objectiveai-api 2.2.11

//! Transport selection + WebSocket transport helpers for the streaming endpoints.
//!
//! Each streaming endpoint (`/agent/completions`, `/vector/completions`,
//! etc.) lives behind a single `axum::routing::any(...)` route. The
//! handler inspects the request via the [`Transport`] extractor and
//! forks based on whether the client is actually upgrading to WS:
//!
//! - `Upgrade: websocket` header present → GET + WS handshake,
//!   response is a WebSocket text-frame stream (the `_ws` handler).
//! - Anything else (POST + JSON body, with or without `stream: true`)
//!   → the existing SSE handler. That handler returns `text/event-stream`
//!   when `body.stream` is true and a unary `application/json` when
//!   it's false — same dispatch the endpoint had before WS landed.
//!
//! WS wire protocol after the upgrade:
//!
//! - Client → server: one text frame with the JSON request body
//!   (`*CreateParams`), exactly the same shape the SSE branch
//!   deserializes from the POST body.
//! - Server → client: N text frames, one chunk per frame, JSON
//!   encoded — same `*Chunk` types each endpoint already emits.
//! - End of stream: the FINAL chunk is withheld until every in-flight
//!   client-initiated MCP handler has completed and written its reply
//!   (a one-ahead buffer in each `_ws` send loop +
//!   [`drain_send_final_and_close`]), then sent as the last text frame
//!   immediately followed by `Close(1000)`. Last chunk ⇒ the
//!   connection is ending; nothing else follows it. No `[DONE]`
//!   sentinel.
//! - Error mid-stream: server sends one final text frame containing
//!   the JSON `ResponseError`, then `Close(1011)`.
//! - Body parse failure: error text frame, `Close(1003)`.
//!
//! Auth lives on the upgrade handshake (`Authorization` header), the
//! same place every other route validates it; the helpers below are
//! invoked only after the upgrade has been accepted.
//!
//! Stage 1 of #193; #194 tracks the migration.

use axum::extract::FromRequestParts;
use axum::extract::ws::{CloseCode, CloseFrame, Message, WebSocket, close_code};
use axum::http::request::Parts;
use futures::{SinkExt, StreamExt};
use futures::stream::SplitStream;
use objectiveai_sdk::error::ResponseError;

// The reverse-attach / pending-request types are now canonical in
// `crate::objectiveai_mcp`. The `pub use` shims keep
// `crate::streaming_ws::SharedSink` etc. resolving for every existing
// call site in the api — the underlying type IS the objectiveai_mcp
// one.
pub use crate::objectiveai_mcp::{
    PendingRequests, ReverseAttachGuard, ReverseAttachHandle, SharedSink,
    new_pending_requests,
};

/// Transport the client wants. Inferred from the request itself: an
/// `Upgrade: websocket` header → [`Transport::WebSocket`], anything
/// else → [`Transport::Sse`]. The SSE handler covers both
/// streamed-SSE and unary-collected responses internally (selected
/// by `body.stream`); we only need to detect an actual WS upgrade
/// here. POST + JSON for unary or SSE never carries `Upgrade`, so
/// it always falls to the SSE branch — which is what unary callers
/// expect.
#[derive(Debug, Clone, Copy, PartialEq, Eq)]
pub enum Transport {
    Sse,
    WebSocket,
}

impl<S> FromRequestParts<S> for Transport
where
    S: Send + Sync,
{
    type Rejection = std::convert::Infallible;
    async fn from_request_parts(parts: &mut Parts, _: &S) -> Result<Self, Self::Rejection> {
        let is_ws_upgrade = parts
            .headers
            .get(axum::http::header::UPGRADE)
            .and_then(|v| v.to_str().ok())
            .map(|v| v.eq_ignore_ascii_case("websocket"))
            .unwrap_or(false);
        Ok(if is_ws_upgrade {
            Transport::WebSocket
        } else {
            Transport::Sse
        })
    }
}

use serde::de::DeserializeOwned;

