custom(_) => None,
        }
    }

    pub fn as_custom(&self) -> Option<&dyn SessionCustom> {
        match self {
            Self::H1(_) => None,
            Self::H2(_) => None,
            Self::Subrequest(_) => None,
            Self::Custom(c) => Some(c.as_ref()),
        }
    }

    pub fn as_custom_mut(&mut self) -> Option<&mut Box<dyn SessionCustom>> {
        match self {
            Self::H1(_) => None,
            Self::H2(_) => None,
            Self::Subrequest(_) => None,
            Self::Custom(c) => Some(c),
        }
    }

    /// Write a 100 Continue response to the client.
    pub async fn write_continue_response(&mut self) -> Result<()> {
        match self {
            Self::H1(s) => s.write_continue_response().await,
            Self::H2(s) => s.write_response_header(
                Box::new(ResponseHeader::build(100, Some(0)).unwrap()),
                false,
            ),
            Self::Subrequest(s) => s.write_continue_response().await,
            // TODO(slava): is there any write_continue_response calls?
            Self::Custom(s) => {
                s.write_response_header(
                    Box::new(ResponseHeader::build(100, Some(0)).unwrap()),
                    false,
                )
                .await
            }
        }
    }

    /// Whether this request is for upgrade (e.g., websocket).
    pub fn is_upgrade_req(&self) -> bool {
        match self {
            Self::H1(s) => s.is_upgrade_req(),
            Self::H2(_) => false,
            Self::Subrequest(s) => s.is_upgrade_req(),
            Self::Custom(s) => s.is_upgrade_req(),
        }
    }

    /// Return whether this response completes an upgrade handshake.
    ///
    /// Returns `Some(true)` when an upgrade request gets an upgrade response,
    /// `Some(false)` when an upgrade request gets a non-upgrade response, and
    /// `None` when this request is not an upgrade.
    pub fn is_upgrade(&self, header: &ResponseHeader) -> Option<bool> {
        match self {
            Self::H1(s) => s.is_upgrade(header),
            Self::H2(_) => None,
            Self::Subrequest(s) => s.is_upgrade(header),
            Self::Custom(s) => {
                if s.is_upgrade_req() {
                    Some(super::v1::common::is_upgrade_resp(header))
                } else {
                    None
                }
            }
        }
    }

    /// Whether this session was fully upgraded (completed Upgrade handshake).
    pub fn was_upgraded(&self) -> bool {
        match self {
            Self::H1(s) => s.was_upgraded(),
            Self::H2(_) => false,
            Self::Subrequest(s) => s.was_upgraded(),
            Self::Custom(s) => s.was_upgraded(),
        }
    }

    /// Return how many response body bytes (application, not wire) already sent downstream
    pub fn body_bytes_sent(&self) -> usize {
        match self {
            Self::H1(s) => s.body_bytes_sent(),
            Self::H2(s) => s.body_bytes_sent(),
            Self::Subrequest(s) => s.body_bytes_sent(),
            Self::Custom(s) => s.body_bytes_sent(),
        }
    }

    /// Return how many request body bytes (application, not wire) already read from downstream
    pub fn body_bytes_read(&self) -> usize {
        match self {
            Self::H1(s) => s.body_bytes_read(),
            Self::H2(s) => s.body_bytes_read(),
            Self::Subrequest(s) => s.body_bytes_read(),
            Self::Custom(s) => s.body_bytes_read(),
        }
    }

    /// Return the [Digest] for the connection.
    pub fn digest(&self) -> Option<&Digest> {
        match self {
            Self::H1(s) => Some(s.digest()),
            Self::H2(s) => s.digest(),
            Self::Subrequest(s) => s.digest(),
            Self::Custom(s) => s.digest(),
        }
    }

    /// Return a mutable [Digest] reference for the connection.
    ///
    /// Will return `None` if multiple H2 streams are open.
    pub fn digest_mut(&mut self) -> Option<&mut Digest> {
        match self {
            Self::H1(s) => Some(s.digest_mut()),
            Self::H2(s) => s.digest_mut(),
            Self::Subrequest(s) => s.digest_mut(),
            Self::Custom(s) => s.digest_mut(),
        }
    }

    /// Return the client (peer) address of the connection.
    pub fn client_addr(&self) -> Option<&SocketAddr> {
        match self {
            Self::H1(s) => s.client_addr(),
            Self::H2(s) => s.client_addr(),
            Self::Subrequest(s) => s.client_addr(),
            Self::Custom(s) => s.client_addr(),
        }
    }

    /// Return the server (local) address of the connection.
    pub fn server_addr(&self) -> Option<&SocketAddr> {
        match self {
            Self::H1(s) => s.server_addr(),
            Self::H2(s) => s.server_addr(),
            Self::Subrequest(s) => s.server_addr(),
            Self::Custom(s) => s.server_addr(),
        }
    }

