pgwire-replication 0.1.2

# pgwire-replication

[![CI](https://github.com/vnvo/pgwire-replication/actions/workflows/ci.yml/badge.svg)](https://github.com/vnvo/pgwire-replication/actions/workflows/ci.yml)
[![Crates.io](https://img.shields.io/crates/v/pgwire-replication.svg)](https://crates.io/crates/pgwire-replication)
[![docs.rs](https://docs.rs/pgwire-replication/badge.svg)](https://docs.rs/pgwire-replication)
[![License](https://img.shields.io/badge/license-MIT%2FApache--2.0-blue.svg)](https://github.com/vnvo/pgwire-replication#license)
[![MSRV](https://img.shields.io/badge/MSRV-1.88-blue.svg)](Cargo.toml)

A low-level, high-performance PostgreSQL logical replication client implemented directly on top of the PostgreSQL wire protocol (pgwire).

This crate is designed for **CDC, change streaming, and WAL replay systems** that require explicit control over replication state, deterministic restart behavior, and minimal runtime overhead.

`pgwire-replication` intentionally avoids `libpq`, `tokio-postgres`, and other higher-level PostgreSQL clients for the replication path. It interacts with a Postgres instance directly and relies on `START_REPLICATION ... LOGICAL ...` and the built-in `pgoutput` output plugin.

`pgwire-replication` exists to provide:

- a **direct pgwire implementation** for logical replication
- explicit, user-controlled LSN start and stop semantics
- predictable feedback and backpressure behavior
- clean integration into async systems and coordinators

This crate was originally extracted from the Deltaforge CDC project and is maintained independently.

## Installation

Add to your `Cargo.toml`:

```toml
[dependencies]
pgwire-replication = "0.1"
```

Or with specific features:

```toml
[dependencies]
pgwire-replication = { version = "0.1", default-features = false, features = ["tls-rustls"] }
```

## Requirements

- Rust 1.88 or later
- PostgreSQL 15+ with logical replication enabled (older versions will probably work too)

## Features

- Logical replication using the PostgreSQL wire protocol
- `pgoutput` logical decoding support (transport-level)
- Explicit LSN seek (`start_lsn`)
- Bounded replay (`stop_at_lsn`)
- Periodic standby status updates
- Keepalive handling
- Tokio-based async client
- SCRAM-SHA-256 and MD5 authentication
- TLS/mTLS support (via rustls)
- Designed for checkpoint and replay-based systems

## Non-goals

This crate intentionally does **not** provide:

- A general-purpose SQL client
- Automatic checkpoint persistence
- Exactly-once semantics
- Schema management or DDL interpretation
- Full `pgoutput` decoding into rows or events

These responsibilities belong in higher layers.

## Basic usage

```rust
use pgwire_replication::{ReplicationClient, ReplicationEvent};

let mut repl = ReplicationClient::connect(config).await?;

while let Some(event) = repl.recv().await? {
    match event {
        ReplicationEvent::XLogData { wal_end, data, .. } => {
            process(data);
            repl.update_applied_lsn(wal_end);
        }
        ReplicationEvent::KeepAlive { .. } => {}
        ReplicationEvent::StoppedAt { reached } => break,
    }
}
// Clean end-of-stream
```

Check the **Quick Start** and **Examples** for more detailed use cases.

## Seek and Replay Semantics

`pgwire-replication` is built around explicit WAL position control.
LSNs (Log Sequence Numbers) are treated as first-class inputs and outputs and are never hidden behind opaque offsets.

### Starting from an LSN (Seek)

Every replication session begins at an explicit LSN:

```rust
ReplicationConfig {
    start_lsn: Lsn,
    ..
}
```

This enables:

- resuming replication after a crash
- replaying WAL from a known checkpoint
- controlled historical backfills

The provided LSN is sent verbatim to PostgreSQL via `START_REPLICATION`.

