oxideav-mjpeg 0.1.8

// Parallel-array index loops are idiomatic in codec code; skip the lint.
#![allow(clippy::needless_range_loop)]
// When built without the `registry` feature, large swathes of the
// decoder/encoder (the JPEG entry-point + render helpers) have no
// callers — they're only reachable via the `Decoder` / `Encoder`
// trait implementations that live behind the `registry` feature.
// Suppress the resulting dead-code warnings rather than gating every
// helper.
#![cfg_attr(not(feature = "registry"), allow(dead_code))]

//! JPEG / Motion-JPEG codec, pure Rust.
//!
//! Each video packet is a standalone JPEG (one full SOI..EOI). The decoder
//! recognises baseline (SOF0), extended-sequential (SOF1), progressive
//! (SOF2), and lossless (SOF3) JPEGs with 4:2:0 / 4:2:2 / 4:4:4 chroma
//! subsampling (DCT variants) and outputs `MjpegFrame`s in the matching
//! `Yuv*P` pixel format or `Gray8` for 1-component streams. SOF0 and
//! SOF1 share the same Huffman sequential scan structure at 8-bit
//! precision; both are handled by the same scan decoder, and
//! non-interleaved sequential scans (one SOS per component) fall back
//! to the same coefficient-accumulator path used by the progressive
//! decoder. Progressive scans accumulate DCT coefficients across
//! multiple SOS segments using both spectral selection and successive
//! approximation; the inverse DCT runs once after EOI. Restart markers
//! (`RSTn`) and DRI segments are honoured on both paths. APP0..APP15
//! segments (JFIF, EXIF, ICC, XMP, …) are skipped without parsing. The
//! encoder accepts the same pixel formats and produces a standalone
//! baseline JPEG using the Annex K "typical" Huffman tables, so its
//! output is interoperable with any compliant JPEG decoder. A
//! progressive (SOF2) output mode is available via
//! `encoder::MjpegEncoder::set_progressive` or
//! `encoder::encode_jpeg_progressive`; it emits a DC-first scan
//! followed by two per-component AC band scans (spectral selection
//! only, `Ah = Al = 0`). A lossless (SOF3) grayscale output mode is
//! available via `encoder::encode_lossless_jpeg_grayscale` (or
//! `MjpegEncoder::set_lossless(true)` on the trait-API encoder):
//! every precision `P ∈ 2..=16` and every Annex H Table H.1 spatial
//! predictor `1..=7` are supported, and the bitstream round-trips
//! bit-exact through the matching SOF3 decoder.
//!
//! 4-component (CMYK / Adobe YCCK) JPEGs decode to packed `Cmyk` — the
//! decoder inspects the APP14 Adobe transform flag to choose among plain
//! CMYK, Adobe-inverted CMYK, and Adobe YCCK (which is colour-converted
//! back to CMYK via BT.601 full-range YCbCr→RGB→CMY plus K inversion).
//! The 4-component path covers both the sequential (SOF0 / SOF1) and the
//! progressive (SOF2) scan decompositions at `P = 8`. 12-bit precision
//! sequential JPEGs (SOF0/SOF1 with `P=12`) decode to `Gray12Le` /
//! `Yuv444P12Le` / `Yuv422P12Le` / `Yuv420P12Le`; sample buffers stay
//! 16-bit throughout the inverse DCT and the level shift uses 2048.
//! Lossless JPEGs (SOF3) decode at every precision `P ∈ 2..=16` via
//! Annex H predictor reconstruction (bit-exact, no DCT). Single-component
//! grayscale output: `Gray8` at `P = 8`, `Gray10Le` / `Gray12Le` at
//! `P = 10`/12, `Gray16Le` everywhere else. Three-component (RGB-class,
//! `H_i = V_i = 1`) output: packed `Rgb24` at `P = 8`, planar
//! `Gbrp10Le` / `Gbrp12Le` / `Gbrp14Le` at `P = 10`/12/14, packed
//! `Rgb48Le` at every other precision in the valid range.
//!
//! Extended-sequential arithmetic (SOF9) is decoded via the Q-coder /
//! arithmetic entropy decoder from T.81 Annex D + F.2.4. The DAC marker
//! (Define Arithmetic Conditioning) is parsed when present; if absent the
//! decoder uses the spec defaults `(L=0, U=1)` for DC / lossless
//! conditioning and `Kx=5` for AC. Progressive arithmetic (SOF10) is
//! decoded via the same Q-coder under the T.81 §G.1.3 procedures: DC
//! first scans reuse the §F.1.4.1 model on the point-transformed
//! values, DC refinement bits use the fixed 0.5 estimate, AC first
//! scans run the §F.1.4 procedure per band (`Kmin = Ss`, EOB =
//! end-of-band), and AC refinement scans follow the §G.1.3.3 model
//! (Figures G.10 / G.11, Table G.2) — at `P = 8` and `P = 12` with
//! the same output shaping as the Huffman progressive (SOF2) path,
//! 4-component CMYK / YCCK included at `P = 8`. Lossless arithmetic
//! (SOF11) is decoded via the same Q-coder under the two-dimensional
//! statistical model of §H.1.2.3 (binary decisions conditioned on the
//! left / above difference classifications through the Figure H.2
//! array), covering the full Annex H surface the SOF3 path handles:
//! every precision, every predictor, point transform and restart
//! intervals.
//!
//! **Not supported** (will return `Error::Unsupported`):
//! - Hierarchical (SOF5..SOF7, SOF13..SOF15) JPEGs
//! - 12-bit progressive 4-component JPEGs (the workspace `PixelFormat`
//!   enum has no 12-bit CMYK variant; `P=8` 4-component CMYK / YCCK
//!   *is* supported on both the sequential and progressive scan
//!   decompositions).
//!
//! Motion-JPEG carried over RTP (RFC 2435) is supported on the decode
//! path via [`rtp::JpegDepacketizer`], which reassembles fragmented
//! RTP/JPEG payloads and reconstructs the absent SOI / DQT / SOF0 / DHT /
//! SOS / EOI marker segments (from the §3.1 main header's Q field or an
//! in-band §3.1.8 quantization-table header) so the result is a complete
//! JPEG interchange stream the [`decoder`] consumes directly.
//!
//! ## Standalone vs registry-integrated
//!
//! The crate's default `registry` Cargo feature pulls in `oxideav-core`
//! and exposes the `Decoder` / `Encoder` trait surface, the JPEG-still
//! container, and the [`registry::register`] / [`registry::register_codecs`]
//! / [`registry::register_containers`] entry points. Disable the feature (`default-features = false`) for
//! an oxideav-core-free build that still exposes the standalone
//! [`decoder::decode_jpeg`] API plus crate-local [`MjpegFrame`] /
//! [`MjpegPlane`] / [`MjpegPixelFormat`] / [`MjpegError`] types built
//! only on `std`.