    /// Get the reference of the [Stream] that this HTTP/1 session is operating upon.
    /// None if the HTTP session is over H2, or a subrequest
    pub fn stream(&self) -> Option<&Stream> {
        match self {
            Self::H1(s) => Some(s.stream()),
            Self::H2(_) => None,
            Self::Subrequest(_) => None,
            Self::Custom(_) => None,
        }
    }

    /// Check if this session supports the cancel-safe proxy task API.
    ///
    /// Currently supported by HTTP/1.x, Subrequest, and opted-in Custom
    /// server sessions; toggled per-session via
    /// [`set_proxy_tasks_enabled`](Self::set_proxy_tasks_enabled).
    pub fn supports_proxy_task_api(&self) -> bool {
        match self {
            Self::H1(s) => s.proxy_tasks_enabled(),
            Self::Subrequest(s) => s.proxy_tasks_enabled(),
            Self::Custom(s) => s.proxy_tasks_enabled(),
            Self::H2(_) => false,
        }
    }

    /// Enable or disable the cancel-safe proxy task API for this session.
    pub fn set_proxy_tasks_enabled(&mut self, enabled: bool) {
        match self {
            Self::H1(s) => s.set_proxy_tasks_enabled(enabled),
            Self::Subrequest(s) => s.set_proxy_tasks_enabled(enabled),
            Self::Custom(s) => s.set_proxy_tasks_enabled(enabled),
            Self::H2(_) => {}
        }
    }

    /// Whether HTTP/1.1 request pipelining is enabled for this session.
    ///
    /// Always false for H2 / Subrequest / Custom (pipelining is an H/1.1-only
    /// concept). For H1, see
    /// [`HttpSession::set_pipelining_enabled`](crate::protocols::http::v1::server::HttpSession::set_pipelining_enabled).
    pub fn pipelining_enabled(&self) -> bool {
        match self {
            Self::H1(s) => s.pipelining_enabled(),
            _ => false,
        }
    }

    /// Enable or disable HTTP/1.1 request pipelining on this session.
    ///
    /// No-op for H2 / Subrequest / Custom. See
    /// [`HttpSession::set_pipelining_enabled`](crate::protocols::http::v1::server::HttpSession::set_pipelining_enabled)
    /// for semantics.
    pub fn set_pipelining_enabled(&mut self, enabled: bool) {
        if let Self::H1(s) = self {
            s.set_pipelining_enabled(enabled);
        }
    }

    /// Set pipelined bytes to be parsed as the start of this session's request.
    ///
    /// No-op for non-H1 sessions. See
    /// [`HttpSession::set_pipelined_prefix`](crate::protocols::http::v1::server::HttpSession::set_pipelined_prefix)
    /// for the lifecycle.
    pub fn set_pipelined_prefix(&mut self, prefix: BytesMut) {
        if let Self::H1(s) = self {
            s.set_pipelined_prefix(prefix);
        }
    }

    /// Queue a downstream proxy task for cancel-safe writing.
    ///
    /// # Panics
    /// Panics if called on a session that doesn't support the proxy task API.
    /// Check [`supports_proxy_task_api`](Self::supports_proxy_task_api) first,
    /// or use `write_response_header()` / `write_response_body()` for other
    /// session types.
    #[track_caller]
    pub fn send_downstream_proxy_task(&mut self, task: HttpTask) {
        match self {
            Self::H1(s) => s.send_proxy_task(task),
            Self::H2(_) => panic!("H2 proxy task API not yet implemented"),
            Self::Subrequest(s) => s.send_proxy_task(task),
            Self::Custom(s) => s.send_proxy_task(task),
        }
    }

    /// Check if there are pending downstream proxy tasks queued for writing.
    ///
    /// Returns false for sessions that don't support the proxy task API.
    pub fn has_pending_downstream_proxy_tasks(&self) -> bool {
        match self {
            Self::H1(s) => s.has_pending_proxy_tasks(),
            Self::H2(_) => false, // TODO: implement for H2
            Self::Subrequest(s) => s.has_pending_proxy_tasks(),
            Self::Custom(s) => s.has_pending_proxy_tasks(),
        }
    }

    /// Write all queued downstream proxy tasks in a cancel-safe manner.
    /// Returns `Ok(true)` if this was the end of the response stream.
    ///
    /// # Panics
    /// Panics if called on a session that doesn't support the proxy task API.
    /// Check [`supports_proxy_task_api`](Self::supports_proxy_task_api) first,
    /// or use `write_response_header()` / `write_response_body()` for other
    /// session types.
    pub async fn write_downstream_proxy_tasks(&mut self) -> Result<bool> {
        match self {
            Self::H1(s) => s.write_proxy_tasks().await,
            Self::H2(_) => panic!("H2 proxy task API not yet implemented"),
            Self::Subrequest(s) => s.write_proxy_tasks().await,
            Self::Custom(s) => s.write_proxy_tasks().await,
        }
    }
}

