#[doc = r" Register block"]
#[repr(C)]
pub struct RegisterBlock {
#[doc = "0x00 - Start UART receiver"]
pub tasks_startrx: TASKS_STARTRX,
#[doc = "0x04 - Stop UART receiver"]
pub tasks_stoprx: TASKS_STOPRX,
#[doc = "0x08 - Start UART transmitter"]
pub tasks_starttx: TASKS_STARTTX,
#[doc = "0x0c - Stop UART transmitter"]
pub tasks_stoptx: TASKS_STOPTX,
_reserved4: [u8; 12usize],
#[doc = "0x1c - Suspend UART"]
pub tasks_suspend: TASKS_SUSPEND,
_reserved5: [u8; 224usize],
#[doc = "0x100 - CTS is activated (set low). Clear To Send."]
pub events_cts: EVENTS_CTS,
#[doc = "0x104 - CTS is deactivated (set high). Not Clear To Send."]
pub events_ncts: EVENTS_NCTS,
#[doc = "0x108 - Data received in RXD"]
pub events_rxdrdy: EVENTS_RXDRDY,
_reserved8: [u8; 16usize],
#[doc = "0x11c - Data sent from TXD"]
pub events_txdrdy: EVENTS_TXDRDY,
_reserved9: [u8; 4usize],
#[doc = "0x124 - Error detected"]
pub events_error: EVENTS_ERROR,
_reserved10: [u8; 28usize],
#[doc = "0x144 - Receiver timeout"]
pub events_rxto: EVENTS_RXTO,
_reserved11: [u8; 184usize],
#[doc = "0x200 - Shortcut register"]
pub shorts: SHORTS,
_reserved12: [u8; 256usize],
#[doc = "0x304 - Enable interrupt"]
pub intenset: INTENSET,
#[doc = "0x308 - Disable interrupt"]
pub intenclr: INTENCLR,
_reserved14: [u8; 372usize],
#[doc = "0x480 - Error source"]
pub errorsrc: ERRORSRC,
_reserved15: [u8; 124usize],
#[doc = "0x500 - Enable UART"]
pub enable: ENABLE,
_reserved16: [u8; 4usize],
#[doc = "0x508 - Unspecified"]
pub psel: PSEL,
#[doc = "0x518 - RXD register"]
pub rxd: RXD,
#[doc = "0x51c - TXD register"]
pub txd: TXD,
_reserved19: [u8; 4usize],
#[doc = "0x524 - Baud rate. Accuracy depends on the HFCLK source selected."]
pub baudrate: BAUDRATE,
_reserved20: [u8; 68usize],
#[doc = "0x56c - Configuration of parity and hardware flow control"]
pub config: CONFIG,
}
#[doc = r" Register block"]
#[repr(C)]
pub struct PSEL {
#[doc = "0x00 - Pin select for RTS"]
pub rts: self::psel::RTS,
#[doc = "0x04 - Pin select for TXD"]
pub txd: self::psel::TXD,
#[doc = "0x08 - Pin select for CTS"]
pub cts: self::psel::CTS,
#[doc = "0x0c - Pin select for RXD"]
pub rxd: self::psel::RXD,
}
#[doc = r" Register block"]
#[doc = "Unspecified"]
pub mod psel;
#[doc = "Start UART receiver"]
pub struct TASKS_STARTRX {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Start UART receiver"]
pub mod tasks_startrx;
#[doc = "Stop UART receiver"]
pub struct TASKS_STOPRX {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Stop UART receiver"]
pub mod tasks_stoprx;
#[doc = "Start UART transmitter"]
pub struct TASKS_STARTTX {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Start UART transmitter"]
pub mod tasks_starttx;
#[doc = "Stop UART transmitter"]
pub struct TASKS_STOPTX {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Stop UART transmitter"]
pub mod tasks_stoptx;
#[doc = "Suspend UART"]
pub struct TASKS_SUSPEND {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Suspend UART"]
pub mod tasks_suspend;
#[doc = "CTS is activated (set low). Clear To Send."]
pub struct EVENTS_CTS {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "CTS is activated (set low). Clear To Send."]
pub mod events_cts;
#[doc = "CTS is deactivated (set high). Not Clear To Send."]
pub struct EVENTS_NCTS {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "CTS is deactivated (set high). Not Clear To Send."]
pub mod events_ncts;
#[doc = "Data received in RXD"]
pub struct EVENTS_RXDRDY {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Data received in RXD"]
pub mod events_rxdrdy;
#[doc = "Data sent from TXD"]
pub struct EVENTS_TXDRDY {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Data sent from TXD"]
pub mod events_txdrdy;
#[doc = "Error detected"]
pub struct EVENTS_ERROR {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Error detected"]
pub mod events_error;
#[doc = "Receiver timeout"]
pub struct EVENTS_RXTO {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Receiver timeout"]
pub mod events_rxto;
#[doc = "Shortcut register"]
pub struct SHORTS {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Shortcut register"]
pub mod shorts;
#[doc = "Enable interrupt"]
pub struct INTENSET {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Enable interrupt"]
pub mod intenset;
#[doc = "Disable interrupt"]
pub struct INTENCLR {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Disable interrupt"]
pub mod intenclr;
#[doc = "Error source"]
pub struct ERRORSRC {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Error source"]
pub mod errorsrc;
#[doc = "Enable UART"]
pub struct ENABLE {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Enable UART"]
pub mod enable;
#[doc = "RXD register"]
pub struct RXD {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "RXD register"]
pub mod rxd;
#[doc = "TXD register"]
pub struct TXD {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "TXD register"]
pub mod txd;
#[doc = "Baud rate. Accuracy depends on the HFCLK source selected."]
pub struct BAUDRATE {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Baud rate. Accuracy depends on the HFCLK source selected."]
pub mod baudrate;
#[doc = "Configuration of parity and hardware flow control"]
pub struct CONFIG {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Configuration of parity and hardware flow control"]
pub mod config;