offline-protocol 0.21.0

//! File transfer with chunking and reassembly.

use crate::constants::DEFAULT_CHUNK_SIZE;
use serde::{Deserialize, Serialize};
use sha2::{Digest, Sha256};
use std::collections::hash_map::RandomState;
use std::collections::{HashMap, HashSet, VecDeque};
use std::hash::BuildHasher;
use std::time::{Duration, Instant};

mod base64_bytes {
    use base64::{engine::general_purpose::STANDARD, Engine};
    use serde::{Deserialize, Deserializer, Serializer};

    pub fn serialize<S>(bytes: &[u8], serializer: S) -> Result<S::Ok, S::Error>
    where
        S: Serializer,
    {
        serializer.serialize_str(&STANDARD.encode(bytes))
    }

    pub fn deserialize<'de, D>(deserializer: D) -> Result<Vec<u8>, D::Error>
    where
        D: Deserializer<'de>,
    {
        let s = String::deserialize(deserializer)?;
        STANDARD.decode(&s).map_err(serde::de::Error::custom)
    }
}

/// File transfer configuration.
#[derive(Debug, Clone)]
pub struct FileTransferConfig {
    /// Size of each chunk in bytes. Chunk sizes that would split a file
    /// into more chunks than the receive-side cap derived from
    /// `max_file_size` (one chunk per KiB of `max_file_size`, minimum 1024)
    /// are rejected by [`FileTransferManager::chunk_file`] — a receiver
    /// with the same configuration would drop every chunk of such a
    /// transfer.
    pub chunk_size: usize,

    /// Maximum file size allowed (bytes).
    pub max_file_size: u64,

    /// Maximum number of inbound files that may be reassembling at once.
    /// Chunks that would start an additional assembly are rejected; slots
    /// free when a transfer completes, is cancelled, or goes stale.
    pub max_concurrent_assemblies: usize,

    /// Maximum number of inbound files a single sender may have reassembling
    /// at once, so one peer cannot occupy every assembly slot. Only as
    /// strong as sender authentication: MLS-path senders are
    /// cryptographically bound, but legacy plaintext senders are wire
    /// claims a peer can rotate — there, this quota bounds only honest
    /// peers, and the global count and byte caps are the real limits.
    pub max_assemblies_per_sender: usize,

    /// Maximum total bytes buffered across all inbound assemblies. This —
    /// not the assembly counts — is the hard bound on receive-path memory.
    /// Each stored chunk is charged its payload plus a small fixed
    /// bookkeeping overhead, so floods of tiny chunks cannot pin more
    /// memory than the budget admits. Values below what a single
    /// `max_file_size` transfer charges are clamped up to it by
    /// [`FileTransferManager::with_config`], or a maximum-size file could
    /// never complete.
    pub max_total_buffered_bytes: u64,
}

impl Default for FileTransferConfig {
    fn default() -> Self {
        Self {
            chunk_size: DEFAULT_CHUNK_SIZE,
            max_file_size: 100 * 1024 * 1024, // 100 MB
            max_concurrent_assemblies: 32,
            max_assemblies_per_sender: 16,
            max_total_buffered_bytes: 128 * 1024 * 1024, // 128 MB
        }
    }
}

/// Why [`FileTransferManager::process_chunk`] refused a chunk.
#[derive(Debug, Clone, Copy, PartialEq, Eq)]
pub enum ChunkRejection {
    /// Wire fields are malformed or out of bounds: zero or oversized size
    /// claims, empty or oversized data, or bytes exceeding the claimed
    /// file size.
    Invalid,
    /// Chunk metadata does not match the existing assembly for this file id.
    MetadataMismatch,
    /// Chunk sender does not match the sender that started the assembly.
    SenderMismatch,
    /// The global concurrent-assembly cap is reached.
    TooManyTransfers,
    /// The sender's concurrent-assembly quota is reached.
    SenderQuotaExceeded,
    /// Accepting the chunk would exceed the global buffered-bytes budget.
    /// The affected assembly is dropped along with the chunk: a dropped
    /// chunk is never retransmitted, so the transfer could no longer
    /// complete and its buffer would only prolong the exhaustion.
    BufferBudgetExhausted,
    /// The chunk belongs to a transfer that already failed (resource drop,
    /// integrity failure, or stale sweep). Its remaining in-flight chunks
    /// are dropped without re-creating assembly state or re-notifying the
    /// application — `FileReceiveFailed` fires at most once per transfer.
    /// Retries must use a fresh `file_id`; the failed id is admitted again
    /// only after its tombstone expires (no chunks for the stale timeout).
    PreviouslyFailed,
}

impl ChunkRejection {
    /// `true` for rejections caused by receiver resource limits rather than
    /// malformed input — the cases where a well-formed transfer was lost and
    /// the application should be told.
    pub fn is_resource_exhaustion(self) -> bool {
        matches!(
            self,
            Self::TooManyTransfers | Self::SenderQuotaExceeded | Self::BufferBudgetExhausted
        )
    }

    /// Stable machine-readable reason string, carried by the
    /// `FileReceiveFailed` event.
    pub fn as_str(self) -> &'static str {
        match self {
            Self::Invalid => "invalid_chunk",
            Self::MetadataMismatch => "metadata_mismatch",
            Self::SenderMismatch => "sender_mismatch",
            Self::TooManyTransfers => "too_many_transfers",
            Self::SenderQuotaExceeded => "sender_quota_exceeded",
            Self::BufferBudgetExhausted => "buffer_budget_exhausted",
            Self::PreviouslyFailed => "previously_failed",
        }
    }
}

/// Why [`FileChunk::from_bytes`] rejected a binary payload.
// Adding a variant to a public error enum is a breaking change without
// this attribute; downstream crates must carry a wildcard arm.
#[non_exhaustive]
#[derive(Debug, Clone, PartialEq, Eq, thiserror::Error)]
pub enum ChunkDecodeError {
    /// The payload ended before the named value could be read.
    #[error("unexpected end of data reading {what}")]
    UnexpectedEof {
        /// What was being read (`"u32"`, `"u64"`, or `"bytes"`).
        what: &'static str,
    },
    /// A length prefix exceeds the wire-format cap for its field.
    #[error("{field} {len} exceeds maximum {max}")]
    FieldTooLong {
        /// Name of the offending length field.
        field: &'static str,
        /// Claimed length.
        len: usize,
        /// Maximum allowed length.
        max: usize,
    },
    /// A string field holds invalid UTF-8.
    #[error("invalid {field} UTF-8: {source}")]
    InvalidUtf8 {
        /// Name of the offending string field.
        field: &'static str,
        /// The underlying UTF-8 decode failure.
        source: std::string::FromUtf8Error,
    },
}

/// A file chunk message.
#[derive(Debug, Clone, Serialize, Deserialize)]
pub struct FileChunk {
    /// Unique file identifier.
    pub file_id: String,

    /// Original file name.
    pub file_name: String,

    /// Total file size in bytes.
    pub file_size: u64,

    /// Total number of chunks.
    pub total_chunks: u32,

    /// Index of this chunk (0-based).
    pub chunk_index: u32,

    /// Chunk data (base64-encoded in JSON).
    #[serde(with = "base64_bytes")]
    pub chunk_data: Vec<u8>,

    /// Checksum of the complete file (SHA256 hex string).
    pub file_checksum: String,
}

impl FileChunk {
    /// Serializes to JSON (kept for backward compatibility).
    pub fn to_json(&self) -> Result<String, serde_json::Error> {
        serde_json::to_string(self)
    }

    /// Deserializes from JSON (kept for backward compatibility).
    pub fn from_json(json: &str) -> Result<Self, serde_json::Error> {
        serde_json::from_str(json)
    }

    /// Serializes to a compact binary format, avoiding base64/JSON overhead.
    ///
    /// Wire format (all multi-byte integers are little-endian):
    /// ```text
    /// [file_id_len:4][file_id][file_name_len:4][file_name]
    /// [file_size:8][total_chunks:4][chunk_index:4]
    /// [chunk_data_len:4][chunk_data]
    /// [checksum_len:4][checksum]
    /// ```
    pub fn to_bytes(&self) -> Vec<u8> {
        let file_id = self.file_id.as_bytes();
        let file_name = self.file_name.as_bytes();
        let checksum = self.file_checksum.as_bytes();

        let capacity = 4
            + file_id.len()
            + 4
            + file_name.len()
            + 8
            + 4
            + 4
            + 4
            + self.chunk_data.len()
            + 4
            + checksum.len();
        let mut buf = Vec::with_capacity(capacity);

        buf.extend_from_slice(&(file_id.len() as u32).to_le_bytes());
        buf.extend_from_slice(file_id);
        buf.extend_from_slice(&(file_name.len() as u32).to_le_bytes());
        buf.extend_from_slice(file_name);
        buf.extend_from_slice(&self.file_size.to_le_bytes());
        buf.extend_from_slice(&self.total_chunks.to_le_bytes());
        buf.extend_from_slice(&self.chunk_index.to_le_bytes());
        buf.extend_from_slice(&(self.chunk_data.len() as u32).to_le_bytes());
        buf.extend_from_slice(&self.chunk_data);
        buf.extend_from_slice(&(checksum.len() as u32).to_le_bytes());
        buf.extend_from_slice(checksum);

        buf
    }

    /// Maximum allowed length for a string field (file_id, file_name, checksum)
    /// in the binary wire format. Prevents allocation bombs from crafted
    /// payloads. `pub(crate)`: also bounds caller-supplied file ids at the
    /// `send_media_with` boundary.
    pub(crate) const MAX_STRING_FIELD_LEN: usize = 4096;
    /// Maximum allowed chunk data length in the binary wire format.
    const MAX_CHUNK_DATA_LEN: usize = 128 * 1024 * 1024; // 128 MB