pub mod decoder;
pub mod encoder;
pub mod error;
pub mod image;
pub mod jpeg;
pub mod rtp;

#[cfg(feature = "registry")]
pub mod container;

#[cfg(feature = "registry")]
pub mod mjpeg_container;

#[cfg(feature = "registry")]
pub mod registry;

pub const CODEC_ID_STR: &str = "mjpeg";

// Standalone, framework-free API. Available regardless of the
// `registry` feature.
pub use error::{MjpegError, Result};
pub use image::{MjpegFrame, MjpegPixelFormat, MjpegPlane};

// Decode-free JPEG inspector — classifies the SOF variant + reports
// dimensions / components / chroma-subsampling / colour hint without
// running the entropy decoder. Standalone surface, no `oxideav-core`
// dependency.
pub use jpeg::inspect::{
    inspect_jpeg, parse_adobe_app14, parse_icc_profile_app2, parse_jfif_app0, parse_jfxx_app0,
    AdobeApp14, AdobeColorTransform, ChromaSubsampling, ColorHint, IccProfileApp2Chunk,
    IccProfileChunks, InspectedComponent, JfifApp0, JfifUnits, JfxxApp0, JfxxThumbnail, JpegInfo,
    SofKind,
};

// Framework-integrated API (`oxideav-core`-dependent). Gated behind
// `registry` so image-library callers can build the crate without
// dragging in `oxideav-core`.
#[cfg(feature = "registry")]
pub use registry::{__oxideav_entry, register, register_codecs, register_containers};

#[cfg(all(test, feature = "registry"))]
mod register_tests {
    use oxideav_core::RuntimeContext;

    #[test]
    fn register_via_runtime_context_installs_factories() {
        let mut ctx = RuntimeContext::new();
        super::register(&mut ctx);
        assert!(
            ctx.codecs.decoder_ids().next().is_some(),
            "register(ctx) should install codec decoder factories"
        );
        assert!(
            ctx.containers.demuxer_names().next().is_some(),
            "register(ctx) should install container demuxer factories"
        );
    }
}