### Bounded Replay (Start -> Stop)

Replication can be bounded using `stop_at_lsn`:

```rust
ReplicationConfig {
    start_lsn,
    stop_at_lsn: Some(stop_lsn),
    ..
}
```

When configured:

- replication starts at start_lsn
- WAL is streamed until the stop LSN is reached
- a ReplicationEvent::StoppedAt { reached } event is emitted
- After StoppedAt is emitted, the stream ends cleanly and recv() returns Ok(None)
- the replication connection is terminated cleanly using CopyDone

This enables:

- deterministic WAL replay
- offline backfills
- "replay up to checkpoint" workflows
- controlled reprocessing in recovery scenarios

## Progress Tracking and Feedback

Progress is **not** auto-committed.
Instead, the consumer explicitly reports progress:

```rust
repl.update_applied_lsn(lsn);
```
Calling `update_applied_lsn` indicates that **all WAL up to `lsn` has been durably persisted by the consumer** (for example, flushed to disk or a message queue).

This allows callers to control:

- durability boundaries
- batching behavior
- exactly-once or at-least-once semantics (implemented externally)

Updates are **monotonic**: reporting an older LSN is a no-op.
Standby status updates are sent asynchronously by the worker using the
latest applied LSN, based on `status_interval` or server keepalive requests.
For CDC pipelines, progress should typically be reported at **transaction commit boundaries**, not for every message.

## Idle behavior

PostgreSQL logical replication may remain silent for extended periods when no WAL is generated.
This is normal.

`idle_wakeup_interval` does not indicate failure. It bounds how long the client may block
waiting for server messages before waking up to send a standby status update and continue waiting.
While the system is idle, the effective feedback cadence is bounded by
`idle_wakeup_interval`, not `status_interval`.

## Shutdown

- `stop()` requests a graceful stop (sends `CopyDone`). The client will continue to yield any buffered events and then `recv()` returns `Ok(None)`.
- `shutdown().await` is a convenience method that calls `stop()`, drains remaining events, and awaits the worker task result.
- `abort()` cancels the worker task immediately (hard stop; does not send `CopyDone`).

Dropping `ReplicationClient` requests a best-effort graceful stop. When dropped inside a Tokio runtime, the worker is detached and allowed to finish cleanly; when dropped outside a runtime, the worker may be aborted to avoid leaking a task.

## Important Notes on LSN Semantics

PostgreSQL logical replication delivers complete, committed transactions in commit order. This has important implications for LSN handling:

- **Commit LSNs are strictly monotonically increasing** across the replication stream.
- **Within a single transaction**, event LSNs are monotonically increasing.
- **Across transactions**, event LSNs are *not* monotonic. Concurrent transactions interleave their writes in WAL, so a later transaction in the stream may contain events with lower LSNs than the previous transaction.
- **The tuple `(commit_lsn, event_lsn)` provides a total ordering** suitable for checkpointing and replay.
- **LSNs are not dense**: LSNs are byte offsets into the WAL, not sequential counters. Gaps between consecutive events are normal.

For CDC pipelines, progress tracking should typically be based on commit boundaries rather than individual event LSNs.

LSNs are formatted exactly as PostgreSQL displays them:

- uppercase hexadecimal
- `X/Y` format
- up to 8 hex digits per part
- leading zeros omitted

Examples: `0/0`, `0/16B6C50`, `16/B374D848`

Parsing accepts both padded and unpadded forms for compatibility.

## TLS support

TLS is optional and uses `rustls`.
TLS configuration is provided explicitly via `ReplicationConfig` and does not rely on system OpenSSL.