    /// Deserializes from the compact binary format produced by `to_bytes`.
    pub fn from_bytes(data: &[u8]) -> Result<Self, ChunkDecodeError> {
        let mut pos = 0;

        let read_u32 = |pos: &mut usize| -> Result<u32, ChunkDecodeError> {
            if *pos + 4 > data.len() {
                return Err(ChunkDecodeError::UnexpectedEof { what: "u32" });
            }
            let mut bytes = [0u8; 4];
            bytes.copy_from_slice(&data[*pos..*pos + 4]);
            let val = u32::from_le_bytes(bytes);
            *pos += 4;
            Ok(val)
        };

        let read_u64 = |pos: &mut usize| -> Result<u64, ChunkDecodeError> {
            if *pos + 8 > data.len() {
                return Err(ChunkDecodeError::UnexpectedEof { what: "u64" });
            }
            let mut bytes = [0u8; 8];
            bytes.copy_from_slice(&data[*pos..*pos + 8]);
            let val = u64::from_le_bytes(bytes);
            *pos += 8;
            Ok(val)
        };

        let read_bytes = |pos: &mut usize, len: usize| -> Result<Vec<u8>, ChunkDecodeError> {
            if *pos + len > data.len() {
                return Err(ChunkDecodeError::UnexpectedEof { what: "bytes" });
            }
            let val = data[*pos..*pos + len].to_vec();
            *pos += len;
            Ok(val)
        };

        let file_id_len = read_u32(&mut pos)? as usize;
        if file_id_len > Self::MAX_STRING_FIELD_LEN {
            return Err(ChunkDecodeError::FieldTooLong {
                field: "file_id_len",
                len: file_id_len,
                max: Self::MAX_STRING_FIELD_LEN,
            });
        }
        let file_id = String::from_utf8(read_bytes(&mut pos, file_id_len)?).map_err(|e| {
            ChunkDecodeError::InvalidUtf8 {
                field: "file_id",
                source: e,
            }
        })?;

        let file_name_len = read_u32(&mut pos)? as usize;
        if file_name_len > Self::MAX_STRING_FIELD_LEN {
            return Err(ChunkDecodeError::FieldTooLong {
                field: "file_name_len",
                len: file_name_len,
                max: Self::MAX_STRING_FIELD_LEN,
            });
        }
        let file_name = String::from_utf8(read_bytes(&mut pos, file_name_len)?).map_err(|e| {
            ChunkDecodeError::InvalidUtf8 {
                field: "file_name",
                source: e,
            }
        })?;

        let file_size = read_u64(&mut pos)?;
        let total_chunks = read_u32(&mut pos)?;
        let chunk_index = read_u32(&mut pos)?;

        let chunk_data_len = read_u32(&mut pos)? as usize;
        if chunk_data_len > Self::MAX_CHUNK_DATA_LEN {
            return Err(ChunkDecodeError::FieldTooLong {
                field: "chunk_data_len",
                len: chunk_data_len,
                max: Self::MAX_CHUNK_DATA_LEN,
            });
        }
        let chunk_data = read_bytes(&mut pos, chunk_data_len)?;

        let checksum_len = read_u32(&mut pos)? as usize;
        if checksum_len > Self::MAX_STRING_FIELD_LEN {
            return Err(ChunkDecodeError::FieldTooLong {
                field: "checksum_len",
                len: checksum_len,
                max: Self::MAX_STRING_FIELD_LEN,
            });
        }
        let file_checksum =
            String::from_utf8(read_bytes(&mut pos, checksum_len)?).map_err(|e| {
                ChunkDecodeError::InvalidUtf8 {
                    field: "checksum",
                    source: e,
                }
            })?;

        Ok(Self {
            file_id,
            file_name,
            file_size,
            total_chunks,
            chunk_index,
            chunk_data,
            file_checksum,
        })
    }
}

/// File transfer progress information.
#[derive(Debug, Clone, Serialize, Deserialize)]
pub struct FileProgress {
    /// File identifier.
    pub file_id: String,

    /// File name.
    pub file_name: String,

    /// Total file size.
    pub file_size: u64,

    /// Number of chunks sent/received.
    pub chunks_completed: u32,

    /// Total number of chunks.
    pub total_chunks: u32,

    /// Progress percentage (0-100).
    pub percentage: u8,
}

impl FileProgress {
    /// Calculates the progress percentage.
    pub fn calculate_percentage(chunks_completed: u32, total_chunks: u32) -> u8 {
        if total_chunks == 0 {
            return 0;
        }
        ((chunks_completed as f32 / total_chunks as f32) * 100.0) as u8
    }
}

/// An incomplete transfer removed by
/// [`FileTransferManager::cleanup_stale_transfers`].
#[derive(Debug, Clone, PartialEq, Eq)]
pub struct StaleTransfer {
    /// File identifier of the dropped transfer.
    pub file_id: String,
    /// File name from the chunk metadata.
    pub file_name: String,
    /// Sender the assembly was bound to.
    pub sender: String,
}

/// Tracks file reassembly state.
struct FileAssembly {
    /// Sender the first accepted chunk arrived from; all later chunks must
    /// match it.
    sender: String,
    file_name: String,
    file_size: u64,
    total_chunks: u32,
    file_checksum: String,
    received_chunks: HashMap<u32, Vec<u8>>,
    /// Total bytes currently held in `received_chunks`.
    received_bytes: u64,
    last_updated_at: Instant,
}

impl FileAssembly {
    fn new(sender: &str, chunk: &FileChunk) -> Self {
        Self {
            sender: sender.to_string(),
            file_name: chunk.file_name.clone(),
            file_size: chunk.file_size,
            total_chunks: chunk.total_chunks,
            file_checksum: chunk.file_checksum.clone(),
            received_chunks: HashMap::new(),
            received_bytes: 0,
            last_updated_at: Instant::now(),
        }
    }

    fn add_chunk(&mut self, chunk_index: u32, data: Vec<u8>) {
        if let Some(old) = self.received_chunks.get(&chunk_index) {
            self.received_bytes -= old.len() as u64;
        }
        self.received_bytes += data.len() as u64;
        self.received_chunks.insert(chunk_index, data);
        self.last_updated_at = Instant::now();
    }

    /// Bytes this assembly charges against the global buffer budget:
    /// payload plus a fixed per-chunk bookkeeping charge, so many tiny
    /// chunks cannot evade the budget.
    fn charged_bytes(&self) -> u64 {
        self.received_bytes
            + self.received_chunks.len() as u64 * FileTransferManager::PER_CHUNK_OVERHEAD
    }

    fn is_complete(&self) -> bool {
        if self.total_chunks == 0 || self.received_chunks.len() != self.total_chunks as usize {
            return false;
        }

        (0..self.total_chunks).all(|chunk_index| self.received_chunks.contains_key(&chunk_index))
    }

    fn progress(&self) -> FileProgress {
        FileProgress {
            file_id: String::new(), // Will be set by caller
            file_name: self.file_name.clone(),
            file_size: self.file_size,
            chunks_completed: self.received_chunks.len() as u32,
            total_chunks: self.total_chunks,
            percentage: FileProgress::calculate_percentage(
                self.received_chunks.len() as u32,
                self.total_chunks,
            ),
        }
    }

    fn reassemble(&self) -> Option<Vec<u8>> {
        if !self.is_complete() {
            return None;
        }

        // Size the buffer from bytes actually received — file_size is a
        // sender-controlled claim and must never drive an allocation.
        let mut file_data = Vec::with_capacity(self.received_bytes as usize);

        // Reassemble chunks in order
        for i in 0..self.total_chunks {
            let chunk_data = self.received_chunks.get(&i)?; // Missing chunk
            file_data.extend_from_slice(chunk_data);
        }

        Some(file_data)
    }
}

/// File transfer manager for chunking and reassembly.
pub struct FileTransferManager {
    config: FileTransferConfig,
    active_assemblies: HashMap<String, FileAssembly>,
    /// Tombstones for failed transfers, keyed by a keyed hash of the
    /// `file_id` (never the id itself, so attacker-length ids cannot grow
    /// this map) mapping to the last time a chunk for that id was seen.
    /// While tombstoned, an id's chunks are dropped as `PreviouslyFailed` —
    /// they were already ACKed and will keep streaming in, but must neither
    /// resurrect a partial assembly nor re-emit the failure event.
    failed_transfers: HashMap<u64, Instant>,
    /// Insertion order of `failed_transfers` keys, for FIFO eviction at
    /// [`Self::TOMBSTONE_CAPACITY`].
    failed_transfer_order: VecDeque<u64>,
    /// Randomly keyed hasher for tombstone keys: collisions (a fresh
    /// transfer misread as previously failed) cannot be crafted by a peer
    /// and are a ~2⁻⁵⁴ accident at capacity.
    tombstone_hasher: RandomState,
}

impl FileTransferManager {
    /// Floor on the average chunk payload assumed when bounding a sender's
    /// `total_chunks` claim, so per-assembly bookkeeping stays proportional
    /// to `max_file_size` even when every chunk is tiny. The SDK's own
    /// senders never chunk below `CHUNK_SIZE_BLE` (4 KiB).
    const MIN_ACCEPTED_CHUNK_PAYLOAD: u64 = 1024;

    /// Lower bound on the derived `total_chunks` cap so configurations with
    /// a small `max_file_size` still admit fine-grained chunking.
    const MIN_TOTAL_CHUNKS_CAP: u64 = 1024;

    /// Flat per-stored-chunk charge against `max_total_buffered_bytes`,
    /// approximating the bookkeeping memory the payload sum does not see
    /// (hashmap entry, allocator rounding). Without it, a flood of 1-byte
    /// chunks pins far more memory than the budget records.
    const PER_CHUNK_OVERHEAD: u64 = 64;

    /// Pseudo-sender bound to assemblies fed through the manual
    /// `process_file_chunk` FFI path, which carries no wire sender. All
    /// manual chunks share this identity for sender binding and quota. The
    /// `:` is rejected by wire `UserId` validation, so no remote peer can
    /// ever claim this identity.
    pub const MANUAL_SENDER: &'static str = "manual:ffi";