#[cfg(test)]
mod tests {
    use super::*;
    use crate::protocols::http::custom::CustomMessageWrite;
    use async_trait::async_trait;
    use futures::Stream;
    use std::panic::{catch_unwind, AssertUnwindSafe};
    use std::sync::{Arc, Mutex};

    #[tokio::test]
    async fn custom_proxy_task_defaults_are_opted_out_and_fail_loudly() {
        let mut session = Session::new_custom(Box::new(()));

        assert!(!session.supports_proxy_task_api());
        session.set_proxy_tasks_enabled(true);
        assert!(!session.supports_proxy_task_api());
        assert!(!session.has_pending_downstream_proxy_tasks());

        assert!(catch_unwind(AssertUnwindSafe(|| {
            session.send_downstream_proxy_task(HttpTask::Done);
        }))
        .is_err());

        let join = tokio::spawn(async move { session.write_downstream_proxy_tasks().await });
        assert!(join.await.unwrap_err().is_panic());
    }

    #[tokio::test]
    async fn custom_proxy_task_methods_delegate_to_the_custom_session() {
        let mut session = Session::new_custom(Box::new(ProxyTaskCustom::new()));

        assert!(!session.supports_proxy_task_api());
        session.set_proxy_tasks_enabled(true);
        assert!(session.supports_proxy_task_api());

        session.send_downstream_proxy_task(HttpTask::Done);
        assert!(session.has_pending_downstream_proxy_tasks());
        assert!(session.write_downstream_proxy_tasks().await.unwrap());
        assert!(!session.has_pending_downstream_proxy_tasks());
    }

    /// `Session::shutdown` abandons a response mid-message, so it must take the
    /// entry point that lets a custom protocol convey exactly that. Routing it to
    /// the bare `shutdown` instead leaves the protocol with no way to distinguish
    /// an abandoned response from a completed one, which a peer can then read as
    /// success.
    #[tokio::test]
    async fn custom_session_shutdown_signals_an_incomplete_message() {
        let shutdown_calls = Arc::new(Mutex::new(Vec::new()));
        let mut session = Session::new_custom(Box::new(ProxyTaskCustom::with_shutdown_calls(
            shutdown_calls.clone(),
        )));

        session.shutdown().await;

        assert_eq!(*shutdown_calls.lock().unwrap(), ["abandon(shutdown)"]);
    }

    struct ProxyTaskCustom {
        header: RequestHeader,
        enabled: bool,
        tasks: Vec<HttpTask>,
        shutdown_calls: Arc<Mutex<Vec<String>>>,
    }

    impl ProxyTaskCustom {
        fn new() -> Self {
            Self {
                header: RequestHeader::build("GET", b"/", None).unwrap(),
                enabled: false,
                tasks: Vec::new(),
                shutdown_calls: Arc::new(Mutex::new(Vec::new())),
            }
        }

        fn with_shutdown_calls(shutdown_calls: Arc<Mutex<Vec<String>>>) -> Self {
            Self {
                shutdown_calls,
                ..Self::new()
            }
        }
    }

    #[async_trait]
    impl SessionCustom for ProxyTaskCustom {
        fn req_header(&self) -> &RequestHeader {
            &self.header
        }

        fn req_header_mut(&mut self) -> &mut RequestHeader {
            &mut self.header
        }

        async fn read_body_bytes(&mut self) -> Result<Option<Bytes>> {
            unreachable!("not used by proxy task dispatch test")
        }

        async fn drain_request_body(&mut self) -> Result<()> {
            unreachable!("not used by proxy task dispatch test")
        }

        async fn write_response_header(
            &mut self,
            _resp: Box<ResponseHeader>,
            _end: bool,
        ) -> Result<()> {
            unreachable!("not used by proxy task dispatch test")
        }

        async fn write_response_header_ref(
            &mut self,
            _resp: &ResponseHeader,
            _end: bool,
        ) -> Result<()> {
            unreachable!("not used by proxy task dispatch test")
        }

        async fn write_body(&mut self, _data: Bytes, _end: bool) -> Result<()> {
            unreachable!("not used by proxy task dispatch test")
        }

        async fn write_trailers(&mut self, _trailers: HeaderMap) -> Result<()> {
            unreachable!("not used by proxy task dispatch test")
        }

        async fn response_duplex_vec(&mut self, _tasks: Vec<HttpTask>) -> Result<bool> {
            unreachable!("not used by proxy task dispatch test")
        }

