#[doc = r"Register block"]
#[repr(C)]
pub struct RegisterBlock {
#[doc = "0x00 - Start UART receiver"]
pub tasks_startrx: crate::Reg<tasks_startrx::TASKS_STARTRX_SPEC>,
#[doc = "0x04 - Stop UART receiver"]
pub tasks_stoprx: crate::Reg<tasks_stoprx::TASKS_STOPRX_SPEC>,
#[doc = "0x08 - Start UART transmitter"]
pub tasks_starttx: crate::Reg<tasks_starttx::TASKS_STARTTX_SPEC>,
#[doc = "0x0c - Stop UART transmitter"]
pub tasks_stoptx: crate::Reg<tasks_stoptx::TASKS_STOPTX_SPEC>,
_reserved4: [u8; 0x0c],
#[doc = "0x1c - Suspend UART"]
pub tasks_suspend: crate::Reg<tasks_suspend::TASKS_SUSPEND_SPEC>,
_reserved5: [u8; 0xe0],
#[doc = "0x100 - CTS is activated (set low). Clear To Send."]
pub events_cts: crate::Reg<events_cts::EVENTS_CTS_SPEC>,
#[doc = "0x104 - CTS is deactivated (set high). Not Clear To Send."]
pub events_ncts: crate::Reg<events_ncts::EVENTS_NCTS_SPEC>,
#[doc = "0x108 - Data received in RXD"]
pub events_rxdrdy: crate::Reg<events_rxdrdy::EVENTS_RXDRDY_SPEC>,
_reserved8: [u8; 0x10],
#[doc = "0x11c - Data sent from TXD"]
pub events_txdrdy: crate::Reg<events_txdrdy::EVENTS_TXDRDY_SPEC>,
_reserved9: [u8; 0x04],
#[doc = "0x124 - Error detected"]
pub events_error: crate::Reg<events_error::EVENTS_ERROR_SPEC>,
_reserved10: [u8; 0x1c],
#[doc = "0x144 - Receiver timeout"]
pub events_rxto: crate::Reg<events_rxto::EVENTS_RXTO_SPEC>,
_reserved11: [u8; 0xb8],
#[doc = "0x200 - Shortcuts between local events and tasks"]
pub shorts: crate::Reg<shorts::SHORTS_SPEC>,
_reserved12: [u8; 0x0100],
#[doc = "0x304 - Enable interrupt"]
pub intenset: crate::Reg<intenset::INTENSET_SPEC>,
#[doc = "0x308 - Disable interrupt"]
pub intenclr: crate::Reg<intenclr::INTENCLR_SPEC>,
_reserved14: [u8; 0x0174],
#[doc = "0x480 - Error source"]
pub errorsrc: crate::Reg<errorsrc::ERRORSRC_SPEC>,
_reserved15: [u8; 0x7c],
#[doc = "0x500 - Enable UART"]
pub enable: crate::Reg<enable::ENABLE_SPEC>,
_reserved16: [u8; 0x04],
#[doc = "0x508..0x518 - Unspecified"]
pub psel: PSEL,
#[doc = "0x518 - RXD register"]
pub rxd: crate::Reg<rxd::RXD_SPEC>,
#[doc = "0x51c - TXD register"]
pub txd: crate::Reg<txd::TXD_SPEC>,
_reserved19: [u8; 0x04],
#[doc = "0x524 - Baud rate. Accuracy depends on the HFCLK source selected."]
pub baudrate: crate::Reg<baudrate::BAUDRATE_SPEC>,
_reserved20: [u8; 0x44],
#[doc = "0x56c - Configuration of parity and hardware flow control"]
pub config: crate::Reg<config::CONFIG_SPEC>,
}
#[doc = r"Register block"]
#[repr(C)]
pub struct PSEL {
#[doc = "0x00 - Pin select for RTS"]
pub rts: crate::Reg<self::psel::rts::RTS_SPEC>,
#[doc = "0x04 - Pin select for TXD"]
pub txd: crate::Reg<self::psel::txd::TXD_SPEC>,
#[doc = "0x08 - Pin select for CTS"]
pub cts: crate::Reg<self::psel::cts::CTS_SPEC>,
#[doc = "0x0c - Pin select for RXD"]
pub rxd: crate::Reg<self::psel::rxd::RXD_SPEC>,
}
#[doc = r"Register block"]
#[doc = "Unspecified"]
pub mod psel;
#[doc = "TASKS_STARTRX register accessor: an alias for `Reg<TASKS_STARTRX_SPEC>`"]
pub type TASKS_STARTRX = crate::Reg<tasks_startrx::TASKS_STARTRX_SPEC>;
#[doc = "Start UART receiver"]
pub mod tasks_startrx;
#[doc = "TASKS_STOPRX register accessor: an alias for `Reg<TASKS_STOPRX_SPEC>`"]
pub type TASKS_STOPRX = crate::Reg<tasks_stoprx::TASKS_STOPRX_SPEC>;
#[doc = "Stop UART receiver"]
pub mod tasks_stoprx;
#[doc = "TASKS_STARTTX register accessor: an alias for `Reg<TASKS_STARTTX_SPEC>`"]
pub type TASKS_STARTTX = crate::Reg<tasks_starttx::TASKS_STARTTX_SPEC>;
#[doc = "Start UART transmitter"]
pub mod tasks_starttx;
#[doc = "TASKS_STOPTX register accessor: an alias for `Reg<TASKS_STOPTX_SPEC>`"]
pub type TASKS_STOPTX = crate::Reg<tasks_stoptx::TASKS_STOPTX_SPEC>;
#[doc = "Stop UART transmitter"]
pub mod tasks_stoptx;
#[doc = "TASKS_SUSPEND register accessor: an alias for `Reg<TASKS_SUSPEND_SPEC>`"]
pub type TASKS_SUSPEND = crate::Reg<tasks_suspend::TASKS_SUSPEND_SPEC>;
#[doc = "Suspend UART"]
pub mod tasks_suspend;
#[doc = "EVENTS_CTS register accessor: an alias for `Reg<EVENTS_CTS_SPEC>`"]
pub type EVENTS_CTS = crate::Reg<events_cts::EVENTS_CTS_SPEC>;
#[doc = "CTS is activated (set low). Clear To Send."]