    /// Most failed-transfer tombstones retained at once. Each costs ~50
    /// bytes (hash key, timestamp, deque slot), so the set is capped around
    /// 50 KiB. Evicting a tombstone early only means one extra
    /// `FileReceiveFailed` if that transfer's chunks are still arriving —
    /// filling the set costs an attacker one rejected transfer per slot.
    const TOMBSTONE_CAPACITY: usize = 1024;

    /// Creates a new file transfer manager.
    pub fn new() -> Self {
        Self::with_config(FileTransferConfig::default())
    }

    /// Creates a new file transfer manager with custom configuration.
    ///
    /// `max_total_buffered_bytes` is clamped up to what a single
    /// `max_file_size` transfer charges (payload plus per-chunk overhead) —
    /// any lower value would make `max_file_size` unachievable.
    pub fn with_config(mut config: FileTransferConfig) -> Self {
        let min_budget = Self::min_viable_budget(&config);
        if config.max_total_buffered_bytes < min_budget {
            tracing::warn!(
                configured = config.max_total_buffered_bytes,
                clamped_to = min_budget,
                "max_total_buffered_bytes below what one max_file_size transfer charges; clamping"
            );
            config.max_total_buffered_bytes = min_budget;
        }
        Self {
            config,
            active_assemblies: HashMap::new(),
            failed_transfers: HashMap::new(),
            failed_transfer_order: VecDeque::new(),
            tombstone_hasher: RandomState::new(),
        }
    }

    /// Keyed hash under which a `file_id` is tombstoned. Hashing bounds the
    /// tombstone set's memory regardless of how long a peer makes its ids.
    fn tombstone_key(&self, file_id: &str) -> u64 {
        self.tombstone_hasher.hash_one(file_id)
    }

    /// Marks a transfer as failed so its remaining in-flight chunks are
    /// dropped as [`ChunkRejection::PreviouslyFailed`] instead of
    /// re-creating assembly state or re-notifying the application.
    fn tombstone(&mut self, file_id: &str) {
        let key = self.tombstone_key(file_id);
        if self.failed_transfers.insert(key, Instant::now()).is_none() {
            self.failed_transfer_order.push_back(key);
            while self.failed_transfers.len() > Self::TOMBSTONE_CAPACITY {
                match self.failed_transfer_order.pop_front() {
                    Some(oldest) => {
                        self.failed_transfers.remove(&oldest);
                    }
                    None => break,
                }
            }
        }
    }

    /// Whether `file_id` belongs to a failed transfer. A hit refreshes the
    /// tombstone's timestamp, so it outlives the transfer's chunk stream
    /// and expires only once chunks stop arriving for the stale timeout.
    fn is_tombstoned(&mut self, file_id: &str) -> bool {
        let key = self.tombstone_key(file_id);
        match self.failed_transfers.get_mut(&key) {
            Some(last_seen) => {
                *last_seen = Instant::now();
                true
            }
            None => false,
        }
    }

    /// Upper bound on a sender's `total_chunks` claim, derived from
    /// `max_file_size`. Floor division plus one — always at least the exact
    /// ceiling — without u64::div_ceil (MSRV) or overflow.
    fn derived_total_chunks_cap(max_file_size: u64) -> u64 {
        (max_file_size / Self::MIN_ACCEPTED_CHUNK_PAYLOAD)
            .saturating_add(1)
            .max(Self::MIN_TOTAL_CHUNKS_CAP)
    }

    /// The smallest budget that still admits one maximum-size transfer:
    /// its payload plus the per-chunk overhead of the most chunks such a
    /// transfer may legally claim (bounded by both the derived cap and the
    /// one-byte-per-chunk minimum).
    fn min_viable_budget(config: &FileTransferConfig) -> u64 {
        let max_chunks =
            Self::derived_total_chunks_cap(config.max_file_size).min(config.max_file_size);
        config
            .max_file_size
            .saturating_add(max_chunks.saturating_mul(Self::PER_CHUNK_OVERHEAD))
    }

    /// Chunks a file for sending.
    ///
    /// # Arguments
    ///
    /// * `file_id` - Unique identifier for this file transfer
    /// * `file_name` - Name of the file
    /// * `file_data` - Complete file data
    /// * `chunk_size_override` - If `Some`, uses this chunk size instead of the configured default.
    ///   Allows callers to select a transport-appropriate chunk size.
    ///
    /// # Returns
    ///
    /// Returns a vector of FileChunk ready to send. Fails if the file is
    /// empty or exceeds `max_file_size`, if the chunk size is zero, or if
    /// the chunking is so fine that the chunk count would exceed the
    /// receive-side `total_chunks` cap — [`Self::process_chunk`] on a
    /// receiver with the same `max_file_size` would silently drop every
    /// chunk of such a transfer.
    pub fn chunk_file(
        &self,
        file_id: String,
        file_name: String,
        file_data: Vec<u8>,
        chunk_size_override: Option<usize>,
    ) -> crate::Result<Vec<FileChunk>> {
        let file_size = file_data.len() as u64;

        if file_size > self.config.max_file_size {
            return Err(crate::Error::InvalidArgument(format!(
                "File size {} exceeds maximum {}",
                file_size, self.config.max_file_size
            )));
        }

        if file_data.is_empty() {
            return Err(crate::Error::InvalidArgument("File is empty".to_string()));
        }

        let chunk_size = chunk_size_override.unwrap_or(self.config.chunk_size);
        if chunk_size == 0 {
            return Err(crate::Error::InvalidArgument(
                "Chunk size must be greater than zero".to_string(),
            ));
        }

        // Mirror the receive-side cap: process_chunk rejects total_chunks
        // above this, so a finer chunking would have every chunk silently
        // dropped by any receiver with the same max_file_size.
        let total_chunks = file_size.div_ceil(chunk_size as u64);
        let max_total_chunks = Self::derived_total_chunks_cap(self.config.max_file_size);
        if total_chunks > max_total_chunks {
            return Err(crate::Error::InvalidArgument(format!(
                "Chunk size {} splits {} bytes into {} chunks, exceeding the receive-side cap of {}; use a larger chunk size",
                chunk_size, file_size, total_chunks, max_total_chunks
            )));
        }
        let total_chunks = total_chunks as u32;

        let file_checksum = format!("{:x}", Sha256::digest(&file_data));

        let mut chunks = Vec::new();

        for chunk_index in 0..total_chunks {
            let start = (chunk_index as usize) * chunk_size;
            let end = ((chunk_index as usize + 1) * chunk_size).min(file_data.len());

            let chunk = FileChunk {
                file_id: file_id.clone(),
                file_name: file_name.clone(),
                file_size,
                total_chunks,
                chunk_index,
                chunk_data: file_data[start..end].to_vec(),
                file_checksum: file_checksum.clone(),
            };

            chunks.push(chunk);
        }

        Ok(chunks)
    }

    /// Processes a received file chunk from `sender`.
    ///
    /// All wire-supplied fields (`file_size`, `total_chunks`, `chunk_data`,
    /// `file_id`) are bounded here before any assembly state is created, so
    /// a remote peer cannot force oversized allocations or unbounded
    /// bookkeeping. Assemblies are bound to the sender that started them,
    /// counted against global and per-sender caps, and the bytes buffered
    /// across all assemblies never exceed `max_total_buffered_bytes`.
    ///
    /// # Arguments
    ///
    /// * `sender` - The authenticated (or wire-claimed) sender of the chunk
    /// * `chunk` - The received file chunk
    ///
    /// # Returns
    ///
    /// Returns `Ok(FileProgress)` with current progress, or the
    /// [`ChunkRejection`] explaining why the chunk was dropped.
    pub fn process_chunk(
        &mut self,
        sender: &str,
        chunk: FileChunk,
    ) -> Result<FileProgress, ChunkRejection> {
        if chunk.total_chunks == 0 || chunk.chunk_index >= chunk.total_chunks {
            return Err(ChunkRejection::Invalid);
        }

        if chunk.file_size == 0 || chunk.file_size > self.config.max_file_size {
            tracing::warn!(
                file_id = %chunk.file_id,
                file_size = chunk.file_size,
                max_file_size = self.config.max_file_size,
                "Rejecting file chunk: claimed file_size out of bounds"
            );
            return Err(ChunkRejection::Invalid);
        }

        let max_total_chunks = Self::derived_total_chunks_cap(self.config.max_file_size);
        if chunk.total_chunks as u64 > max_total_chunks
            || chunk.total_chunks as u64 > chunk.file_size
        {
            tracing::warn!(
                file_id = %chunk.file_id,
                total_chunks = chunk.total_chunks,
                file_size = chunk.file_size,
                max_total_chunks,
                "Rejecting file chunk: claimed total_chunks out of bounds"
            );
            return Err(ChunkRejection::Invalid);
        }

        if chunk.chunk_data.is_empty() || chunk.chunk_data.len() as u64 > chunk.file_size {
            tracing::warn!(
                file_id = %chunk.file_id,
                chunk_len = chunk.chunk_data.len(),
                file_size = chunk.file_size,
                "Rejecting file chunk: chunk data length inconsistent with claimed file_size"
            );
            return Err(ChunkRejection::Invalid);
        }

        // A failed transfer's chunks were already ACKed and keep streaming
        // in; drop them without state or (further) events. Logged at debug
        // — a large drained transfer produces thousands of these.
        if self.is_tombstoned(&chunk.file_id) {
            tracing::debug!(
                file_id = %chunk.file_id,
                "Dropping chunk of a previously failed transfer"
            );
            return Err(ChunkRejection::PreviouslyFailed);
        }

        let file_id = chunk.file_id.clone();

