parse_that 0.2.1

use std::ops::RangeBounds;

use crate::leaf::trim_leading_whitespace_mut;
use crate::parse::Parser;
use crate::state::ParserState;
use crate::utils::extract_bounds;
use smallvec::SmallVec;

impl<'a, Output> Parser<'a, Output>
where
    Self: 'a,
    Output: 'a,
{
    #[inline]
    pub fn then<Output2>(self, next: Parser<'a, Output2>) -> Parser<'a, (Output, Output2)>
    where
        Output2: 'a,
    {
        let with = move |state: &mut ParserState<'a>| {
            let value1 = self.call(state)?;
            let value2 = next.call(state)?;
            Some((value1, value2))
        };
        Parser::new(with)
    }

    /// Alternation with checkpoint-based backtracking (no Vec push/pop).
    #[inline]
    pub fn or(self, other: Parser<'a, Output>) -> Parser<'a, Output> {
        let or = move |state: &mut ParserState<'a>| {
            let checkpoint = state.offset;
            if let Some(value) = self.call(state) {
                return Some(value);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = checkpoint;

            if let Some(value) = other.call(state) {
                return Some(value);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = checkpoint;

            None
        };
        Parser::new(or)
    }

    #[inline]
    pub fn opt(self) -> Parser<'a, Option<Output>> {
        let opt = move |state: &mut ParserState<'a>| {
            if let Some(value) = self.call(state) {
                return Some(Some(value));
            }
            Some(None)
        };
        Parser::new(opt)
    }

    /// Consuming negative lookahead: parse `self`, then check that `next` does
    /// NOT match at the resulting position. If `next` matches, the overall
    /// parse fails. Unlike `negate()` (zero-width), `not()` consumes the input
    /// matched by `self` on success.
    #[inline]
    pub fn not<Output2>(self, next: Parser<'a, Output2>) -> Parser<'a, Output>
    where
        Output2: 'a,
    {
        let not = move |state: &mut ParserState<'a>| {
            let value = self.call(state)?;
            let checkpoint = state.offset;
            let saved_furthest = state.furthest_offset;
            if next.call(state).is_none() {
                state.offset = checkpoint;
                state.furthest_offset = saved_furthest;
                return Some(value);
            }
            state.offset = checkpoint;
            state.furthest_offset = saved_furthest;
            None
        };
        Parser::new(not)
    }

    /// Set difference: match `self` only if `excluded` would NOT match at the
    /// same starting position. Used for EBNF/BNF exception (`-`) semantics.
    #[inline]
    pub fn minus<Output2>(self, excluded: Parser<'a, Output2>) -> Parser<'a, Output>
    where
        Output2: 'a,
    {
        let minus = move |state: &mut ParserState<'a>| {
            let checkpoint = state.offset;
            let saved_furthest = state.furthest_offset;
            if excluded.call(state).is_some() {
                state.offset = checkpoint;
                state.furthest_offset = saved_furthest;
                return None;
            }
            state.offset = checkpoint;
            state.furthest_offset = saved_furthest;
            self.call(state)
        };
        Parser::new(minus)
    }

    /// Zero-width negative assertion: succeeds (returning `()`) when the inner
    /// parser *fails*, and fails when the inner parser *succeeds*. Does not
    /// consume any input in either case.
    #[inline]
    pub fn negate(self) -> Parser<'a, ()> {
        let negate = move |state: &mut ParserState<'a>| {
            let checkpoint = state.offset;
            let saved_furthest = state.furthest_offset;
            if self.call(state).is_none() {
                state.offset = checkpoint;
                state.furthest_offset = saved_furthest;
                return Some(());
            }
            state.offset = checkpoint;
            state.furthest_offset = saved_furthest;
            None
        };
        Parser::new(negate)
    }

    #[inline]
    pub fn map<Output2>(self, f: fn(Output) -> Output2) -> Parser<'a, Output2>
    where
        Output2: 'a,
    {
        let map = move |state: &mut ParserState<'a>| self.call(state).map(f);
        Parser::new(map)
    }

