nsproxy-hickory-proto 0.25.4

// Copyright 2015-2016 Benjamin Fry <benjaminfry@me.com>
//
// Licensed under the Apache License, Version 2.0, <LICENSE-APACHE or
// https://apache.org/licenses/LICENSE-2.0> or the MIT license <LICENSE-MIT or
// https://opensource.org/licenses/MIT>, at your option. This file may not be
// copied, modified, or distributed except according to those terms.

//! DNS over TLS I/O stream implementation for Rustls

use alloc::boxed::Box;
use alloc::string::String;
use alloc::sync::Arc;
use core::future::Future;
use core::pin::Pin;
use std::io;
use std::net::SocketAddr;

use rustls::ClientConfig;
use rustls::pki_types::ServerName;
use tokio::net::TcpStream as TokioTcpStream;
use tokio::{self, time::timeout};
use tokio_rustls::TlsConnector;

use crate::runtime::RuntimeProvider;
use crate::runtime::iocompat::{AsyncIoStdAsTokio, AsyncIoTokioAsStd};
use crate::tcp::{DnsTcpStream, TcpStream};
use crate::xfer::{BufDnsStreamHandle, CONNECT_TIMEOUT, StreamReceiver};

/// Predefined type for abstracting the TlsClientStream with TokioTls
pub type TokioTlsClientStream<S> = tokio_rustls::client::TlsStream<AsyncIoStdAsTokio<S>>;

/// Predefined type for abstracting the TlsServerStream with TokioTls
pub type TokioTlsServerStream = tokio_rustls::server::TlsStream<TokioTcpStream>;

/// Predefined type for abstracting the base I/O TlsStream with TokioTls
pub type TlsStream<S> = TcpStream<S>;

/// Initializes a TlsStream with an existing tokio_tls::TlsStream.
///
/// This is intended for use with a TlsListener and Incoming connections
pub fn tls_from_stream<S: DnsTcpStream>(
    stream: S,
    peer_addr: SocketAddr,
) -> (TlsStream<S>, BufDnsStreamHandle) {
    let (message_sender, outbound_messages) = BufDnsStreamHandle::new(peer_addr);
    let stream = TcpStream::from_stream_with_receiver(stream, peer_addr, outbound_messages);
    (stream, message_sender)
}

/// Creates a new TlsStream to the specified name_server
///
/// [RFC 7858](https://tools.ietf.org/html/rfc7858), DNS over TLS, May 2016
///
/// ```text
/// 3.2.  TLS Handshake and Authentication
///
///   Once the DNS client succeeds in connecting via TCP on the well-known
///   port for DNS over TLS, it proceeds with the TLS handshake [RFC5246],
///   following the best practices specified in [BCP195].
///
///   The client will then authenticate the server, if required.  This
///   document does not propose new ideas for authentication.  Depending on
///   the privacy profile in use (Section 4), the DNS client may choose not
///   to require authentication of the server, or it may make use of a
///   trusted Subject Public Key Info (SPKI) Fingerprint pin set.
///
///   After TLS negotiation completes, the connection will be encrypted and
///   is now protected from eavesdropping.
/// ```
///
/// # Arguments
///
/// * `name_server` - IP and Port for the remote DNS resolver
/// * `bind_addr` - IP and port to connect from
/// * `dns_name` - The DNS name associated with a certificate
#[allow(clippy::type_complexity)]
pub fn tls_connect<P: RuntimeProvider>(
    name_server: SocketAddr,
    dns_name: String,
    client_config: Arc<ClientConfig>,
    provider: P,
) -> (
    Pin<
        Box<
            dyn Future<
                    Output = Result<
                        TlsStream<AsyncIoTokioAsStd<TokioTlsClientStream<P::Tcp>>>,
                        io::Error,
                    >,
                > + Send,
        >,
    >,
    BufDnsStreamHandle,
) {
    tls_connect_with_bind_addr(name_server, None, dns_name, client_config, provider)
}