        // A chunk for an existing assembly must be consistent with it; a
        // chunk starting a new assembly must fit within the count caps.
        // Everything is checked before any state is created or mutated.
        let replaced_charge = match self.active_assemblies.get(&file_id) {
            Some(assembly) => {
                if assembly.sender != sender {
                    tracing::warn!(
                        file_id = %file_id,
                        sender = %sender,
                        "Rejecting file chunk: sender does not match the assembly's sender"
                    );
                    return Err(ChunkRejection::SenderMismatch);
                }
                if assembly.total_chunks != chunk.total_chunks
                    || assembly.file_size != chunk.file_size
                    || assembly.file_checksum != chunk.file_checksum
                {
                    tracing::warn!(
                        file_id = %file_id,
                        "Rejecting file chunk: metadata does not match the existing assembly"
                    );
                    return Err(ChunkRejection::MetadataMismatch);
                }
                // Duplicates replace their earlier copy, so discount it
                // before checking the cumulative received bytes against the
                // claimed size.
                let replaced = assembly
                    .received_chunks
                    .get(&chunk.chunk_index)
                    .map(|c| c.len() as u64);
                if assembly.received_bytes - replaced.unwrap_or(0) + chunk.chunk_data.len() as u64
                    > assembly.file_size
                {
                    tracing::warn!(
                        file_id = %file_id,
                        received_bytes = assembly.received_bytes,
                        chunk_len = chunk.chunk_data.len(),
                        file_size = assembly.file_size,
                        "Rejecting file chunk: received bytes exceed claimed file_size"
                    );
                    return Err(ChunkRejection::Invalid);
                }
                // A replaced duplicate refunds its full charge — payload and
                // overhead — since its map entry is reused, not added.
                replaced.map_or(0, |len| len + Self::PER_CHUNK_OVERHEAD)
            }
            None => {
                if self.active_assemblies.len() >= self.config.max_concurrent_assemblies {
                    tracing::warn!(
                        file_id = %file_id,
                        active = self.active_assemblies.len(),
                        max = self.config.max_concurrent_assemblies,
                        "Rejecting file chunk: too many concurrent inbound transfers"
                    );
                    // The rejected chunk was already ACKed and is lost for
                    // good, so the whole transfer is unrecoverable —
                    // tombstone it so its remaining chunks drop silently.
                    self.tombstone(&file_id);
                    return Err(ChunkRejection::TooManyTransfers);
                }
                let sender_active = self
                    .active_assemblies
                    .values()
                    .filter(|a| a.sender == sender)
                    .count();
                if sender_active >= self.config.max_assemblies_per_sender {
                    tracing::warn!(
                        file_id = %file_id,
                        sender = %sender,
                        sender_active,
                        max = self.config.max_assemblies_per_sender,
                        "Rejecting file chunk: sender's concurrent-transfer quota reached"
                    );
                    self.tombstone(&file_id);
                    return Err(ChunkRejection::SenderQuotaExceeded);
                }
                0
            }
        };

        // Hard memory bound: total bytes charged across every assembly,
        // where each stored chunk costs its payload plus PER_CHUNK_OVERHEAD.
        // Iterating is fine — the count caps above keep this map small.
        let buffered: u64 = self
            .active_assemblies
            .values()
            .map(FileAssembly::charged_bytes)
            .sum();
        if buffered - replaced_charge + chunk.chunk_data.len() as u64 + Self::PER_CHUNK_OVERHEAD
            > self.config.max_total_buffered_bytes
        {
            tracing::warn!(
                file_id = %file_id,
                buffered,
                chunk_len = chunk.chunk_data.len(),
                budget = self.config.max_total_buffered_bytes,
                "Rejecting file chunk: buffered-bytes budget exhausted, dropping transfer"
            );
            // The dropped chunk is never retransmitted, so this transfer can
            // no longer complete — free its partial buffer now instead of
            // letting it squat the budget until the stale sweep, and
            // tombstone the id so later chunks cannot resurrect it as a
            // never-completable assembly.
            self.active_assemblies.remove(&file_id);
            self.tombstone(&file_id);
            return Err(ChunkRejection::BufferBudgetExhausted);
        }

        // Get or create assembly for this file
        let assembly = self
            .active_assemblies
            .entry(file_id.clone())
            .or_insert_with(|| FileAssembly::new(sender, &chunk));

        // Add chunk
        assembly.add_chunk(chunk.chunk_index, chunk.chunk_data);

        // Get progress
        let mut progress = assembly.progress();
        progress.file_id = file_id;

        Ok(progress)
    }

    /// Checks if a file transfer is complete.
    pub fn is_complete(&self, file_id: &str) -> bool {
        self.active_assemblies
            .get(file_id)
            .map(|assembly| assembly.is_complete())
            .unwrap_or(false)
    }

    /// Finalizes a file transfer and returns the complete file data.
    ///
    /// Verifies the SHA256 checksum of the reassembled file before returning.
    ///
    /// # Arguments
    ///
    /// * `file_id` - File identifier
    ///
    /// # Returns
    ///
    /// Returns `Some(Vec<u8>)` if file is complete, its size matches the
    /// claimed `file_size`, and the checksum matches, `None` otherwise.
    pub fn finalize_file(&mut self, file_id: &str) -> Option<Vec<u8>> {
        let assembly = self.active_assemblies.get(file_id)?;
        let file_data = assembly.reassemble()?;

        // A completed transfer must deliver exactly the bytes it claimed.
        if file_data.len() as u64 != assembly.file_size {
            tracing::warn!(
                file_id = %file_id,
                claimed = assembly.file_size,
                actual = file_data.len(),
                "File size mismatch — corrupted or tampered transfer"
            );
            self.active_assemblies.remove(file_id);
            self.tombstone(file_id);
            return None;
        }

        // Verify checksum before returning
        let actual_checksum = format!("{:x}", Sha256::digest(&file_data));
        if actual_checksum != assembly.file_checksum {
            tracing::warn!(
                file_id = %file_id,
                expected = %assembly.file_checksum,
                actual = %actual_checksum,
                "File checksum mismatch — corrupted or tampered transfer"
            );
            self.active_assemblies.remove(file_id);
            self.tombstone(file_id);
            return None;
        }

        self.active_assemblies.remove(file_id);
        Some(file_data)
    }

    /// Removes stale/incomplete transfers that have not received any chunk
    /// updates within `max_age`, returning what was dropped so callers can
    /// surface the loss. Swept ids are tombstoned so straggler chunks
    /// cannot resurrect them; tombstones themselves expire by the same
    /// rule — no chunks for `max_age` — freeing the id for reuse.
    pub fn cleanup_stale_transfers(&mut self, max_age: Duration) -> Vec<StaleTransfer> {
        let now = Instant::now();

        self.failed_transfers
            .retain(|_, last_seen| now.duration_since(*last_seen) <= max_age);
        let failed_transfers = &self.failed_transfers;
        self.failed_transfer_order
            .retain(|key| failed_transfers.contains_key(key));

        let stale_file_ids: Vec<String> = self
            .active_assemblies
            .iter()
            .filter_map(|(file_id, assembly)| {
                if now.duration_since(assembly.last_updated_at) > max_age {
                    return Some(file_id.clone());
                }
                None
            })
            .collect();

        stale_file_ids
            .into_iter()
            .filter_map(|file_id| {
                let assembly = self.active_assemblies.remove(&file_id)?;
                self.tombstone(&file_id);
                Some(StaleTransfer {
                    file_id,
                    file_name: assembly.file_name,
                    sender: assembly.sender,
                })
            })
            .collect()
    }

    /// Gets the progress of an active file transfer.
    pub fn get_progress(&self, file_id: &str) -> Option<FileProgress> {
        self.active_assemblies.get(file_id).map(|assembly| {
            let mut progress = assembly.progress();
            progress.file_id = file_id.to_string();
            progress
        })
    }

    /// Cancels an active file transfer.
    pub fn cancel_transfer(&mut self, file_id: &str) -> bool {
        self.active_assemblies.remove(file_id).is_some()
    }

    /// Gets the number of active file transfers.
    pub fn active_transfer_count(&self) -> usize {
        self.active_assemblies.len()
    }

    /// Rewinds every active assembly's last-update time and every tombstone
    /// (test-only), so staleness paths can be exercised without sleeping.
    #[cfg(test)]
    pub(crate) fn backdate_transfers(&mut self, by: Duration) {
        // checked_sub instead of `-=`: Instant underflows (and panics) when
        // the monotonic clock's epoch is closer than `by` — a fresh CI VM.
        // Failing loudly beats an intermittent subtraction panic.
        let backdated = Instant::now()
            .checked_sub(by)
            .expect("backdate_transfers needs system uptime longer than the backdate duration");
        for assembly in self.active_assemblies.values_mut() {
            assembly.last_updated_at = backdated;
        }
        for last_seen in self.failed_transfers.values_mut() {
            *last_seen = backdated;
        }
    }
}

impl Default for FileTransferManager {
    fn default() -> Self {
        Self::new()
    }
}

/// Tracks the sliding-window state for a single outbound file transfer.
///
/// Instead of sending all chunks at once, this limits the number of in-flight
/// (unACKed) chunks to `max_in_flight`, reducing outbox pressure and providing
/// backpressure that adapts to the transport's throughput.
pub struct OutboundTransferState {
    chunks: Vec<FileChunk>,
    next_unsent: usize,
    in_flight: HashSet<u32>,
    acked: HashSet<u32>,
    max_in_flight: usize,
}

impl OutboundTransferState {
    /// Creates a new outbound transfer state with the given chunks and window size.
    pub fn new(chunks: Vec<FileChunk>, max_in_flight: usize) -> Self {
        Self {
            chunks,
            next_unsent: 0,
            in_flight: HashSet::new(),
            acked: HashSet::new(),
            max_in_flight,
        }
    }

    /// Returns the next batch of chunks that can be sent without exceeding the
    /// in-flight window. Returned chunks are marked as in-flight.
    pub fn next_chunks_to_send(&mut self) -> Vec<FileChunk> {
        let mut batch = Vec::new();
        while self.in_flight.len() < self.max_in_flight && self.next_unsent < self.chunks.len() {
            let chunk = self.chunks[self.next_unsent].clone();
            self.in_flight.insert(chunk.chunk_index);
            self.next_unsent += 1;
            batch.push(chunk);
        }
        batch
    }

    /// Records that a chunk was ACKed. Returns `true` if this was an in-flight
    /// chunk (i.e. the window has room for more).
    pub fn on_chunk_ack(&mut self, chunk_index: u32) -> bool {
        self.acked.insert(chunk_index);
        self.in_flight.remove(&chunk_index)
    }