    #[inline]
    pub fn map_with_state<Output2>(
        self,
        f: fn(Output, usize, &mut ParserState<'a>) -> Output2,
    ) -> Parser<'a, Output2>
    where
        Output2: 'a,
    {
        let map_with_state = move |state: &mut ParserState<'a>| {
            let offset = state.offset;
            let result = self.call(state)?;
            Some(f(result, offset, state))
        };
        Parser::new(map_with_state)
    }

    #[inline]
    pub fn skip<Output2>(self, next: Parser<'a, Output2>) -> Parser<'a, Output>
    where
        Output2: 'a,
    {
        let skip = move |state: &mut ParserState<'a>| {
            let value = self.call(state)?;
            next.call(state)?;
            Some(value)
        };
        Parser::new(skip)
    }

    #[inline]
    pub fn next<Output2>(self, next: Parser<'a, Output2>) -> Parser<'a, Output2>
    where
        Output2: 'a,
    {
        let next = move |state: &mut ParserState<'a>| {
            self.call(state)?;
            next.call(state)
        };
        Parser::new(next)
    }

    #[inline]
    pub fn many(self, bounds: impl RangeBounds<usize> + 'a) -> Parser<'a, Vec<Output>> {
        let (lower_bound, upper_bound) = extract_bounds(bounds);

        let many = move |state: &mut ParserState<'a>| {
            let est = if lower_bound > 0 {
                lower_bound.max(4)
            } else {
                4
            };
            let mut values = Vec::with_capacity(est);

            while values.len() < upper_bound {
                if let Some(value) = self.call(state) {
                    values.push(value);
                } else {
                    break;
                }
            }
            if values.len() >= lower_bound {
                Some(values)
            } else {
                None
            }
        };

        Parser::new(many)
    }

    /// Like `many()` but returns `SmallVec<A>` — inline storage avoids heap
    /// allocation for small collections.
    #[inline]
    pub fn many_small<A>(
        self,
        bounds: impl RangeBounds<usize> + 'a,
    ) -> Parser<'a, SmallVec<A>>
    where
        A: smallvec::Array<Item = Output> + 'a,
    {
        let (lower_bound, upper_bound) = extract_bounds(bounds);

        let many = move |state: &mut ParserState<'a>| {
            let mut values = SmallVec::new();

            while values.len() < upper_bound {
                if let Some(value) = self.call(state) {
                    values.push(value);
                } else {
                    break;
                }
            }
            if values.len() >= lower_bound {
                Some(values)
            } else {
                None
            }
        };

        Parser::new(many)
    }

    /// Like `sep_by()` but returns `SmallVec<A>` — inline storage avoids heap
    /// allocation for small collections.
    #[inline]
    pub fn sep_by_small<Output2, A>(
        self,
        sep: Parser<'a, Output2>,
        bounds: impl RangeBounds<usize> + 'a,
    ) -> Parser<'a, SmallVec<A>>
    where
        Output2: 'a,
        A: smallvec::Array<Item = Output> + 'a,
    {
        let (lower_bound, upper_bound) = extract_bounds(bounds);

        let sep_by = move |state: &mut ParserState<'a>| {
            let mut values = SmallVec::new();

            // Parse first element
            if let Some(value) = self.call(state) {
                values.push(value);
            } else if lower_bound == 0 {
                return Some(values);
            } else {
                return None;
            }

            while values.len() < upper_bound {
                let cp = state.offset;
                if sep.call(state).is_none() {
                    state.offset = cp;
                    break;
                }
                if let Some(value) = self.call(state) {
                    values.push(value);
                } else {
                    state.offset = cp;
                    break;
                }
            }

            if values.len() >= lower_bound {
                Some(values)
            } else {
                None
            }
        };

