Rust PCF857x I/O Expanders Driver

This is a platform agnostic Rust driver for the PCF8574, PCF8574A and PCF8575 I/O expanders, based on the embedded-hal traits.

This driver allows you to:

• Set all the outputs to 0 or 1 at once.
• Read selected inputs.
• Set all the outputs repeatedly looping through an array.
• Read selected inputs repeatedly filling up an array.

The devices

The devices consist of 8 or 16 quasi-bidirectional ports, I²C-bus interface, three hardware address inputs and interrupt output. The quasi-bidirectional port can be independently assigned as an input to monitor interrupt status or keypads, or as an output to activate indicator devices such as LEDs.

The active LOW open-drain interrupt output (INT) can be connected to the interrupt logic of the microcontroller and is activated when any input state differs from its corresponding input port register state.

Datasheets:

• PCF8574 / PCF8574A
• PCF8575

License

Licensed under either of

• Apache License, Version 2.0 (LICENSE-APACHE or http://www.apache.org/licenses/LICENSE-2.0)
• MIT license (LICENSE-MIT or http://opensource.org/licenses/MIT) at your option.

Contributing

Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.