    /// Records that a chunk failed terminally and should not be retried
    /// at the window level (the transfer will be aborted by the caller).
    pub fn on_chunk_failed(&mut self, chunk_index: u32) {
        self.in_flight.remove(&chunk_index);
    }

    /// Returns the total number of chunks in this transfer.
    pub fn total_chunks(&self) -> u32 {
        self.chunks.len() as u32
    }

    /// Returns the number of chunks that have been acknowledged.
    pub fn acked_count(&self) -> u32 {
        self.acked.len() as u32
    }

    /// Returns `true` when all chunks have been acknowledged.
    pub fn is_fully_acked(&self) -> bool {
        self.acked.len() == self.chunks.len()
    }

    /// Returns `true` when all chunks have been sent at least once
    /// (they may still be in flight awaiting ACK).
    pub fn all_sent(&self) -> bool {
        self.next_unsent >= self.chunks.len()
    }

    /// Returns `true` when the window has capacity for more chunks.
    pub fn has_capacity(&self) -> bool {
        self.in_flight.len() < self.max_in_flight && self.next_unsent < self.chunks.len()
    }
}

#[cfg(test)]
mod tests {
    use super::*;

    fn sample_chunk() -> FileChunk {
        FileChunk {
            file_id: "file1".to_string(),
            file_name: "test.txt".to_string(),
            file_size: 13,
            total_chunks: 1,
            chunk_index: 0,
            chunk_data: b"Hello, World!".to_vec(),
            file_checksum: "abc123".to_string(),
        }
    }

    #[test]
    fn test_from_bytes_truncated_payload_is_unexpected_eof() {
        let bytes = sample_chunk().to_bytes();
        // Truncate mid-header: the first u32 (file_id_len) can't be read.
        let err = FileChunk::from_bytes(&bytes[..2]).unwrap_err();
        assert!(matches!(
            err,
            ChunkDecodeError::UnexpectedEof { what: "u32" }
        ));
        // Truncate mid-header: both string fields parse but the file_size
        // u64 read hits EOF.
        let after_strings = 4 + "file1".len() + 4 + "test.txt".len();
        let err = FileChunk::from_bytes(&bytes[..after_strings + 4]).unwrap_err();
        assert!(matches!(
            err,
            ChunkDecodeError::UnexpectedEof { what: "u64" }
        ));
        // Truncate mid-body: length prefixes parse but the data falls short.
        let err = FileChunk::from_bytes(&bytes[..bytes.len() - 1]).unwrap_err();
        assert!(matches!(
            err,
            ChunkDecodeError::UnexpectedEof { what: "bytes" }
        ));
    }

    #[test]
    fn test_from_bytes_oversized_length_prefix_is_field_too_long() {
        let mut bytes = sample_chunk().to_bytes();
        // Claim a file_id longer than the wire-format cap.
        let huge = (FileChunk::MAX_STRING_FIELD_LEN as u32 + 1).to_le_bytes();
        bytes[..4].copy_from_slice(&huge);
        let err = FileChunk::from_bytes(&bytes).unwrap_err();
        assert!(matches!(
            err,
            ChunkDecodeError::FieldTooLong {
                field: "file_id_len",
                ..
            }
        ));
    }

    #[test]
    fn test_from_bytes_invalid_utf8_names_the_field() {
        let mut bytes = sample_chunk().to_bytes();
        // file_id content starts right after its 4-byte length prefix.
        bytes[4] = 0xFF;
        let err = FileChunk::from_bytes(&bytes).unwrap_err();
        assert!(matches!(
            err,
            ChunkDecodeError::InvalidUtf8 {
                field: "file_id",
                ..
            }
        ));
    }

    #[test]
    fn test_chunk_small_file() {
        let manager = FileTransferManager::new();
        let file_data = b"Hello, World!".to_vec();

        let chunks = manager
            .chunk_file(
                "file1".to_string(),
                "test.txt".to_string(),
                file_data.clone(),
                None,
            )
            .unwrap();

        assert_eq!(chunks.len(), 1); // Small file = 1 chunk
        assert_eq!(chunks[0].chunk_index, 0);
        assert_eq!(chunks[0].total_chunks, 1);
        assert_eq!(chunks[0].file_size, file_data.len() as u64);
        assert_eq!(chunks[0].chunk_data, file_data);
    }

    #[test]
    fn test_chunk_large_file() {
        let config = FileTransferConfig {
            chunk_size: 100, // Small chunk for testing
            max_file_size: 1024 * 1024,
            ..FileTransferConfig::default()
        };
        let manager = FileTransferManager::with_config(config);

        let file_data = vec![0u8; 350]; // 350 bytes

        let chunks = manager
            .chunk_file("file1".to_string(), "test.bin".to_string(), file_data, None)
            .unwrap();

        assert_eq!(chunks.len(), 4); // 350 bytes / 100 = 4 chunks
        assert_eq!(chunks[0].chunk_data.len(), 100);
        assert_eq!(chunks[1].chunk_data.len(), 100);
        assert_eq!(chunks[2].chunk_data.len(), 100);
        assert_eq!(chunks[3].chunk_data.len(), 50);
    }

    #[test]
    fn test_file_too_large() {
        let config = FileTransferConfig {
            chunk_size: 1024,
            max_file_size: 1000,
            ..FileTransferConfig::default()
        };
        let manager = FileTransferManager::with_config(config);

        let file_data = vec![0u8; 2000]; // Exceeds max

        let result = manager.chunk_file(
            "file1".to_string(),
            "large.bin".to_string(),
            file_data,
            None,
        );
        assert!(result.is_err());
    }

    #[test]
    fn test_empty_file() {
        let manager = FileTransferManager::new();
        let result = manager.chunk_file("file1".to_string(), "empty.txt".to_string(), vec![], None);
        assert!(result.is_err());
    }

    #[test]
    fn test_zero_chunk_size_override_rejected() {
        let manager = FileTransferManager::new();
        let result = manager.chunk_file(
            "file1".to_string(),
            "test.txt".to_string(),
            b"hello".to_vec(),
            Some(0),
        );
        assert!(result.is_err());
    }

    #[test]
    fn test_reassemble_file() {
        let config = FileTransferConfig {
            chunk_size: 10,
            max_file_size: 1024,
            ..FileTransferConfig::default()
        };
        let mut manager = FileTransferManager::with_config(config);

        let original_data = b"Hello, World!".to_vec();
        let chunks = manager
            .chunk_file(
                "file1".to_string(),
                "test.txt".to_string(),
                original_data.clone(),
                None,
            )
            .unwrap();

        // Process all chunks
        for chunk in chunks {
            manager.process_chunk("peer", chunk).unwrap();
        }

        assert!(manager.is_complete("file1"));

        let reassembled = manager.finalize_file("file1").unwrap();
        assert_eq!(reassembled, original_data);
    }

    #[test]
    fn test_reassemble_out_of_order() {
        let config = FileTransferConfig {
            chunk_size: 10,
            max_file_size: 1024,
            ..FileTransferConfig::default()
        };
        let mut manager = FileTransferManager::with_config(config);

        let original_data = b"ABCDEFGHIJKLMNOPQRSTUVWXYZ".to_vec();
        let mut chunks = manager
            .chunk_file(
                "file1".to_string(),
                "alphabet.txt".to_string(),
                original_data.clone(),
                None,
            )
            .unwrap();

        // Reverse order
        chunks.reverse();

        // Process all chunks
        for chunk in chunks {
            manager.process_chunk("peer", chunk).unwrap();
        }

        assert!(manager.is_complete("file1"));

        let reassembled = manager.finalize_file("file1").unwrap();
        assert_eq!(reassembled, original_data);
    }

    #[test]
    fn test_progress_tracking() {
        let config = FileTransferConfig {
            chunk_size: 100,
            max_file_size: 1024,
            ..FileTransferConfig::default()
        };
        let mut manager = FileTransferManager::with_config(config);

        let file_data = vec![0u8; 250]; // 3 chunks
        let chunks = manager
            .chunk_file("file1".to_string(), "test.bin".to_string(), file_data, None)
            .unwrap();

        assert_eq!(chunks.len(), 3);

        // Process first chunk
        let progress = manager.process_chunk("peer", chunks[0].clone()).unwrap();
        assert_eq!(progress.chunks_completed, 1);
        assert_eq!(progress.total_chunks, 3);
        assert_eq!(progress.percentage, 33); // 1/3 ≈ 33%

        // Process second chunk
        let progress = manager.process_chunk("peer", chunks[1].clone()).unwrap();
        assert_eq!(progress.chunks_completed, 2);
        assert_eq!(progress.percentage, 66); // 2/3 ≈ 66%

        // Process third chunk
        let progress = manager.process_chunk("peer", chunks[2].clone()).unwrap();
        assert_eq!(progress.chunks_completed, 3);
        assert_eq!(progress.percentage, 100); // 3/3 = 100%

        assert!(manager.is_complete("file1"));
    }

    #[test]
    fn test_duplicate_chunk() {
        let mut manager = FileTransferManager::new();

        let file_data = b"Test data".to_vec();
        let chunks = manager
            .chunk_file("file1".to_string(), "test.txt".to_string(), file_data, None)
            .unwrap();

        // Process same chunk twice
        manager.process_chunk("peer", chunks[0].clone()).unwrap();
        manager.process_chunk("peer", chunks[0].clone()).unwrap();

        // Should still show only 1 chunk
        let progress = manager.get_progress("file1").unwrap();
        assert_eq!(progress.chunks_completed, 1);
    }

    #[test]
    fn test_multiple_files() {
        let config = FileTransferConfig {
            chunk_size: 10,
            max_file_size: 1024,
            ..FileTransferConfig::default()
        };
        let mut manager = FileTransferManager::with_config(config);

        let data1 = b"File 1 data".to_vec();
        let data2 = b"File 2 data".to_vec();

        let chunks1 = manager
            .chunk_file(
                "file1".to_string(),
                "file1.txt".to_string(),
                data1.clone(),
                None,
            )
            .unwrap();
        let chunks2 = manager
            .chunk_file(
                "file2".to_string(),
                "file2.txt".to_string(),
                data2.clone(),
                None,
            )
            .unwrap();