        Parser::new(sep_by)
    }

    #[inline]
    pub fn wrap<Output2, Output3>(
        self,
        left: Parser<'a, Output2>,
        right: Parser<'a, Output3>,
    ) -> Parser<'a, Output>
    where
        Output2: 'a,
        Output3: 'a,
    {
        let wrap = move |state: &mut ParserState<'a>| {
            #[cfg(feature = "diagnostics")]
            let open_offset = state.offset;
            left.call(state)?;
            #[cfg(feature = "diagnostics")]
            let open_end = state.offset;
            let value = self.call(state)?;
            if right.call(state).is_some() {
                Some(value)
            } else {
                #[cfg(feature = "diagnostics")]
                {
                    let delimiter = state.src[open_offset..open_end].to_string();
                    state.add_suggestion(|| crate::state::Suggestion {
                        kind: crate::state::SuggestionKind::UnclosedDelimiter {
                            delimiter: delimiter.clone(),
                            open_offset,
                        },
                        message: format!(
                            "close the delimiter with matching `{}`",
                            match delimiter.as_str() {
                                "{" => "}",
                                "[" => "]",
                                "(" => ")",
                                d => d,
                            }
                        ),
                    });
                    state.add_secondary_span(
                        open_offset,
                        format!("unclosed `{}` opened here", delimiter),
                    );
                }
                None
            }
        };
        Parser::new(wrap)
    }

    #[inline]
    pub fn trim<Output2>(self, trimmer: Parser<'a, Output2>) -> Parser<'a, Output>
    where
        Output2: 'a,
    {
        let trim = move |state: &mut ParserState<'a>| {
            trimmer.call(state)?;
            let value = self.call(state)?;
            trimmer.call(state)?;
            Some(value)
        };
        Parser::new(trim)
    }

    #[inline]
    pub fn trim_keep<Output2>(
        self,
        trimmer: Parser<'a, Output2>,
    ) -> Parser<'a, (Output2, Output, Output2)>
    where
        Output2: 'a,
    {
        let trim = move |state: &mut ParserState<'a>| {
            let trim1 = trimmer.call(state)?;
            let value = self.call(state)?;
            let trim2 = trimmer.call(state)?;
            Some((trim1, value, trim2))
        };
        Parser::new(trim)
    }

    /// Strictly interleaving: `elem (sep elem)*`. Never accepts a trailing
    /// separator — trailing sep acceptance is a grammar concern.
    #[inline]
    pub fn sep_by<Output2>(
        self,
        sep: Parser<'a, Output2>,
        bounds: impl RangeBounds<usize> + 'a,
    ) -> Parser<'a, Vec<Output>>
    where
        Output2: 'a,
    {
        let (lower_bound, upper_bound) = extract_bounds(bounds);

        let sep_by = move |state: &mut ParserState<'a>| {
            let est = if lower_bound > 0 {
                lower_bound.max(4)
            } else {
                4
            };
            let mut values = Vec::with_capacity(est);

            // Parse first element
            if let Some(value) = self.call(state) {
                values.push(value);
            } else if lower_bound == 0 {
                return Some(values);
            } else {
                return None;
            }

            // Parse (sep elem)* — checkpoint before separator so trailing
            // separators are rejected by restoring state.
            while values.len() < upper_bound {
                let cp = state.offset;
                if sep.call(state).is_none() {
                    state.offset = cp;
                    break;
                }
                if let Some(value) = self.call(state) {
                    values.push(value);
                } else {
                    // Element after separator failed — backtrack past the
                    // separator to reject the trailing separator.
                    state.offset = cp;
                    break;
                }
            }

            if values.len() >= lower_bound {
                Some(values)
            } else {
                None
            }
        };

        Parser::new(sep_by)
    }

    /// Fused sep_by + whitespace trimming. Instead of wrapping element and
    /// separator in trim_whitespace (which double-trims between elements),
    /// this does a single trim between each step:
    ///   trim_ws → parse_element → (trim_ws → parse_sep → trim_ws → parse_element)*
    #[inline]
    pub fn sep_by_ws<Output2>(
        self,
        sep: Parser<'a, Output2>,
        bounds: impl RangeBounds<usize> + 'a,
    ) -> Parser<'a, Vec<Output>>
    where
        Output2: 'a,
    {
        let (lower_bound, upper_bound) = extract_bounds(bounds);

        let sep_by_ws = move |state: &mut ParserState<'a>| {
            let mut values = Vec::with_capacity(4);