/// Read exactly one text frame from `socket` and deserialize it as `T`.
///
/// Skips pings/pongs/binary frames silently — only a text frame is a
/// valid body. Returns a `ResponseError` describing the failure if
/// the peer closes early, sends something we can't parse, or sends a
/// non-text frame.
///
/// Caller is responsible for closing the socket on error (typically
/// via [`send_error_and_close`]).
pub async fn recv_body_frame<T: DeserializeOwned>(
    socket: &mut WebSocket,
) -> Result<T, ResponseError> {
    loop {
        match socket.recv().await {
            Some(Ok(Message::Text(text))) => {
                return serde_json::from_str::<T>(text.as_str()).map_err(|e| ResponseError {
                    code: 400,
                    message: serde_json::Value::String(format!(
                        "failed to deserialize body frame: {e}"
                    )),
                });
            }
            Some(Ok(Message::Binary(_))) => {
                return Err(ResponseError {
                    code: 400,
                    message: serde_json::Value::String(
                        "expected text body frame, got binary".into(),
                    ),
                });
            }
            // Library handles ping/pong automatically; ignore if surfaced.
            Some(Ok(Message::Ping(_) | Message::Pong(_))) => continue,
            Some(Ok(Message::Close(_))) | None => {
                return Err(ResponseError {
                    code: 400,
                    message: serde_json::Value::String(
                        "peer closed before sending body".into(),
                    ),
                });
            }
            Some(Err(e)) => {
                return Err(ResponseError {
                    code: 400,
                    message: serde_json::Value::String(format!("websocket recv error: {e}")),
                });
            }
        }
    }
}

/// Send `err` as a single text frame, then close with `code`.
///
/// Failures to send are swallowed — the socket is being torn down
/// anyway, and the peer can only do one of the two no-ops (notice the
/// close, or notice nothing because they've already gone).
pub async fn send_error_and_close(socket: &mut WebSocket, err: &ResponseError, code: CloseCode) {
    let frame = serde_json::to_string(err).unwrap_or_else(|_| String::from("{}"));
    let _ = socket.send(Message::Text(frame.into())).await;
    let _ = socket
        .send(Message::Close(Some(CloseFrame {
            code,
            reason: "".into(),
        })))
        .await;
}

/// Split-sink variant. Used after the socket has already been split
/// (which is the order the WS handlers now use so the reverse-attach
/// guard can be built before stream creation). Closes the socket
/// with `Close(1011)` after sending `err` as a text frame; used when
/// setup fails before any chunk has been produced.
pub async fn fatal_setup_error_split(sink: &SharedSink, err: &ResponseError) {
    let frame = serde_json::to_string(err).unwrap_or_else(|_| String::from("{}"));
    {
        let mut guard = sink.lock().await;
        let _ = guard.send(Message::Text(frame.into())).await;
    }
    send_close_split(sink, close_code::ERROR).await;
}

// ────────────────────────────────────────────────────────────────────
// Split-sink variants. Used by `_ws` handlers after splitting the
// socket so the send-side (chunk forwarder) and recv-side (notify
// responder) can write through the same socket concurrently.
// ────────────────────────────────────────────────────────────────────

/// Send one pre-serialized chunk frame. The `_ws` handlers serialize
/// before sending because their one-ahead buffer holds the NEWEST frame
/// back (see [`drain_send_final_and_close`]) — the held value must
/// already be wire-ready. Returns `Err(())` if the peer hung up.
pub async fn send_frame_split(sink: &SharedSink, frame: String) -> Result<(), ()> {
    let mut guard = sink.lock().await;
    guard
        .send(Message::Text(frame.into()))
        .await
        .map_err(|_| ())
}