pub mod events_cts;
#[doc = "EVENTS_NCTS register accessor: an alias for `Reg<EVENTS_NCTS_SPEC>`"]
pub type EVENTS_NCTS = crate::Reg<events_ncts::EVENTS_NCTS_SPEC>;
#[doc = "CTS is deactivated (set high). Not Clear To Send."]
pub mod events_ncts;
#[doc = "EVENTS_RXDRDY register accessor: an alias for `Reg<EVENTS_RXDRDY_SPEC>`"]
pub type EVENTS_RXDRDY = crate::Reg<events_rxdrdy::EVENTS_RXDRDY_SPEC>;
#[doc = "Data received in RXD"]
pub mod events_rxdrdy;
#[doc = "EVENTS_TXDRDY register accessor: an alias for `Reg<EVENTS_TXDRDY_SPEC>`"]
pub type EVENTS_TXDRDY = crate::Reg<events_txdrdy::EVENTS_TXDRDY_SPEC>;
#[doc = "Data sent from TXD"]
pub mod events_txdrdy;
#[doc = "EVENTS_ERROR register accessor: an alias for `Reg<EVENTS_ERROR_SPEC>`"]
pub type EVENTS_ERROR = crate::Reg<events_error::EVENTS_ERROR_SPEC>;
#[doc = "Error detected"]
pub mod events_error;
#[doc = "EVENTS_RXTO register accessor: an alias for `Reg<EVENTS_RXTO_SPEC>`"]
pub type EVENTS_RXTO = crate::Reg<events_rxto::EVENTS_RXTO_SPEC>;
#[doc = "Receiver timeout"]
pub mod events_rxto;
#[doc = "SHORTS register accessor: an alias for `Reg<SHORTS_SPEC>`"]
pub type SHORTS = crate::Reg<shorts::SHORTS_SPEC>;
#[doc = "Shortcuts between local events and tasks"]
pub mod shorts;
#[doc = "INTENSET register accessor: an alias for `Reg<INTENSET_SPEC>`"]
pub type INTENSET = crate::Reg<intenset::INTENSET_SPEC>;
#[doc = "Enable interrupt"]
pub mod intenset;
#[doc = "INTENCLR register accessor: an alias for `Reg<INTENCLR_SPEC>`"]
pub type INTENCLR = crate::Reg<intenclr::INTENCLR_SPEC>;
#[doc = "Disable interrupt"]
pub mod intenclr;
#[doc = "ERRORSRC register accessor: an alias for `Reg<ERRORSRC_SPEC>`"]
pub type ERRORSRC = crate::Reg<errorsrc::ERRORSRC_SPEC>;
#[doc = "Error source"]
pub mod errorsrc;
#[doc = "ENABLE register accessor: an alias for `Reg<ENABLE_SPEC>`"]
pub type ENABLE = crate::Reg<enable::ENABLE_SPEC>;
#[doc = "Enable UART"]
pub mod enable;
#[doc = "RXD register accessor: an alias for `Reg<RXD_SPEC>`"]
pub type RXD = crate::Reg<rxd::RXD_SPEC>;
#[doc = "RXD register"]
pub mod rxd;
#[doc = "TXD register accessor: an alias for `Reg<TXD_SPEC>`"]
pub type TXD = crate::Reg<txd::TXD_SPEC>;
#[doc = "TXD register"]
pub mod txd;
#[doc = "BAUDRATE register accessor: an alias for `Reg<BAUDRATE_SPEC>`"]
pub type BAUDRATE = crate::Reg<baudrate::BAUDRATE_SPEC>;
#[doc = "Baud rate. Accuracy depends on the HFCLK source selected."]
pub mod baudrate;
#[doc = "CONFIG register accessor: an alias for `Reg<CONFIG_SPEC>`"]
pub type CONFIG = crate::Reg<config::CONFIG_SPEC>;
#[doc = "Configuration of parity and hardware flow control"]
pub mod config;