        // Process both files
        for chunk in chunks1 {
            manager.process_chunk("peer", chunk).unwrap();
        }
        for chunk in chunks2 {
            manager.process_chunk("peer", chunk).unwrap();
        }

        assert_eq!(manager.active_transfer_count(), 2);
        assert!(manager.is_complete("file1"));
        assert!(manager.is_complete("file2"));
    }

    #[test]
    fn test_cancel_transfer() {
        let mut manager = FileTransferManager::new();

        let file_data = b"Test data".to_vec();
        let chunks = manager
            .chunk_file("file1".to_string(), "test.txt".to_string(), file_data, None)
            .unwrap();

        manager.process_chunk("peer", chunks[0].clone()).unwrap();
        assert_eq!(manager.active_transfer_count(), 1);

        assert!(manager.cancel_transfer("file1"));
        assert_eq!(manager.active_transfer_count(), 0);
        assert!(!manager.is_complete("file1"));
    }

    #[test]
    fn test_get_progress() {
        let mut manager = FileTransferManager::new();

        let file_data = b"Test data".to_vec();
        let chunks = manager
            .chunk_file("file1".to_string(), "test.txt".to_string(), file_data, None)
            .unwrap();

        manager.process_chunk("peer", chunks[0].clone()).unwrap();

        let progress = manager.get_progress("file1").unwrap();
        assert_eq!(progress.file_id, "file1");
        assert_eq!(progress.file_name, "test.txt");
        assert!(progress.percentage > 0);
    }

    #[test]
    fn test_progress_nonexistent_file() {
        let manager = FileTransferManager::new();
        assert!(manager.get_progress("nonexistent").is_none());
    }

    #[test]
    fn test_calculate_percentage() {
        assert_eq!(FileProgress::calculate_percentage(0, 10), 0);
        assert_eq!(FileProgress::calculate_percentage(5, 10), 50);
        assert_eq!(FileProgress::calculate_percentage(10, 10), 100);
        assert_eq!(FileProgress::calculate_percentage(1, 3), 33);
    }

    #[test]
    fn test_invalid_chunk_index_rejected() {
        let mut manager = FileTransferManager::new();
        let chunks = manager
            .chunk_file(
                "file1".to_string(),
                "test.txt".to_string(),
                b"hello world".to_vec(),
                None,
            )
            .unwrap();

        let mut invalid_chunk = chunks[0].clone();
        invalid_chunk.chunk_index = invalid_chunk.total_chunks;

        assert!(manager.process_chunk("peer", invalid_chunk).is_err());
        assert!(manager.get_progress("file1").is_none());
    }

    fn attack_chunk(
        file_id: &str,
        file_size: u64,
        total_chunks: u32,
        chunk_index: u32,
        data: Vec<u8>,
    ) -> FileChunk {
        FileChunk {
            file_id: file_id.to_string(),
            file_name: "attack.bin".to_string(),
            file_size,
            total_chunks,
            chunk_index,
            chunk_data: data,
            file_checksum: "0000".to_string(),
        }
    }

    #[test]
    fn test_huge_file_size_claim_rejected() {
        // SEC-H2 regression: a single chunk claiming u64::MAX bytes used to
        // reach reassemble() and panic on Vec::with_capacity.
        let mut manager = FileTransferManager::new();
        let chunk = attack_chunk("evil", u64::MAX, 1, 0, vec![0u8; 16]);
        assert!(manager.process_chunk("peer", chunk).is_err());
        assert_eq!(manager.active_transfer_count(), 0);
        assert!(!manager.is_complete("evil"));
        assert!(manager.finalize_file("evil").is_none());
    }

    #[test]
    fn test_file_size_over_configured_max_rejected() {
        let config = FileTransferConfig {
            chunk_size: 1024,
            max_file_size: 1000,
            ..FileTransferConfig::default()
        };
        let mut manager = FileTransferManager::with_config(config);
        let chunk = attack_chunk("f", 2000, 2, 0, vec![0u8; 100]);
        assert!(manager.process_chunk("peer", chunk).is_err());
        assert_eq!(manager.active_transfer_count(), 0);
    }

    #[test]
    fn test_zero_file_size_rejected() {
        let mut manager = FileTransferManager::new();
        let chunk = attack_chunk("f", 0, 1, 0, vec![0u8; 8]);
        assert!(manager.process_chunk("peer", chunk).is_err());
    }

    #[test]
    fn test_total_chunks_exceeding_file_size_rejected() {
        // More chunks than bytes is inherently bogus (chunks are non-empty).
        let mut manager = FileTransferManager::new();
        let chunk = attack_chunk("f", 10_000, 20_000, 0, vec![0u8; 8]);
        assert!(manager.process_chunk("peer", chunk).is_err());
    }

    #[test]
    fn test_total_chunks_exceeding_derived_cap_rejected() {
        // Default config: 100 MB / 1 KiB payload floor ≈ 102_400 max chunks.
        let mut manager = FileTransferManager::new();
        let chunk = attack_chunk("f", 100 * 1024 * 1024, 200_000, 0, vec![0u8; 8]);
        assert!(manager.process_chunk("peer", chunk).is_err());
    }

    #[test]
    fn test_empty_chunk_data_rejected() {
        let mut manager = FileTransferManager::new();
        let chunk = attack_chunk("f", 100, 2, 0, vec![]);
        assert!(manager.process_chunk("peer", chunk).is_err());
    }

    #[test]
    fn test_chunk_data_larger_than_file_size_rejected() {
        let mut manager = FileTransferManager::new();
        let chunk = attack_chunk("f", 10, 1, 0, vec![0u8; 64]);
        assert!(manager.process_chunk("peer", chunk).is_err());
    }

    #[test]
    fn test_cumulative_bytes_exceeding_claim_rejected() {
        let mut manager = FileTransferManager::new();
        // Claim 2048 bytes in 2 chunks, then send two 1500-byte chunks.
        let first = attack_chunk("f", 2048, 2, 0, vec![0u8; 1500]);
        assert!(manager.process_chunk("peer", first).is_ok());
        let second = attack_chunk("f", 2048, 2, 1, vec![0u8; 1500]);
        assert!(manager.process_chunk("peer", second).is_err());
        // The first chunk's state survives; only the offending chunk drops.
        let progress = manager.get_progress("f").unwrap();
        assert_eq!(progress.chunks_completed, 1);
    }

    #[test]
    fn test_duplicate_chunk_does_not_double_count_bytes() {
        let mut manager = FileTransferManager::new();
        // 1500 + 548 = 2048 claimed bytes; resending chunk 0 must replace
        // (not add), so the transfer still completes.
        let data0 = vec![7u8; 1500];
        let data1 = vec![9u8; 548];
        let mut whole = data0.clone();
        whole.extend_from_slice(&data1);
        let checksum = format!("{:x}", Sha256::digest(&whole));

        let make = |index: u32, data: Vec<u8>| FileChunk {
            file_id: "f".to_string(),
            file_name: "file.bin".to_string(),
            file_size: 2048,
            total_chunks: 2,
            chunk_index: index,
            chunk_data: data,
            file_checksum: checksum.clone(),
        };

        assert!(manager
            .process_chunk("peer", make(0, data0.clone()))
            .is_ok());
        assert!(manager.process_chunk("peer", make(0, data0)).is_ok());
        assert!(manager.process_chunk("peer", make(1, data1)).is_ok());
        assert!(manager.is_complete("f"));
        assert_eq!(manager.finalize_file("f").unwrap(), whole);
    }

    #[test]
    fn test_concurrent_assembly_cap_enforced() {
        let config = FileTransferConfig {
            max_concurrent_assemblies: 2,
            ..FileTransferConfig::default()
        };
        let mut manager = FileTransferManager::with_config(config);

        assert!(manager
            .process_chunk("peer", attack_chunk("f1", 100, 2, 0, vec![0u8; 10]))
            .is_ok());
        assert!(manager
            .process_chunk("peer", attack_chunk("f2", 100, 2, 0, vec![0u8; 10]))
            .is_ok());
        // Third simultaneous transfer is rejected...
        assert_eq!(
            manager
                .process_chunk("peer", attack_chunk("f3", 100, 2, 0, vec![0u8; 10]))
                .unwrap_err(),
            ChunkRejection::TooManyTransfers
        );
        // ...but chunks for existing assemblies still flow.
        assert!(manager
            .process_chunk("peer", attack_chunk("f1", 100, 2, 1, vec![0u8; 10]))
            .is_ok());
        // Freeing a slot re-admits new transfers — but not the failed id:
        // f3's rejected chunk was ACKed and lost, so the transfer could
        // never complete. A retry must use a fresh file id.
        assert!(manager.cancel_transfer("f2"));
        assert_eq!(
            manager
                .process_chunk("peer", attack_chunk("f3", 100, 2, 0, vec![0u8; 10]))
                .unwrap_err(),
            ChunkRejection::PreviouslyFailed
        );
        assert!(manager
            .process_chunk("peer", attack_chunk("f4", 100, 2, 0, vec![0u8; 10]))
            .is_ok());
    }

    #[test]
    fn test_sender_quota_enforced() {
        let config = FileTransferConfig {
            max_concurrent_assemblies: 4,
            max_assemblies_per_sender: 1,
            ..FileTransferConfig::default()
        };
        let mut manager = FileTransferManager::with_config(config);

        assert!(manager
            .process_chunk("alice", attack_chunk("f1", 100, 2, 0, vec![0u8; 10]))
            .is_ok());
        // A second transfer from the same sender exceeds the quota...
        assert_eq!(
            manager
                .process_chunk("alice", attack_chunk("f2", 100, 2, 0, vec![0u8; 10]))
                .unwrap_err(),
            ChunkRejection::SenderQuotaExceeded
        );
        // ...but other senders are unaffected.
        assert!(manager
            .process_chunk("bob", attack_chunk("f3", 100, 2, 0, vec![0u8; 10]))
            .is_ok());
    }