            // Pre-trim before first element
            trim_leading_whitespace_mut(state);

            // Parse first element
            if let Some(value) = self.call(state) {
                values.push(value);
            } else if lower_bound == 0 {
                return Some(values);
            } else {
                return None;
            }

            while values.len() < upper_bound {
                let cp = state.offset;
                // Trim before separator — bypass sep's own flag dispatch
                // since we're handling whitespace
                trim_leading_whitespace_mut(state);
                if sep.parser_fn.call(state).is_none() {
                    state.offset = cp;
                    break;
                }
                // Trim before next element
                trim_leading_whitespace_mut(state);
                if let Some(value) = self.call(state) {
                    values.push(value);
                } else {
                    state.offset = cp;
                    break;
                }
            }

            if values.len() >= lower_bound {
                // Post-trim after the last element
                trim_leading_whitespace_mut(state);
                Some(values)
            } else {
                None
            }
        };

        Parser::new(sep_by_ws)
    }

    /// Error recovery combinator. On success, returns the result normally.
    /// On failure, snapshots the current diagnostic into the collected
    /// diagnostics list, then runs `sync` to skip past the bad content
    /// and returns `sentinel`.
    ///
    /// This enables `many()` / `sep_by()` loops to keep going — each failed
    /// element produces a diagnostic but doesn't halt the overall parse.
    #[cfg(feature = "diagnostics")]
    pub fn recover(self, sync: Parser<'a, ()>, sentinel: Output) -> Parser<'a, Output>
    where
        Output: Clone,
    {
        use crate::state::{pop_last_diagnostic, push_diagnostic};

        let recover = move |state: &mut ParserState<'a>| {
            let checkpoint = state.offset;
            if let Some(value) = self.call(state) {
                return Some(value);
            }

            // Snapshot diagnostic, then try to sync forward
            let diag = state.snapshot_diagnostic(checkpoint);
            push_diagnostic(diag);

            state.offset = checkpoint;
            if sync.call(state).is_some() {
                // Sync succeeded — return sentinel
                Some(sentinel.clone())
            } else {
                // Sync failed — pop the diagnostic and give up
                pop_last_diagnostic();
                state.offset = checkpoint;
                None
            }
        };
        Parser::new(recover)
    }

    /// No-op version without diagnostics feature — just runs the inner parser.
    #[cfg(not(feature = "diagnostics"))]
    pub fn recover(self, _sync: Parser<'a, ()>, _sentinel: Output) -> Parser<'a, Output>
    where
        Output: Clone,
    {
        panic!("recover() requires the `diagnostics` feature")
    }

    #[inline]
    pub fn look_ahead<Output2>(self, parser: Parser<'a, Output2>) -> Parser<'a, Output>
    where
        Output2: 'a,
    {
        let look_ahead = move |state: &mut ParserState<'a>| {
            let value = self.call(state)?;
            let offset_after_self = state.offset;
            let lookahead_result = parser.call(state);
            state.offset = offset_after_self;
            lookahead_result?;
            Some(value)
        };
        Parser::new(look_ahead)
    }
}

impl<'a, Output2> std::ops::BitOr<Parser<'a, Output2>> for Parser<'a, Output2>
where
    Output2: 'a,
{
    type Output = Parser<'a, Output2>;

    #[inline]
    fn bitor(self, other: Parser<'a, Output2>) -> Self::Output {
        self.or(other)
    }
}

impl<'a, Output, Output2> std::ops::Add<Parser<'a, Output2>> for Parser<'a, Output>
where
    Output: 'a,
    Output2: 'a,
{
    type Output = Parser<'a, (Output, Output2)>;

    #[inline]
    fn add(self, other: Parser<'a, Output2>) -> Self::Output {
        self.then(other)
    }
}

#[path = "span_trait.rs"]
mod span_trait;
pub use span_trait::*;

// ── seq!: flat N-ary sequential combinator ────────────────────
// Creates a single Box<dyn ParserFn> instead of N-1 intermediate boxes.
// Usage: seq!(p1, p2) → Parser<(O1, O2)>, seq!(p1, p2, p3) → Parser<(O1, O2, O3)>, etc.