## Quick start

Control plane (publication/slot creation) is typically done using a proper "Postgres client" (Your choice).
This crate handles only the replication plane.

```rust
use pgwire_replication::{
    client::ReplicationEvent, Lsn, ReplicationClient, ReplicationConfig, SslMode, TlsConfig,
};

#[tokio::main]
async fn main() -> anyhow::Result<()> {
    // Control plane (publication/slot creation) is typically done using a Postgres client.
    // This crate implements the replication plane only.

    // Use a real LSN:
    // - from your checkpoint store, or
    // - from SQL (pg_current_wal_lsn / slot confirmed_flush_lsn), or
    // - from a previous run.
    let start_lsn = Lsn::parse("0/16B6C50")?;

    let cfg = ReplicationConfig {
        host: "127.0.0.1".into(),
        port: 5432,
        user: "postgres".into(),
        password: "postgres".into(),
        database: "postgres".into(),
        tls: TlsConfig::disabled(),
        slot: "my_slot".into(),
        publication: "my_pub".into(),
        start_lsn,
        stop_at_lsn: None,

        status_interval: std::time::Duration::from_secs(10),
        idle_wakeup_interval: std::time::Duration::from_secs(10),
        buffer_events: 8192,
    };

    let mut client = ReplicationClient::connect(cfg).await?;

    loop {
        match client.recv().await {
            Ok(Some(ev)) => match ev {
                ReplicationEvent::XLogData { wal_end, data, .. } => {
                    println!("XLogData wal_end={wal_end} bytes={}", data.len());
                    client.update_applied_lsn(wal_end);
                }
                ReplicationEvent::KeepAlive {
                    wal_end,
                    reply_requested,
                    ..
                } => {
                    println!("KeepAlive wal_end={wal_end} reply_requested={reply_requested}");
                }
                ReplicationEvent::StoppedAt { reached } => {
                    println!("StoppedAt reached={reached}");
                    // break is optional; the stream should end shortly anyway
                    break;
                }
            },
            Ok(None) => {
                println!("Replication ended cleanly");
                break;
            }
            Err(e) => {
                eprintln!("Replication failed: {e}");
                return Err(e.into());
            }
        }
    }
    Ok(())
}
```

## Examples

Examples that use the control-plane SQL client (`tokio-postgres`) require the `examples` feature.

### Replication plane only: `examples/basic.rs`

```bash
START_LSN="0/16B6C50" cargo run --example basic
```

### Control-plane + streaming: `examples/checkpointed.rs`

```bash
cargo run --example checkpointed
```

### Bounded replay: `examples/bounded_replay.rs`

```bash
cargo run --example bounded_replay
```

### With TLS enabled: `examples/with_tls.rs`

```bash
PGHOST=db.example.com \
PGPORT=5432 \
PGUSER=repl_user \
PGPASSWORD=secret \
PGDATABASE=postgres \
PGSLOT=example_slot_tls \
PGPUBLICATION=example_pub_tls \
PGTLS_CA=/path/to/ca.pem \
PGTLS_SNI=db.example.com \
cargo run --example with_tls
```

### Enabling mTLS : `examples/with_mtls.rs`

Inject the fake dns record, if you need to:

```bash
sudo sh -c 'echo "127.0.0.1 db.example.com" >> /etc/hosts'
```

and then:

```bash
PGHOST=db.example.com \
PGPORT=5432 \
PGUSER=repl_user \
PGPASSWORD=secret \
PGDATABASE=postgres \
PGSLOT=example_slot_mtls \
PGPUBLICATION=example_pub_mtls \
PGTLS_CA=/etc/ssl/ca.pem \
PGTLS_CLIENT_CERT=/etc/ssl/client.crt.pem \
PGTLS_CLIENT_KEY=/etc/ssl/client.key.pem \
PGTLS_SNI=db.example.com \
cargo run --example with_mtls
```

- `PGUSER/PGPASSWORD` are used for control-plane setup (publication/slot).
- `REPL_USER/REPL_PASSWORD` are used for the replication stream.
- If PGHOST is an **IP address**, you must set `PGTLS_SNI` to a DNS name on the cert.
- Client key should be **PKCS#8 PEM** for best compatibility.
- `VerifyCa` can be used instead of `VerifyFull` if hostname validation is not possible.

# Testing

Integration tests use Docker via `testcontainers` and are gated behind a feature flag:

```bash
cargo test --features integration-tests -- --nocapture
```

# License

Licensed under either of:

- Apache License, Version 2.0
- MIT License

at your option.