    #[test]
    fn test_sender_mismatch_rejected() {
        let mut manager = FileTransferManager::new();
        assert!(manager
            .process_chunk("alice", attack_chunk("f", 100, 2, 0, vec![0u8; 10]))
            .is_ok());
        // Same file_id and metadata from a different sender must not be able
        // to poison the assembly.
        assert_eq!(
            manager
                .process_chunk("mallory", attack_chunk("f", 100, 2, 1, vec![0u8; 10]))
                .unwrap_err(),
            ChunkRejection::SenderMismatch
        );
        // The original assembly is untouched.
        assert_eq!(manager.get_progress("f").unwrap().chunks_completed, 1);
    }

    #[test]
    fn test_buffer_budget_rejects_new_transfer() {
        // 1_065_536 is exactly the minimum viable budget for a 1 MB
        // max_file_size, so with_config leaves it unclamped.
        let config = FileTransferConfig {
            max_file_size: 1_000_000,
            max_total_buffered_bytes: 1_065_536,
            ..FileTransferConfig::default()
        };
        let mut manager = FileTransferManager::with_config(config);

        assert!(manager
            .process_chunk(
                "alice",
                attack_chunk("f1", 1_000_000, 2, 0, vec![0u8; 600_000])
            )
            .is_ok());
        // 600_064 + 500_064 charged would exceed the budget; the new
        // transfer is rejected before any of its state is created.
        assert_eq!(
            manager
                .process_chunk(
                    "bob",
                    attack_chunk("f2", 1_000_000, 2, 0, vec![0u8; 500_000])
                )
                .unwrap_err(),
            ChunkRejection::BufferBudgetExhausted
        );
        assert_eq!(manager.active_transfer_count(), 1);
        assert!(manager.get_progress("f2").is_none());
        // The pre-existing transfer is untouched.
        assert_eq!(manager.get_progress("f1").unwrap().chunks_completed, 1);
    }

    #[test]
    fn test_buffer_budget_drops_existing_assembly() {
        let config = FileTransferConfig {
            max_file_size: 1_000_000,
            max_total_buffered_bytes: 1_065_536,
            ..FileTransferConfig::default()
        };
        let mut manager = FileTransferManager::with_config(config);

        assert!(manager
            .process_chunk(
                "alice",
                attack_chunk("f1", 1_000_000, 3, 0, vec![0u8; 600_000])
            )
            .is_ok());
        assert!(manager
            .process_chunk("bob", attack_chunk("f2", 400_000, 2, 0, vec![0u8; 300_000]))
            .is_ok());
        // f1's next chunk busts the budget. The dropped chunk is never
        // retransmitted, so f1 can no longer complete — its partial buffer
        // is freed immediately rather than squatting the budget until the
        // stale sweep.
        assert_eq!(
            manager
                .process_chunk(
                    "alice",
                    attack_chunk("f1", 1_000_000, 3, 1, vec![0u8; 300_000])
                )
                .unwrap_err(),
            ChunkRejection::BufferBudgetExhausted
        );
        assert!(manager.get_progress("f1").is_none());
        assert_eq!(manager.active_transfer_count(), 1);
        // The freed budget re-admits other traffic.
        assert!(manager
            .process_chunk("bob", attack_chunk("f2", 400_000, 2, 1, vec![0u8; 100_000]))
            .is_ok());
    }

    #[test]
    fn test_budget_charges_per_chunk_overhead() {
        // A flood of 1-byte chunks must be stopped by its bookkeeping
        // charge, not its (negligible) payload sum. Budget 0 is clamped up
        // to the minimum viable value: 10_000 + 1024 * 64 = 75_536.
        let config = FileTransferConfig {
            max_file_size: 10_000,
            max_total_buffered_bytes: 0,
            ..FileTransferConfig::default()
        };
        let mut manager = FileTransferManager::with_config(config);

        // 1024 chunks is the derived cap for this config; f1 fills it.
        for i in 0..1024u32 {
            manager
                .process_chunk("alice", attack_chunk("f1", 10_000, 1024, i, vec![0u8; 1]))
                .unwrap();
        }

        // f2's identical flood must hit the budget long before its payload
        // (a few hundred bytes) comes anywhere near 75_536.
        let mut rejected = None;
        for i in 0..1024u32 {
            if let Err(e) =
                manager.process_chunk("bob", attack_chunk("f2", 10_000, 1024, i, vec![0u8; 1]))
            {
                rejected = Some((i, e));
                break;
            }
        }
        let (index, err) = rejected.expect("tiny-chunk flood must exhaust the budget");
        assert_eq!(err, ChunkRejection::BufferBudgetExhausted);
        let total_payload = 1024 + u64::from(index);
        assert!(
            total_payload < 2_000,
            "rejection must be overhead-driven, but {} payload bytes were buffered",
            total_payload
        );
        // The busting transfer is dropped with its chunk.
        assert!(manager.get_progress("f2").is_none());
    }

    #[test]
    fn test_manual_sender_cannot_be_a_wire_user_id() {
        // Sender binding for the manual FFI path relies on this sentinel
        // being unrepresentable as a wire UserId (':' is rejected), so no
        // remote peer can alias it.
        assert!(offline_protocol_core::UserId::new(FileTransferManager::MANUAL_SENDER).is_err());
    }

    #[test]
    fn test_resource_rejected_transfer_is_tombstoned() {
        // Once a transfer is refused for a resource reason, its remaining
        // in-flight chunks are dropped as previously_failed — no repeated
        // resource rejections (which would re-emit FileReceiveFailed
        // upstream) and no ghost assembly, even after capacity frees up.
        let config = FileTransferConfig {
            max_concurrent_assemblies: 1,
            ..FileTransferConfig::default()
        };
        let mut manager = FileTransferManager::with_config(config);

        assert!(manager
            .process_chunk("alice", attack_chunk("f1", 100, 2, 0, vec![0u8; 10]))
            .is_ok());
        assert_eq!(
            manager
                .process_chunk("bob", attack_chunk("f2", 1000, 10, 0, vec![0u8; 100]))
                .unwrap_err(),
            ChunkRejection::TooManyTransfers
        );
        for index in 1..10u32 {
            assert_eq!(
                manager
                    .process_chunk("bob", attack_chunk("f2", 1000, 10, index, vec![0u8; 100]))
                    .unwrap_err(),
                ChunkRejection::PreviouslyFailed
            );
        }
        // Even with the slot freed, the failed id stays dead: its first
        // chunk was ACKed and lost, so the transfer could never complete.
        assert!(manager.cancel_transfer("f1"));
        assert_eq!(
            manager
                .process_chunk("bob", attack_chunk("f2", 1000, 10, 5, vec![0u8; 100]))
                .unwrap_err(),
            ChunkRejection::PreviouslyFailed
        );
        assert_eq!(manager.active_transfer_count(), 0);
    }

    #[test]
    fn test_budget_dropped_transfer_cannot_resurrect() {
        let config = FileTransferConfig {
            max_file_size: 1_000_000,
            max_total_buffered_bytes: 1_065_536,
            ..FileTransferConfig::default()
        };
        let mut manager = FileTransferManager::with_config(config);

        assert!(manager
            .process_chunk(
                "alice",
                attack_chunk("f1", 1_000_000, 3, 0, vec![0u8; 600_000])
            )
            .is_ok());
        assert!(manager
            .process_chunk("bob", attack_chunk("f2", 400_000, 2, 0, vec![0u8; 300_000]))
            .is_ok());
        assert_eq!(
            manager
                .process_chunk(
                    "alice",
                    attack_chunk("f1", 1_000_000, 3, 1, vec![0u8; 300_000])
                )
                .unwrap_err(),
            ChunkRejection::BufferBudgetExhausted
        );
        // f1's remaining in-flight chunk must not start a fresh assembly —
        // it would miss the dropped chunk forever, squatting a slot and the
        // budget until the stale sweep and then failing a second time.
        assert_eq!(
            manager
                .process_chunk(
                    "alice",
                    attack_chunk("f1", 1_000_000, 3, 2, vec![0u8; 100_000])
                )
                .unwrap_err(),
            ChunkRejection::PreviouslyFailed
        );
        assert!(manager.get_progress("f1").is_none());
        assert_eq!(manager.active_transfer_count(), 1);
    }

    #[test]
    fn test_finalize_integrity_failure_tombstones_id() {
        let mut manager = FileTransferManager::new();

        // Checksum matches the bytes but the claimed file_size does not, so
        // finalize fails its size check and drops the transfer.
        let data = vec![3u8; 100];
        let checksum = format!("{:x}", Sha256::digest(&data));
        let chunk = FileChunk {
            file_id: "f".to_string(),
            file_name: "bad.bin".to_string(),
            file_size: 2048,
            total_chunks: 1,
            chunk_index: 0,
            chunk_data: data,
            file_checksum: checksum,
        };
        assert!(manager.process_chunk("peer", chunk.clone()).is_ok());
        assert!(manager.is_complete("f"));
        assert!(manager.finalize_file("f").is_none());

        // The failed id cannot be restarted by resending its chunks.
        assert_eq!(
            manager.process_chunk("peer", chunk).unwrap_err(),
            ChunkRejection::PreviouslyFailed
        );
        assert_eq!(manager.active_transfer_count(), 0);
    }

    #[test]
    fn test_stale_swept_transfer_is_tombstoned() {
        let mut manager = FileTransferManager::new();

        assert!(manager
            .process_chunk("peer", attack_chunk("f", 200, 2, 0, vec![0u8; 100]))
            .is_ok());
        manager.backdate_transfers(Duration::from_secs(2));
        let swept = manager.cleanup_stale_transfers(Duration::from_secs(1));
        assert_eq!(swept.len(), 1);