/// Creates a new TlsStream to the specified name_server connecting from a specific address.
///
/// # Arguments
///
/// * `name_server` - IP and Port for the remote DNS resolver
/// * `bind_addr` - IP and port to connect from
/// * `dns_name` - The DNS name associated with a certificate
#[allow(clippy::type_complexity)]
pub fn tls_connect_with_bind_addr<P: RuntimeProvider>(
    name_server: SocketAddr,
    bind_addr: Option<SocketAddr>,
    dns_name: String,
    client_config: Arc<ClientConfig>,
    provider: P,
) -> (
    Pin<
        Box<
            dyn Future<
                    Output = Result<
                        TlsStream<AsyncIoTokioAsStd<TokioTlsClientStream<P::Tcp>>>,
                        io::Error,
                    >,
                > + Send,
        >,
    >,
    BufDnsStreamHandle,
) {
    let (message_sender, outbound_messages) = BufDnsStreamHandle::new(name_server);
    let early_data_enabled = client_config.enable_early_data;
    let tls_connector = TlsConnector::from(client_config).early_data(early_data_enabled);

    // This set of futures collapses the next tcp socket into a stream which can be used for
    //  sending and receiving tcp packets.
    let stream = Box::pin(connect_tls(
        tls_connector,
        name_server,
        bind_addr,
        dns_name,
        outbound_messages,
        provider,
    ));

    (stream, message_sender)
}

/// Creates a new TlsStream to the specified name_server connecting from a specific address.
///
/// # Arguments
///
/// * `name_server` - IP and Port for the remote DNS resolver
/// * `bind_addr` - IP and port to connect from
/// * `dns_name` - The DNS name associated with a certificate
#[allow(clippy::type_complexity)]
pub fn tls_connect_with_future<S, F>(
    future: F,
    name_server: SocketAddr,
    dns_name: String,
    client_config: Arc<ClientConfig>,
) -> (
    Pin<
        Box<
            dyn Future<
                    Output = Result<
                        TlsStream<AsyncIoTokioAsStd<TokioTlsClientStream<S>>>,
                        io::Error,
                    >,
                > + Send,
        >,
    >,
    BufDnsStreamHandle,
)
where
    S: DnsTcpStream,
    F: Future<Output = io::Result<S>> + Send + Unpin + 'static,
{
    let (message_sender, outbound_messages) = BufDnsStreamHandle::new(name_server);
    let early_data_enabled = client_config.enable_early_data;
    let tls_connector = TlsConnector::from(client_config).early_data(early_data_enabled);

    // This set of futures collapses the next tcp socket into a stream which can be used for
    //  sending and receiving tcp packets.
    let stream = Box::pin(connect_tls_with_future(
        tls_connector,
        future,
        name_server,
        dns_name,
        outbound_messages,
    ));

    (stream, message_sender)
}

async fn connect_tls<P: RuntimeProvider>(
    tls_connector: TlsConnector,
    name_server: SocketAddr,
    bind_addr: Option<SocketAddr>,
    dns_name: String,
    outbound_messages: StreamReceiver,
    provider: P,
) -> io::Result<TcpStream<AsyncIoTokioAsStd<TokioTlsClientStream<P::Tcp>>>> {
    let tcp = provider.connect_tcp(name_server, bind_addr, None);
    connect_tls_with_future(tls_connector, tcp, name_server, dns_name, outbound_messages).await
}

async fn connect_tls_with_future<S, F>(
    tls_connector: TlsConnector,
    future: F,
    name_server: SocketAddr,
    server_name: String,
    outbound_messages: StreamReceiver,
) -> io::Result<TcpStream<AsyncIoTokioAsStd<TokioTlsClientStream<S>>>>
where
    S: DnsTcpStream,
    F: Future<Output = io::Result<S>> + Send + Unpin,
{
    let dns_name = match ServerName::try_from(server_name) {
        Ok(name) => name,
        Err(_) => return Err(io::Error::new(io::ErrorKind::InvalidInput, "bad dns_name")),
    };

    let stream = AsyncIoStdAsTokio(future.await?);
    let s = match timeout(CONNECT_TIMEOUT, tls_connector.connect(dns_name, stream)).await {
        Ok(Ok(s)) => s,
        Ok(Err(e)) => {
            return Err(io::Error::new(
                io::ErrorKind::ConnectionRefused,
                format!("tls error: {e}"),
            ));
        }
        Err(_) => {
            return Err(io::Error::new(
                io::ErrorKind::TimedOut,
                format!("TLS handshake timed out after {CONNECT_TIMEOUT:?}"),
            ));
        }
    };

    Ok(TcpStream::from_stream_with_receiver(
        AsyncIoTokioAsStd(s),
        name_server,
        outbound_messages,
    ))
}