/// Drain this request's reverse channel: write each `server_request` the
/// per-request proxy emits onto the shared WS sink (the proxy → CLI
/// direction). Ends when the channel — and its proxy — drops (all sender
/// halves gone), i.e. at request/WS end.
pub async fn drain_reverse_channel(
    sink: SharedSink,
    mut req_rx: tokio::sync::mpsc::UnboundedReceiver<
        objectiveai_sdk::client_objectiveai_mcp::server_request::Request,
    >,
) {
    while let Some(req) = req_rx.recv().await {
        let frame = match serde_json::to_string(&req) {
            Ok(s) => s,
            Err(_) => continue,
        };
        let mut guard = sink.lock().await;
        if guard.send(Message::Text(frame.into())).await.is_err() {
            return;
        }
    }
}

/// Send a `Close(code)` frame, ignoring any I/O error.
pub async fn send_close_split(sink: &SharedSink, code: CloseCode) {
    let mut guard = sink.lock().await;
    let _ = guard
        .send(Message::Close(Some(CloseFrame {
            code,
            reason: "".into(),
        })))
        .await;
}

/// Drain any in-flight client_request handlers (the tasks `recv_loop`
/// spawned into `tasks`), THEN send the withheld FINAL chunk frame, then
/// the `NORMAL` Close — final chunk and Close go out under ONE sink lock
/// so nothing can interleave between them.
///
/// This is what makes "last chunk = connection end" hold on the wire:
/// the `_ws` handlers' send loops run a one-ahead buffer and hand the
/// stream's LAST frame here instead of sending it inline, so every
/// straggler (a client-initiated MCP op still being served) writes its
/// reply BEFORE the final chunk. A client may therefore treat the final
/// chunk as the end of the whole connection.
///
/// Called on the send-won path. Bounded by the proxy's per-op timeout —
/// every spawned handler resolves eventually — so the wait can't hang
/// indefinitely. `close()` stops further tracking (`recv_loop` is
/// already dropped by the `select!`, so no new handlers arrive);
/// `wait()` blocks until the count hits zero. `final_frame` is `None`
/// when the stream produced nothing (empty stream, setup error already
/// reported, or the peer hung up mid-stream).
pub async fn drain_send_final_and_close(
    tasks: tokio_util::task::TaskTracker,
    sink: &SharedSink,
    final_frame: Option<String>,
) {
    tasks.close();
    tasks.wait().await;
    let mut guard = sink.lock().await;
    if let Some(frame) = final_frame {
        let _ = guard.send(Message::Text(frame.into())).await;
    }
    let _ = guard
        .send(Message::Close(Some(CloseFrame {
            code: close_code::NORMAL,
            reason: "".into(),
        })))
        .await;
}

// PendingRequests, ReverseChannel, ReverseAttachConfig,
// ReverseAttachGuard, ReverseAttachHandle and `new_pending_requests`
// are re-exported at the top of this file from `crate::objectiveai_mcp`.
// `send_server_request` (used by the message-queue forward path) also
// lives there as `objectiveai_mcp::send`.

/// Recv loop: drain the split stream, parse each text frame, and
/// dispatch based on shape.
///
/// - Frames that parse as
///   [`client_request::Request`](objectiveai_sdk::client_objectiveai_mcp::client_request::Request)
///   are dispatched per payload variant. The only payload today is
///   `McpListChanged`, which fans out to every per-MCP GET-SSE
///   subscriber registered under this connection's reverse-attach
///   handle.
/// - Frames that parse as
///   [`server_response::Response`](objectiveai_sdk::client_objectiveai_mcp::server_response::Response)
///   are routed to the pending-request registry: the matching
///   oneshot is taken and fulfilled. Unknown `id` → log + drop.
/// - Frames that match neither shape are logged + dropped.
///
/// Returns when the recv half closes (peer hung up or close frame).
pub async fn recv_loop(
    mut rx: SplitStream<WebSocket>,
    sink: SharedSink,
    pending: PendingRequests,
    channel: objectiveai_mcp_proxy::ReverseChannel,
    tasks: tokio_util::task::TaskTracker,
) {
    use objectiveai_sdk::client_objectiveai_mcp::{
        client_request::Request as ClientRequest,
        server_response::Response as ServerResponse,
    };

