nwg-notifications

A D-Bus notification daemon and notification center for Hyprland and Sway, written in Rust.

Claims org.freedesktop.Notifications, shows popup toasts, and ships a slide-out history panel with Do-Not-Disturb controls and optional waybar integration. Built alongside nwg-dock and nwg-drawer to replace mako in the mac-doc-hyprland stack, but runs standalone.

Features

• D-Bus notification daemon — replaces mako; claims org.freedesktop.Notifications
• Popup toasts — top-right corner, auto-dismiss, click-to-focus sending app
• Deep-linking — clicking a notification tells the app to open the specific item
• Auto-dismiss — popups dismissed when app calls CloseNotification (e.g., Slack read)
• Action buttons — shows Reply/Open/etc. buttons, emits ActionInvoked D-Bus signal
• History panel — slide-out from right, grouped by app with collapse/expand
• Click-outside-to-close — backdrop overlay + Escape key
• Dismiss controls — per-notification, per-app group, or clear all
• Do Not Disturb — toggle via panel button, signal, or waybar right-click menu
• Timed DND — 1 hour, 2 hours, until tomorrow with expiry countdown
• Waybar integration — bell icon with unread count, left-click toggles panel, right-click opens DND menu
• Persistence — notification history saved across restarts with --persist
• Focused monitor — popups appear on the currently focused monitor

Install

Requirements

• Rust 1.95 or later (pinned in rust-toolchain.toml; rustup picks it up automatically)
• GTK4 and gtk4-layer-shell system libraries
• A Wayland compositor with wlr-layer-shell support (Hyprland, Sway)
• A working session D-Bus (every Linux desktop has this — calling it out because nwg-notifications is fundamentally a D-Bus daemon: it claims org.freedesktop.Notifications on the session bus, so installing only the binary without registering a D-Bus service file means apps can't reach it)

Install system dependencies

# Arch Linux
sudo pacman -S gtk4 gtk4-layer-shell

# Ubuntu/Debian
sudo apt install libgtk-4-dev libgtk4-layer-shell-dev

# Fedora
sudo dnf install gtk4-devel gtk4-layer-shell-devel

make install — recommended (one-stop binary + D-Bus service file)

The Makefile install path drops both the binary and the D-Bus service file (the latter always to user-scope, regardless of PREFIX — D-Bus user services are per-user by convention).

Default — system-wide binary + user-scope service:

sudo make install
make install-dbus

Writes:

• nwg-notifications → /usr/local/bin/nwg-notifications
• D-Bus service file → ~/.local/share/dbus-1/services/org.freedesktop.Notifications.service (no sudo)

No-sudo, dev workflow:

make install PREFIX=$HOME/.local BINDIR=$HOME/.cargo/bin
make install-dbus

Distro-parity:

sudo make install PREFIX=/usr
make install-dbus

make upgrade — one-step build + install + daemon restart

For source-build users on an already-installed setup, make upgrade does the whole replace-and-respawn cycle in one command. It builds release, validates that the running daemon's binary path matches where this make upgrade would install (refusing to proceed on a prefix mismatch so you don't end up with a dead daemon), captures the running daemon's args via --dump-args, sends SIGTERM, installs the new binary, and respawns with the same args.

The recommended dev/test recipe — drops the binary at ~/.cargo/bin/nwg-notifications (the same place cargo install would put it), no sudo:

make upgrade PREFIX=$HOME/.local BINDIR=$HOME/.cargo/bin

This is what we use to dogfood every PR — install once, then make upgrade PREFIX=... BINDIR=... for every iteration. It also doubles as the upgrade path for users who originally installed via cargo install nwg-notifications: keep a source clone, run make upgrade against ~/.cargo/bin, and you get the rebuild + install + restart loop without the manual kill-and-respawn dance.

For system-wide installs use sudo make upgrade (or sudo make upgrade PREFIX=/usr for distro-parity) — same prefix-matching guard applies, refusing to proceed if the running daemon lives somewhere else.

Cargo-install users without a source clone should use the manual equivalent — see the "After upgrading" note in the From crates.io subsection below.

From crates.io — Rust-toolchain alternative

cargo install nwg-notifications

This is the right path if you prefer the Rust toolchain workflow over make install. Heads-up: this is a two-step install — cargo install only places the binary at ~/.cargo/bin/nwg-notifications, it doesn't create the D-Bus service file the daemon needs to be reachable. After running the command above, manually create the service file (see D-Bus service below; it's a ~5-line file pointing at the installed binary). Once the service file is in place, the daemon auto-activates the first time any app calls org.freedesktop.Notifications.

For the all-in-one experience, use the make install path above.

After upgrading, restart any long-running daemon process so it picks up new D-Bus surface introduced by the upgrade. The CLI on PATH will be the new binary immediately, but the daemon process started by your session manager (or auto-activated by D-Bus before the upgrade) keeps running the old code until it exits. Quickest restart:

kill $(pidof nwg-notifications) 2>/dev/null || true
# Your session manager (or D-Bus auto-activation on the next notify-send)
# spawns the new binary. Or run `nwg-notifications --persist &` directly.

If you happen to have a source clone of the repo as well, make upgrade PREFIX=$HOME/.local BINDIR=$HOME/.cargo/bin automates the whole replace-and-respawn cycle (and preserves the running daemon's args).

