[−][src]Struct nrf52832_hal::nrf52832_pac::radio::RegisterBlock
Register block
Fields
tasks_txen: TASKS_TXEN
0x00 - Enable RADIO in TX mode
tasks_rxen: TASKS_RXEN
0x04 - Enable RADIO in RX mode
tasks_start: TASKS_START
0x08 - Start RADIO
tasks_stop: TASKS_STOP
0x0c - Stop RADIO
tasks_disable: TASKS_DISABLE
0x10 - Disable RADIO
tasks_rssistart: TASKS_RSSISTART
0x14 - Start the RSSI and take one single sample of the receive signal strength.
tasks_rssistop: TASKS_RSSISTOP
0x18 - Stop the RSSI measurement
tasks_bcstart: TASKS_BCSTART
0x1c - Start the bit counter
tasks_bcstop: TASKS_BCSTOP
0x20 - Stop the bit counter
events_ready: EVENTS_READY
0x100 - RADIO has ramped up and is ready to be started
events_address: EVENTS_ADDRESS
0x104 - Address sent or received
events_payload: EVENTS_PAYLOAD
0x108 - Packet payload sent or received
events_end: EVENTS_END
0x10c - Packet sent or received
events_disabled: EVENTS_DISABLED
0x110 - RADIO has been disabled
events_devmatch: EVENTS_DEVMATCH
0x114 - A device address match occurred on the last received packet
events_devmiss: EVENTS_DEVMISS
0x118 - No device address match occurred on the last received packet
events_rssiend: EVENTS_RSSIEND
0x11c - Sampling of receive signal strength complete.
events_bcmatch: EVENTS_BCMATCH
0x128 - Bit counter reached bit count value.
events_crcok: EVENTS_CRCOK
0x130 - Packet received with CRC ok
events_crcerror: EVENTS_CRCERROR
0x134 - Packet received with CRC error
shorts: SHORTS
0x200 - Shortcut register
intenset: INTENSET
0x304 - Enable interrupt
intenclr: INTENCLR
0x308 - Disable interrupt
crcstatus: CRCSTATUS
0x400 - CRC status
rxmatch: RXMATCH
0x408 - Received address
rxcrc: RXCRC
0x40c - CRC field of previously received packet
dai: DAI
0x410 - Device address match index
packetptr: PACKETPTR
0x504 - Packet pointer
frequency: FREQUENCY
0x508 - Frequency
txpower: TXPOWER
0x50c - Output power
mode: MODE
0x510 - Data rate and modulation
pcnf0: PCNF0
0x514 - Packet configuration register 0
pcnf1: PCNF1
0x518 - Packet configuration register 1
base0: BASE0
0x51c - Base address 0
base1: BASE1
0x520 - Base address 1
prefix0: PREFIX0
0x524 - Prefixes bytes for logical addresses 0-3
prefix1: PREFIX1
0x528 - Prefixes bytes for logical addresses 4-7
txaddress: TXADDRESS
0x52c - Transmit address select
rxaddresses: RXADDRESSES
0x530 - Receive address select
crccnf: CRCCNF
0x534 - CRC configuration
crcpoly: CRCPOLY
0x538 - CRC polynomial
crcinit: CRCINIT
0x53c - CRC initial value
unused0: UNUSED0
0x540 - Unspecified
tifs: TIFS
0x544 - Inter Frame Spacing in us
rssisample: RSSISAMPLE
0x548 - RSSI sample
state: STATE
0x550 - Current radio state
datawhiteiv: DATAWHITEIV
0x554 - Data whitening initial value
bcc: BCC
0x560 - Bit counter compare
dab: [DAB; 8]
0x600 - Description collection[0]: Device address base segment 0
dap: [DAP; 8]
0x620 - Description collection[0]: Device address prefix 0
dacnf: DACNF
0x640 - Device address match configuration
modecnf0: MODECNF0
0x650 - Radio mode configuration register 0
power: POWER
0xffc - Peripheral power control
Auto Trait Implementations
impl Send for RegisterBlock
impl Send for RegisterBlock
impl !Sync for RegisterBlock
impl !Sync for RegisterBlock
Blanket Implementations
impl<T, U> TryFrom for T where
T: From<U>,
[src]
impl<T, U> TryFrom for T where
T: From<U>,
type Error = !
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
try_from
)Performs the conversion.
impl<T> From for T
[src]
impl<T> From for T
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
try_from
)Performs the conversion.
impl<T, U> Into for T where
U: From<T>,
[src]
impl<T, U> Into for T where
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
impl<T> Borrow for T where
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
impl<T> BorrowMut for T where
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
impl<T> Any for T where
T: 'static + ?Sized,
[src]
impl<T> Any for T where
T: 'static + ?Sized,
fn get_type_id(&self) -> TypeId
[src]
fn get_type_id(&self) -> TypeId
🔬 This is a nightly-only experimental API. (get_type_id
)
this method will likely be replaced by an associated static
Gets the TypeId
of self
. Read more