    loop {
        let msg = match rx.next().await {
            Some(m) => m,
            None => {
                return;
            }
        };
        let text = match msg {
            Ok(Message::Text(t)) => {
                t
            }
            Ok(Message::Binary(_)) => {
                eprintln!("ignoring binary frame on streaming WS recv side");
                continue;
            }
            Ok(Message::Ping(_) | Message::Pong(_)) => continue,
            Ok(Message::Close(_)) => {
                return;
            }
            Err(e) => {
                eprintln!("streaming WS recv error: {e}");
                return;
            }
        };

        // Parse strategy: try client_request first (the discriminator
        // tag `type` distinguishes it from server_response — they
        // share the `id` field but differ everywhere else), then
        // server_response, then drop.
        if let Ok(request) = serde_json::from_str::<ClientRequest>(text.as_str()) {
            // Proxy-bound client_request: hand it to this request's proxy.
            // `McpListChanged` fires the matching upstream's list-changed
            // callback; the MCP-op variants (ListTools/CallTool/...) run the
            // proxy's aggregated Session ops by response id. The whole
            // deliver→serialize→write is spawned so a slow `call_tool`
            // doesn't block the recv loop from draining further frames.
            let channel = channel.clone();
            let sink = sink.clone();
            // Tracked (not detached) so the handler can keep the WS open
            // — and the FINAL chunk withheld — until this reply is
            // written; see `drain_send_final_and_close`.
            tasks.spawn(async move {
                let response = channel.deliver_client_request(request).await;
                let frame = match serde_json::to_string(&response) {
                    Ok(s) => s,
                    Err(_) => return,
                };
                let mut guard = sink.lock().await;
                let _ = guard.send(Message::Text(frame.into())).await;
            });
            continue;
        }

        if let Ok(response) = serde_json::from_str::<ServerResponse>(text.as_str()) {
            // Demux by type: the 6 MCP variants (`mcp_kind().is_some()`)
            // belong to this request's proxy; `ReadMessageQueue`/`Retrieve`
            // (no mcp_kind) are the API's own (queue delegate + retrieval),
            // awaited on `pending`. The laboratory-transfer ops are ALSO
            // proxy-bound (issued on the proxy's reverse channel) but carry
            // no `mcp_kind`, so they must be routed to the proxy explicitly —
            // otherwise they fall through to the API `pending` map, are not
            // found, and get dropped (hanging the transfer waiter).
            let proxy_bound = response.payload.mcp_kind().is_some()
                || is_laboratory_transfer_response(&response.payload);
            if proxy_bound {
                channel.deliver_response(response);
            } else {
                match pending.remove(&response.id) {
                    Some((_, tx)) => {
                        let _ = tx.send(response);
                    }
                    None => {
                        eprintln!(
                            "dropping server_response for unknown id {:?}",
                            response.id
                        );
                    }
                }
            }
            continue;
        }

        eprintln!("dropping unparseable WS frame (matched neither client_request nor server_response)");
    }
}

/// The proxy-bound laboratory-transfer replies: no `mcp_kind`, but every
/// one was issued on the proxy's reverse channel and must route back to
/// its `pending` map rather than the API's.
fn is_laboratory_transfer_response(
    payload: &objectiveai_sdk::client_objectiveai_mcp::server_response::Payload,
) -> bool {
    use objectiveai_sdk::client_objectiveai_mcp::server_response::Payload;
    matches!(
        payload,
        Payload::LaboratoryExportBegin(_)
            | Payload::LaboratoryExportRead(_)
            | Payload::LaboratoryExportAbort(_)
            | Payload::LaboratoryImportBegin(_)
            | Payload::LaboratoryImportWrite(_)
            | Payload::LaboratoryImportEnd(_)
            | Payload::LaboratoryImportAbort(_)
    )
}