#[doc = r" Register block"]
#[repr(C)]
pub struct RegisterBlock {
_reserved0: [u8; 16usize],
#[doc = "0x10 - Start SPI transaction"]
pub tasks_start: TASKS_START,
#[doc = "0x14 - Stop SPI transaction"]
pub tasks_stop: TASKS_STOP,
_reserved2: [u8; 4usize],
#[doc = "0x1c - Suspend SPI transaction"]
pub tasks_suspend: TASKS_SUSPEND,
#[doc = "0x20 - Resume SPI transaction"]
pub tasks_resume: TASKS_RESUME,
_reserved4: [u8; 224usize],
#[doc = "0x104 - SPI transaction has stopped"]
pub events_stopped: EVENTS_STOPPED,
_reserved5: [u8; 8usize],
#[doc = "0x110 - End of RXD buffer reached"]
pub events_endrx: EVENTS_ENDRX,
_reserved6: [u8; 4usize],
#[doc = "0x118 - End of RXD buffer and TXD buffer reached"]
pub events_end: EVENTS_END,
_reserved7: [u8; 4usize],
#[doc = "0x120 - End of TXD buffer reached"]
pub events_endtx: EVENTS_ENDTX,
_reserved8: [u8; 40usize],
#[doc = "0x14c - Transaction started"]
pub events_started: EVENTS_STARTED,
_reserved9: [u8; 176usize],
#[doc = "0x200 - Shortcut register"]
pub shorts: SHORTS,
_reserved10: [u8; 256usize],
#[doc = "0x304 - Enable interrupt"]
pub intenset: INTENSET,
#[doc = "0x308 - Disable interrupt"]
pub intenclr: INTENCLR,
_reserved12: [u8; 244usize],
#[doc = "0x400 - Stall status for EasyDMA RAM accesses. The fields in this register is set to STALL by hardware whenever a stall occurres and can be cleared (set to NOSTALL) by the CPU."]
pub stallstat: STALLSTAT,
_reserved13: [u8; 252usize],
#[doc = "0x500 - Enable SPIM"]
pub enable: ENABLE,
_reserved14: [u8; 4usize],
#[doc = "0x508 - Unspecified"]
pub psel: PSEL,
_reserved15: [u8; 12usize],
#[doc = "0x524 - SPI frequency. Accuracy depends on the HFCLK source selected."]
pub frequency: FREQUENCY,
_reserved16: [u8; 12usize],
#[doc = "0x534 - RXD EasyDMA channel"]
pub rxd: RXD,
#[doc = "0x544 - TXD EasyDMA channel"]
pub txd: TXD,
#[doc = "0x554 - Configuration register"]
pub config: CONFIG,
_reserved19: [u8; 8usize],
#[doc = "0x560 - Unspecified"]
pub iftiming: IFTIMING,
#[doc = "0x568 - Polarity of CSN output"]
pub csnpol: CSNPOL,
#[doc = "0x56c - Pin select for DCX signal"]
pub pseldcx: PSELDCX,
#[doc = "0x570 - DCX configuration"]
pub dcxcnt: DCXCNT,
_reserved23: [u8; 76usize],
#[doc = "0x5c0 - Byte transmitted after TXD.MAXCNT bytes have been transmitted in the case when RXD.MAXCNT is greater than TXD.MAXCNT"]
pub orc: ORC,
}
#[doc = r" Register block"]
#[repr(C)]
pub struct PSEL {
#[doc = "0x00 - Pin select for SCK"]
pub sck: self::psel::SCK,
#[doc = "0x04 - Pin select for MOSI signal"]
pub mosi: self::psel::MOSI,
#[doc = "0x08 - Pin select for MISO signal"]
pub miso: self::psel::MISO,
#[doc = "0x0c - Pin select for CSN"]
pub csn: self::psel::CSN,
}
#[doc = r" Register block"]
#[doc = "Unspecified"]
pub mod psel;
#[doc = r" Register block"]
#[repr(C)]
pub struct RXD {
#[doc = "0x00 - Data pointer"]
pub ptr: self::rxd::PTR,
#[doc = "0x04 - Maximum number of bytes in receive buffer"]
pub maxcnt: self::rxd::MAXCNT,
#[doc = "0x08 - Number of bytes transferred in the last transaction"]
pub amount: self::rxd::AMOUNT,
#[doc = "0x0c - EasyDMA list type"]
pub list: self::rxd::LIST,
}
#[doc = r" Register block"]
#[doc = "RXD EasyDMA channel"]
pub mod rxd;
#[doc = r" Register block"]
#[repr(C)]
pub struct TXD {
#[doc = "0x00 - Data pointer"]
pub ptr: self::txd::PTR,
#[doc = "0x04 - Number of bytes in transmit buffer"]
pub maxcnt: self::txd::MAXCNT,
#[doc = "0x08 - Number of bytes transferred in the last transaction"]
pub amount: self::txd::AMOUNT,
#[doc = "0x0c - EasyDMA list type"]
pub list: self::txd::LIST,
}
#[doc = r" Register block"]
#[doc = "TXD EasyDMA channel"]
pub mod txd;
#[doc = r" Register block"]
#[repr(C)]
pub struct IFTIMING {
#[doc = "0x00 - Sample delay for input serial data on MISO"]
pub rxdelay: self::iftiming::RXDELAY,