        fn proxy_tasks_enabled(&self) -> bool {
            self.enabled
        }

        fn set_proxy_tasks_enabled(&mut self, enabled: bool) {
            self.enabled = enabled;
        }

        fn send_proxy_task(&mut self, task: HttpTask) {
            self.tasks.push(task);
        }

        fn has_pending_proxy_tasks(&self) -> bool {
            !self.tasks.is_empty()
        }

        async fn write_proxy_tasks(&mut self) -> Result<bool> {
            self.tasks.clear();
            Ok(true)
        }

        fn set_read_timeout(&mut self, _timeout: Option<Duration>) {
            unreachable!("not used by proxy task dispatch test")
        }

        fn get_read_timeout(&self) -> Option<Duration> {
            unreachable!("not used by proxy task dispatch test")
        }

        fn set_write_timeout(&mut self, _timeout: Option<Duration>) {
            unreachable!("not used by proxy task dispatch test")
        }

        fn get_write_timeout(&self) -> Option<Duration> {
            unreachable!("not used by proxy task dispatch test")
        }

        fn set_total_drain_timeout(&mut self, _timeout: Option<Duration>) {
            unreachable!("not used by proxy task dispatch test")
        }

        fn get_total_drain_timeout(&self) -> Option<Duration> {
            unreachable!("not used by proxy task dispatch test")
        }

        fn request_summary(&self) -> String {
            unreachable!("not used by proxy task dispatch test")
        }

        fn response_written(&self) -> Option<&ResponseHeader> {
            unreachable!("not used by proxy task dispatch test")
        }

        async fn shutdown(&mut self, code: u32, ctx: &str) {
            self.shutdown_calls
                .lock()
                .unwrap()
                .push(format!("shutdown({code}, {ctx})"));
        }

        async fn abandon(&mut self, ctx: &str) {
            self.shutdown_calls
                .lock()
                .unwrap()
                .push(format!("abandon({ctx})"));
        }

        fn is_body_done(&mut self) -> bool {
            unreachable!("not used by proxy task dispatch test")
        }

        async fn finish(&mut self) -> Result<()> {
            unreachable!("not used by proxy task dispatch test")
        }

        fn is_body_empty(&mut self) -> bool {
            unreachable!("not used by proxy task dispatch test")
        }

        async fn read_body_or_idle(&mut self, _no_body_expected: bool) -> Result<Option<Bytes>> {
            unreachable!("not used by proxy task dispatch test")
        }

        fn body_bytes_sent(&self) -> usize {
            unreachable!("not used by proxy task dispatch test")
        }

        fn body_bytes_read(&self) -> usize {
            unreachable!("not used by proxy task dispatch test")
        }

        fn digest(&self) -> Option<&Digest> {
            unreachable!("not used by proxy task dispatch test")
        }

        fn digest_mut(&mut self) -> Option<&mut Digest> {
            unreachable!("not used by proxy task dispatch test")
        }

        fn client_addr(&self) -> Option<&SocketAddr> {
            unreachable!("not used by proxy task dispatch test")
        }

        fn server_addr(&self) -> Option<&SocketAddr> {
            unreachable!("not used by proxy task dispatch test")
        }

        fn pseudo_raw_h1_request_header(&self) -> Bytes {
            unreachable!("not used by proxy task dispatch test")
        }

        fn enable_retry_buffering(&mut self) {
            unreachable!("not used by proxy task dispatch test")
        }

        fn retry_buffer_truncated(&self) -> bool {
            unreachable!("not used by proxy task dispatch test")
        }

        fn get_retry_buffer(&self) -> Option<Bytes> {
            unreachable!("not used by proxy task dispatch test")
        }

        async fn finish_custom(&mut self) -> Result<()> {
            unreachable!("not used by proxy task dispatch test")
        }

        fn take_custom_message_reader(
            &mut self,
        ) -> Option<Box<dyn Stream<Item = Result<Bytes>> + Unpin + Send + Sync + 'static>> {
            unreachable!("not used by proxy task dispatch test")
        }

        fn restore_custom_message_reader(
            &mut self,
            _reader: Box<dyn Stream<Item = Result<Bytes>> + Unpin + Send + Sync + 'static>,
        ) -> Result<()> {
            unreachable!("not used by proxy task dispatch test")
        }

        fn take_custom_message_writer(&mut self) -> Option<Box<dyn CustomMessageWrite>> {
            unreachable!("not used by proxy task dispatch test")
        }

        fn restore_custom_message_writer(
            &mut self,
            _writer: Box<dyn CustomMessageWrite>,
        ) -> Result<()> {
            unreachable!("not used by proxy task dispatch test")
        }
    }
}