#[macro_export]
macro_rules! seq {
    ($p1:expr, $p2:expr) => {
        $crate::Parser::new(move |state| {
            let v1 = $p1.call(state)?;
            let v2 = $p2.call(state)?;
            Some((v1, v2))
        })
    };
    ($p1:expr, $p2:expr, $p3:expr) => {
        $crate::Parser::new(move |state| {
            let v1 = $p1.call(state)?;
            let v2 = $p2.call(state)?;
            let v3 = $p3.call(state)?;
            Some((v1, v2, v3))
        })
    };
    ($p1:expr, $p2:expr, $p3:expr, $p4:expr) => {
        $crate::Parser::new(move |state| {
            let v1 = $p1.call(state)?;
            let v2 = $p2.call(state)?;
            let v3 = $p3.call(state)?;
            let v4 = $p4.call(state)?;
            Some((v1, v2, v3, v4))
        })
    };
    ($p1:expr, $p2:expr, $p3:expr, $p4:expr, $p5:expr) => {
        $crate::Parser::new(move |state| {
            let v1 = $p1.call(state)?;
            let v2 = $p2.call(state)?;
            let v3 = $p3.call(state)?;
            let v4 = $p4.call(state)?;
            let v5 = $p5.call(state)?;
            Some((v1, v2, v3, v4, v5))
        })
    };
    ($p1:expr, $p2:expr, $p3:expr, $p4:expr, $p5:expr, $p6:expr) => {
        $crate::Parser::new(move |state| {
            let v1 = $p1.call(state)?;
            let v2 = $p2.call(state)?;
            let v3 = $p3.call(state)?;
            let v4 = $p4.call(state)?;
            let v5 = $p5.call(state)?;
            let v6 = $p6.call(state)?;
            Some((v1, v2, v3, v4, v5, v6))
        })
    };
    ($p1:expr, $p2:expr, $p3:expr, $p4:expr, $p5:expr, $p6:expr, $p7:expr) => {
        $crate::Parser::new(move |state| {
            let v1 = $p1.call(state)?;
            let v2 = $p2.call(state)?;
            let v3 = $p3.call(state)?;
            let v4 = $p4.call(state)?;
            let v5 = $p5.call(state)?;
            let v6 = $p6.call(state)?;
            let v7 = $p7.call(state)?;
            Some((v1, v2, v3, v4, v5, v6, v7))
        })
    };
    ($p1:expr, $p2:expr, $p3:expr, $p4:expr, $p5:expr, $p6:expr, $p7:expr, $p8:expr) => {
        $crate::Parser::new(move |state| {
            let v1 = $p1.call(state)?;
            let v2 = $p2.call(state)?;
            let v3 = $p3.call(state)?;
            let v4 = $p4.call(state)?;
            let v5 = $p5.call(state)?;
            let v6 = $p6.call(state)?;
            let v7 = $p7.call(state)?;
            let v8 = $p8.call(state)?;
            Some((v1, v2, v3, v4, v5, v6, v7, v8))
        })
    };
}

// ── alt!: flat N-ary alternation combinator ───────────────────
// Creates a single Box<dyn ParserFn> instead of N-1 intermediate boxes.
// Usage: alt!(p1, p2) → Parser<O>, alt!(p1, p2, p3) → Parser<O>, etc.