#[doc = "0x04 - Minimum duration between edge of CSN and edge of SCK and minimum duration CSN must stay high between transactions"]
pub csndur: self::iftiming::CSNDUR,
}
#[doc = r" Register block"]
#[doc = "Unspecified"]
pub mod iftiming;
#[doc = "Start SPI transaction"]
pub struct TASKS_START {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Start SPI transaction"]
pub mod tasks_start;
#[doc = "Stop SPI transaction"]
pub struct TASKS_STOP {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Stop SPI transaction"]
pub mod tasks_stop;
#[doc = "Suspend SPI transaction"]
pub struct TASKS_SUSPEND {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Suspend SPI transaction"]
pub mod tasks_suspend;
#[doc = "Resume SPI transaction"]
pub struct TASKS_RESUME {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Resume SPI transaction"]
pub mod tasks_resume;
#[doc = "SPI transaction has stopped"]
pub struct EVENTS_STOPPED {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "SPI transaction has stopped"]
pub mod events_stopped;
#[doc = "End of RXD buffer reached"]
pub struct EVENTS_ENDRX {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "End of RXD buffer reached"]
pub mod events_endrx;
#[doc = "End of RXD buffer and TXD buffer reached"]
pub struct EVENTS_END {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "End of RXD buffer and TXD buffer reached"]
pub mod events_end;
#[doc = "End of TXD buffer reached"]
pub struct EVENTS_ENDTX {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "End of TXD buffer reached"]
pub mod events_endtx;
#[doc = "Transaction started"]
pub struct EVENTS_STARTED {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Transaction started"]
pub mod events_started;
#[doc = "Shortcut register"]
pub struct SHORTS {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Shortcut register"]
pub mod shorts;
#[doc = "Enable interrupt"]
pub struct INTENSET {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Enable interrupt"]
pub mod intenset;
#[doc = "Disable interrupt"]
pub struct INTENCLR {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Disable interrupt"]
pub mod intenclr;
#[doc = "Stall status for EasyDMA RAM accesses. The fields in this register is set to STALL by hardware whenever a stall occurres and can be cleared (set to NOSTALL) by the CPU."]
pub struct STALLSTAT {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Stall status for EasyDMA RAM accesses. The fields in this register is set to STALL by hardware whenever a stall occurres and can be cleared (set to NOSTALL) by the CPU."]
pub mod stallstat;
#[doc = "Enable SPIM"]
pub struct ENABLE {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Enable SPIM"]
pub mod enable;
#[doc = "SPI frequency. Accuracy depends on the HFCLK source selected."]
pub struct FREQUENCY {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "SPI frequency. Accuracy depends on the HFCLK source selected."]
pub mod frequency;
#[doc = "Configuration register"]
pub struct CONFIG {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Configuration register"]
pub mod config;
#[doc = "Polarity of CSN output"]
pub struct CSNPOL {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Polarity of CSN output"]
pub mod csnpol;
#[doc = "Pin select for DCX signal"]
pub struct PSELDCX {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Pin select for DCX signal"]
pub mod pseldcx;
#[doc = "DCX configuration"]
pub struct DCXCNT {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "DCX configuration"]
pub mod dcxcnt;
#[doc = "Byte transmitted after TXD.MAXCNT bytes have been transmitted in the case when RXD.MAXCNT is greater than TXD.MAXCNT"]
pub struct ORC {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Byte transmitted after TXD.MAXCNT bytes have been transmitted in the case when RXD.MAXCNT is greater than TXD.MAXCNT"]
pub mod orc;