netlink_wi 0.8.0

use neli::consts::genl::Cmd;
use neli_proc_macros::neli_enum;

/// Supported nl80211 commands.
///
/// nl80211_commands enum from https://github.com/torvalds/linux/blob/master/include/uapi/linux/nl80211.h
#[neli_enum(serialized_type = "u8")]
pub(crate) enum Command {
    Unspec = 0,

    /// Request information about a wiphy (physical wireless device) or dump
    /// request to get a list of all present wiphys.
    GetWiphy = 1,
    SetWiphy = 2,
    NewWiphy = 3,
    DelWiphy = 4,

    /// Request an interface's configuration. Either a dump request for all
    /// interfaces or a specific get with a single NL80211_ATTR_IFINDEX is supported.
    GetInterface = 5,
    /// Set type of a virtual interface,
    /// requires NL80211_ATTR_IFINDEX and NL80211_ATTR_IFTYPE.
    SetInterface = 6,
    NewInterface = 7,
    DelInterface = 8,

    GetKey = 9,
    SetKey = 10,
    NewKey = 11,
    DelKey = 12,

    GetBeacon = 13,
    SetBeacon = 14,
    StartAp = 15,
    /// = StartAp
    NewBeacon = 15,
    StopAp = 16,
    /// = StopAp
    DelBeacon = 16,

    GetStation = 17,
    SetStation = 18,
    NewStation = 19,
    DelStation = 20,

    GetMpath = 21,
    SetMpath = 22,
    NewMpath = 23,
    DelMpath = 24,

    SetBss = 25,

    SetReg = 26,
    ReqSetReg = 27,

    GetMeshConfig = 28,
    SetMeshConfig = 29,
    /// reserved; not used
    SetMgmtExtraIe = 30,

    /// Ask the wireless core to send us its currently set regulatory domain.
    GetReg = 31,

    GetScan = 32,
    /// Trigger a new scan with the given parameters.
    /// NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
    /// probe requests at CCK rate or not. %NL80211_ATTR_BSSID can be used to
    /// specify a BSSID to scan for; if not included, the wildcard BSSID will
    /// be used.
    TriggerScan = 33,
    NewScanResults = 34,
    ScanAborted = 35,

    RegChange = 36,

    Authenticate = 37,
    Associate = 38,
    Deauthenticate = 39,
    Disassociate = 40,

    MichaelMicFailure = 41,

    RegBeaconHint = 42,

    JoinIbss = 43,
    LeaveIbss = 44,

    Testmode = 45,

    Connect = 46,
    Roam = 47,
    Disconnect = 48,

    SetWiphyNetns = 49,

    GetSurvey = 50,
    NewSurveyResults = 51,

    SetPmksa = 52,
    DelPmksa = 53,
    FlushPmksa = 54,

    RemainOnChannel = 55,
    CancelRemainOnChannel = 56,

    SetTxBitrateMask = 57,

    RegisterFrame = 58,
    /// = RegisterFrame
    RegisterAction = 58,
    Frame = 59,
    /// = Frame,
    Action = 59,
    FrameTxStatus = 60,
    /// = FrameTxStatus,
    ActionTxStatus = 60,

    SetPowerSave = 61,
    GetPowerSave = 62,

    SetCqm = 63,
    NotifyCqm = 64,

    /// Set the channel (using NL80211_ATTR_WIPHY_FREQ and the attributes
    /// determining channel width) the given interface (identifed by
    /// NL80211_ATTR_IFINDEX) shall operate on. In case multiple channels are
    /// supported by the device, the mechanism with which it switches channels
    /// is implementation-defined. When a monitor interface is given, it can
    /// only switch channel while no other interfaces are operating to avoid
    /// disturbing the operation of any other interfaces, and other interfaces
    /// will again take precedence when they are used.
    SetChannel = 65,
    SetWdsPeer = 66,

    FrameWaitCancel = 67,

    JoinMesh = 68,
    LeaveMesh = 69,

    UnprotDeauthenticate = 70,
    UnprotDisassociate = 71,

    NewPeerCandidate = 72,

    GetWowlan = 73,
    SetWowlan = 74,

    StartSchedScan = 75,
    StopSchedScan = 76,
    SchedScanResults = 77,
    SchedScanStopped = 78,

    SetRekeyOffload = 79,

    PmksaCandidate = 80,

    TdlsOper = 81,
    TdlsMgmt = 82,

    UnexpectedFrame = 83,

    ProbeClient = 84,

    RegisterBeacons = 85,

    Unexpected4addrFrame = 86,

    SetNoackMap = 87,

    ChSwitchNotify = 88,

    StartP2pDevice = 89,
    StopP2pDevice = 90,

    ConnFailed = 91,

    SetMcastRate = 92,

    SetMacAcl = 93,

    RadarDetect = 94,

    GetProtocolFeatures = 95,

    UpdateFtIes = 96,
    FtEvent = 97,

    CritProtocolStart = 98,
    CritProtocolStop = 99,

    GetCoalesce = 100,
    SetCoalesce = 101,

    ChannelSwitch = 102,

    Vendor = 103,

    SetQosMap = 104,

    AddTxTs = 105,
    DelTxTs = 106,

    GetMpp = 107,

    JoinOcb = 108,
    LeaveOcb = 109,

    ChSwitchStartedNotify = 110,

    TdlsChannelSwitch = 111,
    TdlsCancelChannelSwitch = 112,

    WiphyRegChange = 113,

    AbortScan = 114,

    StartNan = 115,
    StopNan = 116,
    AddNanFunction = 117,
    DelNanFunction = 118,
    ChangeNanConfig = 119,
    NanMatch = 120,

    SetMulticastToUnicast = 121,

    UpdateConnectParams = 122,

    SetPmk = 123,
    DelPmk = 124,

    PortAuthorized = 125,

    ReloadRegdb = 126,

    ExternalAuth = 127,

    StaOpmodeChanged = 128,

    ControlPortFrame = 129,

    GetFtmResponderStats = 130,

    PeerMeasurementStart = 131,
    PeerMeasurementResult = 132,
    PeerMeasurementComplete = 133,

    NotifyRadar = 134,

    UpdateOweInfo = 135,

    ProbeMeshLink = 136,

    SetTidConfig = 137,

    UnprotBeacon = 138,

    ControlPortFrameTxStatus = 139,

    SetSarSpecs = 140,

    ObssColorCollision = 141,

    ColorChangeRequest = 142,

    ColorChangeStarted = 143,
    ColorChangeAborted = 144,
    ColorChangeCompleted = 145,

    SetFilsAad = 146,

    AssocComeback = 147,

    AddLink = 148,
    RemoveLink = 149,

    AddLinkSta = 150,
    ModifyLinkSta = 151,
    RemoveLinkSta = 152,

    SetHwTimestamp = 153,

    LinksRemoved = 154,

    SetTidToLinkMapping = 155,

    AssocMloReconf = 156,
    EpcsCfg = 157,

    NanNextDwNotification = 158,
    NanClusterJoined = 159,
}

impl Cmd for Command {}