Without this, --update and gdbus call against newly-shipped methods fail with org.freedesktop.DBus.Error.UnknownMethod.

Usage

# With history persistence
nwg-notifications --persist

# Force Sway backend (usually auto-detected)
nwg-notifications --wm sway --persist

D-Bus service

make install-dbus installs this file into ~/.local/share/dbus-1/services/. If you're cargo-installing, create it manually:

# ~/.local/share/dbus-1/services/org.freedesktop.Notifications.service
[D-BUS Service]
Name=org.freedesktop.Notifications
Exec=/home/YOU/.cargo/bin/nwg-notifications --persist

Once registered, the daemon auto-starts the first time any app calls org.freedesktop.Notifications.

Hyprland autostart

# ~/.config/hypr/autostart.conf
exec-once = uwsm-app -- nwg-notifications --persist

Autostart isn't strictly required thanks to D-Bus auto-activation, but it makes the daemon ready before the first notification arrives (avoids a few-hundred-millisecond delay on your first toast).

Signal control

# Toggle notification panel
pkill -f -38 nwg-notifications     # SIGRTMIN+4

# Toggle DND
pkill -f -39 nwg-notifications     # SIGRTMIN+5

# Open DND duration menu
pkill -f -40 nwg-notifications     # SIGRTMIN+6

Waybar integration

Add to ~/.config/waybar/config.jsonc:

"custom/notifications": {
    "exec": "cat $XDG_RUNTIME_DIR/nwg-notifications-status.json 2>/dev/null || echo '{\"text\":\"\",\"alt\":\"empty\",\"class\":\"empty\"}'",
    "return-type": "json",
    "format": "{}",
    "on-click": "pkill -f -38 nwg-notifications",
    "on-click-right": "pkill -f -40 nwg-notifications",
    "signal": 11,
    "interval": "once"
}

The daemon writes its current state to $XDG_RUNTIME_DIR/nwg-notifications-status.json and signals waybar (SIGRTMIN+11, which waybar receives as signal: 11) whenever the state changes — no polling.

Querying notification count

Three mechanisms expose the current pending (unread) count for status-bar widgets, scripts, and external panels (e.g. nwg-panel):

CLI

nwg-notifications --count
# Prints the integer count to stdout. Exits 1 with a stderr error if no
# daemon is running (NO_AUTO_START — won't spawn a daemon).

D-Bus

gdbus call --session \
  --dest org.nwg.Notifications \
  --object-path /org/nwg/Notifications \
  --method org.nwg.Notifications.GetCount

For push-mode subscribers, listen on the CountChanged signal:

dbus-monitor --session "type='signal',interface='org.nwg.Notifications'"

The signal emits only when the count actually changes (delta-tracking), so subscribers don't receive spurious wakeups for no-op state mutations.

Status file

The waybar status JSON includes a count field — useful when you already have SIGRTMIN+11 wired up:

jq -r .count "$XDG_RUNTIME_DIR/nwg-notifications-status.json"

Live config updates

Six knobs take runtime updates without restarting the daemon. Two surfaces:

CLI

# Push individual settings:
nwg-notifications --update --popup-position top-center
nwg-notifications --update --popup-width 600

# Push multiple in one call:
nwg-notifications --update --popup-position top-center --popup-width 600

--update short-circuits before daemon init and uses NO_AUTO_START, so it never spawns a daemon. Exits 1 with a useful error when no daemon is running. Only flags you explicitly pass are pushed — defaults are never sent.

D-Bus

For tooling that prefers the D-Bus surface directly (e.g. nwg-shell-config from Python via pydbus / gi.repository.Gio):

gdbus call --session \
  --dest org.nwg.Notifications \
  --object-path /org/nwg/Notifications \
  --method org.nwg.Notifications.SetPopupPosition '"top-center"'

gdbus call --session \
  --dest org.nwg.Notifications \
  --object-path /org/nwg/Notifications \
  --method org.nwg.Notifications.SetPopupWidth 600

Each setter validates against the same ranges as the matching CLI flag and returns org.freedesktop.DBus.Error.InvalidArgs on bad input. The full set:

What can't be live-updated

--persist, --wm, and --debug are inherently startup-only — restart the daemon to change those.

Theming

Styling is embedded via include_str!; there's no user-writable notifications.css today. If you need to customize appearance, fork the crate and edit assets/notifications.css, or open an issue to discuss exposing it.

Contributing

PRs welcome. main is protected — open from a feature branch. Run make lint (fmt + clippy + test + deny + audit) locally before requesting review.

User-visible PRs add a CHANGELOG bullet under ## [x.y.z] — Unreleased in CHANGELOG.md, following Keep a Changelog.

Background: why not mako?

Mako is great, but:

1. The mac-doc-hyprland stack wanted a single look/feel across the dock, drawer, and notification center — GTK4 layer-shell surfaces make theming coherent across all three.
2. We wanted history + grouping + click-to-focus as first-class features, not add-ons.
3. Writing a D-Bus notification server in Rust on gio::bus_own_name turned out to be less code than expected — no async bridge, no external crate, directly on the glib main loop.

Run nwg-notifications instead of mako, or alongside (they'll race for the name — whichever claimed it first wins).

License

MIT. See LICENSE.