#[macro_export]
macro_rules! alt {
    ($p1:expr, $p2:expr) => {
        $crate::Parser::new(move |state| {
            let cp = state.offset;
            if let Some(v) = $p1.call(state) {
                return Some(v);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = cp;
            if let Some(v) = $p2.call(state) {
                return Some(v);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = cp;
            None
        })
    };
    ($p1:expr, $p2:expr, $p3:expr) => {
        $crate::Parser::new(move |state| {
            let cp = state.offset;
            if let Some(v) = $p1.call(state) {
                return Some(v);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = cp;
            if let Some(v) = $p2.call(state) {
                return Some(v);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = cp;
            if let Some(v) = $p3.call(state) {
                return Some(v);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = cp;
            None
        })
    };
    ($p1:expr, $p2:expr, $p3:expr, $p4:expr) => {
        $crate::Parser::new(move |state| {
            let cp = state.offset;
            if let Some(v) = $p1.call(state) {
                return Some(v);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = cp;
            if let Some(v) = $p2.call(state) {
                return Some(v);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = cp;
            if let Some(v) = $p3.call(state) {
                return Some(v);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = cp;
            if let Some(v) = $p4.call(state) {
                return Some(v);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = cp;
            None
        })
    };
    ($p1:expr, $p2:expr, $p3:expr, $p4:expr, $p5:expr) => {
        $crate::Parser::new(move |state| {
            let cp = state.offset;
            if let Some(v) = $p1.call(state) {
                return Some(v);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = cp;
            if let Some(v) = $p2.call(state) {
                return Some(v);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = cp;
            if let Some(v) = $p3.call(state) {
                return Some(v);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = cp;
            if let Some(v) = $p4.call(state) {
                return Some(v);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = cp;
            if let Some(v) = $p5.call(state) {
                return Some(v);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = cp;
            None
        })
    };
    ($p1:expr, $p2:expr, $p3:expr, $p4:expr, $p5:expr, $p6:expr) => {
        $crate::Parser::new(move |state| {
            let cp = state.offset;
            if let Some(v) = $p1.call(state) {
                return Some(v);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = cp;
            if let Some(v) = $p2.call(state) {
                return Some(v);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = cp;
            if let Some(v) = $p3.call(state) {
                return Some(v);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = cp;
            if let Some(v) = $p4.call(state) {
                return Some(v);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = cp;
            if let Some(v) = $p5.call(state) {
                return Some(v);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = cp;
            if let Some(v) = $p6.call(state) {
                return Some(v);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = cp;
            None
        })
    };
    ($p1:expr, $p2:expr, $p3:expr, $p4:expr, $p5:expr, $p6:expr, $p7:expr) => {
        $crate::Parser::new(move |state| {
            let cp = state.offset;
            if let Some(v) = $p1.call(state) {
                return Some(v);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = cp;
            if let Some(v) = $p2.call(state) {
                return Some(v);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = cp;
            if let Some(v) = $p3.call(state) {
                return Some(v);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = cp;
            if let Some(v) = $p4.call(state) {
                return Some(v);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = cp;
            if let Some(v) = $p5.call(state) {
                return Some(v);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = cp;
            if let Some(v) = $p6.call(state) {
                return Some(v);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = cp;
            if let Some(v) = $p7.call(state) {
                return Some(v);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = cp;
            None
        })
    };
    ($p1:expr, $p2:expr, $p3:expr, $p4:expr, $p5:expr, $p6:expr, $p7:expr, $p8:expr) => {
        $crate::Parser::new(move |state| {
            let cp = state.offset;
            if let Some(v) = $p1.call(state) {
                return Some(v);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = cp;
            if let Some(v) = $p2.call(state) {
                return Some(v);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = cp;
            if let Some(v) = $p3.call(state) {
                return Some(v);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = cp;
            if let Some(v) = $p4.call(state) {
                return Some(v);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = cp;
            if let Some(v) = $p5.call(state) {
                return Some(v);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = cp;
            if let Some(v) = $p6.call(state) {
                return Some(v);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = cp;
            if let Some(v) = $p7.call(state) {
                return Some(v);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = cp;
            if let Some(v) = $p8.call(state) {
                return Some(v);
            }
            state.furthest_offset = state.furthest_offset.max(state.offset);
            state.offset = cp;
            None
        })
    };
}