        // A straggler chunk must not resurrect the swept transfer — the
        // caller already emitted its stale_timeout failure.
        assert_eq!(
            manager
                .process_chunk("peer", attack_chunk("f", 200, 2, 1, vec![0u8; 100]))
                .unwrap_err(),
            ChunkRejection::PreviouslyFailed
        );
        assert_eq!(manager.active_transfer_count(), 0);
    }

    #[test]
    fn test_tombstone_expires_after_max_age() {
        let config = FileTransferConfig {
            max_concurrent_assemblies: 1,
            ..FileTransferConfig::default()
        };
        let mut manager = FileTransferManager::with_config(config);

        assert!(manager
            .process_chunk("alice", attack_chunk("f1", 100, 2, 0, vec![0u8; 10]))
            .is_ok());
        assert_eq!(
            manager
                .process_chunk("bob", attack_chunk("f2", 100, 2, 0, vec![0u8; 10]))
                .unwrap_err(),
            ChunkRejection::TooManyTransfers
        );
        assert!(manager.cancel_transfer("f1"));

        // Once no chunk for the failed id has been seen for max_age, the
        // stale sweep releases it and the id may be reused (the manual FFI
        // path retries with app-chosen ids).
        manager.backdate_transfers(Duration::from_secs(2));
        manager.cleanup_stale_transfers(Duration::from_secs(1));
        assert!(manager
            .process_chunk("bob", attack_chunk("f2", 100, 2, 0, vec![0u8; 10]))
            .is_ok());
    }

    #[test]
    fn test_cancel_does_not_tombstone() {
        // Cancellation is an app decision, not a failure — the id may be
        // restarted immediately (nothing was lost that a full resend
        // cannot supply).
        let mut manager = FileTransferManager::new();
        assert!(manager
            .process_chunk("peer", attack_chunk("f", 100, 2, 0, vec![0u8; 10]))
            .is_ok());
        assert!(manager.cancel_transfer("f"));
        assert!(manager
            .process_chunk("peer", attack_chunk("f", 100, 2, 0, vec![0u8; 10]))
            .is_ok());
        assert_eq!(manager.active_transfer_count(), 1);
    }

    #[test]
    fn test_duplicate_chunk_resent_with_different_size_replaces() {
        // A duplicate whose payload differs in size must fully replace the
        // earlier copy in both bytes and budget accounting, so the transfer
        // still completes and delivers exactly the claimed size.
        let mut manager = FileTransferManager::new();
        let data0 = vec![7u8; 1500];
        let data1 = vec![9u8; 548];
        let mut whole = data0.clone();
        whole.extend_from_slice(&data1);
        let checksum = format!("{:x}", Sha256::digest(&whole));

        let make = |index: u32, data: Vec<u8>| FileChunk {
            file_id: "f".to_string(),
            file_name: "file.bin".to_string(),
            file_size: 2048,
            total_chunks: 2,
            chunk_index: index,
            chunk_data: data,
            file_checksum: checksum.clone(),
        };

        // Undersized garbage first, then the real 1500-byte chunk 0.
        assert!(manager
            .process_chunk("peer", make(0, vec![0u8; 1400]))
            .is_ok());
        assert!(manager.process_chunk("peer", make(0, data0)).is_ok());
        assert!(manager.process_chunk("peer", make(1, data1)).is_ok());
        assert!(manager.is_complete("f"));
        // finalize checks reassembled length against the claimed file_size,
        // so this also proves the replacement byte accounting is exact.
        assert_eq!(manager.finalize_file("f").unwrap(), whole);
    }

    #[test]
    fn test_single_chunk_at_exactly_file_size_completes() {
        let mut manager = FileTransferManager::new();
        let data = vec![4u8; 512];
        let checksum = format!("{:x}", Sha256::digest(&data));
        let chunk = FileChunk {
            file_id: "f".to_string(),
            file_name: "exact.bin".to_string(),
            file_size: 512,
            total_chunks: 1,
            chunk_index: 0,
            chunk_data: data.clone(),
            file_checksum: checksum,
        };
        assert!(manager.process_chunk("peer", chunk).is_ok());
        assert!(manager.is_complete("f"));
        assert_eq!(manager.finalize_file("f").unwrap(), data);
    }

    #[test]
    fn test_file_at_exactly_max_file_size_completes() {
        // The configured budget equals max_file_size, which cannot cover
        // the per-chunk overhead — with_config clamps it up so a
        // maximum-size file still completes.
        let config = FileTransferConfig {
            chunk_size: 512,
            max_file_size: 1000,
            max_total_buffered_bytes: 1000,
            ..FileTransferConfig::default()
        };
        let mut manager = FileTransferManager::with_config(config);

        let file_data = vec![5u8; 1000];
        let chunks = manager
            .chunk_file(
                "f".to_string(),
                "max.bin".to_string(),
                file_data.clone(),
                None,
            )
            .unwrap();
        for chunk in chunks {
            manager.process_chunk("peer", chunk).unwrap();
        }
        assert_eq!(manager.finalize_file("f").unwrap(), file_data);
    }

    #[test]
    fn test_chunk_file_rejects_chunking_finer_than_receive_cap() {
        // A 1 MiB max_file_size derives a receive-side cap of 1025 chunks;
        // chunking a full-size file at 512 bytes would need 2048. Every
        // chunk of such a transfer would be ACKed then dropped by the
        // receiver, so the send side must refuse to produce it.
        let config = FileTransferConfig {
            chunk_size: 512,
            max_file_size: 1024 * 1024,
            ..FileTransferConfig::default()
        };
        let manager = FileTransferManager::with_config(config);
        let result = manager.chunk_file(
            "f".to_string(),
            "big.bin".to_string(),
            vec![0u8; 1024 * 1024],
            None,
        );
        assert!(result.is_err());
    }

    #[test]
    fn test_chunk_file_small_chunk_size_round_trips_within_cap() {
        // Small chunk sizes stay valid while the chunk count fits the
        // receive-side cap: 400 KiB at 512 bytes is 800 chunks (cap 1025),
        // and a same-config receiver accepts the whole transfer.
        let config = FileTransferConfig {
            chunk_size: 512,
            max_file_size: 1024 * 1024,
            ..FileTransferConfig::default()
        };
        let mut manager = FileTransferManager::with_config(config);
        let file_data: Vec<u8> = (0..400 * 1024).map(|i| (i % 251) as u8).collect();
        let chunks = manager
            .chunk_file(
                "f".to_string(),
                "ok.bin".to_string(),
                file_data.clone(),
                None,
            )
            .unwrap();
        assert_eq!(chunks.len(), 800);
        for chunk in chunks {
            manager.process_chunk("peer", chunk).unwrap();
        }
        assert_eq!(manager.finalize_file("f").unwrap(), file_data);
    }

    #[test]
    fn test_total_chunks_at_derived_cap_accepted() {
        // max_file_size 1 MiB → cap = 1 MiB / 1 KiB + 1 = 1025.
        let config = FileTransferConfig {
            max_file_size: 1024 * 1024,
            ..FileTransferConfig::default()
        };
        let mut manager = FileTransferManager::with_config(config);
        assert!(manager
            .process_chunk(
                "peer",
                attack_chunk("f1", 1024 * 1024, 1025, 0, vec![0u8; 8])
            )
            .is_ok());
        assert_eq!(
            manager
                .process_chunk(
                    "peer",
                    attack_chunk("f2", 1024 * 1024, 1026, 0, vec![0u8; 8])
                )
                .unwrap_err(),
            ChunkRejection::Invalid
        );
    }

    #[test]
    fn test_duplicate_chunk_replaces_data() {
        let mut manager = FileTransferManager::new();
        // A resent chunk 0 with different bytes replaces the first copy; the
        // final file must contain the replacement.
        let stale = vec![1u8; 100];
        let fresh = vec![2u8; 100];
        let tail = vec![3u8; 50];
        let mut whole = fresh.clone();
        whole.extend_from_slice(&tail);
        let checksum = format!("{:x}", Sha256::digest(&whole));

        let make = |index: u32, data: Vec<u8>| FileChunk {
            file_id: "f".to_string(),
            file_name: "file.bin".to_string(),
            file_size: 150,
            total_chunks: 2,
            chunk_index: index,
            chunk_data: data,
            file_checksum: checksum.clone(),
        };

        manager.process_chunk("peer", make(0, stale)).unwrap();
        manager.process_chunk("peer", make(0, fresh)).unwrap();
        manager.process_chunk("peer", make(1, tail)).unwrap();
        assert_eq!(manager.finalize_file("f").unwrap(), whole);
    }

    #[test]
    fn test_finalize_rejects_size_mismatch() {
        let mut manager = FileTransferManager::new();
        // Single 100-byte chunk with a valid checksum of those bytes, but a
        // claimed file_size of 2048.
        let data = vec![3u8; 100];
        let checksum = format!("{:x}", Sha256::digest(&data));
        let chunk = FileChunk {
            file_id: "f".to_string(),
            file_name: "file.bin".to_string(),
            file_size: 2048,
            total_chunks: 1,
            chunk_index: 0,
            chunk_data: data,
            file_checksum: checksum,
        };
        assert!(manager.process_chunk("peer", chunk).is_ok());
        assert!(manager.is_complete("f"));
        assert!(manager.finalize_file("f").is_none());
        // The failed transfer is discarded.
        assert_eq!(manager.active_transfer_count(), 0);
    }

    #[test]
    fn test_cleanup_stale_transfers() {
        let mut manager = FileTransferManager::new();
        let chunks = manager
            .chunk_file(
                "file1".to_string(),
                "test.txt".to_string(),
                vec![1u8; 64 * 1024],
                None,
            )
            .unwrap();

        manager.process_chunk("peer", chunks[0].clone()).unwrap();
        std::thread::sleep(Duration::from_millis(3));

        let removed = manager.cleanup_stale_transfers(Duration::from_millis(1));
        assert_eq!(
            removed,
            vec![StaleTransfer {
                file_id: "file1".to_string(),
                file_name: "test.txt".to_string(),
                sender: "peer".to_string(),
            }]
        );
        assert!(manager.get_progress("file1").is_none());
    }
}